So, I am new to this site and to the android community. I apologize if I sound stupid to any of you but if you aren't going to help I'd appreciate it if you just ignored me.
Anyway, I got my Atrix a couple days ago on AT&T and started learning about rooting and such. Everything on it is still stock, last night I upgraded to Gingerbread from Froyo and I'd just like to know if there's any specific rooting program, method I can use right now for 4.5.91 Also, when I upgraded I lost my music player widget, is there I can get it back without going back to Froyo?
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
will there be any severe consequences if I screw up?
Use gingerbreak.
Sent from my MB860 using XDA App
TheToiletSpaula said:
Use gingerbreak.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I've read that gingerbreak doesn't work with this version. I'll look it up though.
phobos512 said:
follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my mb860 using xda app
Click to expand...
Click to collapse
^^^^^ only way to root gb and probably the best way if there are other methods
savier420 said:
^^^^^ only way to root gb and probably the best way if there are other methods
Click to expand...
Click to collapse
cool, just one question. Am I supposed to have the device connected to my computer the whole time? and if not between which steps should I connect/ disconnect it? also, when I put the root.img in the C: folder, do I put the zip file or just the .img inside of it?
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
PSY0NIC said:
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
Click to expand...
Click to collapse
Since this is the 1st time I've seen some one say it this way....
If you are just trying to "root" your phone only, YES, this is the best method.
Brand new phone, all stock... just want root.... use gingerbreak?
Sent from my MB860 using XDA Premium App
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
hambone123 said:
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
Click to expand...
Click to collapse
I'm about to try it but I'm still confused about a few things like when exactly to connect or disconnect my phone and what to do after I've entered all the commands on my computer, will it install by itself? This is my first time rooting a phone, and my first time even owning an android so I want to make sure I know exactly what I'm doing
I hear you man, it's nerve wracking to worry that you're going to brick your phone. I did the gingerbreak on the last release and it worked perfectly. I'm sure this method will work fine as well, as you said I just want to be sure I'm doing the right thing for my goal: stock phone/downloaded updates/rooted. Best of luck, and thanks to anyone who gives us noobs some more reassurance.
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got, before i updated to the OTA GB i had BL unlocked and rooted, just flashed back to 1.2.6 to be rid of root and unlocked BL, then just went throught the OTA updates to get to GB and im loving it, dont really care to flash any other custom roms, BUT BEWARE DOING THE OTA TO GB AND UNLOCKING THE BL THEN TRYIN TO FLASH BACK TO A STOCK ROM WILL HARD BRICK SO DO YOUR RESEARCH so if u dont want a hard bricked phone dont do the ota stick to custom roms and ignore all OTA'S
so I got through the fastboot reboot command, phone booted back up automatically, then put the phone into debug. Then typed in the adb shell code and said the specified path could not be found.
Now I was still in the command prompt that said the c:/root
What did I do wrong?
So, adb says it is a bad path?? Do this instead..it is easier and it works -- I did it this way last night!
After "moto-fastboot reboot", once your phone has completely rebooted, go to the Android Market and download and install "Terminal Emulator." Once it is instslled and you have opened it, enter the EXACT SAME commands that you were going to type into the Adb Shell..once again, type in the commands VERBATIM. After the last command, there should be a message saying (in terminal emulator) that it was successful! Congrats, you have achieved root access on the AT&T issued stock Gingerbread 2.3.4 build! I hope it works for you!
~Eric
savier420 said:
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got.
Click to expand...
Click to collapse
I'm very vanilla. I root pretty much entirely for free wireless tethering and being able to delete bloatware.
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
aroca1978 said:
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
Click to expand...
Click to collapse
Updating to GB won't brick your phone. After updating to GB you can't down grade to older OS (like the one your on right now) that would brick your phone. So as long as you don't plan on going back to a past OS version (and I don't know why anyone would) you'll have no problems at all. As for Rooting >follow this link< and follow the instructions there after you update to GB. It works perfectly, you don't have to unlock your BL or anything else like that to just have Root on GB. Hope this helps.
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
For Questions about BL Unlocking
aroca1978 said:
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
Click to expand...
Click to collapse
Click on the link below, that thread will give you the answers and files your looking for.
