This new Turial is not from me credits go to tot31
I'm writing the how to my own way, hope this will more helpful..
How To : App2sd on Xperia X10i mini
Pre Installation.
I'm assuming that you have just fresh install 2.1/1.6 firmware and root your phone before you start the procedure. This is how I did with my phone.
1. Reinstall 2.1 firmware by using Sony Ericsson Update Service.
2. Root the phone by using SuperOneClick ( http://d01.megashares.com/dl/1xcuTic/Super...4-ShortFuse.zip ). More info on SuperOneClick, go here -> http://forum.xda-developers.com/showthread.php?t=803682
Note : Please disable any anti virus especially Kaspersky as it will give false virus alarm and will delete one of the file.
Step 1 : Preparing your micro SD Card.
Please refer to this link ( http://forum.xda-developers.com/wiki/index...rd_partitioning ) on how to prepare your micro sd card. For better performance I would advise that you use a Class 10 card instead of the original card that comes with the phone because the card is only Class 2 card. For more infomation on speed class rating of sd card please go here -> http://en.wikipedia.org/wiki/Secure_Digital
An excerpt taken from wikipedia :-
The following are the ratings of some currently available cards:
* Class 0 - These cards do not specify performance, which includes all legacy cards prior to class specifications.
* Class 2 - Minimum of 2 MB/s performance. Lowest speed for SDHC cards.
* Class 4 - Minimum of 4 MB/s performance.
* Class 6 - Minimum of 6 MB/s performance.
* Class 10 - Minimum of 10 MB/s performance.
Note : The recommended maximum size of ext2 partition is 1.4GB. I've tried 3GB before and ended up with unstable system and eventually crash the phone. So if you're really greedy since you've bought a 16GB or 32GB card to partition the ext2 more than the recommended size and if your phone is unstable, you've been warn.
Step 2 : Download the related files.
1. App2sd : see attachment
2. adb shell : see attachment
Step 3 : Enabling USB Debugging mode on you phone.
Go to Settings -> Applications -> Development -> USB Debugging (check this option).
Step 4 : Installing App2sd.
Create a folder name adb in your pc and extract all the files from adb.zip into this folder.
Connect your phone to your pc and mount the sd card. Extract all the file from app2sd2.1.zip to the root of your sd card. Make sure to unmount the sd card before continue the next step.
In your pc open up a dos terminal box by typing cmd in the Search programs and files box.
Type
cd /adb
then type
adb shell
then type
sh /sdcard/app2sd.sh
you'll be presented by this screen...
+________________________________+
|********************************|
|*Welcome To wolfilein's App2sd *|
|*installing script *|
|********************************|
+--------------------------------+
~this version should be go on any device ~
+___________________+
|********************|
|* Menu *|
|* *|
|*[0] install app2sd*|
|*[1] remove app2sd *|
|*[2] exit *|
|********************|
+--------------------+
[0]
now just press the enter key & wait.
Important : Make sure to set your phone screen timeout to the max because Superuser will ask for your permission to allow this script to run. If your screen goes blank, you can't see this prompt and the installation will fail.
after a while you'll get this..
busybox is /system/bin/busybox
rm failed for /etc/mount_sd.sh, No such file or directory
+________________________________+
|********************************|
| finished going reboot now |
|********************************|
+--------------------------------+
Don't worry, actually it does not fail. I also got the same message and I also thought it failed but when install all the apps and check using Minitool Partition Wizard and Linux Reader for windows, all my applications are installed into my card (see my previous post with screenshot).
The Explanation
If you look through the app2sd.sh script, command rm /etc/mount_sd.sh means remove/delete the mount_sd.sh file from /etc folder, since that file does not exist in the fresh install phone, it gives this error message but continue with other commands..
rm /etc/mount_sd.sh
mv /system/bin/sh /system/bin/sh_bak
cat /sdcard/sh.sh > /system/bin/sh
chmod 777 /system/bin/sh
busybox cp /sdcard/mount_sd.sh /etc/mount_sd.sh
echo "
+________________________________+
|********************************|
| finished going reboot now |
|********************************|
+--------------------------------+
"
sleep 1
reboot
Finally after a reboot, your phone is ready with app2sd. From now on when you install any applications it will save into your sd card.
Disclaimer : Do this at your own risk. I will not responsible if any injuries or damage occur to you or your phone
wolfilein said:
/!\Warning this is for testing only/!\
¯¯ ¯¯
here is the script that "should work on the x10 minni"
i hadn't one so i can't say if it works
install is verry easy just
first make a second ext2 fomratted patition on the sdcard
extract the zip in the root of your sd-card
open an adb shell
and type in
sh /sdcard/app2sd.sh
then press just enter and app2sd will be installed
yout phone will reboot and then say me if it give errors
wolfilein
Click to expand...
Click to collapse
it says the folder do not exist
when said it this??
does the actually work?
i have an idea
can anyone of you guys ceck out wat habens if you add a bootscript to
/system/drm/DxDrm/init_drm.rc
/system/etc/hw_config.sh
anyone check this please
just a question.... do it "should work on the x10 minni PRO" ?? ( device with phisycal qwerty) ?
