Hi!
I was just wondering if anyone could tell me what the best setCPU settings for HD2, with respect to battery life and stability(no lag), are?
I've been searching for the answer on many forums but haven't been able to find a definite answer.
Thanks for your thoughts and recommendations!
Personally, I don't see the need for setCPU. I get no more than 7mA drainage per minute when in standby and my phone is already as fast as I'll ever need it to be. Am I missing something? I can easily get 30+ hours out of my phone with moderate to heavy usage.
Oh, I've had these same battery results on Shubcraft, SuperHD2, Hyperdroid, Bangsters, and the new Desire HD ROM.
Chuckydroid ROM
2.12 Radio
Stock 16gb microsd
Max to 245
Min to 245
That will guarantee long battery life
You really should search tho
Sent from my HTC HD2 using Tapatalk
setCPU Settings
~~~~CREDIT GOES TO BANGSTERS~~~~
on main screen:
max 1190
min 245
governor = interactive (better than ondemand)
profiles:
Enable it
Add profile:
Screen Off
Max 245
Min 245
Priority 100%
interactive as well
Add profile:
Battery <40%
Max 768
Min 245
Priority 80%
interactive as well
Add another profile:
Advance Tab
Min Sampling Rate = 50000
Enable it
Remember aside form this set spare parts windows animation and transition animations to FAST
And in ADW launcher, set the following:
screen preferences -> desktop scrolling speed around 50 - 100
drawer settings -> zoom effect speed 325
drawer settings -> fade app labels unchecked
system prefernces -> scrolling cache auto
Hope this helps.
I agree with alpinestars
i think ondemand is bit buggy the kernel dont choose the right Scall
sometime its choose 1000mhz with 20% cpu used that is wasting
my setting in adv
Up Threshold 55
down "" 50
freq step 20%
screen off
245-384 interactive
battery 1.5%ph [4 hours test]
its might be laggy a bit from idling to full using like watching movie
but its should stop after 100ms berrly noticeable
Question
Ok BIGGGG newbie question i know but i got to ask this lol, what do you mean by governor=interactive? I mean i know how to use setCPU been using it for a while now but...i don't seam to have that scaling.
I'm using setCPU 2.0.3 full version.
is there a kernel with higher max clockrate than 1190 ??
Ahmun_Ra said:
Ok BIGGGG newbie question i know but i got to ask this lol, what do you mean by governor=interactive? I mean i know how to use setCPU been using it for a while now but...i don't seam to have that scaling.
I'm using setCPU 2.0.3 full version.
Click to expand...
Click to collapse
It depends if its activated in the kernel you are using.
Sent from my HTC HD2 using XDA App
souljaboy said:
is there a kernel with higher max clockrate than 1190 ??
Click to expand...
Click to collapse
That i know No there is not, its the higher safe clockrate of the HD2. Higher is trying to make your phone a fryed egg lololol
I dont see Interactive on my SetCPU, I see:
Conservative
Ondemand
PowerSave
Userspace
Performance
Do I have a different version?
SetCPU 2.0.3
gattaca714 said:
I dont see Interactive on my SetCPU, I see:
Conservative
Ondemand
PowerSave
Userspace
Performance
Do I have a different version?
SetCPU 2.0.3
Click to expand...
Click to collapse
What kernel and Android are you running? Some Android build has interactive while others don't.
Ahmun_Ra said:
That i know No there is not, its the higher safe clockrate of the HD2. Higher is trying to make your phone a fryed egg lololol
Click to expand...
Click to collapse
making a fryed egg out of this crap would be the best thing i do
I have an easier solution.
Just send it to me and I'll send you a fried egg --postage paid.
jamesbryant said:
I have an easier solution.
Just send it to me and I'll send you a fried egg --postage paid.
Click to expand...
Click to collapse
+1
I could have a better use for it, I am not into eggs anyway.
Ahmun_Ra said:
That i know No there is not, its the higher safe clockrate of the HD2. Higher is trying to make your phone a fryed egg lololol
Click to expand...
Click to collapse
Seen pics of a Milestone @1400
now thats crazy as they begin with a 600Mhz
I found that 245max 245 min setting in screen off is not a good setting
i use 576 max/min in screen off makes a result that only 1% drop in 75 min
i test it last night when i sleep hehe (average 3-7 ma)
Try these settings I posted in the thread "If you're using setcpu, try these profiles."
Tomorrow I am going to test a set up I just made. It should be called the Step Setup.
The purpose of this setup is to trying to keep the phone running smooth while being proportional and saving battery. This is my first attempt so I will be tweaking it as I test it and receive input.
Keeping the same priority settings as I have listed is crucial because if the order is out of place it will not downclock at the right time.
