Related
Hi everyone,
I bought a new vibrant a month ago, they unlocked it at the store. and i've used a local US sim card since then.
now when i got back home (i'm not living in the US) it appears to be locked - network lock.
I've tried the SGS app but i'm getting an error(I have root) it just doesnt find any codes.
I've uploaded the nv_data file. if someone can take a look.
i looked for the code in it but i didnt find anything.
what other options do i have? i'm very frustrated
Are you on the original firmware? I'm pretty sure that you need the original firmware to get the unlock code
Sent from my SGH-T959 using XDA App
no, i updated to JI6...is that the reason?
i also uploaded the screen of the sgs if it helps
k2k1 said:
Hi everyone,
I bought a new vibrant a month ago, they unlocked it at the store. and i've used a local US sim card since then.
now when i got back home (i'm not living in the US) it appears to be locked - network lock.
I've tried the SGS app but i'm getting an error(I have root) it just doesnt find any codes.
I've uploaded the nv_data file. if someone can take a look.
i looked for the code in it but i didnt find anything.
what other options do i have? i'm very frustrated
Click to expand...
Click to collapse
You said you used a local US carrier SIM, was it AT&T? If you put a Tmo SIM, it will of course work becsaut it's a Tmo phone. I hope those guys don't fool you.
You'll need to revert back to stock JFD. I hope the JI6 didn't messed up your nv_data file. or try to use a hex editor and read your nv_data file.
i tried my own sim, its not TMO.
so rolling back to the original is my only chance?
where do i get the original firmware?
I tried read it with hex editor...i didnt find any string that looks like a code
k2k1 said:
i tried my own sim, its not TMO.
so rolling back to the original is my only chance?
where do i get the original firmware?
I tried read it with hex editor...i didnt find any string that looks like a code
Click to expand...
Click to collapse
I just ran your nv_data with sgux and no code...so most likely JI6 wipe your nv_data. going back to JFD may not help. I guess you'll have to spend another 10-20 USD buy paying someone to do get an unlock code via IMEI.
k2k1 said:
no, i updated to JI6...is that the reason?
i also uploaded the screen of the sgs if it helps
Click to expand...
Click to collapse
Yes that is the reason. JI6 kills the unlock
did you happen to do a backup?
Edit: See this http://forum.xda-developers.com/showthread.php?t=802143
Your unlock code was replaced with all F's.
Look for this string. It starts on Offset 180000
SSNV/A=.ÇÓᜠã:*íêºæp~.‘.´}~=3þ...v:.+o.ಃPÆ+$4^ØB/¤º.¼è£.wÏ.á$nå¨÷ddý÷.FFFFFFFF..........
Replace the F's with your unlock code. Save, then push the nv_data.bin back to your phone.
This is the app I am working on. It will search for SSNV and if it sees all F's it will either allow you to replace them with your original unlock code, or generate a new one for you.
I'll work on it tonight.
i dont have a backup of the file i'm so mad at myself because i didnt know i can unlock it by myself...
if I only knew what would happen if i upgrade...damn!
i dont have the unlock code neither...
k2k1 said:
i dont have a backup of the file i'm so mad at myself because i didnt know i can unlock it by myself...
if I only knew what would happen if i upgrade...damn!
i dont have the unlock code neither...
Click to expand...
Click to collapse
edit the nv_data you posted in your OP.
replace the F's with 12345678.
12345678 will be your new unlock code.
Thread moved to Q&A, Post questions in the correct Q&A Section.
krylon360 said:
edit the nv_data you posted in your OP.
replace the F's with 12345678.
12345678 will be your new unlock code.
Click to expand...
Click to collapse
thanks for the advice
but it didnt work...i replaced the file, tried with my sim...
k2k1 said:
i dont have a backup of the file i'm so mad at myself because i didnt know i can unlock it by myself...
if I only knew what would happen if i upgrade...damn!
i dont have the unlock code neither...
Click to expand...
Click to collapse
Look a post 107 on this page:
http://forum.xda-developers.com/showthread.php?t=771158&page=11
update:
i ordered a code from cellunlocker and it didnt worked for me
what's wrong with my phone?
i dont know what to do, maybe the code is wrong, maybe not...
you guys said going back to the original ver wont help
Disclaimer
Code:
Neither Me Nor XDA Are Responsible If You Lose Your Job/Break Your Device.