> Click Here <
Okay, here is the situation: I have an Atrix (obviously) that I rooted using the Gingerbreak.exe downloaded from here http://forum.xda-developers.com/showthread.php?t=1046626. I just tried to update my phone to Gingerbread using the OTA update in About Phone and it failed; I’m assuming it is because I have rooted the device (if not please correct me and tell me what I did wrong). So I hopped onto these forums looking for a way to undo the root, or a way to get the update to work, and my eyes have glazed over. Could someone please tell me how to unroot my atrix before i use it as a hockey puck
I posted a thread very similar to this. You should look around.
http://forum.xda-developers.com/showthread.php?t=1184199
Now honestly, I have no idea why it didnt let you update, since I used SuperOneClick with Gingerbreak and it seemed to work after updating, Didn't really test out any SU apps but I still had it. To think of it, It's kinda useless for me to state that, however it states success...
One of the options for you, since you are still on Froyo and apparently rooted are to install Gingerbreak 1.2. I'm not 100% sure if it will work, but i do know it can't harm your device.
After you install Gingerbreak 1.2, you should root again, then after the reboot, reopen the app and unroot. This method should be flawless since you did re-root with the app. But again, Not 100% sure. And right now you can unlock your bootloader and just start loading if you'd like. That is a much easier and safer way to do it. Plenty of tuts on Android Dev forum here.
lol don't worry about unrooting. I'll tell you that much.
It's not so much of a problem with root, but moreso the pre-test that accompanies the OTA. If you fail it because you use Titanium to clear out bloatware and stuff like that. even if you remove root, you still won't be able to upgrade. Instead, just use this method.
Just download the Automated Upgrade for PC Users and let your phone upgrade. All your data should still be there, but backup before just in case. Oh, and if you wanna root again after you upgrade (cause i mean, why WOULDN'T you want root?!), just use the preinstall method (hehe I'll leave this for you to search. it'll be good practice for the future, i promise =])
happy upgrading!
~jojojohnson7410~
Hi all!
So after alot of thinking i've finally decided to take the plunge and upgrade my phone to an android phone. Im liking the atrix and i really wanna go for it, i just got a couple of questions.
The one im planning on getting in unlocked, and rooted, though i can have him unroot it for me. Now my current phone is my 4 year old nokia 5530, running a custom rom i flashed a while back, so i know abit about flashing. Now rooting, this is the 1st time i've heard off it.
Im new to all this, and I get the advantages, but really at the moment all i really need from it is the ability to install non-market apps, but from what i've gathered so far, it seems i cant update OTA to ICS (when its released) without bricking my phone if its rooted?
Isnt there any way to be able to install non-market apps without rooting? Or rather a way to have it rooted and still be able to update when the official ics release is out?
Cheers for the help guys
Oh and btw its running the official 2.3.4 GB
You have a few options, but what you choose is all really up to you.
First, I recall there being a way to sideload (run non-market applications) in Froyo via a script on the computer, but it required being at the computer every time you wanted to load one. But since it's running the official Gingerbread update, you should just be able to change an option to sideload, no hacks and no rooting required.
If you're still interested in rooting, there's a simple root method that could likely be undone, if the device is still new enough to be under warranty. See this thread. http://forum.xda-developers.com/showthread.php?t=1255548
And finally, if you want to unlock your bootloader and try your hand at custom ROMs (and lose much hope of any carrier/manufacturer support), go here: http://forum.xda-developers.com/sho... have a simple way to use it via other means.
cant really search for this seeing as i wanted to ask the developer directly but i cant due to new user restrictions but anyway...
i downloaded the generic shell helper from bunny... GSH-RC2.rar to be exact
and my question is will this program be able to disable root regardless of the method used?
before you ask, no i did not root the phone myself and the person that did it for me is out of touch. i do beleive he mentioned Zerg- if that helps at all.
thanks for the help guys
snoballz said:
cant really search for this seeing as i wanted to ask the developer directly but i cant due to new user restrictions but anyway...
i downloaded the generic shell helper from bunny... GSH-RC2.rar to be exact
and my question is will this program be able to disable root regardless of the method used?
before you ask, no i did not root the phone myself and the person that did it for me is out of touch. i do beleive he mentioned Zerg- if that helps at all.
thanks for the help guys
Click to expand...
Click to collapse
Though you don't need to unroot to take the update here are some instruction to unroot.
I don't know if that will unroot you, but I do know that an app called Supersu will.
Step 1. Download SuperSu from the market
Step 2. Delete Superuser.apk from /system/app
Step 3. Open up Supersu and update Su binary.
Step 4. Scroll all the way to the right and go to the bottom
Step 5. Select Permanent Unroot.