Here are the settings:
Main - Max:1036 Min:245 Scaling:Interactive (set on boot checked)
Profiles
Screen off - Max:245 Min:245 Scaling:Interactive Priority:100
Battery<10 - Max:384 Min:245 Scaling: Interactive Priority 75
Battery<15 - Max:422 Min:245 Scaling:Interactive Priority 70
Battery<20 - Max:499 Min:245 Scaling:Interactive Priority 65
Battery<30 - Max:576 Min:245 Scaling:Interactive Priority 55
Battery<40 - Max:614 Min:245 Scaling:Interactive Priority 45
Battery<50 - Max:652 Min:245 Scaling:Interactive Priority 35
Battery<75 - Max:768 Min:245 Scaling:Interactive Priority 10
Battery<85 - Max:883 Min:245 Scaling:Interactive Priority 0
Advanced - Min Sample Rate:20000
This should be speedy and give great battery life. If your kernel doesn't allow Interactive scaling try setting everything to On Demand and in the advanced tab set the Up Threshold to 30.
EDIT: Using this with a combination of the VBN Android Rom has achieved some insane battery life. Yesterday I listened to music for a majority of the day, on and off, using the internet a few times and texting and when I went to bed the battery was around 30%, and that was around 12 hours of having my phone on me. My battery is old and has been charged a lot, a new battery or extended battery would provide crazy results.
Click to expand...
Click to collapse
2.14 Radio, Mdeejay Evo Sense
alpinestars said:
~~~~CREDIT GOES TO BANGSTERS~~~~
on main screen:
max 1190
min 245
governor = interactive (better than ondemand)
profiles:
Enable it
Add profile:
Screen Off
Max 245
Min 245
Priority 100%
interactive as well
Add profile:
Battery <40%
Max 768
Min 245
Priority 80%
interactive as well
Add another profile:
Advance Tab
Min Sampling Rate = 50000
Enable it
Remember aside form this set spare parts windows animation and transition animations to FAST
And in ADW launcher, set the following:
screen preferences -> desktop scrolling speed around 50 - 100
drawer settings -> zoom effect speed 325
drawer settings -> fade app labels unchecked
system prefernces -> scrolling cache auto
Hope this helps.
Click to expand...
Click to collapse
Hey thanksz but i dont think u can set your advanced settings without the main profile being on governer=ondemand.
alpinestars said:
~~~~CREDIT GOES TO BANGSTERS~~~~
on main screen:
max 1190
min 245
governor = interactive (better than ondemand)
profiles:
Enable it
Add profile:
Screen Off
Max 245
Min 245
Priority 100%
interactive as well
Add profile:
Battery <40%
Max 768
Min 245
Priority 80%
interactive as well
Add another profile:
Advance Tab
Min Sampling Rate = 50000
Enable it
Remember aside form this set spare parts windows animation and transition animations to FAST
And in ADW launcher, set the following:
screen preferences -> desktop scrolling speed around 50 - 100
drawer settings -> zoom effect speed 325
drawer settings -> fade app labels unchecked
system prefernces -> scrolling cache auto
Hope this helps.
Click to expand...
Click to collapse
i tried pm'ing you but you need to change your pm setting to recieve message
Changed pm settings
Related
Could anyone please tell me the settings and profiles that will give my x10 mini the best battery save? thanks
actually there is already a preset for that ..the "powersave" one..
Easy, just put both bars in 122880MHz..
Your phone are going to be rrrrreeeaaaallllyyy slow, but you save lots of milliamps
Use ondemand only. And set min to 122 and max to 600.
I use a profile when screen is off that set min to 128 and max to 320, ondemand too.
Step 1: Once the app has downloaded from the market open it.
Step 2: Hit auto recommend speeds on the first boot up of the app.
Step 3: Click the profile tab at the top.
Step 4: Hit Add Profile.
Step 5: The profile button selects what happens for the CPU to under clock or over clock. The max is the max the CPU will reach; the min is the minimum the CPU will reach.
Step 6: Profile: Screen off. Max: set to minimum. Min: set to minimum. Scaling: set to Conservative. Priority: set to 100. Press okay, and hit Enable.
Thanks to Ultralinks
Has anyone had problems with random freezes and reboots with SetCPU installed? I've had a couple random reboots, so for now I've uninstalled SetCPU to see if the problem goes away. I also have Advanced Task Killer installed but it wasn't set to kill tasks automatically.
raiderkilo said:
Step 1: Once the app has downloaded from the market open it.
Step 2: Hit auto recommend speeds on the first boot up of the app.
Step 3: Click the profile tab at the top.
Step 4: Hit Add Profile.
Step 5: The profile button selects what happens for the CPU to under clock or over clock. The max is the max the CPU will reach; the min is the minimum the CPU will reach.