Your Warranty Is Now Void
Downloads :
WIP
Instructions :
Extract The .rar
Open The Setup File And Install LG Flashtool
Right Click On The Shortcut Created On Your Desktop And Open File Location.
Copy The .dll Files From The DLL Folder To The Previously Opened Location And Replace The .dll In Flash Tool Folder If Any.
Open The Flashtool,Select The .dll Then The .tot/.bin File And You Are Ready To Flash The Firmware,Connect The Phone In Download Mode When Asked.
Note :
I Don't Know Whether It Works For N4 Converted Devices.I Had Successfully Flashed Stock .20 .bin File With It.But I Suggest To Use This Only When LGNPST Does Not Work/Fails To Flash The FW As For Me.Please Don't Perform Unwanted Experiments With Your Device Or It Will Result In A Hard Brick.
This Guide Was Originally Created By madmack @ Optimus G Pro Section So Thanks To Him.
I was Searching For The .dll File For Our Device And Found It So Decided To Create A Thread.And Those Who Are Thinking That The Required .dll Is The Same That We Use For LGNPST,NO,This Is A Different .dll
It Did Not Ask For Unlock Code When I Flashed The Stock JB FW.But As Posted By madmack there is A Possibility That It Can Ask For Your Unlock Code.So Proceed With Caution.
Again This Is A Alternate To LGNPST And Only I Have Successfully Flashed The Stock FW.It Is Recommended That Unless It Is Tested By 4-5 Experienced Users,Its A No Go For Noobs/New Users.
And Be Advised That This Process Will Wipe Your Internal Storage.
Enjoy!
Regards,
acervenky,
XPT
reserved
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Googler_1976 said:
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
Click to expand...
Click to collapse
Changed The Status To WIP.
Will Search For The Info And Update The Thread Soon
Regards,
acervenky,
XPT
autoprime said:
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Click to expand...
Click to collapse
Yup.
Regards,
acervenky,
XPT
Download link is missing.
I've try to found the download link for the Lg Flash tool on this page, but i haven't. Can you fix it or explain? Thanks anyway.
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
cougar214 said:
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
Click to expand...
Click to collapse
Here is the file you need to get her phone back to STOCK U.S: http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip I'm not sure on the DLL file, I use LGNPST so not sure if they are the same but attached it also just incase you can use it.. stock firmware file above is a .tot file so if you need to you can just change it to .bin if you need to.
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
cougar214 said:
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
Click to expand...
Click to collapse
Where do you go check to see if its U.S or Korean?
All settings--> about phone -->phone Identity.
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
cougar214 said:
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
Click to expand...
Click to collapse
After a little checking I found out the same thing, It was normal as it was the place of manufacturer. I'm not sure what the problem might be but as far as I know that's the stock firmware for the phone.. You might try this one out http://www.androidfilehost.com/?fid=22901594685177912 you just boot into recovery do the normal wipes and flash through recovery, its supposed to be stock except for being rooted and as far as I know those are the only two stock files floating around for the phone...
Thanks Blake. Can you confirm for me that this phone will NOT get OTA updates if it's changed in any way, including rooting? It's what I was told by someone else. If that's the case then I guess there really is nothing wrong with the phone except those weird unexplained small changes.
I've got all the correct files download and I made it so far as to try to actually flash the phone, but it fails and gives me a wrong model number message because it's detecting my phone as a E960 (it's an E970). Any ideas? I had installed the latest CM11 ROM over some encrypted data and now I'm locked out (old encryption PIN doesn't work) and I can't restore it to stock.
can someone help me with a .tot or .bin stock for lg l70 d320n? cuz i"ve looked for it everywhere but couldn"t find anything
need help bad.
i got this phone from a friend and it originally had cm11 on it. the phone in question is the lg e970. i wanted to get back to stock. so i downloaded the correct firmware and added it to my external sd card. using twrp before i proceeded to wipe the phone via twrp. when it was finished i restarted the phone into twrp and went to install the stock firmware and i could not find my exsd card. twrp does not recognize it at all. so now im stuck with a phone with no os on it. i can ge into twrp and download mode, and when i just boot the phone it goes to lg logo and stays there. i need help in trying to figure out how to get stock firmware back on phone. i am used to samsung phones and odin. so im a noob when it comes to lg. i am very tech savy when it comes to computers. plzzzzzz any help would be great!!!!!!!! and appreciated
I can not add .tot file in LG flash tool
I have unrooted my lg g3 before on another computer. But i can't add the .tot file with my new computer. I am doing everything the same.
