Hi everyone,
I recently stumbled upon Hakeem's thread, which details the necessary configurations to extend the battery life of the HD2 running Android. One of the key configurations is to use SetCPU to underclock the device from 1GHz to around 600MHz.
I really want to try it out, but my bf told me it might be risky. He said that since the CPU is now running at a lower clockspeed, it might lead to HD2 overheating if I were to run multiple applications (compared to the default, 1 GHz config). I'm no techie, so I really don't know if what he's saying is true.
Are there any risks associated with underclocking the HD2 using SetCPU? Thanks a bunch!
Sarah
rikou_demon said:
Hi everyone,
I recently stumbled upon Hakeem's thread, which details the necessary configurations to extend the battery life of the HD2 running Android. One of the key configurations is to use SetCPU to underclock the device from 1GHz to around 600MHz.
I really want to try it out, but my bf told me it might be risky. He said that since the CPU is now running at a lower clockspeed, it might lead to HD2 overheating if I were to run multiple applications (compared to the default, 1 GHz config). I'm no techie, so I really don't know if what he's saying is true.
Are there any risks associated with underclocking the HD2 using SetCPU? Thanks a bunch!
Sarah
Click to expand...
Click to collapse
I have used SETCPU on my device for 1 whole month, there is nothing bad happens and it is safe.
In addition, you can install this app "current widget" or put a SETCPU on your homescreen to track your device temperature. This is the safest way.
Cheers,hope this help...
As opposed to overclocking, underclocking shouldn't pose any risks. You are basicly running your CPU at a lower frequency than designed, so your device will be cooler to start with. Even when maxing your CPU load, by running a lot of apps, your CPU is operating under its designed capacity. It will therefore never get hotter than a stock HD2 running full load at 1Ghz.
Furthermore there are built in safeguards to prevent catastrophic overheating. So basicly its safe and you should have no issues. Except, maybe, insufficient CPU capacity when running a lot or a heavy app.
Hope this helps!
Sent from my HTC HD2
christarius said:
Except, maybe, insufficient CPU capacity when running a lot or a heavy app.
Click to expand...
Click to collapse
I wonder if this is what my bf was talking about.
But anyways, I'll go ahead and give it a try. Thanks you guys!
Sarah
rikou_demon said:
I really want to try it out, but my bf told me it might be risky. He said that since the CPU is now running at a lower clockspeed, it might lead to HD2 overheating if I were to run multiple applications (compared to the default, 1 GHz config). I'm no techie, so I really don't know if what he's saying is true
Click to expand...
Click to collapse
He's an idiot. If you make it faster, its generating more heat, if you pump up the voltage it makes more heat. There is no possible way for lowering it to cause it to run hotter.
If you are that concerned, create a profile in set CPUto lower CPU and use conservative when temp reaches a certain point.
Sent from my HTC HD2 using XDA App
FROM WHAT I READ that if you underclock to the wrong level you can damage things that needs a desired amout of cpu ...if not it can stop working i wll find my source and post it later
weird thread. lol you cant damage your hd2 cpu by underclocking or undervolting
rossl said:
weird thread. lol you cant damage your hd2 cpu by underclocking or undervolting
Click to expand...
Click to collapse
Agreed, just turn it back up before playing memory intensive games & apps.
You're all wrong and I dont mind saying wrong section! stick to the topic of "Development"!
Regards
Flashmore
My HD2 is locked to 245mhz - 400mhz when on a black screen (so locked.) When in use it fluctuates between 245 - 998mhz depending on usage.
had it this way for months. No ill affects and makes the battery last that little bit longer.
Related
What is it? Purpose? How do you do it? How does it optimize my phone?
Sent from my Hero using XDA App
Google is your friend. Search CPU OVERCLOCKING.
Sent from my HTC Hero using XDA App
It's something cool, you could use SetCPU or Overclock Widget, and it's like adding rocket-fuel to a campfire.
ddotpatel said:
Google is your friend. Search CPU OVERCLOCKING.