Step 6: Profile: Screen off. Max: set to minimum. Min: set to minimum. Scaling: set to Conservative. Priority: set to 100. Press okay, and hit Enable.
Thanks to Ultralinks
Click to expand...
Click to collapse
Setting SetCPU like that is not very smart. For example, You have Your screen off, someone is calling You, what happens? You get the call ringer after few seconds (sometimes even 10-15!). Reminds of old Symbian versions? But just this. Next example - You have Your screen off, and You receive sms. What happens if You are using Handcent, and have to go to the app manually after phone wakes up? It takes ages... But if You have more than 1000 massages in Your inbox, and a new one come, and You get it after screen wakes up it can even lead to a reboot.
Lets add some random weird situations if You are listening to Your player while the screen is off... using some third party apps, etc...
Setting the minimum CPU for the screen off is not a good idea. Don't do that, or the phone will fail You in most unwanted cases.
so what are you guys using?
I am 122-600 on normal ondemand
and screen off on 122-256 ondemand
Anyone with better profiles?
just dont overclock!!!
why not? I see you are running 729/600.
WHY is your min 600?
Use smartass governor - auto profile, just upgrade to gingerbread.. best profile yet..
Set normal use 122Mhz-729Mhz 100% Priority
Set for charging: 122Mhz-245Mhz (or similar) - 100% Priority
Set for screen off 122-245 (or similar) - 100% Priority
^ this saved me battery when I used my phone for so much else besides calling and texting.
for good batter backup....set the minimum as 122Mhz and the max as 480 Mhz....anything above 748 and below 480 will get u into "restart & restore"...however, there is a overclock module allowing you to overclock to 825 Mhz (but dats juss fr "testin"...u'll lose battery like a freak and will get awfully hot readings)
achyut said:
for good batter backup....set the minimum as 122Mhz and the max as 480 Mhz....anything above 748 and below 480 will get u into "restart & restore"...however, there is a overclock module allowing you to overclock to 825 Mhz (but dats juss fr "testin"...u'll lose battery like a freak and will get awfully hot readings)
Click to expand...
Click to collapse
Only a handful devices supports being clocked to 825Mhz but it's very dangerous.
I doubt you can raise the clock speed to 825Mhz without the phone freezing up.
ruifung said:
I doubt you can raise the clock speed to 825Mhz without the phone freezing up.
Click to expand...
Click to collapse
Some have succeeded, but I doubt their phones lasted very long after that.
Just wondering, is the phones processor under the right side of the keyboard? cause after a few minutes @ 710Mhz, that area is hot. Since I switched to the smartass governor, it rarely is hot anymore (due to the fact it mostly spends time @ 245/320Mhz
Um... question?
Shouldn't the phone go into deep sleep when the screen is off with no cpu activity?
Also install cpu spy and see what the cpu is doing for how long.
https://market.android.com/details?id=com.bvalosek.cpuspy
1. The cpu does not make the most heat... it's the 3G radio.
2. Cpu should deep sleep automatically.
My OC prifile for mini pro:
Standard profile- 122 - 825mhz
If Battery < 15% then 122 - 600 "this gets rid of crashes due to low power OC"
Also.. i asked some of the developers that made the modules for overclocking and undervolting.
It's undervolting there is no upward voltage bump so it can't really nuke a cpu.
But you can nuke the power circuits if you use heavy internet on 3G and charge at the same time.
How can I put over 600 Mhz?
My SetCPU makes 600 Mhz the max. I want to put just on 700, but I can't. What is the problem?
@Felimenta97:
You don't have any overclock-enabler module installed/insmodded or if using any CM-based ROM, the corresponding setting is disabled.
I'm using smartass with 122-320 for screen off and ondemand with 320-729 for normal, no problems so far
The max MHz I could get was 729MHz, 748MHz worked but after some time the CPU got 'pegged' as said in the logcat
Tried the 825MHz setting that only caused a freeze and boot loop, forcing me to do some fast adb commands to get rid of the overclock
I have a Samsung Galaxy Gio and when I turn on the display again to send a text message to my girlfriend everything feels very slow etc... Then after 3-4 seconds everything feels very snappy and stuff...
I have no special profiles set with setcpu...
Does anyone know what I can do?
Should I change the memory management settings? Or is the problem that the phone needs to jump from 128mhz to 800mhz. Maybe my phone responds slow because of the slow sampler speed?
Do you have setcpu to throttle down your cpu when the screen turns off?
You could try setting your scaling to "Performance".
---------- Post added at 03:05 PM ---------- Previous post was at 03:05 PM ----------
otnos said:
Do you have setcpu to throttle down your cpu when the screen turns off?
Click to expand...
Click to collapse
He did say that he doesn't have any special profiles set.
