Update available last night now gone!! - Sony Ericsson XPERIA X10 Mini

Last night I tried OTA update to see if anything was available yet and it said there was an update but it had to be done from a PC!
So today after work i've fired it up through SEU and it says I am up to date, double checked OTA and it says the same thing
Any one else have this happen?

SE's servers are doing weird things at the moment, I've been unable to reliably download firmware to use the repair function for a couple days now.

Happened to me too thismorning actually. The phone said there was an update but it was only available over the computer. Haven't tried plugging it in cause I don't really wanna loose root even if it's 2.1

I did a repair the other night and I got some new stock apps now. But the build version is the same. I did a repair a week ago and I didnt get this app. Its called smart search. Looks like a smart dialer from se. Maybe the update was just some small update?
ISent from my U20i using XDA App

Related

Very weak GSM signal!

Hey guys,
I really really really need your help on that.
A couple of weeks ago, I decided to upgrade my X10i (Android1.6) from build 24 to 26. I tried to do it OTA but I couldn't. I tried several times clicking on the "Update now" option on the "Software Update" feature but I always get a message saying "No update available". Then, I found a way to update my phone here in XDA-DEVELOPERS that requires rooting the device. I successfully upgraded it, and everything was going well. I did not notice any major changes but better performance of course.
When SE announced that they are going to release the 2.1 update, I read an article about the update, and it was saying that only non-rooted devices may be able to get the update sooner and those with rooted devices need to wait for unknown period. So, I looked over the web for debranding solution, and found one that uses SE software called "PC Suite 2.0". After installing the SW and debranding my device, I noticed that my device GSM signal drops down so easily. I never saw my device getting full 4 bars since then, always 3 or less. Even more, I can not make calls inside buildings (1 bar / no signal). When I make calls while driving, I get disconnected every 1 minute > ("No service")
I decided to turn my mobile off, and insert the SIM to my other phone "HTC Hero" until SE releases the new update (2.1). I, unfortunately, had to wait ~ 6 weeks till that day, and when I downloaded the update I didn't notice any difference. I tried the Nordic thing, and I tried the original update. No one of them seems to get my device any better signal reception.
Please guys, I need an urgent help.
UPDATE:
Just noticed that when I put my x10i on matt surface, the signal all gone. When putting it on wooden surface, I get ~2 bars. And when putting it close to my macbook, I get full reception.
I'm not an expert on this kind of things and I really have no clue why is that happening. I just noticed it when I picked my phone up from the matt ground and put it on my wooden table!!
iMohannad said:
UPDATE:
Just noticed that when I put my x10i on matt surface, the signal all gone. When putting it on wooden surface, I get ~2 bars. And when putting it close to my macbook, I get full reception.
I'm not an expert on this kind of things and I really have no clue why is that happening. I just noticed it when I picked my phone up from the matt ground and put it on my wooden table!!
Click to expand...
Click to collapse
I think you, must update after 2.1 nordic version in step 2 to Global version (step 1 update to 2.1 nordic version)
Try with this you loose the root, to update to 2.1 Global is necesary update to nordic 2.1 first.
greetings
G'day Picaron,
I mentioned in the OP that I already tried all the 2.1 options:
"I tried the Nordic thing, and I tried the original update. No one of them seems to get my device any better signal reception."
Any other suggestions?
So, no one knows how to fix it?
X10i is dead after upgradation to 2.1
I also tried to update my previoius version 1.6 to 2.1 torugh SE update service but it bricked my phone. Now I can't switch it on while screen is blank. It viberated while I switch on but stays as it is. I tried numerous times but at the end of installing update it fails. I have tried other options for debranding to Nordic version which flashes till last step but nothing worked and my cell remains dead after restart. I called up SE service people who eventually told me as 2.1 update is expected to be released in KSA within this week so I shall try updating it again once it's released locally (might be fixed).
Can any one help me as how can i get it worked as I bought this through ebay and can't get service backup here??