Sent from my HTC Hero using XDA App
Click to expand...
Click to collapse
the time it took you to be a smart ass you could have just said what it did.
i did a search for it and yet it wasnt informative enough. hence why i came here and asked.
Google want enough? Wow! Over clocking increases the clock speed of your cpu making it calculate faster.
Sent from my Hero using XDA App
silver2kgti said:
the time it took you to be a smart ass you could have just said what it did.
i did a search for it and yet it wasn't informative enough. hence why i came here and asked.
Click to expand...
Click to collapse
Alright, then I'm sorry Google couldn't answer your question. (Which is odd, since overclocking is kinda popular.)
Anyways, Overclocking means to "Make the CPU go faster than it was designed for". Some devices "like the hero" can jump from 518mhz to a stable 691mhz by overclocking, this increases the speed of the CPU so that programs and the OS can work faster.
But overclocking is about finding the highest speed, while having the stability to use it. Since it's no use to overclock, if it makes your phone unusable to use. (Force closes, phone freezing etc.)
Overclocking CAN harm your device, if you take a too high value. But if you stay inside a stable zone, there shouldn't be any harm to your device.
You can experience that the phone is getting a bit hot, or that the battery is emptied faster than normal.
Since the CPU drains so much power, there are settings that allow to set a different clock (how fast the device should go in mhz) when the phone is at sleep. So that it can run at a much lower frequency, when you don't use it.
ROM developers normally post ( 691/197 ) or something at their thread, the first number is the CPU speed when it's on and you're using it. And the other is when the phone is at sleep.
If there's anything other you want the answer to, ask it here.
But, please use Gooogle search Before posting anything.
Overclocking increases the clock speeds of a CPU. And as a result means it can do *things* faster.
Overclocking on a desktop PC tends to increase the voltages to overclock the device over this isn't really an option on a phone as it has limited battery life. So overclocking on a phone is normally done by software changes. When CPU makers make a CPU they can not be 100% accurate on the performance of that chip - in fact its very much the opposite, so after each chip is made it is tested and then given a clock speed and locked to that, overclocking breaks that and allows you to manually increase the clock, however overclocking capabilities will be different on every device.
If you take an example of an Intel Chip, a 2.66GHz Core-2-Duo, this is exactly the same chip as the 3.06GHz however when tested it wouldn't run as fast so Intel sell it at a stable clock speed.
Overclocking the hero shouldn't really have any implications for the device, however overclocks can reduce the life-time of a CPU (and any other hardware you might overclock). You shouldn't notice much extra heat from the device as the voltages being used are not changing.
Hope that cleared some of it up for you.
silver2kgti said:
the time it took you to be a smart ass you could have just said what it did.
i did a search for it and yet it wasnt informative enough. hence why i came here and asked.
Click to expand...
Click to collapse
Did you forget to press the search button?
Some of the top results from google:
Wikipedia
What is Overclocking?
What is overclocking?
What is overclocking?
Overclocking Guide
Really was that so hard?
I installed the webtop over hdmi mod on my Atrix and while testing it out, it got very warm in my hand. I opened the setcpu app and noticed that while overclocked to 1.3GHz, the CPU was running at 75C! I lowered it back down to the stock 1GHz and the temp slowly went down and settled at 63C.
It seems that while in webtop mode, the CPU is taxed at 100% all the time so I'm wondering if it's safe to stay overclocked when using webtop.
Everyone has different opinions of what is too hot around here.
IMO the cooler the better. IMI No Atrix should have a temp above 60c and I'm not even comfortable with above 50c either...
Sent from my MB860 using xda premium
I have experienced the same problem and worried that something may fry.... I have had mine overclocked at 1.45 using debian linux and all of a suddent he phone freezes and restarts.... Since it did it to me the second time I have kept my phone at 1Ghz... I am new at this so please don't beat me up too bad for being a noob... Just want to see if maybe undervolting it a little might help or hurt it?