Sorry for my bad english !!
init.rc
what if i enter contents of drm.sh to init.rc?
check please this out!!
in the init.rc it seems the pregram must be a service
wolfilein said:
i have an idea
can anyone of you guys ceck out wat habens if you add a bootscript to
/system/drm/DxDrm/init_drm.rc
/system/etc/hw_config.sh
anyone check this please
Click to expand...
Click to collapse
init.rc
i'm not comfy editing init.rc.
I'm gonna try Autostart application from market first.
are you ignoring me ??
and you the autostartapp can't start before it's loaded on boot that means that you must first load the apps
hwconfig.sh
there is no hwconfig.sh in etc folder.
2 thing create one
and check if it excuted
and
check this file
/system/drm/DxDrm/init_drm.rc
wolfilein said:
2 thing create one
and check if it excuted
and
check this file
/system/drm/DxDrm/init_drm.rc
Click to expand...
Click to collapse
added code to init_drm.rc
did not work.
trying hw_config.sh
i will try to edit the init.rc
if i succes i will say it
no luck with hw_config.sh
so ive edit my script and i will upload it now on both
x10 an x10 minni this script should work on every android phone
so now your script is good also for x10 mini pro ??
simple way apps2sd
First, you have to make two partitions on your sdcard - Fat32 and ext2 (ext3)
Second, Mount ext2(ext3) on your device
Third, ln -s /system/app/xxx.apk \sdcard\ ext partition\ way you want\xxx.apk
Caution - never try to remove sdcard after this operation - very dangerious for the health of your device.
your way is not so good
and yes it !should! work now buti cannot test it
garbage
MasterKira said:
so now your script is good also for x10 mini pro ??
Click to expand...
Click to collapse
not really, this time it froze my phone on bootup at the SE logo.
I fear i might have to reflash n lose all my settings!
Related
I have an updated Rogers Xperia X10 with the Android 2.1-update 1 on it. I was wondering how I can get App2SD on my phone. I am generally happy with the firmware but would like to be able to add App2SD. Any help would be appreciated.
http://forum.xda-developers.com/showthread.php?t=800555
So I will need to root my phone first then?
..........
wolfilein said:
How To : App2sd on Xperia X10i
Pre Installation.
Root the phone by using z4root ( http://forum.xda-developers.com/showthread.php?t=833953 )
Step 1 : Preparing your micro SD Card.
Please refer to this link ( http://forum.xda-developers.com/wiki/index...rd_partitioning ) on how to prepare your micro sd card.
For better performance I would advise that you use a Class 10 card instead of the original card that comes with the phone because the card is only Class 2 card. For more infomation on speed class rating of sd card please go here -> http://en.wikipedia.org/wiki/Secure_Digital
An excerpt taken from wikipedia :-
The following are the ratings of some currently available cards:
* Class 0 - These cards do not specify performance, which includes all legacy cards prior to class specifications.
* Class 2 - Minimum of 2 MB/s performance. Lowest speed for SDHC cards.
* Class 4 - Minimum of 4 MB/s performance.
* Class 6 - Minimum of 6 MB/s performance.
* Class 10 - Minimum of 10 MB/s performance.
Note : The recommended maximum size of ext2 partition is 1.4GB. I've tried 3GB before and ended up with unstable system and eventually crash the phone. So if you're really greedy since you've bought a 16GB or 32GB card to partition the ext2 more than the recommended size and if your phone is unstable, you've been warn but normaly 1.4 GB are enough
Step 2 : Download the related files.
1. App2sd : see attachment
2. adb shell : see attachment
Step 3 : Enabling USB Debugging mode on you phone.
Go to Settings -> Applications -> Development -> USB Debugging (check this option).
Step 4 : Installing App2sd.
Create a folder name adb in your pc and extract all the files from adb.zip into this folder.
Connect your phone to your pc and mount the sd card. Extract all the file from app2sd2.1.zip to the root of your sd card. Make sure to unmount the sd card before continue the next step.
In your pc open up a dos terminal box by typing cmd in the Search programs and files box.
Type
cd /adb
then type
adb shell
then type
sh /sdcard/app2sd.sh
you'll be presented by this screen...
+________________________________+
|********************************|
|*Welcome To wolfilein's App2sd *|
|*installing script *|
|********************************|
+------------------------------------------+
~this version should be go on any device ~
+___________________+
|********************|
|* Menu *|
|* *|
|*[0] install app2sd *|
|* *|
|*[2] exit *|
|********************|
+-------------------------+
[0]
now just press the enter key & wait.
Important : Make sure to set your phone screen timeout to the max because Superuser will ask for your permission to allow this script to run. If your screen goes blank, you can't see this prompt and the installation will fail.
after a while you'll get this..
busybox is /system/bin/busybox
rm failed for /etc/mount_sd.sh, No such file or directory
+________________________________+
|********************************|
| finished going reboot now |
|********************************|
+-----------------------------------------+
the both messages above doesn't mean that your installation has failed
Finally after a reboot, your phone is ready with app2sd. From now on when you install any applications it will save into your sd card.
Disclaimer : Do this at your own risk. I will not responsible if any injuries or damage occur to you or your phone
Click to expand...
Click to collapse
I'm sorry it took so long, I got lots of stuff to deal with. Good things are worth waiting for (i heard)
First off: You are responsible for any of your actions! Changes that are needed to boot Ubuntu on your folio will void your warranty!
