Related
I managed to root my mini pro. However, I tried to debrand it and the phone stopped functioning. The touchscreen will not respond (thus, it is stuck on the "Select language" page. I've noticed that the 2 big files in the Sony Update Service that was supposed to replaced, disappeared. Leading me to conclude that those files are deleted from the mini pro.
However, PC companion, PC suite does not seem to be able to fix/recognize the phone. I've spent over 4hrs searching and attempting to fix this to no avail. Please help.
Long shot here mate, but worth a try..
Hold Home key and the power key from a cold restart. See if it resets to default again..
Good luck I feel your pain!
redemption0327 said:
I managed to root my mini pro. However, I tried to debrand it and the phone stopped functioning. The touchscreen will not respond (thus, it is stuck on the "Select language" page. I've noticed that the 2 big files in the Sony Update Service that was supposed to replaced, disappeared. Leading me to conclude that those files are deleted from the mini pro.
However, PC companion, PC suite does not seem to be able to fix/recognize the phone. I've spent over 4hrs searching and attempting to fix this to no avail. Please help.
Click to expand...
Click to collapse
Try with "Update Service":you can download it from sony website...
Update Service will help, I also rooted my X10mini, after that I removed some apps and after reboot the device was frozen on bootanimation with no respond. I was recomended to use Update Service and it worked. It "reinstalled" whole device SW.
I had the same problem et I tried to solve it with SEUS but this software told me that my version is the last one and dont want to repare or install another one one my mini..(I can't see any button "repare" !)
Anyone have an idea ?
sorry for my poor english
Thanks for your suggestions. However, I managed to fix it using the Davinciteam software.
Well I guess that your solution is not free so if somebody found anything whcih could be usefull to me or anybody who can fall on this problem please tell us
bigbrother69 said:
Well I guess that your solution is not free so if somebody found anything whcih could be usefull to me or anybody who can fall on this problem please tell us
Click to expand...
Click to collapse
Without phone connected:
Open PC-Companion and press Start under Support zone. Then press start under Update (My version is Swedish so i am just guessing what yours might be.) You will get a small box where the options are Connect and Repair.
Try that.
No, I have an error like "sorry, we cant update your phone cant be recognized"
I already tried with software like omnius, seus, pc compagnon, sin reconstruction, an utility of root by Mogway where there is an button to repare some errors. Davinci software doesn't support x10 in the free version.
I'll go on to find a solution, tks for your help
bigbrother69 said:
No, I have an error like "sorry, we cant update your phone cant be recognized"
I already tried with software like omnius, seus, pc compagnon, sin reconstruction, an utility of root by Mogway where there is an button to repare some errors. Davinci software doesn't support x10 in the free version.
I'll go on to find a solution, tks for your help
Click to expand...
Click to collapse
But IS there a repairbutton ? I am wondering because otherwise you might not have the latest version of PC-Companion or something? Also , when doing repair i don't think it even checks what your phone is. You have to select it from a menu that pops up.
Yes, there is a button and i tried all the software in there last version.
When I press the button "repair", I see that the program load "update prtocol" or something like that (update service ?), then It's start the update and 2sec after an error appear in a box "We can't access to mobile phone" or smthg like that.
Apparently, no communication can be done in PC compagnon.
My drivers are ok, seus apparently recognize my phone (if he told me that I have the last version and tell me that he see my phone)
A little weird huh
Under pc compagnon there is a repare button yes.
The error appear to the point "update motor boot" (démarrage du moteur de mise à jour in french)
I dont find solution yet
redemption0327 said:
I managed to root my mini pro. However, I tried to debrand it and the phone stopped functioning. The touchscreen will not respond (thus, it is stuck on the "Select language" page. I've noticed that the 2 big files in the Sony Update Service that was supposed to replaced, disappeared. Leading me to conclude that those files are deleted from the mini pro.
However, PC companion, PC suite does not seem to be able to fix/recognize the phone. I've spent over 4hrs searching and attempting to fix this to no avail. Please help.
Click to expand...
Click to collapse
redemption0327 said:
Thanks for your suggestions. However, I managed to fix it using the Davinciteam software.
Click to expand...
Click to collapse
I also have some problem like you.. Can you give the explanation and tools (Davinciteam software) to fix it.. 'Cause i hopeless to fix it until i read this.
Use the latest Omnius, it supports x10 mini and mini pro flashing
oh sh... I paid to fix it and now there is a free solution, the world is really nasty
Well, if anyone can't fix it with Omnius, I can give some advice for DaVinci, but I really hope that I'll be the last one to use this soft (despite his efficacity).
I hope you unterstood me
what do u use to convert your firmware to work with omnius??
