A few weeks ago, whilst changing a flat tire, I broke the LCD screen of my beloved X10 Mini Pro. After no useful response from SE, i decided to do the repairs myself. It turned out quite easy to do. For those that might need a hand in replacing the Front cover digitizer and/or the LCD screen, I put up some pictures of the procedure on my Picasa account:http://picasaweb.google.com/116771174771089812262/X10MiniProScreenRepair?feat=directlink.
The Digitizer and LCD screen is available on Ebay by many different vendors.
All in all for about $50 dollars a replacement LCD screen. If u have a broken screen u might consider doing it yourself, as it was very easy and took about 30 minutes.
Thank you!
I plan to do this someday, of all my phones the X10's plastic gets scratched the easiest!
I always keep the phone in my pocket by itself, and somehow all the edges of the front screen have micro scratches on all sides.
Hi
i would like to ask you about the quality of the new digitizer is it the same as the original or not as responsive.?
thanks
I replaced the LCD screen only, not the digitizer, so I can't answer your question.
However I think if u replaced it with another it would be as good as any other new one? The screen I replaced was as good in any case...
Sent from my U20i using XDA App
Thanks a lot. For 50 $ i bought lcd screen AND digitizer on ebay. Good quality. And it took me 20 minutes with your help.
Can u tell me how to change the rear speaker
Related
Hello Guys,
i have a problem, i had already replaced the LCD-Screen because the old was broken.
But now i got a new problem... if i place the new screen on the digitalizer i got a glimer on the display. I don't now why. But i already discoverd that this effect only appearce if the LCD-Screen is on the digitalizer..
So what is the exactly reason and how can i fix this problem? Is the digitalizer cracked?
Here are 3 Pictures, one is without the digitalizer.
Thank You,
PS: Sorry for my bad english
did you try to fit digitizer in or just holding it upon the lcd?
what would happen if you rotate it 90degs?
are you sure there is no protection foil still on the lcd???
-
behind and on the lcd, there are reflection foils, bluring, light redirecting, polarizating. maybe 6 of them together. some are glued on screen, some are just below it. obviously there is something in digitizer as well, and those in your replaced lcd are not compatible with digitizer.
can you ask for return of the lcd and get another one?
the other option would be getting replacement of digitizer from the same shop.
or third, this effect doesn't look like it's from polarizator. polarizator is glued but those others are not. if it will not change if you rotate it, like with polarizator effect, means it's not polarizator and you can replace those other foils from below lcd. putting ones from your broken screen to the new one. It's quite difficult, but could be done.
okay.. if i rotate the digitalizer the effect changes..
in nearly 90 degree the effect is better than normal.. but not really good..
so is there a magnetism issue??
or whats the reason for this effect?..
could the digitalizer broken? but it's still working..
the display brokes because of violence..
could the digitalizer although broken??
no the digitizer is fine.
the replacement you get was not oem. means was not from the same factory.
someone working in there made some pictures or paintings of the lcd and showed it to his friend who owns a similar factory. He then made this lcd and sold it to you. As he didn't know what sort of, let's call them optic foils, have been used in the original he just put the ones he new were working fine with another mobile. But he didn't expect, as i am surprised too, that the digitizer have an optic foil inside as well. But before realizing, I suppose they already gave bonus to all those little workers and started overnight secret manufacture.
Before realizing the mistake, they already produced a lot of it. To cut the loses, I suppose they created a set of digitizers with a similar practice, which they would sell together with lcd and would be working good.
Now someone, your seller probably thought selling separate lcd would be ok too, so he did. That's why i was suggesting you have right to have an replacement, refund or an new digitizer from him at a fair price.
Of course don't take me too serious on the picture/painting matter, but otherwise I wouldn't be surprised if I came to true quite close
anyway those fake parts are a good quality and in most cases you wouldn't say difference. But shyt happens
as the rotating didn't solve issue completely problem would be those foils below lcd. if your seller would not be cooperative, you've got nothing to loose. open both lcds and change foils over.
Or get a fake digitizer which you would be sure is compatible with that screen.
If not successful, get a combo, lcd + digitizer.
hmm okay..
in the description is written original htc ware..
i had send my seller that problem and now we will see..
thanks a lot for those information..
I would be very interested in knowing how you got the digitizer and screen seperated? Arent they glued and most likely going to break easy?
did you mean the digitalizer and the lcd display or the front screen?
