[Q] Flashing JI6 - Vibrant Q&A, Help & Troubleshooting

Is it ok to flash w/o the PIT from JI4 to JI6 to prevent a wipe?
All of my current system MODs are in my signature.
Thanks in advance

Can anybody advise on this?
Sent from my SGH-T959 using XDA App

I'm not to sure of you original question, id actually like to know the answer also. I usually do adb pull /sdcard & push it back in after. Only thigh is you would of course have to set up everything again.

Related

Vibrant stuck at Vibrant screen, please read (not caused by any OTAs)

I tried upgrading my girlfriend's Vibrant to one of the new 2.2 ROMs and she didn't like it, so I disabled voodoo, booted into recovery and attempted to restore the backup I made in nandroid. After 30 minutes of hanging on 'restoring data', I gave up and tried to reboot. Phone is now stuck in the vibrant logo and will not boot into recovery. Tried pulling the battery and it just reboots back to the Vibrant logo.
I know there is a way to fix this with something called Odin? (not sure if that's the name). My only problem is I don't want to delete any of her non-restorable stuff. Is there any way to fix this without deleting anything that can't be restored? Also, any idea why the nandroid backup didn't work? I'm afraid that even if I can get back into recovery, the restore will just freeze again.
I did notice when it was wiping to install the ROM originally, it also froze on deleting data, but a reboot fixed that. So maybe a reboot will fix that too but I'm not sure. Any help?
do you reboot when you have disabled voodoo and hear linda say 'convertion successful' ? sometime it will not work proper if you disable and flash something without reboot
Sent from my SGH-T959 using XDA App
Yeah I used the flashable disable zip thru rom manager.
velocity92c said:
Yeah I used the flashable disable zip thru rom manager.
Click to expand...
Click to collapse
*edit* it is because kernel i think
BTW post wrong section..
Sent from my SGH-T959 using XDA App
I made this same mistake the first time I flashed. What it is, its that nandroid does not backup the kernel, so you have to flash one with the same version of android. At this point you will have to use odin to do it then once you have you can do a nandroid restore.
Sent from my SGH-T959 using XDA App
o i'v just got what your problem is! you should flash a 2.1kernel before nand restore. because it will not restore your kernel
Sent from my SGH-T959 using XDA App
oiiboy said:
I made this same mistake the first time I flashed. What it is, its that nandroid does not backup the kernel, so you have to flash one with the same version of android. At this point you will have to use odin to do it then once you have you can do a nandroid restore.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I think maybe he can get into recovery and flash a new 2.1 kernel. Will this work?
Sent from my SGH-T959 using XDA App
Post in the right forum and you will get the answer to how to fix it.
Moved to Q&A as not development
look at the bright side... at least ur Vibrant isnt stuck on the Captivate screen....
I'm sorry about posting in the wrong forum, honest mistake but it won't happen again. Can someone exolain to me what I need to do, in order, to fix this? I need to use odin, then flash a 2.1 kernel, then run nandroid restore? Which 2.1 kernel should I use?

Best method for rooting EA28?

Well, I had been planning on waiting for the official release of 2.2 before rooting. Now that it's apparent that's a lost cause, and given that I have a weeke of spring break to fool with the phone, what's the best method for rooting a stock EA28 with the intention of then going on to try out a froyo version? From the sticky up top, I would guess its http://forum.xda-developers.com/showthread.php?t=913470 . Has anything better come along? Ease of reverting to stock is important to me too.
That's the best way I'm aware of.
I know the one-click root method still works (I rooted EA28 that way), but you need to make changes to one of the .bat files before it does work. You also have to restart the phone in the middle of the process because it gets hung up. This method from adrynalyne is way better.
Once you are rooted and ready to jump into the world of Froyo ROMs, you will want to flash this updated CWR package from JT. It has been modified to better work with the way the system is set up in Froyo.
http://forum.xda-developers.com/showthread.php?t=942021
Don't be alarmed that this new CWR mentions Voodoo when you're in recovery. It's set up to work with both Voodoo and non-Voodoo kernels. Also, it doesn't accurately report out the correct state of Voodoo if you are using it. You have to use other methods to determine if Voodoo has been enabled.
Once I root, do I have to flash all the EB01 zips to use SuperClean 2.9? It appears as if I do, problem is, I use a Mac at home and would have to use a windows parallel program to run Odin. I'd like to avoid that, if possible.
enserio said:
Once I root, do I have to flash all the EB01 zips to use SuperClean 2.9? It appears as if I do, problem is, I use a Mac at home and would have to use a windows parallel program to run Odin. I'd like to avoid that, if possible.
Click to expand...
Click to collapse
What do you mean by "all the EB01 zips?" Where are these zips located?
I have seen many people say Heimdall works with Macs. I would suggest looking that up and how to use it, as I have only used Odin on PCs.
the EB01modem.tar, and EB01voodoo.zips, specifically. Seems as if SC2.9 is on either EB01 or EB16.
If u use heimdall, and use a prerooted eb01 you alleviate the need to bother rooting ea28 beforehand.... heimdall doesn't care if you're rooted... it pushes whatever you tell it to the phone....be careful tho....it has no training wheels... if you try to get ahead of yourself and not read up thoroughly, so you know what is pieces to put in which blank....you could goof your phone up....at least temporarily
Sent from my SCH-I500 using XDA Premium App
I d/l'd Heim last night, and it definitely looked like it required some reading beforehand. That's nice that it doesn't require root, but I'd like her phone to be rooted, either way. Seems there would be more advantages.
If you download the EB01 that adryn posted awhile back...the one for Odin... its pre-rooted....as are most roms...it's a big tar file... you can extract it with a tar extractor program, and it contains all the individual bin files that you use with heimdall for flashing....
Sent from my SCH-I500 using XDA Premium App
agsded said:
If you download the EB01 that adryn posted awhile back...the one for Odin... its pre-rooted....as are most roms...it's a big tar file... you can extract it with a tar extractor program, and it contains all the individual bin files that you use with heimdall for flashing....
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
I appreciate the response. Definitely gonna read up on heim and unzip that tar. Thanks
Sent from my Desire HD using XDA App
I love how elegant heimdall is....it gives you options.....like if you know you have a clean functioning recovery....then you don't add recovery.bin....if you have a hacked param file and a custom boot logo, you can leave the param field blank to preserve it. It.lets you fix only what's broken, without going back to bone stock on everything. I love of.
Sent from my SCH-I500 using XDA Premium App