I have the same problem, stuck on "Sony Ericsson" screen at startup. I tried SEUS and PC Companion to no avail. How can I get Omnius, i cant seem to download it anywhere.
bingobadgo said:
I have the same problem, stuck on "Sony Ericsson" screen at startup. I tried SEUS and PC Companion to no avail. How can I get Omnius, i cant seem to download it anywhere.
Click to expand...
Click to collapse
http://rapidshare.com/files/413633738/Omnius_for_SE_v0.09.2518.zip.html
Make sure you register and enter your registration details into the app.
parksy152 said:
what do u use to convert your firmware to work with omnius??
Click to expand...
Click to collapse
You dont need to convert them..
Just zip up the following files for the App.zip and make sure the naming convention is as below:
crashlog_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
amss_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota0_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota1_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
kernel_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
cache_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
And the same again for the following files for the FSP.zip:
amss_fs_robyn_BC18_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
userdata_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
system_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
update.xml
simlock.ta
Or alternatively download the firmware from Omnius website.
MarylandCookie said:
http://rapidshare.com/files/413633738/Omnius_for_SE_v0.09.2518.zip.html
Make sure you register and enter your registration details into the app.
You dont need to convert them..
Just zip up the following files for the App.zip and make sure the naming convention is as below:
crashlog_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
amss_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota0_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota1_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
kernel_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
cache_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
And the same again for the following files for the FSP.zip:
amss_fs_robyn_BC18_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
userdata_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
system_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
update.xml
simlock.ta
Or alternatively download the firmware from Omnius website.
Click to expand...
Click to collapse
On the Omnius site there are no flash files for the x10 mini pro U20i only the mini E10i. Do you know anywhere I can get the U20i generic uk software to flash my phone using omnius.
zodiac100 said:
On the Omnius site there are no flash files for the x10 mini pro U20i only the mini E10i. Do you know anywhere I can get the U20i generic uk software to flash my phone using omnius.
Click to expand...
Click to collapse
They do have them, you have to register for access to downloads and activate your account. I have just checked
Hello everybody!
At first, sorry for my bad english but I've got a really big problem!
After updating the latest stock rom over PC Companion, I wanted to get Root with X10root.apk...so far...after rooting the device I've got the "great" idea to download Market Enabler cause I couldn't see Root Explorer FREE inside the market...
after reboot the disaster...
many apps FC at startup :-(
wrong display resolution :-(
no chance to accept root permission, popup is not shown in cause of the wrong resolution...difficult to explain...
Can't reflash with PCC or SEUS..."no Software avialible for your device!"
Can't install xRecovery:
APK - Can't accept root...the resolution problem
ADB - system read only
What the hell?!?!?!
Any suggestions? My Girlfriend will kill me if she notice whats up with her X10
P.S. Superuser don't disappear after factory reset...is this normal??
In this case I've got no warranty...right???
Oh damn...my girl REALLY killing me...
Hello Jozinek, thanks for the quick reply...
do you mean this:
http://forum.xda-developers.com/showthread.php?p=10738467
X10 Flash tool??
I tried it serveral times with the "SE Flash Driver" installed...it alway says:
"Waiting for device" or "Waiting for Xperia"...something like that...
I clicked on the FLASH button...then connected the device with pressed hold button for recovery...Result: Waiting for Xperia...
Click in the flasher to flash until you see waiting for device (or something like that)
Turn the phone off hold the back button then quickly plug the usb cable in the mini and hold
Does it not flash close the flasher on your pc and try over again!
Sent from my U20i using XDA App
Or try it in another windows version.
Worked for me.
flash tool not working on xp but working on windows 7.
I've tried EVERYTHING!!!!!
deinstalled all drivers...reinstalled...etc...
Update with PCC, SEUS, X10 Flash Tool (my last hope)
Then I've tried it on my mates laptop with windows 7...no luck again...PCC,SEUS,Flash Tool...I was really desperate at this point!!!
Now I tried again, another mate, another computer...
First try with PCC...no problem...reflash...READY!!!
But...........WTF?????
Why PCC says "No update for your device" on 2 different PCs and finally works on the third one?? This could not be a driver problem!!
Now I'm very glad not need to hide from my girlfriend!
Glad to see that you revived your GFs phone
Just to inform you, x10 series is hard to brick.. I brick it countless of times and i just reflash it with Binary Flash tool.
Sometimes your windows and drivers can be a problem. For instance, when i bought my Mini it was on stocked android 1.6, when i tryed to update him i got message that there is no update for my phone. I googled a bit and visit SE site, and there it is, my FW was listed as a part of 2.1 update, but again, i was unable to update. I reinstalled my Win (from XP to Win7) and first thing that i do is to try to update my Mini.. And there it is! Update available!!
Anyway.. Mini cant be bricked, after everything that i did to him, so many reflashes and it works like a charm.
i, hi also bricked my GD phone after trying to debrand it.
i replace the build.prop file with this one E10i_build.prop_UK_Generic and then i rebooted.
since this time, the only thing that appears on my screen is sony ericsson, then it reboots.....
what can i do to make it work again?
thanks for your help.
finally i managed to make it work again.
i m relieved
I don't know about PC Companion, I prefer the SE Update Service (SEUS).