I opened one up once and the LCD appeared to be glued on to the back of the front screen (which I assume is the digitizer?)
ah okay.. eeerm.. i don't know that the lcd was glued on the digitalizer.. because my display has broken and the liquid was out of the display.. so the LCD was easy to take off..
But I've read some guys has warmed it firstly with a hair dryer and then they could take the display off..
hx4700 Killer said:
I opened one up once and the LCD appeared to be glued on to the back of the front screen (which I assume is the digitizer?)
Click to expand...
Click to collapse
you make me want to open ma rhodium.
if it's glued use a razor, or heat gun & blade like on apples.
then clean it and put new tape.
fake3 said:
ah okay.. eeerm.. i don't know that the lcd was glued on the digitalizer.. because my display has broken and the liquid was out of the display.. so the LCD was easy to take off..
But I've read some guys has warmed it firstly with a hair dryer and then they could take the display off..
Click to expand...
Click to collapse
yeah dryer is maybe more safe just keep it below 100 cels. but it's not so vulnerable on bending too.
fake3: you sure you don't have protector foil on that lcd you bought?
i been playing around and get similar efect with a protection foil below polaroid.
there was still one protection foil on the front of the lcd.. but i already removed this foil..
but can you make a picture where the foil the polaroid is??
fake3 said:
there was still one protection foil on the front of the lcd.. but i already removed this foil..
but can you make a picture where the foil the polaroid is??
Click to expand...
Click to collapse
I was playing with just a generic foils. not rhodium.
They can put filters inside plastic nowadays. and mix even more of them and it's all still tiny.
If there is one in digitizer, it would cut sun reflections of lcd and would make good sense.
Glass could be tented, too. digitizer is usually one glass and one foil.
even if you would find something glued on lcd or digitizer, it's not possible to take it of without damage. I talked to people producing foils and applying them they can't take that off too.
There have you be one polarizer glued on front of lcd, otherwise you would see nothing. And they usually gluing one on back. That make the light more efficient. redirect light in useful directions, but is not necessary, that is another possible difference in your case. And probable, because it spares $ and space. But it's glued - no help there if that's the case.
but then there are all those which are dispersing light evenly, those you can try to change. They all have to be used in a set working together they create
something called Brewster condition, if that's not met, you see something like you see on your screen. every active foil is a part of it, and obviously there is something in your digitizer.
Just had another though, there is a small chance that htc decided to change factory or producing process themselves. and both are original. But I wouldn't say that's very probable.
So guys,
i solved the problem..
I bought an new Digitalizer from the same seller and now it works fine..
Thanks a lot for the hint with the different manufractures..
Greetz
happy to hear that
no worries
guys.. i wan to ask something..
my LCD is glued to my digitizer. since both of it is broken.. i juz throw the whole part away.
but then, i diden really glue my new / replacement LCD to my digitizer.
so i assume they did have some space in between.
although my rhodium works well now, but my digitizer only able to sense fingernail o stylus only. anything a tad bigger than fingernail, it wont pick up. neither my thumb nor my finger.
is this possible due to the space in between the screen made it so? or my digitizer was some lousy quality stuff?
devalian said:
guys.. i wan to ask something..
my LCD is glued to my digitizer. since both of it is broken.. i juz throw the whole part away.
but then, i diden really glue my new / replacement LCD to my digitizer.
so i assume they did have some space in between.
although my rhodium works well now, but my digitizer only able to sense fingernail o stylus only. anything a tad bigger than fingernail, it wont pick up. neither my thumb nor my finger.
is this possible due to the space in between the screen made it so? or my digitizer was some lousy quality stuff?
Click to expand...
Click to collapse
The digitizer is a seperate part from the screen. It sends X - Y coords to the device letting it know where you pressed and the device coorelates that to what was on the screen where you pressed.
What I am saying is that you could have the two pieces seperated the screen in one place on the digitizer in another and you should still be able to press on the digitizer and have the device react appropriately.
The digitizer works independantly from the screen.
haha.. so in short.. it means by digitizer is lousy rite?
I Have de same problem, I need a new lcd screen but i dont know where buy
please help me
and i need the service manual
Thks
hi
I have some scratchs on my screen and I am looking for a replacement digtizer.
I found several on ebay,
http://shop.ebay.com/i.html?_nkw=xp...+screen&_osacat=0&_trksid=p3286.c0.m270.l1313
Have anyone replaced the digitizer or know if this are original?
Thanks!
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
ClintonH said:
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
Click to expand...