Your device will be unrooted!
well the reason is that ever since i had the phone unrooted, it wouldnt allow me to update the phone, as it was installing the update it would say update failed. im not sure if theres a difference between unrooting and "returning to stock" as my cousin put it.
anyway ill get on that right now and see where that puts me.
thank you so much
** actually before i do anything, i wanna clarify if unrooting is the same as returning to stock.
ive never done this before so please bear with me lol, i guess whats most important is that i dont lose the photos i have....contact can just be re-synced on google
snoballz said:
well the reason is that ever since i had the phone unrooted, it wouldnt allow me to update the phone, as it was installing the update it would say update failed. im not sure if theres a difference between unrooting and "returning to stock" as my cousin put it.
anyway ill get on that right now and see where that puts me.
thank you so much
** actually before i do anything, i wanna clarify if unrooting is the same as returning to stock.
ive never done this before so please bear with me lol, i guess whats most important is that i dont lose the photos i have....contact can just be re-synced on google
Click to expand...
Click to collapse
No, unrooting and stock are 2 different things. Unrooting, obviously, just ranges away root privileges. you can think of returning to stock as re-installing windows, like you just bought the phone.
Photos should be fine, a they should be stored on your external SD card. If you are worried about losing your pics, just plug your phone into a computer and copy your pics to your computer.
Sent from my DROID RAZR using XDA
Questions go in Q&A
So I have a completely original Neo, still on the on the original Gingerbread (2.3.3) it had and I don't quite know how to proceed.
The only thing I do know is that if at all possible I don't want to unlock the bootloader.
Ideally I want to back everything up before I do anything but from my understanding Titanium Backup needs root to back everything up so that creates a bit of a catch 22. Similarly installing CWM so that I can access recovery is risky and could break everything so I'd want a backup first but for that I need either root or recovery so another catch 22. So what would be the safest option?
Also I want to update to ICS, I figure it's about time I get my phone current, but I don't know in what order I should do that in either...
Should I gingerbreak my Gingerbread and then update to ICS?
Should I just update to ICS and then root?
Should I upgrade using generic firmware to a version supporting the zergRush root, then root and then continue updating to current ICS?
I'm fairly confident I can get everything right first time on any method (and I know what all the methods are/am to not to lazy to research the methods myself) but I just can't figure out the safest course of action here...other than staying on Gingerbread for the duration of my phone contract.
Any help you can give me is appreciated.
Start by reading the stickies in the development section, do some reading and you'll know
look at the stickies in neo v section too
Ok so you're saying I should follow the "noob's guide" exactly and try a zergRush Root first? (Skip unlocking the bootloader since it'm not interested in cutoms roms with custom kernels) and then install CWM and make a nandroid backup?
Ok....but that still doesn't tell me whether I should update first or root first?
Also I can't seem to tell from it's thread whether the zergRush root works on the latest ICS (I don't see mention of .431 in the thread with .62 apparently being the last version that worked so that would be a no then?)?
Also my case is different because I could actually even still root with Gingerbreak if that was best/safest unlike most people trying to root (I never downgraded either so I wouldn't be exposed to the 0% issue).
ZergRush method doesn't work on fw's after .42.
There is another method, which you can find in sticky thread in general section.
First update, then root, as root is gone after flas/update.
p.s. whatever you do, just don't flash android 2.3.2 on your phone after you flash 2.3.4, but there is no really point in going to that old fw, same as there is no point in still being on 2.3.3.
Root is only gone if I don't update OTA
SCHUMI_4EVER said:
Root is only gone if I don't update OTA
Click to expand...
Click to collapse
Really? Thanks for telling me that..
I know that, I also know that you can't update from 2.3.3 to 4.0.4(which you said it's your initial goal, in your first post) via OTA. Or you can?
As far as I know I can but I admit I haven't checked yet. I don't see why once it's available for my region through the PC Suite it shouldn't also be available OTA.
Try and let us know.
It's not same if you're updating from x.x.x to x.x.y and from x.x.x to y.y.y, in first case OTA is possible, in second case I kinda doubt
I also didn't try, but if I remember correctly that's how it is.
Yeah but surely it should then just be 3 steps? So from x.x.x to x.x.y to y.y.y...that would would make sense to me anyways
Still reading up on a bit of other stuff then I'll check
http://forum.xda-developers.com/showthread.php?t=1973017
hope it helps..