Thanks in advance
Here are some tips I can offer
1.Try re-flashing your custom kernel and see if that fixes the web-top thing and over heating
Whenever the phone is plugged to the web-top it will naturally overheat so it's kinda expected remember now it's gotta work harder since its displaying on lap-dock or TV,but if you can cook an egg on it it might be too hot...lol
2.Set profile for temperature on setcpu so this way once you reach for example 100F your phone will clock down a little and so it might help the heat issue.You can set even more than one temp profile so this way when it reaches 96 it goes down a little then when it reaches 100 it will clock down a little more and such.
3.If that doesn't help,which in my situation it did.Flash a different kernel mayb it's just the one you're using that is causing funny stuff to happen.
Edit: not sure but i think undervolting helps battery but causes more heat,I myself don't undervolt I just created litterally a bunch of setcpu profiles for battery level,screen off,incall,charging,temp,and time and I'm getting 13 hour days at 1.3Ghz and temp profiles have been helping by clocking down when it's too hot therefore saving battery and drastic overheating.I dontlike my phone going anything over 104F it gets me paranoid,but that's just me.
I tried reflashing the kernel but it didn't change anything. I'm using Faux's 1.3GHz overclock kernel for Gingerbread (2.6.32.9). Is there something else I should be using?
sk8trix said:
Edit: not sure but i think undervolting helps battery but causes more heat,I myself don't undervolt I just created litterally a bunch of setcpu profiles for battery level,screen off,incall,charging,temp,and time and I'm getting 13 hour days at 1.3Ghz and temp profiles have been helping by clocking down when it's too hot therefore saving battery and drastic overheating.I dontlike my phone going anything over 104F it gets me paranoid,but that's just me.
Click to expand...
Click to collapse
Do what sktrix said in rest of his post.
I use the stopgap 1.0GHz kernel, and UV does lower temperatures. I would definitely try UV'ing a wee bit. You don't need to go crazy. I am using the following with great results for both temp and battery life:
-50
-50
-75
-75
-75
-100
-100
My setcpu profile clocks it back if I reach 60C, (I idle in the low to mid 30's). Under heavy load I reach around 52C max which is quite acceptable.
Now, granted I am not using Webtop, but the end result for UV should be the same. Lower temps and better battery life. You may also want to try just using 1.0GHz when on Webtop. The phone has more than enough power at this clock speed.
There is a bug with faux's kernel that causes the webtop to clock the phone at max speeds until restart.
Sent from my MB860 using xda premium
I know I'm straying from my correct forums here, however I have an LG Optimus 2X which like the Atrix, is a Tegra 2 CPU.
Our phones get VERY hot, I have had my CPU up to 86C before I decided to back off the stress test. CPUs are very good at handling high temperatures, and IMO you will see no ill effects from doing so, I am unsure of whether or not the Tegra 2 has thermal throttling/shut down, but in my experience they should be fine to around 80C.
The only issue I can forsee is the battery, batteries HATE high temperatures and it is awful for their life span, this is why your laptop batteries turn to crap after 1-2 years, even if low charge cycles, because they are always hot.
I would not be concerned about anything in the 70C realm, at all.
Alcapone263 said:
There is a bug with faux's kernel that causes the webtop to clock the phone at max speeds until restart.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Experienced this countless times. More with the latest 1.45Ghz, but it did happen on the previous release. When I dopped the mhz with setcpu, it wont scale but stay at max cpu. It even did it a few times without using the webtop.
g2tegg said:
Experienced this countless times. More with the latest 1.45Ghz, but it did happen on the previous release. When I dopped the mhz with setcpu, it wont scale but stay at max cpu. It even did it a few times without using the webtop.
Click to expand...
Click to collapse
So which overclocked kernel is best for webtop? I too have noticed where the CPU hangs at 100% at 1.45Ghz for a while when disconnected but it is always there when im in webtop mode.... How is Faux 1.3Ghz kernel with webtop?
ericemir said:
So which overclocked kernel is best for webtop? I too have noticed where the CPU hangs at 100% at 1.45Ghz for a while when disconnected but it is always there when im in webtop mode.... How is Faux 1.3Ghz kernel with webtop?