Even tought there are no newer Firmware, it's always possible to reinstall/repair with the same firmware as the phone already have.
Used SEUS for that several times trying to revive a M1i Aspen. Luckily the X10 Mini is a little harder to brick
i guess you're german? then try this
h t t p ://w w w.android-hilfe.de/root-hacking-modding-fuer-xperia-x10-mini-mini-pro/53698-x10-mini-e10i-mini-pro-u20i-german-2-1-incl-flashtool.html
müsste auf jedenfall funktionieren =)
wenn du hilfe brauchst, sag bescheid
ftf verses rar?
My x10 mini pro is also bricked. It just looping when rebooting. I trying to use flashtool to fix it, but I am stuck.
Downloaded the U20i 2.1 firmware.But, this is a rar file. The flashtool wants a ftf file. How do I manage this problem?
/x10mp
x10mp said:
My x10 mini pro is also bricked. It just looping when rebooting. I trying to use flashtool to fix it, but I am stuck.
Downloaded the U20i 2.1 firmware.But, this is a rar file. The flashtool wants a ftf file. How do I manage this problem?
/x10mp
Click to expand...
Click to collapse
a rar file is just a compressed file (like a .zip)
if your on windows, download 7zip or WinRar and try extracting the rar file.. (you might find the files that you need are in there) flashtool requires a bunch of .sin files should be 8 or 9 of them... loader.sin, system.sin etc
stick these in the firmware folder of flashtool and you should be good to go.
(I was the first person to test "Flashtool" for Bin4ry on the X10mini last year and I have never had a problem with it)
Kiwi
interesting story Lol .. thank god u got her phone fixed .. =P ..
Hello ! I have a Xperia X10 Mini Pro and I have flashed my telephone with a custom rom 2.3. It has freeze in SMS application and I have reboot the smartphone, since it does not restart. I have flash the telephone with Flashtool and SEUS with rom 2.1 but does not work. Help me please,
PS : Sorry for my bad English, I'm French.
EDIT : It reboot in a loop.
I would try removing the battery for a minute or two, remove and format the sd card (backup any data you want to save) get SEUS up and running on the PC and then connect the phone. Select the option to repair and wait.
(Sent from u20i using D4rKnYsSys/Slade87 Cyanocomb + tapatalk)
I have already try this method but this not work
EDIT : It would not be a hardware problem?
I have downloaded the official firmware and flashed it myself using x10FlashTool.
later then I updated the firmware with SEUS.
Hopefully it'll work the same for you.
Best regards,
Ron
I did that but it does not work :'(
did you try PC Companion? it work for me
Not work for me.
Help me please
SEUS will work
Updated firmware with SEUS dont click on repair, Just click on installed.
If it say that your phone has already updated ignore that & click on "install" & follow procedure.
Hope it work It work on mine.....
Does not work for me :'(
ayme.32 said:
Does not work for me :'(
Click to expand...
Click to collapse
check this thread
http://forum.xda-developers.com/showthread.php?t=1187033
wOrHeR SvK had the problem and yesterday he got his phone working
I had this problem a loooong time ago too.
Lucky for me my wife got the same mini pro and had not yet updatet the original stock ROM in any way.
I connected her mini pro to SEUS. Got the update-notification, followed to the part where you remove the USB-cable, turn off and then reattach the USB-cable while holding the back-key (only here i attached my bricked mini pro).
Guess the rest...
Bad news for your phone.
I think your phone is fully bricked and I think there's no chance to recover it.
honam1021 said:
I think your phone is fully bricked and I think there's no chance to recover it.
Click to expand...
Click to collapse
its not fully bricked
its maybe having driver problem on his pc
Look u deffo got the drivers for your phone and are u using seus properly because seus will always fix bricked phone unless manafacuring prob and 12 month warenty because they cant turn it on so they cant no had root
Seus or return
My Mini Pro flash very well without any errors but it does not restart.
This can be boot patrition problem, go to service or try Davinci team's flash tool(10euro ).
Sent from my SE X10 Mini [email protected] v1.4 by D4 using Taptalk Premium
What is service and davinci flash tool ?
Check this:
http://www1.davinciteam.com/
Service is place where your phone get repaired( I don't know any other english word to say this...)
Does it work ?
Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
pabling19 said:
Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
Click to expand...
Click to collapse
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
Looks like a hard brick in my opinion if you flashed the wrong phone's firmware I suggest you send the phone back to SE for repair.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
faiyyaz;17405774[QUOTE said:
]You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
Click to expand...
Click to collapse
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
try to unplug your batterie, wait ... plug the batterie, start into recovery ( clockmod ) and reflash with a new rom .