I tried this:
ondemand 148 - 800 = LAG[/B]
- throttleUp = 80
- powersavebias = 0
- ignore nice load = 0
performance 800 = ok
conservative 148 - 800 = ok
- throttleUp = 80
- throttleDown = 20
- Sampling rate = 200000us
- Ignore nice load = 0
So far conservative might be my best best... But the issue is that the stock firmware uses 248-800 ondemand by default... I have the lag on that setting as well... I am now testing conservative. I hope I am doing a good thing changing the governor.
djjonastybe said:
So far conservative might be my best best... But the issue is that the stock firmware uses 248-800 ondemand by default... I have the lag on that setting as well... I am now testing conservative. I hope I am doing a good thing changing the governor.
Click to expand...
Click to collapse
You have more lag on "on demand" because the system has to do a check everytime for the frequency. On "performance" the cpu stays at the max (which you allow) eliminating those checks and using time more wisely. Also, keeping it on "performance" also uses less battery life (in a way) compared to "on demand". Conservative will keep the cpu at its lowest, causing far greater lag. So your best bet, would be "performance".
can anyone suggest me what are the profiles u ve kept for good battery backup?
i ve rooted my venue to cm7 based on threads in our xda and facing reduced battery backup now!
i need wat all the profiles and their cpu frequency u ve set in for good performance pls
Try conservative or ondemand and tell...i'm using performance setting and getting 1day battery backup...it also depends on usage as well...internet on will drain battery as well...i got 3 days bacup with my phone with internet off and on performance setting...
Sent from my Dell Venue
terminal17 said:
Try conservative or ondemand and tell...i'm using performance setting and getting 1day battery backup...it also depends on usage as well...internet on will drain battery as well...i got 3 days bacup with my phone with internet off and on performance setting...
Sent from my Dell Venue
Click to expand...
Click to collapse
thank you!
there s option for setting maximum and minimum frequencies rite?is there any setting we ve to do in tat ?
Upto u...any speed u can set it at...
Sent from my Dell Venue
I used DV with a lot of widget but turn-off data transfer. I used DV in 2day no need change battery
My setting
terminal17 said:
Upto u...any speed u can set it at...
Sent from my Dell Venue
Click to expand...
Click to collapse
i ve kept the following setting!
pls try this and tell me if there are any changes to make so i can improve my DV performance !
Profile: Screen off
Priority : 50
Scaling : On Demand
MAX :245760
MIN :245760
Profile: Battery :<30
Priority : 100
Scaling : On Demand
MAX :245760
MIN :245760
Profile: Charging and In Call :
Priority : 50
Scaling : On Demand
MAX :998400
MIN :245760
Rameshkrish said:
i ve kept the following setting!
pls try this and tell me if there are any changes to make so i can improve my DV performance !
Profile: Screen off
Priority : 50
Scaling : On Demand
MAX :245760
MIN :245760
Profile: Battery :<30
Priority : 100
Scaling : On Demand
MAX :245760
MIN :245760
Profile: Charging and In Call :
Priority : 50
Scaling : On Demand
MAX :998400
MIN :245760
Click to expand...
Click to collapse
Best ways:
Go in Settings > Cynogenmod Settings > Performance > CPU > Select "On Demand" there.
I used this goes 1.5 days on 2G EDGE network
prasad12ka4 said:
Best ways:
Go in Settings > Cynogenmod Settings > Performance > CPU > Select "On Demand" there.
I used this goes 1.5 days on 2G EDGE network
Click to expand...
Click to collapse
i also use 2g when im at work! also i ve set this after reading some threads online:
settings> cyanogenmod settings> interface > render effect> and choose a mono colour
when im at work and dun use phone that time! nw it gives good backup!
thank you!
Turn off some services no need, and clear cache some apps!
Hi all,
I couldn't find the relevant information anywhere else, so thought I should ask if someone has experienced this.
Well I'm using setcpu on my razr and it is quite a brilliant app to be honest, helps me save battery quite alot by setting up profiles.
But recently I've been having crashing problems with the phone whenever i set the scaling to hotplug.
Previously, i was just using the default scaling, I guess Interactive it was, and was working quite happily. And, then i read about advantages of using Hotplug scaling, that it enables/disables cores depending on the amount of load on the cpu, which is really good for saving battery.
And before how I was using the phone, was to set a profile for screen off to drop the cpu down to 300MHz, using the default scaling.
But as soon as I changed from default scaling to Hotplug, it starts crashing randomly, and I've to restart the phone using keys.
Scenarios tried:
- Main scaling: Hotplug -- Screen off scaling: Interactive, Ondemand, Performance, Hotplug -- Processor Max: 300MHz
Result: crashing as soon as u turn the screen on, or sometimes while the screen is off.