Does anyone have any ideas?
Hello guys!
Is it possible to get out recovery.img from a official rom.zip file for OneX+?
I have a half bricked OneX+ Vodafone UK and it doesn't show the IMEI number. I want to flash it via Y Cable or via fastboot with latest official rom: PM35IMG_ENRC2B_U_JB_50_S_Vodafone_UK_2.17.161.2_Radio_3.1204.169D3.33_release_329050_signed.zip (got it from a friend,who works in the authorized HTC service center).
I tried relocking bootloader and flashing it with this rom,but it always fails at signature verification. This is the official latest rom for this exact phone,cid and product code, downloaded specially for this phone from official servers.
I can extract the main zip file and then I get 4 files from it.
When I try to extract the largest zip file from archive, it doesn't open with winrar,but does open with 7z. But,I can't extract those files with 7z.
So now I'm looking for stock recovery from this exact rom or for someone,who can help me extract it from this rom. This is the only option I have left and I can't find any info on how to do it. Or any other way,how can I install this rom to phone?
Please help!
I am surprised that the signature verification fails given that it is an official file and you have relocked the bootloader. What command are you using to flash it?
If you want to extract the zip on your PC then you might need to use https://github.com/kmdm/ruuveal to decrypt it first.
Okay,so after a few hours repeating the same procedure again and again, somehow I finally managed to reflash it via the Y Cable. But,only via the Y Cable, fastboot still didn't flash it.
Anyway, the problem is not solved and I still don't have the IMEI number back. Tried a lot of stuff, to get it back, but no results.
Anyway,I talked with my friend at the authorised service center. He said,that these problems may happen even with OTA or official RUU updates. They don't have any options to repair them other than reflasing it or changing the main board. But since this device is not from our region,but from UK Vodafone, he's not allowed to change the board. So, guess I'm out of luck and unfortunately this piece of cr*p is on Nvidia, so I cannot repair it via JTAG. :crying:
Anyway,thanks!
ReeLT said:
Okay,so after a few hours repeating the same procedure again and again, somehow I finally managed to reflash it via the Y Cable. But,only via the Y Cable, fastboot still didn't flash it.
Anyway, the problem is not solved and I still don't have the IMEI number back. Tried a lot of stuff, to get it back, but no results.
Anyway,I talked with my friend at the authorised service center. He said,that these problems may happen even with OTA or official RUU updates. They don't have any options to repair them other than reflasing it or changing the main board. But since this device is not from our region,but from UK Vodafone, he's not allowed to change the board. So, guess I'm out of luck and unfortunately this piece of cr*p is on Nvidia, so I cannot repair it via JTAG. :crying:
Anyway,thanks!
Click to expand...
Click to collapse
Hi ReeLT,
Is your phone stuck in airplane mode? Hence no IMEI?
I have the same issue with my O2 HOX+.
Am looking to either revert to stock HTC or to O2_001 stock.
patela20 said:
Hi ReeLT,
Is your phone stuck in airplane mode? Hence no IMEI?
I have the same issue with my O2 HOX+.
Am looking to either revert to stock HTC or to O2_001 stock.
Click to expand...
Click to collapse
No,it's not stuck in airplane mode. It just doesn't have IMEI number,so phone does not see SIM card.
Anyway,I can try to get the official latest ROM for you, I'll need to see all the barcodes that can be found in the Show Barcode option in bootloader. Make a picture of it and send it to me. I'll try to get it next week.
Maybe you'll need a Y Cable to flash it, because in my case I couldn't flash the Rom.zip file via fastboot.