Click to collapse
Hi
I removed the factory screen protector. when I got a couple of scratches I applied a new protector.
But the few scratches I have are ittitating me!!!!
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
--duplicate--
I wish one of these ebay listings gave a part number or model number for the digitizer... for obvious reasons.
trojjanhorse said:
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
Click to expand...
Click to collapse
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
mezo9090 said:
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
Click to expand...
Click to collapse
Hey Mezo,
The digitizer is factory glued with the top glass and is considered one piece since you can't separate the two. The LCD is separate from the digitizer. If your LCD is cracked, then your display will be distorted with lines across the screen. If your top glass is cracked, then your digitizer will still work since the digitizer is not as fragile as the top glass. So the question is, is the top glass cracked? Is the LCD display cracked as well? I know your digitizer will still be functioning but you might want to consider buying a new one as for the cracks may be unappealing and annoying.
I simply broke the top glass and I did not like the crack spanning across my screen so I got myself a new one.
If your LCD is damaged then you need to buy a new LCD which is not cheap... (over $100).
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
mezo9090 said:
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
Click to expand...
Click to collapse
Most likely you have broken the LCD. When dark pixels appear like that, it usually means that you've directly struck the LCD itself and damaged that area.
It was a thin line at first then some Ink started to flow and became bigger the next day.
So its the LCD?
should I fix it at the service center or i can replace it myself?
sent from my x10i that is banging for a 2.1 upgrade. ...
You can, in theory, fix it yourself but it'll be a biatch of a job. Use the X10 undressing post to find out how to actually take it to bits...
Then put the new LCD in.
only issue is finding somewhere that sells them... I don't know if they're a generic 854x480 lcd or what so...
To change LCD is very simple, but to change the digitizer is suicide. You will need to get a new LCD. I would buy one off of ebay and install it myself. I've been fixing phones for 2 years now so I had my share of experience but it may be difficult for you. The black liquid is due to the fact that LCD stands for "Liquid" Crystal Display
Good luck.
Hi I drop my dell today on the floor and screen its cracked phone was bought about 3 moths ago so its still under warranty in tesco UK and dell ... also I got 1.9.0 streakdroid on it ... heh any ideas folks? did they goin to replace a screen for free? I ll lie them a bit and say " I had my phone in pocket and when I want answer the phone screen was cracked that may help?
Also I found screen from China , do you think its should be ok ? cos price is really good
http://cgi.ebay.co.uk/DELL-Streak-m...203?pt=LH_DefaultDomain_0&hash=item2a1031b3e3
I live in UK
Cheers
I did the same the other day, ordered a new screen waiting for it to come. Bargain at £28. I think lying to them to get a new screen is a bit harsh behaviour its your fault you dropped it, and should be your responsibility to fix it at your own cost.
let me know about this screen is worth to buy if u get it , btw gorilla glass should protect the screen ...
what do you mean gorillas glass should protect the screen?
Yes I think its should ... if not so what is it for?
Yeah to a certain extent but its not indistructable, mine dropped from 5 foot onto a tiled floor, and the glass didn't break, just the screen underneath, which is pretty strong IMO.
Hello zinqzinq,
i have already swapped an lcd on my streak. easy to do. I have ordered my lcd also in china and quality was perfect...
some tips:
take attention to ALL cables, special the little cable for the buttons are sensitive.
remove Mainboard before removing lcd.
use a hair dryer to make double sided sticker, what will hold lcd in streak, warm before remove lcd
sure you will know what i mean, sorry for my bad english...
Good Luck
regards
I'm waiting for my replacement screen good tip mate thanks for that
Hello again,
for full Replacement Guide take a look here:
http://forum.xda-developers.com/showthread.php?t=995036
Regards
My Nokia Lumia 920 Glass shattered after it was dropped from 2.5 feet, it landed on the glass and shattered, the touch is working fine and the display is also fine, no leaks and displays everything properly. When I took the phone to Nokia Care they informed that the whole glass, digitizer and LCD has to be changed even though the latter two were working fine and asked me around Rs.15000 (approx 280 USD) to fix it. Is it possible just to replace the glass. I recently ordered a digitizer in ebay and it was shown with glass and when I received the package it just had the digitizer without the glass and it didnt look like OEM at all. Am planning just to order the glass and use my existing Nokia digitizer that came with the phone if there is a way to separate the digitizer and shattered glass. Please let me know what I will require to fix.