If your bootloader is lock, you cant brick your phone
How to rescue our bricked phone for x8 http://forum.xda-developers.com/showthread.php?t=1011071
PS: Are you sure you have the good firmware ?
In the post of doixant ( x8 ), you can see : Latest kernel and latest baseband xxx015
Another exemple : MiniCM7 for X10 mini ( not pro ) : Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015 due to kernel dependencies. This is automatically tested during the installation.
I guess, it's same for all custom rom
Sorry for my bad English
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I ve never press Home+Back , only back.
Sorry for double post
Edit :
pabling19 said:
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
Click to expand...
Click to collapse
Do you have already use Flashtool ?
If your are under Vista or Win 7, you must disable the UAC ( User Account Control ) for flashtool works. Search in google, I m french and i've found lots of pages, but in french.
Sorry if is useless, and for my bad English
pabling19 said:
faiyyaz;17405774
Hi said:
How is that the flash tool isnt workin?? Are u followin the steps properly..??
Well follow the 1st two instruction's here for flashtool of steps for installinng any ROM..
http://forum.xda-developers.com/showthread.php?p=16412835
Download flashtool n stock files.. See if it works.. N if on vista see wat spliff said..
Gintonic.SE by slade..
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I don 't know if you must put your phone into debugg USB for flashtool works. Try
@OP
I'm sorry, but I really think your phone IS a hard brick now . I remember reading about a user that flashed a Galaxy S firmware onto his Galaxy S2, in the end he had to send his phone to the repair shop.
The same is probably true of your phone. I think you had better send it to the repair shop .
Hey Guys,
I've broken my Xperia X10 Mini...
I tried to flash it using Flash Tool and firmare E10i_2.1.1.A.0.6_Sony Ericsson.ftf (I read that it work to E10a to )
And everting looks good, but after the process he can Turn On!!
When I push the power button, my cellphone vibrate, but don't appear anithing...
I tried to reinstall using SEUS but he says that there's no longer update avaible and don't show me any option to "install anyway"
Can anybody help me??
Try to find a way to unplug the battery.
I don´t know what the Xperia looks like inside but on the Mini there is a small rubber thing behind the cover that exposes the battery connection.
Have you tried hard reset?
And then SEUS?
Yeah, I tried to reinstall by SEUS...
I have shutdown the Battery and nothing...
Is that Hard Reset is made by Hardware???
I can't find anything about that...
repair phone
i was with the same problem: forum.xda-developers.com/showthread.php?p=18018410#post18018410 <<<take a look there
try doing this, works for me
download Sony Ericsson PC Companion 2.0, open it, and click in support zone, then upgrade phone(i don't know what is written but in portuguese it is ''atualizar telefone'') next click repair phone(i don't know this one too, but in portuguese is ''reparar o telefone'')and then just follow the instructions in the screen
sorry for my bad english
Next time post in general and q&a for help.
Sent from my X10mini using XDA App
brenorc97 said:
i was with the same problem: forum.xda-developers.com/showthread.php?p=18018410#post18018410 <<<take a look there
try doing this, works for me
download Sony Ericsson PC Companion 2.0, open it, and click in support zone, then upgrade phone(i don't know what is written but in portuguese it is ''atualizar telefone'') next click repair phone(i don't know this one too, but in portuguese is ''reparar o telefone'')and then just follow the instructions in the screen
sorry for my bad english
Click to expand...
Click to collapse
I tried this steps but it doesn't work!!
The SEUS says me that "It allready updated" and don't show me any option to reinstall the software...
And the PC Companion 2.0, in the repair screen, after update his database, is returns me a error: "PC Companion Error: Can not install or start the components of phone update"
Sorry my poor English and my slowly to respond... I was without connection!
reinstall the seus delete se update engine re-download done
Hey Guys,
Thanks... I recovered my X10 mini with an Generic Rom and Flash Tool!!!
But Thanks all for your help!!
See ya!
hay how did u solve it bro???
im actually facing 100% similar problem after flashing 2.1.1.a.0.6 rom.....and nothing appears after.... so what generic rom u used? and please write the steps for me..... i tried installing "Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf" but it gives error while flashing on start...process aborted... because i think the previous rom (2.1.1.a.0.6) was successfully installed... in the end it says to turn on phone and turn on option of debugging but the phone u know wont turn on...!! please help with ur experience
rang6300 said:
im actually facing 100% similar problem after flashing 2.1.1.a.0.6 rom.....and nothing appears after.... so what generic rom u used? and please write the steps for me..... i tried installing "Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf" but it gives error while flashing on start...process aborted... because i think the previous rom (2.1.1.a.0.6) was successfully installed... in the end it says to turn on phone and turn on option of debugging but the phone u know wont turn on...!! please help with ur experience
Click to expand...
Click to collapse
SEUS did not work?