OTA Amber for EURO DEV ROMS

Hi,
Does anyone have any info or idea if the AMBER update will be available OTA for L920s with the DEV ROM? I don't see that entry in the update schedule page from Nokia. I just chatted with them and they said they have nothing scheduled at the moment, and suggested instead to go back to my ROGERS ROM (not even in my wildest dreams!).
I know I can flash it, but I don't want to go through the pain of doing everything again, including re-setting all my apps et al. If the OTA update comes out in a couple of weeks or so, I don't mind waiting, but I don't want to wait and then realise in a couple of months that it is not coming out and have to flash it anyhow.
Any news? Do we have to start making some noise on Nokia's forums and social media?
Thanks.
--
ARG
abelitin said:
Hi,
Does anyone have any info or idea if the AMBER update will be available OTA for L920s with the DEV ROM? I don't see that entry in the update schedule page from Nokia. I just chatted with them and they said they have nothing scheduled at the moment, and suggested instead to go back to my ROGERS ROM (not even in my wildest dreams!).
I know I can flash it, but I don't want to go through the pain of doing everything again, including re-setting all my apps et al. If the OTA update comes out in a couple of weeks or so, I don't mind waiting, but I don't want to wait and then realise in a couple of months that it is not coming out and have to flash it anyhow.
Any news? Do we have to start making some noise on Nokia's forums and social media?
Thanks.
--
ARG
Click to expand...
Click to collapse
In case anyone else is wondering, I started getting the update OTA last week. I wasn't expecting it so my connection was very slow and I just soft reset it... Apparently, the download got somehow messed up upon resuming. To make a long story short, after it was installed, the screen lock didn't work properly: I could only unlock my phone right after it turned on; after that, it would not respond at all, so I had to soft-reset every time I wanted to unlock the screen -the other option being deactivating the screen lock altogether, but that doesn't look very promising, especially for battery consumption and pocket dials.
As it turns out, I ended up flashing the firmware, which is ironic because I could have done it a while ago when it came out, but didn't want to go through all the hassle.
My only problem now is that some apps that should work, like Nokia Pro Camera, do not allow me to install them. My firmware does say it is the latest version, and it also identifies the Lumia Amber in Details, but the app is not available.
Has anyone else had this issue?
Thanks
--
ARG
abelitin said:
In case anyone else is wondering, I started getting the update OTA last week. I wasn't expecting it so my connection was very slow and I just soft reset it... Apparently, the download got somehow messed up upon resuming. To make a long story short, after it was installed, the screen lock didn't work properly: I could only unlock my phone right after it turned on; after that, it would not respond at all, so I had to soft-reset every time I wanted to unlock the screen -the other option being deactivating the screen lock altogether, but that doesn't look very promising, especially for battery consumption and pocket dials.
As it turns out, I ended up flashing the firmware, which is ironic because I could have done it a while ago when it came out, but didn't want to go through all the hassle.
My only problem now is that some apps that should work, like Nokia Pro Camera, do not allow me to install them. My firmware does say it is the latest version, and it also identifies the Lumia Amber in Details, but the app is not available.
Has anyone else had this issue?
Thanks
--
ARG
Click to expand...
Click to collapse
Nokia Pro was pulled from Market for few days it was due some bugs...Try again now.
What I can see from Navifirm Plus latest ROM version for RM-821 059R4H6 is 3047.0000.1326.2002
boril said:
Nokia Pro was pulled from Market for few days it was due some bugs...Try again now.
What I can see from Navifirm Plus latest ROM version for RM-821 059R4H6 is 3047.0000.1326.2002
Click to expand...
Click to collapse
Thanks. So I did and now it's there...
--
ARG

Is the Update Phone Software Menu Hanging for Anybody else?

I was just playing with my phone and thought I'd check for an update to phone software. Surprisingly, the message that usually pops (saying your OS is up to date) isn't showing up and instead, it just keeps searching. Is something brewing???
Don't know if anything is "brewing" but mine is doing the same as yours...Verizon V980 @ 7:55 AM CST.
What version are you using? Sprint got an update a week or two ago now
Sent from my LG-LS980 using xda app-developers app
I had to reset my phone a month ago and I'm still on VS98010B. Haven't seen a reason to update Is it strange I haven't gotten the update nag?