Special Thanks goes to DerArtem for posting his Kernels, Weeds2000 for eMail support, topogigi for wifi hacking and last but not least the Ubuntu-Touch Team on IRC that made it possible for me to tweak the touchscreen driver.
However, the system you are about to create is not fully functional, there are still things missing (a working sound driver for example). Its nice to play with it anyway
Heres a quick walk-through:
We will flash a kernel to the toshiba folio tablet which makes it possible to boot from an sdcard or USB-stick (You have to choose one, we need at least 2GB, I'd recommend 4GB so you can install fancy stuff like OpenOffice etc.).
We will then create a root filesystem with rootstock, which will hold our Ubuntu system (similar to your hard drive-Ubuntu).
Finally, we have to tweak that filesystem and change passwords, copy wifi driver etc.
Then we're able to boot a beautiful Ubuntu.
Things you will need:
- A Computer running Linux (Debian / Ubuntu would be great. If you're not running Linux on your computer, running it on the folio would make absolutely no sense. Please don't ask, I don't know how to install it in Windows.)
- The files i added to this post
- A SD-Card, 2-4 GB should be fine.
- optional: A second SD-card, 128MB would be enough (for flashing)
- A USB hub (If you want to boot from USB AND use a keyboard.
- Some time... =)
The first thing you should do is flash one of the update.zip files; choose update-sdmmc.zip (this will boot your folio from sdcard) or update-usb.zip (this will boot from a usb pen drive), open it and unpack the content to a sdcard (This has to be a SDcard, we're gonna flash our device from there.)
Backup all your data on your folio (I'm serious! It'll be gone!) and turn it off.
Put the SDcard in its slot and turn the folio back on. Press + hold both power and volume up.
Follow instructions to do a system update (If you've never done this before you shouldn't start now =) )
When it reboots, your folio will show some funny black and white linux text stuff and hang somewhere. Congratulations! You just bricked your tablet. Now lets see how we can fix it... Turn it off (Keep power pressed for about 5 seconds) and take out the sdcard, put it in your PC.
It's getting messy now, so grab a beer and let's go:
Open a Terminal on your linux computer.
Code:
#echo "Hello world!"
If your console says "Hello World" you got it. Awesome! =)
Code:
#sudo apt-get install rootstock gparted
This will install rootstock, the tool we're gonna need to create our filesystem, as well as gparted, a tool for partitioning our flash drive. You can also install rootstock-gtk, the graphical version. Try it if you like:
Code:
#sudo apt-get install rootstock-gtk
I heard that ubuntu-netbook won't work because there are drivers missing, would somebody try that and report please?
If your beer is already empty when this is done, you need a faster computer. Tell your wife the guys at xda-developers told you so
Back to the terminal:
Code:
#sudo rootstock -f MyCoolHostName -l myCoolUserName -p myCoolPassword --seed xubuntu-desktop -i 2G --notarball
This will create our filesystem with a user called "myCoolUserName" and (theoretically) his password "myCoolPassword" and install a basic xubuntu-desktop. I had to change the password manually because it didn't work this way... We'll do that later.
Rootstock will download lots of packages (You could also set it up with "--seed ubuntu-desktop", then youll download even more packages or "--seed ubuntu-minimal" or kubuntu... I still didnt find a list of seeds online :-/
The creating will take quite some time, get another beer.
When this is done, you'll get a file like this : "qemu-armel-201104112120.img". We will now mount this image: (make sure the directory /mnt/ does exist and is empty:
Code:
#ls -la /mnt )
Code:
#sudo su
(its simpler to be root for now)
Code:
#mount -o loop qemu-armel-201104112120.img /mnt/
(You are aware that your filename is different, are you? Try this:
Code:
# mount -o loop qemu-armel-*TAB*
and your terminal will automatically fill in your filename. Awesome linux, huh? =)
)
Code:
#cd /mnt/etc/
#mv fstab fstab.bak
#echo "proc /proc proc defaults 0 0" > fstab
#echo "dev /dev tmpfs rw 0 0" >> fstab
Note that the first time we create a file called fstab (echo asdf > fstab), then we add one line to this file (echo asdfasdf >> fstab)
Now we need to copy our wifi-driver over. Remember I told you to write down the directory you put them in? =)
Code:
#cp /home/YourUserName/Desktop/FolioStuff/firmware /mnt/lib/firmware
We will now do something stupid: We chroot into our arm-based system from an intel-system. But since we're only changing passwords, we should be OK.
Code:
#cd /
#chroot /mnt/
#passwd myCoolUserName
#passwd
#exit
That's it, we're out of the chroot.
It's now time to prepare the SDcard (The steps are the same for a USB Flash drive, I think you'll figure them out.)
Find out how your SDcard can be accessed (You should still be root):
Code:
# fdisk -l
In my card reader, it's "/dev/mmcblk0", it could also be "/dev/sdb1" in your computer.
Now there are two possibilities:
1. You know what youre doing. Then it's easy: You wipe the only partition (or, if there are more than one, the first partition) on your sdcard and format it with ext3:
Code:
#mkfs.ext3 /dev/mmcblk0p1
Note: The device is called /dev/mmcblk0, the partition itself /dev/mmcblk0p1 (Partition 1)
2. You are not sure about this. No problem, start gparted: (as root!)
Code:
#gparted
In the upper right corner, select your flash drive, delete all partitions and create one formatted with ext3. Close gparted.