Click to expand...
Click to collapse
It will still hang at 1.3ghz, though it's a known bug. I just stick with the 1.0 enhanced, there's no noticeable real-world difference from going over 1.0ghz anyway, it's just a benchmark gimmick. Right now, the software that's out there is optimized to run on existing hardware w/o overclocks. I've run Shadowgun at 1.45ghz and didn't see any difference over the 1.0 enhanced.
Now, if we were trying to run games that were coded specifically or faster-paced chipsets then we'd need overclocking to catch up much like you would in the PC arena. That, however, is not happening in the cell phone market just yet.
treehumper said:
I just stick with the 1.0 enhanced, there's no noticeable real-world difference from going over 1.0ghz anyway, it's just a benchmark gimmick.
Click to expand...
Click to collapse
What's the advantage to running a custom kernel if you're not overclocking? Forgive me if this is a stupid question lol. Still a noob.
cjrhoades said:
What's the advantage to running a custom kernel if you're not overclocking? Forgive me if this is a stupid question lol. Still a noob.
Click to expand...
Click to collapse
Bump.
Anyone?
cjrhoades said:
Bump.
Anyone?
Click to expand...
Click to collapse
Read the history at the following:
http://forum.xda-developers.com/showpost.php?p=15387385&postcount=1
You will see a lot more optimization than just upping the clock speed. One of the reasons the 1.0GHz kernel works much better than the stock kernel. Also, the ability to undervolt saving battery life.
IMO there is no need for 1.3GHz or 1.45GHz in everyday use of a phone. The only benefit is for OC'ing bragging rights. Until we can control phone temperatures better, it's pointless to risk the substantial heat increase on ALL internal components for extended periods of time which results from much increased CPU temperatures.
CaelanT said:
Read the history at the following:
http://forum.xda-developers.com/showpost.php?p=15387385&postcount=1
You will see a lot more optimization than just upping the clock speed. One of the reasons the 1.0GHz kernel works much better than the stock kernel. Also, the ability to undervolt saving battery life.
IMO there is no need for 1.3GHz or 1.45GHz in everyday use of a phone. The only benefit is for OC'ing bragging rights. Until we can control phone temperatures better, it's pointless to risk the substantial heat increase on ALL internal components for extended periods of time which results from much increased CPU temperatures.
Click to expand...
Click to collapse
I see... guess that explains why the phone doesn't really feel any faster when it's overclocked. I'll flash the 1GHz kernel then.
Thanks for the info.
Not sure if this is the same with phones but normally a CPU should stay at 40C idle and 50C load. Maximum would be 60C while benching or something.
If it goes above that I would definitely underclock/undervolt.
cjrhoades said:
what's the advantage to running a custom kernel if you're not overclocking? Forgive me if this is a stupid question lol. Still a noob.
Click to expand...
Click to collapse
also has other fixes besides overclocking you can go read them in the kernel threads
So I overclocked my GSII to 1.6Ghz, and ran benchmarks and it was blazing fast. So what's the point of overclocking other than running benchmarks? I'd rather not have my processor running at 1.6Ghz all the time and draining battery power. I actually prefer underclocking to save power. So my question is - how else can I benefit from overclocking my device?
yo whyd you put this in the dev section? get flame suit on brotha.
miui+siyah = beast
Well its obviously to have your device performance better. Honestly it's not really practical to run higher than 1.2 ghz though.
You also put this in the wrong section. Prepare your anus.
NJGSII said:
Well its obviously to have your device performance better. Honestly it's not really practical to run higher than 1.2 ghz though.
Click to expand...
Click to collapse
But in what ways other than benchmarks? Am I really going to notice a difference if I kick it up to 1.4 or 1.6Ghz when browsing the web or playing Angry birds or something?
where is the download link and what does it do?