theonlyremedy said:
My Nokia Lumia 920 Glass shattered after it was dropped from 2.5 feet, it landed on the glass and shattered, the touch is working fine and the display is also fine, no leaks and displays everything properly. When I took the phone to Nokia Care they informed that the whole glass, digitizer and LCD has to be changed even though the latter two were working fine and asked me around Rs.15000 (approx 280 USD) to fix it. Is it possible just to replace the glass. I recently ordered a digitizer in ebay and it was shown with glass and when I received the package it just had the digitizer without the glass and it didnt look like OEM at all. Am planning just to order the glass and use my existing Nokia digitizer that came with the phone if there is a way to separate the digitizer and shattered glass. Please let me know what I will require to fix.
Click to expand...
Click to collapse
I broke mine recently too and after calling several local phone repair places (got similar quotes), I was convinced that the best bet was to order the whole screen assembly (including the LCD, digitizer and flexible key ribbon) and then do it myself. the assembly cost me just under $100 and was easy to replace with the help of the video on ifixit (here).
You can do just the digitizer, but its risky. The digitizer (the glass) is adheared to the LCD screen, and as I learned with my HD2, its very easy to ruin the LCD when separating the two. Within the guide posted above, there is a seperate guide for doing this (the link appears at about the 17:50 mark), you just have to be very very careful.
One last tip! The flex ribbon for the volume, power, and camera keys is very fragile and can easily tear when you're assembling/disassembling. I ended up ruining the original one when disassembling, then despite being extra careful, ruined the one on the new screen when reassembling, then had to wait a week for another new ribbon that I ordered off ebay. Watch out for the little plastic nub on the inside of the casing by the camera button. It sticks straight out towards the key ribbon and cuts it like a knife. That's what ended up tearing mine both times.
Good luck!
Hamburg said:
I broke mine recently too and after calling several local phone repair places (got similar quotes), I was convinced that the best bet was to order the whole screen assembly (including the LCD, digitizer and flexible key ribbon) and then do it myself. the assembly cost me just under $100 and was easy to replace with the help of the video on ifixit (here).
You can do just the digitizer, but its risky. The digitizer (the glass) is adheared to the LCD screen, and as I learned with my HD2, its very easy to ruin the LCD when separating the two. Within the guide posted above, there is a seperate guide for doing this (the link appears at about the 17:50 mark), you just have to be very very careful.
One last tip! The flex ribbon for the volume, power, and camera keys is very fragile and can easily tear when you're assembling/disassembling. I ended up ruining the original one when disassembling, then despite being extra careful, ruined the one on the new screen when reassembling, then had to wait a week for another new ribbon that I ordered off ebay. Watch out for the little plastic nub on the inside of the casing by the camera button. It sticks straight out towards the key ribbon and cuts it like a knife. That's what ended up tearing mine both times.
Good luck!
Click to expand...
Click to collapse
XDA doesn't have a specific forum for the 1520 and XDA needs one. I bought my wife a 1520 and dropped it the first day (slippery case). Broke the glass in two corners and really doesn't effect anything and you can barely see the cracks. But, I too would like to replace it. Haven't tried to get an estimate and I am very capable of replacing myself. I have the insurance but that will cost $200.
Ideas or suggestions, other than don't drop your phone!
Hi Guys,
i think the most of you know, that the Z2 has a really poor glass quality. (My phone fell down from about 30 CM to a carpet and the screen had a little crack and the touchscreen didn't work. (Insurance of my friend payed for this, because he has thrown it down)
The costs for the repair were 200 €!
Now i found this on ebay: http://www.ebay.de/itm/Orig-Sony-XP...zer_Ersatzteile_Werkzeuge&hash=item3a9f2231e3
It was sold 53 times, but i thought you can't replace only the glass?
Or is it possible?
No, dont try it, I already bought one of them but at the end I experienced that the glass and lcd display is sticked to each other and not seperable.
I had to buy another one with lcd+glass and was able to fix.
They are selling but its a fault, we do not have factories to combine those glasses with lcd. They are cheating, be careful.
It‘s a incell screen so can't be separated
Glass and screen are seperate on Z2 from what i saw when i disasembled my phone.
Envious_Data said:
Glass and screen are seperate on Z2 from what i saw when i disasembled my phone.
Click to expand...
Click to collapse
On my D6503 glass/digitizer/lcd was glued together. Changed display recently because of a tiny fall.
But atleast its fairly easy to change.