I'm in search of firmware for the S4 running 4.3 or 4.4. I haven't gotten this phone yet but verizon is selling it through Walmart on prepaid. I know the firmware isn't gonna be the same as if it was on contract verizon. I have the S3 right now and it's prepaid. Many argued that there wasn't a NF5 firmware but turns out there is and i used it many times to fix soft bricks on the S3 using Odin. So I'm pretty sure the prepaid side of the S4 will have different firmware then one on contract verizon would have. So that being said, does anyone have 4.3,4.4 or even 5.0 firmware they can share that will work with Odin? Not sure if the S4 got the 5.0 update. Just assuming it did. Any help is appreciated!
Anyone? Please?
If no one can then someone at least tell me how it direct me to where I can make a tar or md5 firmware out of adb pulls of the system an stuff?
bjf189 said:
If no one can then someone at least tell me how it direct me to where I can make a tar or md5 firmware out of adb pulls of the system an stuff?
Click to expand...
Click to collapse
OK never mind. I need 5.0.1 firmware. Not 4.3 or 4.4. Any help would be great
I can't think of any reason as to why post paid firmware would be different than prepaid. You can use the phone for either.
And you're posting jn the wrong forum, which is probably why nobody is helping you. Because you didn't bother to read the rules before posting.
Try the general section or Android development section. Click the search button and type firmware. I'm sure you'll find it faster than it took you to make all these posts. Good luck
still no help
sob372 said:
I can't think of any reason as to why post paid firmware would be different than prepaid. You can use the phone for either.
And you're posting jn the wrong forum, which is probably why nobody is helping you. Because you didn't bother to read the rules before posting.
Try the general section or Android development section. Click the search button and type firmware. I'm sure you'll find it faster than it took you to make all these posts. Good luck
Click to expand...
Click to collapse
still no help
I think what sob372 was saying is the hardware in the phone is the same as the contract so you can just follow the SCH-I545 stuff and it will work.
being that I just got this same phone S4 prepaid used I'll be playing with it to root it, install safestrap and probably downgrade it from Lollipop to Kitkat. So I'll let you know if you don't find more here by searching and I'm sure there are relevant posts if you dig around a bit.
BTW the S4 PP does have a SIM slot.
droidzer1 said:
BTW the S4 PP does have a SIM slot.
Click to expand...
Click to collapse
It just seems really sketchy to do with the contract firmware. Like I get the feeling that if I flash the firmware from contract, I'll lose any cell phone service under prepaid. I just don't want to end up with a big paper weight. The modules could be different. With the S3 I had which was prepaid also. I used safestrap and superlite rom was the best one I got to work with the prepaid version. The system always kept crashing but it would load if I put it under stock an not a rom slot. I had to get the i535pp module to fix the Wi-Fi problem but if I had no service cause of the sim issue then I didn't want it. Also I'm not sure but I think there is no safe strap for the s4 running lollipop. I believe the forum said it would cause bootloops if you tried. Just like you need to deodex for xposed cause of the changes in art
droidzer1 said:
BTW the S4 PP does have a SIM slot.
Click to expand...
Click to collapse
If you can confirm all is in working order with the contract firmware (can't remember what the build is) with the prepaid phone, I'll give it a go.
Update
A member already tried the OC1 postpaid firmware on the prepaid. They said all works but the camera and charging don't work. So that's out of the question
I been looking around on the net and best I've come up with is backing up the firmware. I tried using flash fire to get back ups of every partition. Then I used Odin package creator to try an make a firmware file to use with Odin but when I tried it out in Odin, it stopped at data so I took out my personal data then it stopped at something with number 3 at the end. Can't recall what it was. So if anyone can test more on this to have any luck. Maybe then we can get the firmware out to people in case sammobile decides not to or takes another year to release it
I've been trying a different approach to getting a copy of the OH7 firmware. I've been attempting to use Fiddler4 + the Verizon Wireless Software Upgrade Assistant tool that comes on my phone (Verizon Prepaid Galaxy S4 model SCHI-545KPP) to get a download link to the original rom file... I can't get the bloody link to download with Fiddler or an internet browser, as i get a 403 forbidden error. I'll keep trying, maybe I can find the downloaded file in my temp files while attempting to recover my phone? It will take some time but I'll keep trying.
*update* So I located where the Verizon Wireless Software Upgrade Assistant stores its files (compressed and extracted). The location is C:\Users\[username]\AppData\Roaming\Verizon_AR .