Some serious development going on here.. [\sarcasm\]
OP even if you crank it up to 1.6GHz, unless your isolating that step, your phones not using that clock speed unless your doing sh*t on your phone. It will increase how fast apps or menu's open navagating throughout the phone. Your making the CPU think faster so your phone ends up doing its tasks little and big ...faster
But dude.. Googling the benefits of OC could have giving you an answer ..and FASTER. Lol
Sent from my SAMSUNG-SGH-I777 using xda premium
The benefits of overclocking you ask? Let me tell you just a few.
1. For every overclocked phone, one dollar is anonymously donated to poor and starving children, families, and college students across the world [citation needed].
2. Overclocking your phone emits a low frequency gamma wave inhibitor which in some cases, tested by prestigious scientists, has proven to protect you from harmful UV rays from the sun, nuclear fallout, increases neural synapse action in the brain, lowers bad cholesterol AND blood pressure, increases lifespan up to a minimum of three years, and is a natural antimicrobial agent that also interacts with your white blood cells to not only increase output and strength, but also breaks down the DNA rebuilding process by inhibiting protein synthesis in a wide variety of foreign microbes in your body.
3. Overclocking has been used to successfully treat sever depression, obesity, dementia, and AIDS.
4. With an overclocked phone, it's been observed waiting times for and inside elevators is severely decreased.
5. Bad driver? Accident prone? Overclocking has been shown to heighten driver awareness and overall skill.
6. It speeds up your phone on a day to day basis, with some, but not terribly noticeable battery drain [citation needed].
Sent from my SAMSUNG-SGH-I777 using xda premium
Overclocking is entertaining. But I'm running the Unnamed rom on my device and have it UNDER clocked to 800mhz. Crazy good battery life and zero lag.
Overclocking is pointless as it runs everything great already. I'm waiting to overclock until my phone is outdated and my contracts about to expire.
While its rather easy to do there really isn't any benefit to overclocking the SGSII. Yes, it'll run a little faster and your Angry Birds might run smoother (really? ), but it'll also mean a little more heat and more battery drain all to accomplish something you really won't be able to get any real advantage from.
another reason to overclock would be bragging rights
DJSLINKARD said:
another reason to overclock would be bragging rights
Click to expand...
Click to collapse
Only reason in my opinion lol...
Sent from my Galaxy S II (I777) - 1.4Ghz
For this phone, it's pretty much useless. The phone runs great without the faster clock speeds.
On the other hand, if it was a snapdragon processor, you'd need 1.5 GHz just to be marketable next to this phone (and 1.8GHz to perform as well in day to day usage.)
One reason could be... Because we can!
Sent from my SAMSUNG-SGH-I777 using xda premium
highaltitude said:
One reason could be... Because we can!
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
haha ... love it!
Sent from my SAMSUNG-SGH-I777 using xda premium
MattMJB0188 said:
So I overclocked my GSII to 1.6Ghz, and ran benchmarks and it was blazing fast. So what's the point of overclocking other than running benchmarks? I'd rather not have my processor running at 1.6Ghz all the time and draining battery power. I actually prefer underclocking to save power. So my question is - how else can I benefit from overclocking my device?
Click to expand...
Click to collapse
Most people overclock for a smoother/snappier experience. I notice that roughly 20% increase in scrolling/tabbing around. Also you can think of it like this:
1.4ghz will finish tasks faster then 1.2, that way taking less battery. You could also undervolt that 1.4 to 1.2 (1275mV), so your finishing tasks quicker while draining no more then stock.
I switch between 1.4 and 1.0 every other day it seems. 2 months later, still looking for the right one for me. 1.6 should only be for benchmarking imo, epeen.
cwc3 said:
1.4ghz will finish tasks faster then 1.2, that way taking less battery. You could also undervolt that 1.4 to 1.2 (1275mV), so your finishing tasks quicker while draining no more then stock..
Click to expand...
Click to collapse
It's not that simple.