Mount your freshly created partition somewhere (i chose /mnt2/):
Code:
#mkdir /mnt2/
Code:
#mount /dev/mmcblk0p1 /mnt2
We can now copy our filesystem over. Make sure you use exactly the same flags (rfp for recursive, force, preserve (attributes))
Code:
#cp -rfp /mnt/* /mnt2/
OK, that could work. Unmount the sdcard:
Code:
#umount /mnt2/
Put it in your folio and cross your fingers.
Wifi drivers will be up soon...
It's recommend to add build-essentials to your rootstock image too..
Because then you can easily build the wireless lan drivers on your devices..
Maybe I'll post a howto this afternoon!
Is this Ubuntu really usable (for daily work) with the folio 100 (touch, response speed, ecc.)?
Thanks.
Yup, it's usable for everyday work. It's quite fast on the Folio 100, I've been pretty impressed when I tested it a few weeks ago.
Thanks ph84
It seems most difficult than expected but, great job !
Only i have 1 question, bricking the tablet sounds dangerous... is possible break out the tablet and get a rock?
Thanksss!!!!!
if ubuntu is installed on sd, does that mean that we can dual boot foliomod from nand and ubuntu from sd/usb?
Hm... I'm using Ubuntu 11.04 and I'm getting this error at the end of the rootfs creation :
E: Sub-process /usr/bin/dpkg returned an error code (1)
E: Second stage build in chroot failed !
E: Please see the log to see what went wrong.
I: Cleaning up...
.....
I: Umounting temporary Image
umount2: Dispositivo o risorsa occupata
umount: /tmp/tmp.zaZ1j1Tgt6/tmpmount/proc: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
umount2: Dispositivo o risorsa occupata
Click to expand...
Click to collapse
Do you have any idea where I can find the log?
And this procedure will build in the tablet a dual boot? Or dualboot is another procedure?
what is the *.rar????
No it's for singleboot only...
You can only start Ubuntu installed on SD-Card/USB-Stick with this procedure...
I don't know wether the boot-partition is locked when you are booting ubuntu/android..
If not it should be possible to build some applications to flash the boot-partition on the running system to change from ubuntu to android
When I do the rootstock step,I got this error!!!Please help!!!
I: Base system installed successfully.
I: First stage install done
I: Using Chroot for installer
Adding 'local diversion of /usr/sbin/invoke-rc.d to /usr/sbin/invoke-rc.d.rootstock'
Generating locales...
en_GB.UTF-8... done
Generation complete.
Generating locales...
en_US.UTF-8... done
Generation complete.
/bin/installer: line 53: syntax error near unexpected token `+'
E: Second stage build in chroot failed !
E: Please see the log to see what went wrong.
I: Cleaning up...
.....
I: Umounting temporary Image
I: A logfile was saved as //rootstock-201104140706.log
I: Done
Click to expand...
Click to collapse
Could you upload an *.img for us in this forum?
or a databank,etc?
mhmm it always hangs in the xulrunner configuration.. bahh someone know a solution for this? or does i realy have to chroot the rootfst and install everything manualy =(? Cant find any solution on google for this bug =/
sony_tornado said:
what is the *.rar????
Click to expand...
Click to collapse
Nvm, I was talking crap...
schnudergof said:
mhmm it always hangs in the xulrunner configuration.. bahh someone know a solution for this? or does i realy have to chroot the rootfst and install everything manualy =(? Cant find any solution on google for this bug =/
Click to expand...
Click to collapse
Just try rootstock without the parameters on --seed..
Maybe it will work..
You wont have a Desktop Enviroment like Gnome or something but you wont need that for installing the wireless drivers...
And after installing wireless drivers you can install ubuntu-desktop or something with apt-get!
Ok, I have been looking at rootstock, and if you install rootstock-gtk and than click on tasksel there is a whole list of seeds to chose from. I Think im going to try build the netbook build.
On a side note:
We will now do something stupid: We chroot into our arm-based system from an intel-system. But since we're only changing passwords, we should be OK
Click to expand...
Click to collapse
with chroot your only changing the root of your file system, your not running anything from there.
But its its in no way a complaint to your awesome guide! Thanks and keep up the good work!
shidima_101 said:
with chroot your only changing the root of your file system, your not running anything from there.
Click to expand...
Click to collapse
Thats right but when you change your root shell to the rootstock-fs you can also use sudo apt-get update/install and install it into the rootfs!
ph84 said:
Meanwhile, open another terminal. (This is linux! We're gonna multitask since our computer is capable of handling that!) Go to where you stored the attached files, for example
Code:
#cd /home/YourUserName/Desktop/FolioStuff
and unpack them:
Code:
#rar x *.rar
Click to expand...
Click to collapse
Where/what is the "attached files"?
Thanks
Just go to the first page, press STRG+F and type attached into the search window...
I hope you will find the attached files.. Else you dont have to try installing ubuntu on your folio >_<
°EraZoR° said:
Just go to the first page, press STRG+F and type attached into the search window...
I hope you will find the attached files.. Else you dont have to try installing ubuntu on your folio >_<
Click to expand...