I unfortionally didn't figure this out until after I royally soft bricked my phone. Right now I have a OF1 recovery installed on the phone, and the assistant keeps trying to install the OF1 firmware (and it fails). If anyone could check that folder for the OH7 firmware, or post a backup of the OH7 recovery, you'd be doing me a huge favor. I think we'll have the OH7 firmware after this one way or another.
*edit* This is 100% confirmed now. C:\Users\[username]\AppData\Roaming\Verizon_AR\SCH-I545_I545VRUGOF1_FACTORY\decrypt produced a zip file that is 100% identical to the OF1 firmware zips out there. This decrypt subfolder didn't appear until after the file was completely downloaded, and the Software Repair Assistant had started to try and flash the rom. This data is deleted after the phone completes flashing (or fails to flash). If you select "delete" after this information is downloaded, the encypted rom file is deleted and you must start all over again.
If someone could check that folder who has used the Verizon Wireless Software Upgrade Assistant to recover their phone, using the tool on your phone again and you'll get the decrypt folder... if you zip/rar that folder, we'll finally have the backup files we can post somewhere.
the PP phone uses the same firmware as the normal one that guy that tried it
did something wrong
just flash the OF1 tar via odin and be done with it
TheXev said:
*update* So I located where the Verizon Wireless Software Upgrade Assistant stores its files (compressed and extracted). The location is C:\Users\[username]\AppData\Roaming\Verizon_AR .
I unfortionally didn't figure this out until after I royally soft bricked my phone. Right now I have a OF1 recovery installed on the phone, and the assistant keeps trying to install the OF1 firmware (and it fails). If anyone could check that folder for the OH7 firmware, or post a backup of the OH7 recovery, you'd be doing me a huge favor. I think we'll have the OH7 firmware after this one way or another.
*edit* This is 100% confirmed now. C:\Users\[username]\AppData\Roaming\Verizon_AR\SCH-I545_I545VRUGOF1_FACTORY\decrypt produced a zip file that is 100% identical to the OF1 firmware zips out there. This decrypt subfolder didn't appear until after the file was completely downloaded, and the Software Repair Assistant had started to try and flash the rom. This data is deleted after the phone completes flashing (or fails to flash). If you select "delete" after this information is downloaded, the encypted rom file is deleted and you must start all over again.
If someone could check that folder who has used the Verizon Wireless Software Upgrade Assistant to recover their phone, using the tool on your phone again and you'll get the decrypt folder... if you zip/rar that folder, we'll finally have the backup files we can post somewhere.
Click to expand...
Click to collapse
I'm trying out your idea. If i can get the file them I'll upload it. If not, I'll still be able to at least send you a back up of the oh7 recovery. Mines all still stock. Id hate to get stuck with a paperweight until the correct firmware is released. That's why I'm careful lol. The firmware is downloading right now. It says it's a enc4 file though. Maybe just cause its downloading at the moment. I'll just wait an see an I'll let you know
Legitsu said:
the PP phone uses the same firmware as the normal one that guy that tried it
did something wrong
just flash the OF1 tar via odin and be done with it
Click to expand...
Click to collapse
A few people who used of1 on the pp version had issues. Not one came out with no issues far as i know. So I'd rather be safe then sorry. Not saying your incorrect but I'm just trying to play it safe and careful. Appreciate the input though
bjf189 said:
I'm trying out your idea. If i can get the file them I'll upload it. If not, I'll still be able to at least send you a back up of the oh7 recovery. Mines all still stock. Id hate to get stuck with a paperweight until the correct firmware is released. That's why I'm careful lol. The firmware is downloading right now. It says it's a enc4 file though. Maybe just cause its downloading at the moment. I'll just wait an see an I'll let you know
Click to expand...
Click to collapse
Yes, while it is downloading it will be a .enc4 file. Even after downloading it will stay like that, but when you got to actually flash the file, it will decrypt and the encrypted version will appear in that /decrypt folder.
TheXev said:
Yes, while it is downloading it will be a .enc4 file. Even after downloading it will stay like that, but when you got to actually flash the file, it will decrypt and the encrypted version will appear in that /decrypt folder.
Click to expand...