Z2 rebooting automatically

Hey guys I'm new to the forum so go easy on my
So here's the story, last month when the .314 update came I was to impatient to wait until it got the over the air update so I dowloaded it from XDA flashed it using flash tools. I've done the many times before tomy z2 and also to my previous phones and everything went fine. But this time after around 20% of the flashing was complete the completion bar just got stuck there forever. I waited an hour but nothing seemed to be happening so knowing well that it'll brick my phone I unplugged it from the PC. After some googling I found out that there was a new version of flashtools available so I unisntalled my previous version and installed the new one and flashed the same ftf file again. This time to my relief the flashing went normal and my phone was successpfully updated. After a few hours of use my phone just randomly restarted. I didn't pay any attention to it but in the following days my phone started restarting at the most random times around 3-4 times a day. So obviously I knew that something has gone wrong. So I used my booted my phone into safe mode but the problem presisted, I tried doing a hard reset and then I use SUS to repair it but the problem was still there.I even flashed the singtel version of the same firmware version but even then the phone just randomly rebooted. There's nothing wrong with the sim because I switched the sim too (because some people kept insisting that the sim is to blame although I knew in my case that it wasn't) but as I expected the problem presisted. Now I'm at a loss as to what to do.I bought the phone from singapore but right now I don't live there so I can't claim warranty (even if I could).
So I turn to you, the experts in XDA it would be great help if you guys can guid me to a solution or atlesat tell me what the hell is actually wrong with the phone.
Ps: the restarts are entirely random. eg: I can play asphault for hours or shoot 4K for a long time without any problems but then I try texting someone and the phone restarts.
silver1704 said:
Hey guys I'm new to the forum so go easy on my
So here's the story, last month when the .314 update came I was to impatient to wait until it got the over the air update so I dowloaded it from XDA flashed it using flash tools. I've done the many times before tomy z2 and also to my previous phones and everything went fine. But this time after around 20% of the flashing was complete the completion bar just got stuck there forever. I waited an hour but nothing seemed to be happening so knowing well that it'll brick my phone I unplugged it from the PC. After some googling I found out that there was a new version of flashtools available so I unisntalled my previous version and installed the new one and flashed the same ftf file again. This time to my relief the flashing went normal and my phone was successpfully updated. After a few hours of use my phone just randomly restarted. I didn't pay any attention to it but in the following days my phone started restarting at the most random times around 3-4 times a day. So obviously I knew that something has gone wrong. So I used my booted my phone into safe mode but the problem presisted, I tried doing a hard reset and then I use SUS to repair it but the problem was still there.I even flashed the singtel version of the same firmware version but even then the phone just randomly rebooted. There's nothing wrong with the sim because I switched the sim too (because some people kept insisting that the sim is to blame although I knew in my case that it wasn't) but as I expected the problem presisted. Now I'm at a loss as to what to do.I bought the phone from singapore but right now I don't live there so I can't claim warranty (even if I could).
So I turn to you, the experts in XDA it would be great help if you guys can guid me to a solution or atlesat tell me what the hell is actually wrong with the phone.
Ps: the restarts are entirely random. eg: I can play asphault for hours or shoot 4K for a long time without any problems but then I try texting someone and the phone restarts.
Click to expand...
Click to collapse
Telephony error
Try repairing via sony pc compaion
If the problem persists contact sony customer support
Envious_Data said:
Telephony error
Try repairing via sony pc compaion
If the problem persists contact sony customer support
Click to expand...
Click to collapse
Thanks for the reply. I tried repairing via pc companion...did't work. What's a telephony error?
silver1704 said:
Thanks for the reply. I tried repairing via pc companion...did't work. What's a telephony error?
Click to expand...
Click to collapse
Telephony is actualy the phone part of a smart phone, its sim card slot to the app it self
Usualy when there is a problem with any one of those it will cause a phone to not function properly
In this case yours is one of them
Replacement or repair is needed ;D
Envious_Data said:
Telephony is actualy the phone part of a smart phone, its sim card slot to the app it self
Usualy when there is a problem with any one of those it will cause a phone to not function properly
In this case yours is one of them
Replacement or repair is needed ;D
Click to expand...
Click to collapse
I see. Unfortunately the country I live I'm in at the moment doesn't have a sony service centre or anything of the sort so I have to go back to Singapore to actually give it for repairs.
But how is it possible that I got a hardware damage just by a flashing error? I mean before that incident the phone worked just fine for 3 months and I've never dropped my phone or done anything to actually damage it physically.
silver1704 said:
I see. Unfortunately the country I live I'm in at the moment doesn't have a sony service centre or anything of the sort so I have to go back to Singapore to actually give it for repairs.
But how is it possible that I got a hardware damage just by a flashing error? I mean before that incident the phone worked just fine for 3 months and I've never dropped my phone or done anything to actually damage it physically.
Click to expand...
Click to collapse
Z2 suffered alot of manufacturing issues so it is posible a part on a well kept device can break, like my Z2 vibrator motor randomly stopped yet i never dropped it
I've got same problem..did you fixed it? Advice me plz..
Sent from my D6503 using XDA Free mobile app
my has phone automatically factory reset every thing even the SD card
how can I restore my SD card ?????

Pocophone f1 camera not working.

Hello!
So yesterday ive tried to take a picture on my phone and the camera wouldnt work. Screen is usually black and sometimes goes green also pops the error message saying that cannot connect to camera.
Ive tried doing a factory reset (couple times) didnt work.
Ive tried dialing * # * # 64663 # * # * and doing those tests, sometimes 1 back camera and 1 front camera would work but really incosistent.
Ive checked for updates (none avalible)
Ive tried downloading some others apps used for camera, doesnt work.
Phone is pretty new (maybe a month) and this is the first issue ive had so far, phone was never dropped or similar.
Thanks!
try to go to service center, it looks like hardware issue. they will not charge u money since it new.
Also i forgot, to make things clearer, ive seen a thread about this here already https://forum.xda-developers.com/poco-f1/help/pocophone-f1-camera-issue-green-black-t3848981 and the symptoms are the same.
Will go to the shop for a replacement or a fix in a week, untill then if someone has any ideas.. :]
aroa137 said:
Also i forgot, to make things clearer, ive seen a thread about this here already https://forum.xda-developers.com/poco-f1/help/pocophone-f1-camera-issue-green-black-t3848981 and the symptoms are the same.
Will go to the shop for a replacement or a fix in a week, untill then if someone has any ideas.. :]
Click to expand...
Click to collapse
have you tried to update to latest version? because in Indonesia when first launch, one or our reviewer having the same issue that fixed by firmware update the next day.
I have updated it to the latest version, there was even an update couple of days ago which completly changed the UI of the phone. Still not working. I havent tried updating firmware manually myself as i think it might void the warranty. Im going to go to the shop where i purchased the phone and give them a go to fix it, if not i might ask for a cash refund or a new phone, or try updating firmware myself, havent decided yet.
Sorry for the late reply
Have you got the fix?
I'm currently on pixel experience and I am experiencing the same issue since yesterday, and i can't find a fix, did you solved the issue and if yes, how?

Categories

Resources