Click to collapse
The files I found are only *.zip for update bootloader. Where is *.rar file?
Thanks
Zen's Backtrack 5 For HD2 (and other) Android Smartphones
V0.3
----------------------------------------------------------
New app for loading this (and other) Linux Systems! - https://play.google.com/store/apps/details?id=com.linux.autoloader
Image and app support can be found here --> http://www.zenfulapps.com/
Packed - 640mb
Unpacked - 2.6gig (fits on 3.3 img now.)
--GRAB THE UPDATED SCRIPTS ATTACHED TO THIS POST, THEY ARE NOT PACKAGED INTO THE ZIP--
--Scripts are set to load from EXT4 partition, when i modify them for the .img's ill add them to the script pack--
--if you have .img mounting scripts from previous versions, they will work, as long as file names and directories match--
V0.3 Download
http://www.zenfulapps.com/Android/backtrack5-0.3.7z
(MD5 is still the same
MD5sum (of .7z file) - 9a4796f0ed96e03579c2b4a684d026f5
--------------------
Script pack contains
--------------------
btgo - mounts BT5, and askes how you would like to start, CLI or VNC
bts - stops BT5, and unmounts everything for it.
btl - used to login to bt5 after it has been mounted, to avoid all those "resource busy" messages
mkcore - directory installation and swap file creation
-------------
What you need
-------------
Rooted Android Smartphone
Linux on PC
Busybox installed on your device
SDcard adapter or reader, if neccesary
----------
Lets begin
----------
There are 3 different ways you can do this:
1. Fresh install on EXT4 Sdcard partition ( I HIGHLY recommend this method if possible, much better, a bit faster (no double loops to write to)
2. Create Fresh .img
3. Replace old BT5 system .img
=========================================
1. Fresh install on EXT4 Sdcard Partition
=========================================
This portion of the guide is to install BT5 on a FRESH EXT4 partition on your SDcard. Throughout this porcess, you will:
Backup your current sdcard (EVERY PARTITION, this is why we use PC-linux and not windows)
Fully erase and repartition your SDcard
Replace Android system and user data
Install BT5 on third partition
prepare system for chroot and VNC connection
----------------------------------------
Boot into your Linux operating system. **I DO NOT recommend using virtualbox or vmware, as drivers for usb and SDcard connections arent direct, things can go wrong.**
Shutdown your phone, and remove your SDcard. Do not use adb, or any other tools to do this.
insert your SDcard into your computer (adapter or reader yada yada) and mount every partition.
Make careful note of what is on which partition. safest way to back everything up is through the command line with the command
Code:
sudo cp -Rfvp /media/your-sdcard-partition/* /where/your/backup/folder/is
Do this for each partition, whether you have 1, 2, 3, or more.
In my case, my backup directory looks like this:
Code:
[[email protected] sdcard-backup]$ ls -l
total 12
drwxrwxr-x. 2 hookup-cellular hookup-cellular 4096 Sep 13 18:48 ext2
drwxrwxr-x. 2 hookup-cellular hookup-cellular 4096 Sep 13 18:48 ext4
drwxrwxr-x. 2 hookup-cellular hookup-cellular 4096 Sep 13 18:48 fat32
(ignore the empty directory sizes, my TRUE backup folder is MUCH more vulgar and i wont display it publicly, people may tear thier eyes out )
After everything is backed up, open your partition manager (in Gnome it is gparted, cant remember the name in others)
Navigate to your SDcard, and DELETE every partition. every one.
afterwards, recreate them using this strategy:
partition 1 - FAT32 size = total sdcard size minus ext2 and ext4 partition sizes
partition 2 - EXT2 size = 256mb, 512mb, 1gb, depending on how you like your apps2sd
partition 3 - EXT4 size = size you want for linux, minimum should be 4gb (mines at 10gb, i like my linux and got 3 different ones on it at the same time.)
When you are done, copy back your fat32 and ext2 stuff using the SAME COMMAND AS ABOVE (sudo cp -Rfvp from/here to/here)
Now, unzip/tar the .tar.gz package. I recommend extracting it to your pc before trying to put it on your sdcard.
Using the copy command above, put the extracted files onto your sdcard's EXT4 partition.
Double check the partition (navigate to it in nautilus or whatever filemanager your using) and ensure that it has the system copied over properly. You should see /boot /etc /root /sys so on and so forth, NOT just one folder with all of those inside of it.
Insert your SDcard, power on your phone, go to terminal emulator, and enter this:
Code:
su
cd /sdcard/scripts
sh mkcore
Swap file is damn near neccessary if your planning on using any GUI tools (armitage, zenmap)
Your directory structure is now in place, swap file created, and you start BT5 by typing (from /sdcard/scripts OR /data/linux):
Code:
sh btgo
=================================
2. Fresh Image Creation
=================================
for this, we use the dd command and mkfs.ext4 command.
Code:
dd if=/dev/zero of=/path/to/where/you/want/the/img bs=1M count=3300
Change this command as needed, running it as is wont do anything good. Change the of= to where you want your img to be located.
next is mkfs.ext4
Code:
mkfs.ext4 /path/to/where/you/want/your/img
select yes when it cautions about "not a block device"
When this is finished, mount it using these commands:
Code:
su
-your password-
mkdir -p /mnt/bt5img
mount -t ext4 /path/to/your/img /mnt/bt5img
now, extract the BT5 package to a place on your Computer. When finished, run this command:
Code:
sudo cp -Rfvp /path/to/bt5/core/* /mnt/bt5img/
changing parameters accordingly.