- Main scaling: Hotplug -- Screen off scaling: Interactive, Ondemand, Performance, Hotplug -- Processor Max: 600MHz
Result: crashing as soon as u turn the screen on, or sometimes while the screen is off.
- Main scaling: Interactive -- Screen off scaling: Hotplug -- Processor Max: 300MHz
Result: In process of checking, hasn't crashed yet for more than an hour. :fingers-crossed:
Can someone kindly point out the obvious mistake I'm making here?
I really want to use hotplug, both as main and screen off.
FYI: I haven't done anything else to the phone apart from gaining root access.
i had issues with setcpu, i recommend no frills cpu control, and setting it down that low more then likely is also an issue, the second core i couldn't see turning off at a low clock and also i think it would max out easily causing instability (especially ICS) and above id say. uninstall setcpu give no frills a try and let me know would be glad to help with what i can!
Thanks for ur reply, yes I'll try no frills, but
mr4r4n said:
setting it down that low more then likely is also an issue
Click to expand...
Click to collapse
I thought the same, but while i was using interactive scaling, it worked perfectly, no issues at all. Probably because both cores were active by default, so both on 300MHz when screen was off.
mr4r4n said:
the second core i couldn't see turning off at a low clock and also i think it would max out easily causing instability (especially ICS)
Click to expand...
Click to collapse
No, I've checked cpu usage visa adb shell, and if the screen off is in hotplug, like what it is right now, the phone stays at 300MHz with the second core turned off, most of the time. And the phone has been running now for more than 3hrs with screen off profile set to Scaling: hotplug -- Max: 300MHz, and the main scaling set to Interactive.
The problem I've seen is, when main scaling is set to hotplug. Doesn't matter whatever u set in screen off profile, it crashes if the main scaling is set to hotplug. But, if no screen off profile is set then, hotplug in main works flawlessly.
That's weird. I've been using SetCPU for a year or so on my RAZR GB/ICS and never encountered any crashes with hotplug or the default ICS's interactive.
I have even tried unofficial governers like smartass2, boostedassv2 and etc, no crashes.
I personally set my phone to use u/c 200-200 for screen off and I find it really saves a lot of battery, and even o/c to 200-1300 when it's on.
Are you using the setcpu from xda or from playstore? I'm using the one from playstore with Razr asia ICS.
Nikorasu said:
That's weird. I've been using SetCPU for a year or so on my RAZR GB/ICS and never encountered any crashes with hotplug or the default ICS's interactive.
I have even tried unofficial governers like smartass2, boostedassv2 and etc, no crashes.
I personally set my phone to use u/c 200-200 for screen off and I find it really saves a lot of battery, and even o/c to 200-1300 when it's on.
Are you using the setcpu from xda or from playstore? I'm using the one from playstore with Razr asia ICS.
Click to expand...
Click to collapse
I think I downloaded it from here.
But I think, they both are the same, from same developer
hsyasin said:
I think I downloaded it from here.
But I think, they both are the same, from same developer
Click to expand...
Click to collapse
This means that you're using an old July 2011 version.
Do make use of playstore's 15 min return policy to test the newer ver. Maybe it will solve your problem.
**** Update 25/1/2015 Add No Aggresive 2.0 Mod
By FirstMn
This "mod" help can you with CPU Overheating in Sony Xperia M4 Aqua, but remember!
1) You are installing it, and its your choose. That mean you bear full reposinbility for your machine. I dont have any duty or reposinbility to your device.
2) If phone, or parts of phone (sd Card, SIM, CPU,..) will break, read 1)
3) My work you can share, copy, edit, link. But if you write me as default creator, it will be good.
What is best? For gaming it is Performancefriendly.
For lower heating it is MinimumOverheating.
Other mods are things like experiments..
----
---- TESTED ON
Tested on my Sony Xperia M4 Aqua , 8GB , Mono SIM , E2303 model.
Firmware - 26.1.A.2.167
Android version 5.0
Unlocked bootloader
Rooted
Fast discharge app, in 100%CPU load GPS receivers on, Network connection and Camera light(LED Flash) on. Maximum load !
----
----
----
---- REQUIREMENTS
- Sony XPERIA M4 Aqua
- Root
- Maybe File explorer, what can access to /system folder (Root Browser)
----
----
----
---- INSTALL
Select mode what you want, (Original, Performance Friendly or Minimum Overheating) and copy files in this folder to /system/etc. Then reboot phone to apply changes.
Ex.: I like Minimum Overheating.
Go to folder MinimumOverheating and copy file
thermal-engine-msm8936.conf
and file
thermal-engine-msm8939.conf
to /system/etc.
----
----
---- Types of mods
----
1) 26.1.A.2.167_Original (MOST STABLE)
In short: Original settings from Sony
Original CPU managing from system. Useful if you won't backup original files or not like these mods.