[Q] Please help

Hi guys, I really need help restoring my phone back to working order. I made the dumb mistake of flashing a stock 2.2 kernel while using the bionix 1.3.1 rom. Now my phone is stuck on the team whiskey logo loop. I can not get into recovery using the volume plus power button anymore. It sends me into samsung recovery 2e. How do I go about fixing this problem? Any help would be appreciated.
Hmmm...might use Odin to flash the kernel from the Bionix.zip? I'm guessing you didn't disable lagfix before flashing the stock kernel. Shouldn't be a big deal if that's the case.
Edit: That's of course assuming you can get into Download Mode.
Edit 2: Not sure how easily you can flash only a kernel using Odin. Might try Heimdall if that doesn't work?
Agreed! Whats the kernel you tried to flash? Link maybe? It really shouldnt be any problem maybe it just needed to sit. In either case it sounds like the update.zip should still be there. Try reinstall:update see if that werks. Good luck!
I just realized what exactly I did that caused everything to mess up. I wiped the cache partition which erased my data including the update.zip. Can anyone provide the 3 files I need to return my phone back to stock condition using Odin. I found the thread but the links did not work anymore.
Sent from my LG-P999 using XDA App
waiaung1 said:
I just realized what exactly I did that caused everything to mess up. I wiped the cache partition which erased my data including the update.zip. Can anyone provide the 3 files I need to return my phone back to stock condition using Odin. I found the thread but the links did not work anymore.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Do you still have the Clockwork Recovery update.zip on your PC?
inconceeeivable said:
Do you still have the Clockwork Recovery update.zip on your PC?
Click to expand...
Click to collapse
Unfortunately I don't because I used ryan's oneclicklagfix as the method of rooting so I never had the update.zip on my computer. I been looking into restoring it back to factory everything but the links for the baseband, kernels, etc are not working. Do you know any working links?
I believe everything you need should be able to be found in the guide:
http://forum.xda-developers.com/showthread.php?t=849028
Good luck!
Thanks everyone for the help.
Sent from my LG-P999 using XDA App

Simply stock installation help

Ok so I tried to install the simply stock 2.3.5 yesterday and when it was going through I got some ladies voice who kept repeating the same line over and over. 'converting cache partition. Not enough space on partition' and kept boot looping that over and over. Could not do anything with it after that except DL mode and odin back to stock. Could some one please take a look at this rom and give me some instructions for it because the ones that were in the thread weren't all that specific. Also could someone give me the best root for this phone because the one I used may have been the cause.
Also there is a fixer file for this rom that apparently addresses some problems it has... How would I go about installing that zip?
Sent from my SGH-T959 using XDA App
Bumb
Has anyone ever even used this rom before? -.-
Sent from my SGH-T959 using XDA App

[Q] Fascinate all messed up

Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
riom4 said:
Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
Click to expand...
Click to collapse
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
AdelosMeansUnknown said:
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
Click to expand...
Click to collapse
I've already tryed odin and uing the pit it boots but has tons of fcs and errors
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
mezster said:
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
hey if you dont mind later could you link me to the 2.1 pit i think that i can find it but just in case. thanks for the advice i will post with results
You should definitely take a look at DROIDSTYLES GUIDE. Its in the General section.
Sent from my GT-I9300 using xda app-developers app
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
mezster said:
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Ok im pushing now using your 2.2.1 pit i guess if this doesn't work i could try heimdall but i have never used it before and am skeptical to so wish my luck if this doesn't work ill report back
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
mezster said:
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Never mind I read your post wrong.
Sent from my SCH-I500 using xda premium
riom4 said:
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Click to expand...
Click to collapse
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
riom4 said:
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
Click to expand...
Click to collapse
Fingers crossed
Sent from my SCH-I500 using xda premium
mezster said:
Fingers crossed
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
nope nothing worked trying to wipe everything but i went to wipe /system but it said I couldn't because it wasn't able to unmount it so im going to wipe every thing and do an old nan-droid and see if i can get it to work. otherwise any ideas???
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
mezster said:
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
ill give it a shot later to tired to think now so yea.... stay tuned for an adventure
ok so I made some progress I got cm 7.1 to boot up okay but in settings>storage and under internal storage it says total space 0.00b and available space 0.00b so what do i do?
Can you tell us exactly what steps you're using when you use Odin? I noticed the guide you linked to in the OP was a really old sticky. Droidstyle's Guide is the only one that is currently up to date. It doesn't mean you've done anything wrong with Odin, I just want to make sure you have the files in all the right places and the correct check boxes checked.
Please post questions in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Categories

Resources