After this, copy the .img to /sdcard/bt5 and run the start scripts from your terminal emulator.
================================
3. Replace Existing Image
================================
Mount your bt5 image, erase what is inside of it, and copy in the new system:
Code:
su
-your password-
mkdir -p /mnt/bt5img
mount -t (your ext type) -o loop /path/to/your/bt5/img /mnt/bt5img
rm -Rfv /mnt/bt5img/*
cp -Rfvp path/to/bt5/core/* /mnt/bt5img/
unmount your .img, place it on your sdcard, and your all set.
==============================
Changes in v0.3
==============================
- Trimmed alot of fat, fits inside of 3.3 image now, though space is SEVERLY limited (removed CUPS and sound stuff, who needs to print from within thier phone anyways?)
- various small changes for performace improvements.
- a few new tools installed, but not tested
- restored my personal version that i nuked. It works now.
NEW STUFF TO COME, STAY TUNED!!!
First off, My apologies for starting a second thread on this, I've made ALOT of changes and i feel the first thread is dead and useless. (Reprimand me if needed
-pics coming once I find my camera could be a small while-
---------------------------------------
Backtrack5 for HD2 - v0.2
Customized by z3n
My goal: the perfect stealth
tool in your pocket
just one tap away
---------------------------------------
========================
Codename
Squeaky Wheel
========================
Updated, check second post for changelog
========================
DOWNLOAD
========================
Please use the scripts attached at the bottom of this post instead of the packaged ones, and i havent had a change to update the full image zip with it (uploads take a while )
V 0.2
Part 1 - http://www.megaupload.com/?d=D0MQVAS4
Part 2 - http://www.megaupload.com/?d=M2MRYLAH
MD5 - 06225e18cdbfee6f88daf7e9ee3a1163
SHA1 - eeba19e53565a1643703cf8938be2f8cfc12db9a
V 0.1
Part 1 - http://www.megaupload.com/?d=83B22Y00
Part 2 - http://www.megaupload.com/?d=SB98AA19
mirror - (NOT interchangeable)
Part 1 - http://www.megaupload.com/?d=HU320Z81
Part 2 - http://www.megaupload.com/?d=QN9C560Z
Checksums of bt5.img
MD5 = 863e6db99e5207a81ad0df7d13998235
SHA1 = c84d8f27df8b9b51059e5a6b09e65853f11de970
7zip required to extract.
Just over 1gb packed, unpacked is 4.9gb.
========================
INFO
========================
This is my first release of a customized, working, mostly stable BT5.
Many things have been added, taken out, and configured to be used within the Android system. For a full list, please see the bottom of this post.
Mounting is different than most other linux .img installations, allowing for a full (and expandable) image.
V 0.2 Now has a swap file created when you run the mkdirectory script. This swap file is necessary, as with all my tests, When you run VNC with most of the major tools, there's a high chance of the phone running out of memory (im running no extra apps, completely stock Hyperdroid)
(if you have a swapfile already, you can say no to creating another, just make sure that the file is located at /data/bt and named btswap.)
**This image is in ext4, make sure your kernel supports it!**
**Everything tested on Hyperdroid-CM7 by pongster**
==============
INSTALLATION
==============
You need:
-Full Nandroid Backup in case something goes batty
-16gb HD2
-ext4 support on your ROM/kernel (lost my ext2 image due to my own stupidity, will create another matching one later)
-Linux on PC (to create the ext4 partition)
-Busybox (from market)
-VNC Viewer (from market) (optional)
FAT32/EXT4 Split card
---------------------
1.
Back up your HD2 and SDCard to safe places (off of the phone and sdcard)
2.
Boot your linux installation and open partition manager. erase all the partitions on yor SDcard. Then create them in this order.
1. FAT32 - size of this is total sdcard size minus 6.5g (for bt image) minus 100mb for aps2sd
2. ext2 - 100mb
3. ext4 - 6.5 gb
3.
Copy the bt5.img to the root of your third partition.
copy the bts folder to the root of your FAT32 partition.
4.
if this is your first time using this script/image, run the mkdirectory script first with
Code:
su
sh /pathtoscripts/mkdirectory
Load up your android terminal and type
Code:
su
cd /path/to/scripts
sh go
5.
Now it asks you if you want to log in to the console or start vnc automatically. (check log for port, usually 5901 or 5902)
DEFAULT VNC PASSWORD IS: toortoor
DEDICATED SDCARD
----------------
Same as everything above, minus the FAT32 partition.
"sh ded"
starts for dedicated SDcard instead of
"sh go"
Proper Shutdown Procedure
=====================
Stop script has been modified to shutdown backtrack and all of the (usual) programs that stop things from unmounting properly.
Exit any VNC connection you currently have.
1. Run sh stop (from your scripts location)
2. Reboot phone as a precaution.
One thing i did personally to make this easier was load the scripts onto /data/bt, so switching SDcards or locations doesnt matter.