CPU temperature range -> CPU clock:
Original:
.SMALL cores (up to 1.1 GHz)
65 - 70*C -> 1136 MHz
72 - 77*C -> 800 MHz
75 - 80*C -> 800 MHz
79 - 83*C -> 499 MHz
85 - 95*C -> 200 MHz
.BIG cores (up to 1.5 GHz)
60 - 70*C -> 1136 MHz
72 - 77*C -> 960 MHz
76 - 81*C -> 800 MHz
79 - 84*C -> 533 MHz
85 - 95*C -> 400 MHz
GPU temperature range -> GPU clock:
Original:
55 - 60*C -> 400 MHz
70 - 75*C -> 220 MHz
#Original ranges and clocks is written in all your files. It is not easyiest way to open these two files in your /system/etc
---
---
2) Performance friendly (STABLE)
In short: High performance stay for longer time, but phone gets hot.
Max. CPU temperature is 90*C, more is starting to clock down, when 93*C, it will clock to 400 and 200 MHz(Minimum CPU clock)
For me, it never go over 90*C.
In original i had max. 80*C, this allow +10*C. No.t too much, but i dont want burn my CPU, but if you want, you can set it to more than 90*C, it is your phone ...
GPU temperature is 80*C max. , when 82*C, it will drop to 200 MHz clock,
Original was max. 75*C.( I dont want experiment.. )
CPU temperature range -> CPU clock:
Lower than 90*C -> 1453 MHz
90 - 90,5*C -> 200 MHz (6 Cores)
91 - 91,5*C -> 1133 MHz
92 - 92,5*C -> 800 MHz
93 - 93,5*C -> 533 MHz
94 - 95*C -> 400 MHz
Core shutdowning changed only in 1.st stage, other are original
GPU temperature range -> GPU clock:
Lower than 80*C -> 550 MHz
80 - 81*C -> 400 MHz
81,5 - 82*C -> 220 MHz
---
---
3) Minimum overheating (STABLE)
In short: Lower overheating, but still good performace
This you select if you dont like phone to be hot.
Phone can't go over 70/71*C, that is 10*C under default.The phone is warm, but not hot, it only heating (for me).Here is another system than high performance, when goes "hot" (65*C), system set CPU clock to lowest what can, and every one stage it shuts one CPU core (in last is turned on only one). Dont panic, CPU stay long time middle 65-68*C.
CPU temperature -> CPU clock:
Lower than 65*C -> 1459 MHz (8 Cores)
65 - 67*C -> 200 MHz (8 Cores)
68 - 70*C -> 200 MHz (6 Cores)
71 - 73*C -> 200 MHz (4 Cores)
74 - 77*C -> 200 MHz (2 Cores)
80 - 81*C -> 200 MHz (1 Core)
GPU temperature -> GPU clock:
Lower than 55*C -> 550 MHz
55 - 60*C -> 400 MHz
60 - 62*C -> 220 MHz
---
---
4) No aggresive (DANGEROUS!!!)
In short: Minimum limiting CPU temp.. Phone hot but fast. But dangerous !!!!!!!!!!!
I set limit to 120*C, but i mean its have in build protection for prevent damage and its lowering temperature in 100-110*C. But i warning you is dangerous !!!!!!. When goes too hot, phone will automatically fast shutdown ! (Fast shutdown = Same if you use power button in microsd slot)
CPU temperature -> CPU clock:
Lower than 100-110*C -> 1459 MHz
Higher than 100-110*C -> Auto by system default
110 - 115 *C -> 220 MHz (1 Core)
Higher than 115-120*C -> Shutdown device
GPU temperature -> GPU clock:
Lower than 89*C -> 550 MHz
Higher than 90*C -> 220 MHz
No Aggresive 2.0 (STABLE)
In short: If you need maximum perfomance, you will have ! But if you dont want, you will cold.
Fixing this problems with first No Aggresive:
1) Warm-Hot in normal situations:
Not warm-hot phone in normal situations now - when browsing web, switching between apps, messenger, facebook, and other. Phone was heated, not much.
2) Some lag when really overheated:
Faster cool down when in high temp, and more little lag.
You get performace when you really need ! You wont be on low clock when playing games - when you need maximum perfomance, you will have it.
CPU temperature -> CPU clock:
to 45*C -> 1459MHz (Big) 1113MHz (Little)
45-60*C -> 400MHz (Big) 249MHz (Little)
60-104*C -> 1459MHz (Big) 1113MHz (Little)
104*C -> 200MHz (All)
115-120*C -> Shutdown device; Not really reachable. Never reached more than 105*C
GPU temperature -> GPU clock:
Lower than 90*C -> 550 MHz
Higher than 90*C -> 220 MHz
---
---
5) Very aggresive (UNSTABLE!!!)