There are dozens of bottlenecks in these devices (and any other computer), and 9 times out of 10, it's NOT the processor. Persistant storage, RAM, bus speeds, etc - all those things will ensure that a 10% bump in processor speed will NOT give you a 10% decrease in run time for a given typical application. In many cases, you'll see no speed increase at all, as it takes the same amount of time to flush to persistant storage no matter how fast the write cache fills.
I'm not suggesting that a person shouldn't O/C, but don't be surprised when going from 1200MHz to 1400MHz makes no visible difference other than the battery draining slightly quicker.
I know someone is going to respond that the processor will bump back down to a slower speed and therefore it runs at the higher speed for less time, etc. However, unless you have the governor set to poll for usage so often that the governer is driving your clocks up to max, it's not going to poll often enough to make much (if any) difference.
Think of it this way: We both own a mustang, but mine is a V6 at 220HP and yours is a V8 at 300HP. In theory, yours can accel faster and maintain a higher top speed. In reality, neither one of us can go faster than the car in front of us (but you'll burn more gas doing it.) (Of course, you'll have more fun in yours.)
I hope this helps with a very common misconception.
Take care
Gary
garyd9 said:
It's not that simple.
There are dozens of bottlenecks in these devices (and any other computer), and 9 times out of 10, it's NOT the processor. Persistant storage, RAM, bus speeds, etc - all those things will ensure that a 10% bump in processor speed will NOT give you a 10% decrease in run time for a given typical application.
Click to expand...
Click to collapse
Very true. Also I am guessing in gaming, that OC will drain your battery quite well.
Consider I mostly do Web browsing on my phone (I need a tablet), 1.4 is a much better browser experience imo. Worth the 100mV.
garyd9 said:
Think of it this way: We both own a mustang, but mine is a V6 at 220HP and yours is a V8 at 300HP. In theory, yours can accel faster and maintain a higher top speed. In reality, neither one of us can go faster than the car in front of us (but you'll burn more gas doing it.) (Of course, you'll have more fun in yours.)
I hope this helps with a very common misconception.
Click to expand...
Click to collapse
Excellent analogy.
Sent from my Galaxy SII
While for now Overclocking is mainly just done for fun im hoping that closer to my upgrade time that i will be overclocking for more actical reasons. That is the way it was for my Captivate. I enjoy trying to push my hardware to its limits. Ive gotten my GSII so far to a stable 1700mhz but i think i can squeak out a little more speed especially with the gpu down clocked a little. I run it at 1400MHZ Though with the gpu forced at 267mhz.
Hey guys,
I have just installed OmegaRom by Team Cooper and what a Rom it is!!! Amazing is an understatement.
Okay so with there new Rom v2, it has an OC kernal built in and it does work...BUT I need to know how to OC the thing safely and squeezing as much performance as possible!
I have it at 825 and min 806 mhz, scaler is performance.
What settings would you pro's recommened?
Thanks!
Edit 1- I am using SetCPU to OC.
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
an0nym0us_ said:
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
Click to expand...
Click to collapse
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
davalav said:
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
Click to expand...
Click to collapse
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
CPU Tuner
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
sreesh87 said:
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
Click to expand...
Click to collapse
I have OCed it to 902 mhz..
Sent from my GT-S5830 using XDA App
Thanks for the comments guys... Gives me a rough estimate on its limits.
So far I have been running 844mhz performance for a while, since I created this thread and the battery has remained at 82%!
I have benched using AnTuTu twice and have excellent read and write speeds, compared to other benchies I have seen, OmegaRom is the best Rom I have ever used!
Cheers,
i tried cpufrills and its the best for me
I don't Think U mustuse over clocking,even my setting was min245 max 902,the effect just draining more battery,and if using to much can damaging ur prosessor
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Rushyang said:
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Click to expand...
Click to collapse
Don't worry! Like I said, I have experience O/C'ing processors etc and I know how bad the effects can be! I am not going for a massive overclock at all. Just a tiny bump in the speed. At the moment, I am running 825mhz and already the speed has improved dramatically. I may go a little further but 902mhz is a bit mental for my liking.