Click to collapse
so im confused. do i need the encrypted or decrypted file for it to work with odin? i tried changing the file to zip format and open it with winrar after it downloaded in the software but it came up as an unknown archive or damaged. so im not sure what im doing wrong but ill keep trying
UPDATE: i have tried getting the file through verizons handy tool and i did get the decrypted folder along with the unzip folder during it was finishing up repairing my s4. i just copied the file from the decrypted folder and extracted it during the repair. so now im using odin 3.10.7 and testing it out now to see if it will flash successfully. if all goes well, i will make new thread with the firmware link inside it so users dont need to scroll through pages to find the link. first anyone know a good or popular upload storage i can use to upload the firmware to for others to use? i tried uploading onto here but i keep getting a connection timeout
UPDATE 2: ive got it! i made the firmware of OH7! finally. you can go ahead and head over to this thread TheXev. use it and youll be back to stock
http://forum.xda-developers.com/gal...nt/firmware-release-galaxy-s4-i545pp-t3365371
bjf189 said:
so im confused. do i need the encrypted or decrypted file for it to work with odin? i tried changing the file to zip format and open it with winrar after it downloaded in the software but it came up as an unknown archive or damaged. so im not sure what im doing wrong but ill keep trying
UPDATE: i have tried getting the file through verizons handy tool and i did get the decrypted folder along with the unzip folder during it was finishing up repairing my s4. i just copied the file from the decrypted folder and extracted it during the repair. so now im using odin 3.10.7 and testing it out now to see if it will flash successfully. if all goes well, i will make new thread with the firmware link inside it so users dont need to scroll through pages to find the link. first anyone know a good or popular upload storage i can use to upload the firmware to for others to use? i tried uploading onto here but i keep getting a connection timeout
UPDATE 2: ive got it! i made the firmware of OH7! finally. you can go ahead and head over to this thread TheXev. use it and youll be back to stock
http://forum.xda-developers.com/gal...nt/firmware-release-galaxy-s4-i545pp-t3365371
Click to expand...
Click to collapse
Thank you so much. I was close to taking this phone back and not getting another simply because I really need a phone to replace my S3 for tethering soon. But if you got the firmware, I can flash it back to working order, and hopefully get some deodexed roms (that way I can install Xposed framework). Thanks again!
Hi all
Just want to say I've been using XDA for a very long time, back to the OG Droid days, and wanted to say thanks right off the bat to those who are more skilled than I and for the help posted.
I recently aquired a sch-I545. The phone is in excellent condition, the only issue was that it was missing the IMEI, it's on the phone sticker, just not software. The baseband is also unknown. I knew this when buying it, that's how I got it so cheap. I figured that the guy had tried to flash it, and just didn't want to own up to it.
However, I have hit a wall. I've tried flash a stock rom on it so that I could root it and gain access to the EFS folder and see if I could modify anything. When I did, even though there was an EFS folder there was nothing to modify. I then heard about flashing a modem.bin to see about correcting the baseband and possibly the IMEI. Though I was rooted I didn't have a custom recovery, as of yet. I went to install TWRP via Odin and it starts the NAND write and then Fails.
So at my wits end I took it to a local shop, hoping that they might have better experience with this and I got the phone back today, with the Software Update Failed screen. I asked what was up, and was told that since someone tried to flash it, they erased the IMEI and they couldn't correct it. Asked why they gave me the phone back with the screen and was told that they too tried to flash with ODIN and it failed.
Luckily I didn't have to pay anything, but I think they just borked things up to and didn't want to own up to it lol.
SO....here's my question.
Can I flash a stock, or rooted ROM to this puppy that already has an IMEI and Baseband, and then Modify the IMEI to the correct one that is stickered on the phone? If I can, what search parameters should I look for? And is there a particular version of ODIN I need to use?
If I can't flash a ROM that already has a baseband and IMEI, how can I go about correcting this issue if ODIN doesn't want to write a custom recovery?
Thanks
You'll need Odin software and the correct factory image for the phone. There are a couple different builds so make sure to get the right one. If it's an MDK device and has never taken an OTA you're in luck. It can get TWRP on it after following the process. If it's later than MDK no TWRP. Search here and you'll find a thread explaining how to do it all.
Is there any way to tell if it's MDK after I flash the correct factory image? I have no clue if the person before updated via OTA.