In short: Really minimum overheating what phone can, but low performance and unstable.
CPU wont go over 55*C in maximum load, that is good and phone is little warm.Totally inappropriate for hard gaming, but for normal use is good.
Tested with interactive CPU goovernor !
Highly recommened do not use performance goovernor !
In phone startup few minutes phone bit lagging, but after few minutes it will ok.In long time maximum cpu frequency and load phone can lag and cause restart.
If you are using phone for basic things, like Chrome, FB, Office, Phone, etc. Its good. But for hard use try another one mod. Minimum Overheating is better and more stable.
CPU temperature -> CPU clock:
Lower than 50*C -> 1459 MHz
Higher than 50*C -> 200 MHz (1 Core)
GPU temperature -> GPU clock:
(As default Sony settings)
Lower than 55*C -> 550 MHz
55 - 60*C -> 400 MHz
60 - 62*C -> 220 MHz
----
----
6) 26.1.A.2.167_Custom (STABLE)
In short: Modifed default sony settings, more effective with minimum lagging !
Used same system as in Minimum Overheating, when reach "limit", turn on all cores (except 1) and clock to 200 MHz. It very fast cool down !
CPU temperature range -> CPU clock:
60 - 70*C -> 1459 MHz
72 - 77*C -> 1459 MHz
76 - 79*C -> 1459 MHz
80 - 81*C -> 200 MHz (1 Core)
81 - 95*C -> 200 MHz (1 Core)
GPU temperature range -> GPU clock:
Lower than 65*C -> 550 MHz
Higher than 65*C -> 220 MHz
----
----
---- Using in real life
Mods are tested with max cpu load, wich my finish is know what is highest temperature of phone with using mod. But for testing in real life need loger time for test.
No Aggresive:
I am using a week No Aggresive mod wich mean phone doing maximum what can, but with more, and really more overheating. But phone alive. Camera app never shutdown! Phone is full time in max frequency (performance goovernor), but in using you feel phone is bit more warm, when playing is hot. Phone never shutdown beacause overheating. If you are like good performace, its good to try this. But dont let phone to be (very) long time in maximum load, max cpu load with camera app and flashlight, its dead combination.(If you do it, then phone go over 100*C,and phone is too hot to touch, but who it doing normally in real use?)
I personally this mod like most, i bought phone with good performace and i knew its is overheating, and dont mind its hot.
Very aggresive:
All important things are in mod title. Its only for basic using, and high cpu load, mean phone will freeze and restart (yes, it did me). If you play with it, good luck with low fps and next freeze. Basic using mean Using Chrome, Phone, SMS, FB. Im not saying dont play videos and dont use camera, it can /and cant lag too, i cant warrant you it, i used camera and YT a lot and all was ok.
26.1.A.2.167_Original
No comment.. This you have if you not modifed it..
Minimum Overheating
I like it. And if you dont like hot phone, but still want play games and use phone a lot, try this. But all is time. In No Aggresive phone never slow down, but temperature is normal 50 - 90*C, when i writing this, phone was 50-55*C. And here we have limit 65-67*C. Its good for gaming not perfect. The clock down from 1.4GHz to 200MHz if you reach 67*C it do for low than one second, and in second is back on maximum. But long time playing it will do more and more frequently.
Minimum Overheating or VeryAggresive? MinimumOverheating better. It is stable and never freeze phone, or lag when using Higher load. (As i say, temperature is 50-90*C in No Aggresive, and Very Aggresive have limit in 50*C.)But phone is warm. Not hot, not too hot to touch, but warm.
Performance Friendly
It lowering cpu clock in 90*C, what in No Aggresive is 50 - 90 is average. As in name, this give you more performance but too more temperature. For gaming, hard and normal use is good. But why i prefer No Aggresive? Beacause when goes to 90*C, phone clock down, and for little time slow down, as in Minimum Overheating. But in No Aggresive is risk to damage device (but i really dont know what this phone can withstand, and i dont want try it), where in Performance Friendly no..
This mod is best for gaming, more better than No Aggresive..
26.1.A.2.167_Custom
To test
No Aggresive 2.0
Really like and using this mod. Prefering before NoAggresive beacause better control When reach high temperatures and gain performance only When you need. Phone stay cold long time (OK, not cold ,but not warm, normal temperature..) and When i start play WoT or RR3 , in first seconds can lag (bit), but its good after that. Phone heat up very much, but can play unlimited time (until battery need charge), but phone will hot.I must inform you i tested it on AOSGP 1.1 ,not in stock ROM (as others). But i think it wont make a sense
----
---- DOWNLOAD
Download link here (Google Drive): https://drive.google.com/file/d/0B4I7i9F9EO0qejRBVlhfVXhFRFE/view?usp=docslist_api
----
----
does your m4 aqua heat more than 70 celcius?