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
SetCPU is free for XDA members and it's the best one ever...period
http://forum.xda-developers.com/showthread.php?t=505419
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
setCPU is free to if you download it from the forum
http://www.tomsguide.com/us/overclock-android-device,review-1762.html#xtor=RSS-998
Opinions from people who really know? I can't imagine that overclocking increases battery life.
It doesn't. At least from my understanding. In fact as I understand it running at higher clock speeds would decrease your battery life no? I usually under clock, so...
Sent from my SGH-I777 using xda premium
The theory is that overclocking allows you to complete processes quicker, which in turn allows the processor to go back to a idle/deep sleep faster. In practice it doesn't really work that way though.
ryude said:
The theory is that overclocking allows you to complete processes quicker, which in turn allows the processor to go back to a idle/deep sleep faster. In practice it doesn't really work that way though.
Click to expand...
Click to collapse
doesn't the increase in voltage also come into effect?
They did talk a little about undervolting to increase battery life. Personally I don't worry about it. I'm not using my phone to sort out heavy algorithims at the moment, so running how it does is fast enough for what I use it at. Just found the article interesting.
K Rich said:
doesn't the increase in voltage also come into effect?
Click to expand...
Click to collapse
They say the undervolting on lower clocks should balance out the higher voltage on overclocks.
stalked_r/t said:
They did talk a little about undervolting to increase battery life. Personally I don't worry about it. I'm not using my phone to sort out heavy algorithims at the moment, so running how it does is fast enough for what I use it at. Just found the article interesting.
Click to expand...
Click to collapse
Undervolting rarely makes a difference on mobile SoC's, but on the desktop/laptop CPUs you can really save a ton of power with undervolting and underclocking.
Why to overclock and understand it?
Here is a good reason to know what you are doing..
and the battery avg's lasting at least through the day, but most of the time, I have a charger near me...
EDITED: because it won't accept my screenshots HTML Probably cause I have n00b status on this account name.
AnTuTu Benchmark v.2.8
Total Score: 7446
RAM: 1201
CPU Int: 2264
CPU Float: 1767
2D: 295
3D: 1148
Database: 450
SD W 11.8MB 118
SD R >50MB 203
1600mhz
2012-05-23 18:17
You can view this SN here: Screenshot
Fluxi Kernel/My own OOM settings/AOKP/my own XXTweaker settings
The article says its not the actual overclocking that is saving battery life. When you put SetCPU on your phone not only can you overlock but you can underclock and set different voltages. I'm not 100% sure how the voltages play into it but you can set the processor to run at really low speeds during certain acts ei. when the screen is off, or any other time you don't necessarily need alot of power. That's and I changed all the voltages (I got them from a post where the guy knew what he was doing and tested them). I get almost 2 days moderate browsing, apps and text. If I talk alot or use my hotspot I only get 1.5 days. It is a little time consuming to get everything just right but when you do you really see it.
icyhandlz said:
The article says its not the actual overclocking that is saving battery life. When you put SetCPU on your phone not only can you overlock but you can underclock and set different voltages.
Click to expand...
Click to collapse
This isn't a SetCpu feature there are other programs that can do this as well. It just so happens SetCpu has it built into the program. I bought SetCpu back in my Atrix days and loved it so it does work great for a simple tuning program.
Sent from my SGH-I777 using Tapatalk 2
Many of the kernels these days have their own tweaks and mod apps as well
Sent from my SGII AOKP Fluxi i777 running Beastmode OOM using Xparent Sky Blue Tapatalk 2
I'm running a kernerl and a custom ROM that allows me to underclock and overclock.
I tried it out both ways and the battery lasted for almost the same amount as on the stock option. As I tend to play games a lot on my phone, the underclocking ran into some issues with stuttering and sometimes force close of a couple of games.
Personally, I've never been a big fan of either .