(I also changed the terminal start directory to my scripts folder easy quick access)
=======================
Main Features I've gotten to work
=========================
-Clean mount/umount, as long as VNC and MySQL are killed BEFORE exiting the chroot - stop script kills these now
-Apps no longer disappear for good with sdcard removed, only disappear until SDcard is reinserted (apps2SD/loop device problem, any ideas?)
-MySQL for metasploit
-Metasploit working
-Armitage working, missing some "Attack" options (looking into it)
-Zenmap installed
-OpenVPN installed
-Traffic analysis possible with tcpdump (local only)
-Enables possibility for FakeAP attacks
-macchanger works (kinda, phone needs a reboot for original MAC to return)
-Armitage Launcher placed on Desktop (takes a while to load, be patient)
-Terminal Launchers in various places (updating may randomly remove your terminal, synaptic placed on desktop as standby to redownload terminals
-guake installed (drop down Terminal, makes commands easier to see while working) (not configured to a key yet)
This probably works with other Android phones too. If you change the scripts, and as long as it has a external SDcard you can partition.
if your using a different phone, this is untested unless specified otherwise.
-boot and shutdown scripts run clean as long as VNC and MySQL are shut off(in almost all cases)
@ XDA
http://forum.xda-developers.com/show....php?t=1152994
PASSWORDS
------------
MySQL - user: root pass: toor
VNC - User: root pass:toortoor
sys pass - user:root pass:toor
(I know, standard ones, but this should answer a few questions)
===============================
Thanks
===============================
anantshri - for the original scripts and BT5 img for android
BT dev team - (of course )
and all of you
===============================
Information, bugs, and oddities
===============================
One important thing, While performing heavy operations, its normal for your screen to not turn on for a while if it turns off. Dont panic, just give it some time to finish whatever you were running and your phone will be back to normal again. DO NOT PULL THE BATTERY UNLESS ABSOLUTELY NECESSARY.
To avoid this, get wakelock (known to cause problems) or set your screen timeout to some large number.
Swap file will help with alot of this.
These are the features I've tested out so far.
No major changes to anything, (except new packages) just configuring everything i see.
If you find anything you want added in or that is acting odd, please let me know. Same goes for if you fix something!!
Overall
-------
-Repo's activated, most things work (upstart processes fail, for now)
-startvnc and stopvnc no longer give that pesky USER error
-startvnc starts mysql database for metasploit
-stopvnc stops mysql (mostly, invoke ps -A and look for mysqld. Kill it with fire(-9) if need be)
-network traffic is capture-able with tcpdump, with wifi hotspot activated
-working on adding in a swap partition on sdcard (if possible)
-openoffice installed
-openVPN installed (the quieter you become...)
-Removed Zoho Web services
MySQL
-----
default user - root
default pass - toor
-Starts automatically with startvnc
-stops automatically with stopvnc
-start manually by invoking "mysqld"
-Only runs as root (for now)
-Console hangs when it is manually loaded or shutdown, service continues running though. killall --signal 9 mysqld if needed.
Metasploit
----------
-Loads up alright (45-90 seconds)
-MySQL already set as default DB
-Must manually connect to MySQL DB each instance of metasploit by invoking (from msf) db_connect root:[email protected]
-working on a possible way to limit cpu consumption to prevent system hangs(cpulimit does some nasty things)
-So far, this is the only connection string ive been able to get to work: root:[email protected]
Armitage
--------
-Takes forever to load (30 seconds for connect screen, 4 minutes or so for main client)
-Causes system hangs frequently (to minimize this, leave the vnc server on your screen, and set the display timeout to 10 minutes-switch it back when done to conserve battery life)
-So far, this is the only connection string ive been able to get to work: root:[email protected]
-Can Crash phone if running too big of an operation (Max Phone memory problem, fixed in v.2 with swapfile added)
Zenmap
------
-Slows phone down (incredibly bad with more complex scans, of course)
-Some Complex scanning options can crash phone (Nothing damaging has happened)
-will attempt to throttle cpu usage in the future
-Can Crash phone if running too big of an operation (Max Phone memory problem, fixed in v.2 with swapfile added)
Aircrack-ng suite
-----------------
-Aircrack-ng works
-Airodump-ng doesnt work (needs monitor)
-Airdecap-ng untested
-Airdecloak-ng untested
-Airbase-ng doesnt work (needs monitor)
-Airmon-ng doesnt work (needs monitor)
-Aireplay-ng doesnt work (needs monitor)
-Airdriver-ng doesnt work (yet)
-Airolib-ng works (doesnt do anything yet)
-Airserv-ng doesnt work (needs monitor)
-Airtun-ng doesnt work(needs monitor)
Plus lots of stuff for the future, stay tuned!!
http://forum.xda-developers.com/show....php?t=1152994
In the future
=========
-nessus
-Booting via HD2 Toolbox by d4n14l (sp?)
-Custom kernel (WAYYYY down the road, but working on it)
and more
--Copyrighted by z3n, 2011
(just kidding, but it looks good )
Looks good will give it a go.
Thanks for sahring
I we could get our wifi card into monitor mode --> awesome!!!!
Thanks to z3nful & everyone made this possible!