I thought maximum was 60 -65 celcius.
amazing.
anyway nice fix.
thanks alot.
I dont like laggy Asphalt or GTAs, im setting performance goovernor before playing, and it become hot in minutes..
Thank you! I will test it. For now i have only a problem: my phone randomly reboot. I not think its because of battery removed and reinserted, all connectors are ok! I will try minimum overheating and then maximum performances...
Random reboots
I had too random reboots and app crash, i had firmware. 128 Commerical and Journalists, now updated to. 167 and all ok.Good is do LogCat if you have Root and read.. Or send to developers what know it..
hi..! i like your tweak and I appreciate your work. but, I have a small question and am in need of some help. could you please explain me what the numbers mean? i could understand the file partially but to do tweaking by myself... I can't understand exactly how to command a core shutdown.
I am really interested to modify the cpu core behaviour to the temps. i bought this phone indeed to do this and use it without overheating (thanks to you). if you could kindly help, I will do the tweaking according to my likings and will post them to you.
could you kindly do that? please?
thanks in advance
I did what i can
1) Example:
[TUL_8936_NORMAL_BIG_CORE0]
algo_type monitor
sensor tsens_tz_sensor5
sampling 1000
thresholds 50000 60000 70000 90000 100000
thresholds_clr 40000 55000 60000 80000 90000
actions cluster0 cluster0 cluster0 cluster0 cluster0
action_info 1113600 800000 800000 533333 400000
2)What is what:
[TUL_8936_NORMAL_BIG_CORE0]
-- its like title..
algo_type monitor
-- do not modify it..
sensor tsens_tz_sensor5
-- senzor name
-- you can check senzor names in Aida64 or other apps
-- you can change it
-- when temperature in this senzor will reach thresold, or go over, action will trigger
sampling 1000
-- dont modify..
thresholds 50000 60000 70000 90000 100000
-- my favourite thresolds,(=limits)
-- limits are separated with space (50000 60000)
-- limits are in Celsius units (°C)
-- limits are in 1*1000 units, that mean 1°C = 1000. Example: 50000 is 50°C
-- when is this reached, action will started/did
thresholds_clr 40000 55000 60000 80000 90000
-- same as up
-- it is start of limit
actions cluster0 cluster0 cluster0 cluster0 cluster0
-- name of the action (what phone will do)
-- you can change it, names of actions are down
-- actions is knotted to action_info
-- if actions are more than 1, they are separated with + (Ex. Cluster0+Hotplug0+Hotplug1)
--: cluster0, cluster1
-- it will change cpu clock to every 4 cores
-- cluster0 is for .BIG cores , cluster1 for .LITTLE
--: hotplug0 , hotplug1 , hotplug2 , hotplug3 , etc.
-- it will turn on or off core (number at end mean number of core - ex. hotplug0 manage core0)
--: gpu
-- it will change gpu clock
--: s_cam, battery
-- i dont know , sorry
action_info 1113600 800000 800000 533333 400000
-- details of action
-- if actions are more than 1, you can separate it with + (Ex. 1113600+0)
-- here is CPU clock , in Hz (400000 = 400 000Hz = 400MHz)
--: if action is cluster0
-- then here you write CPU clock in Hz (as written up
--: if action is hotplug0, hotplug1, etc.
-- then here you write number 0 or 1.
-- 0 mean CPU Core will Turned On
-- 1 mean CPU Core will Turned Off
--: if action is gpu
-- then here you write GPU clock in Hz
Hello:
I used the "PowerSaving" method mentioned in this post, also I tryed whit ROM Toolbox Pro, to force the CPU stay in 200 MHz all the time.
But it stills overheat like hell: 70ºC when screen is on and 45ºC when screen is off.
Can anyone help, please?
Thanks in adivice
Personally, the first firmware OTA update i had for my 2306 fixed overheating. But why not try Coolify? Seems safer
Question: does this work on 26.1.A.3.111?
Coding is the same as 26.1.A.2.167, just change a few values on 26.1.A.3.111. Default 26.1.A.3.111 seems to have better overheat handling than 26.1.A.2.167.
Gonna backup originals and use MinimumOverheating, see how it goes.
Does this work with the latest android ?
thgm21 said:
Does this work with the latest android ?
Click to expand...
Click to collapse
I trying work perfectly!!
Enviado desde mi PexoRom V1.0 mediante Tapatalk
How can i check if i have it sorted and the config file works?
thgm21 said:
How can i check if i have it sorted and the config file works?
Click to expand...
Click to collapse
I change the governor to performance and it does not decrease the frequencies until I reach the temperature that establishes the configuration in this case (performancefriendly)
Enviado desde mi PexoRom V1.0 mediante Tapatalk