Enjoy everyone
The next release is going to be faster, stabler, and more useful
I'm also working on a round-about way for packet injection and monitor mode
Stay tuned
Sent from my Hyperdroid Pocket Laptop
cool.. good job man..
Are you trying to patch the wifi drivers ? =D
Holy crap.....this is a dream in the making Bring on monitor mode and packet injection
I've done some researches.. and found out that many devs have tried making the driver to work on the Monitor mode.. but they failed to do that.
It looks to me that Backtrack on HD2 is kinda useless.
Not useless, just last night I ganked my roommates computer with my phone
As far as monitor mode and injection go, sadly, they may be right that its not possible, but I got some ideas that may make it work, I just need to hammer out some kinks in BT first
And who needs monitor when you can fakeAP?
"Make them hand you the keys and you don't have to break their Window(s)™"
Sent from my Hyperdroid Pocket Laptop
A m a z i n g
Next release is going to be even better this 5gig image is almost full, so I'm going to expand it to 6gig, along with instructions on how to expand your own image if that's to large or want even more space.
Btw, Wine should be good to go in the next one
stay tuned!!
Sent from my HD2 "Pocket Laptop"
I would love to see some Sceenshots (or better: a video) here!
Lol will do, gotta go find my 10 year old Polaroid I've been using this phone or all my pics and videos, so this could be tricky
Sent from my HD2 "Pocket Laptop"
good to see development beyond just starting up the image... I would be taking some pointers from here for my device too....
hope you don't mind that....
Not at all, I've been trying to track down your name again so it can add you to the credits part, as the basis of the scripts was yours lol, I just changed the loops and mounting structures around a bit, and added some stability checks.
The scripts for this image are slightly out of date but I got new ones going up once I have time they should fix a few of the small eerrors people get while mounting
My next version is a little ways out (works gotten crazy busy lately) but it'll be out eventually
Sent from my HD2 Pocket Laptop
Not Booting!
Hi Thank you for sharings this up!!! this is like a dream for alot of people.
i have followed all your steps but i have a problem when i run the scripts, the folders dont get created because when i run go i get a bounch of folder not found.
my SD card had some differences is a 16GB
with
Fat32
Ext-sd/ EXT2 -->1GB
EXT3 --> 100MB
EXT4 --> 6.5GB
could this setup causing the script to look on the wrong partitions? i have alot of time with out playing with Shell scripting but i would like to know if that is the place i should start looking for a fix
-edit- just double checked (forgot scripts were on my phone... its been a long week lol) and you should just need to change the mount -t ext4 /dev/block/vold/179:3 to /dev/block/vold/179:4
Also, did you run the new mkdirectory script? If you have the one packaged with the image its out of date. The attachment on the fist post has the updated ones
Ignore all mmcblk's
For another "buffer" partition, you need t point the sdcard parts (mmcblk0p* and vold/179:*) to what yours are in /dev/block. In your case I think you just need to change any vold/179:3 to 179:4. If you go to /dev/block/vold it will have folders from each partition (they are numbered 0 and up, but 1 would be your fat32, 2 is ext2 so on and so forth)
When I'm near my computer ill figure out the full ones for you
Sent from my HD2 Pocket Laptop
can I get it for Htc desire..??
It should work, as long as you have a big enough sdcard, your phomes kernel suppers ext4, and you might have to change a few small variables
Sent from my HD2 Pocket Laptop
Miui v4 ics
V1 Pre Alpha :
Bad:
Not rooted (V2)
Big size (it's a MIUI) its an ext4 take more place but faster then ext2
Good :
Faster
Mount internal and external in same time on usb storage
http://www.multiupload.nl/YOJJ6EGDTB
Need this Fota :
http://forum.xda-developers.com/attachment.php?attachmentid=1340004&d=1348112866
Can use this fota for Jb too
1634 Score Quadrant Bench
Update kernel lzo compression faster boot :
http://www.2shared.com/file/elX9vC8e/zImage.html
If you have some prob with lock tell me
Ps : MIUI better on Nand more place more faster
Do i just replace previous ?
basbulletje said:
Do i just replace previous ?
Click to expand...
Click to collapse
yes
so it's a beta... i'm just trying it!
Devriel said:
so it's a beta... i'm just trying it!
Click to expand...
Click to collapse
Just kernel for ICS now
I will try tomorrow with full version of this cfw
Very good job! I congratulate you!
This is one of the most complete truth Roms?.
Will you do a video to see the optimization?
Update :New kernel
Also for now i can upload Slim ICS with optimisation...
MIUI coming later not finished...
Tigrouzen said:
Incoming :
MIUI V4 ICS
Kernel :
Super optimised
Swap
Sd mount external USB storage
Boot on 39sec
Super Fast
....
For now you can test kernel and install SwapperApp test it with any ICS rom for wave of course
Or you can test it like this :
Before make a backup your sd :
You need have on your sd second parition swap
on android terminal or adb shell
fdisk /dev/block/mmcblk1
p
d
(delete all partition)
n
p (primary)
1 (first)
first sector : (enter)
last sector : +3400M (if your card are 4go)
t
b (fat32)
n
p
2
enter
enter
t
2
82
w
after :
mkswap -c /dev/block/mmcblk1p2
and:
mkfs.vfat -c /dev/block/mmcblk1p1
then :
vi /etc/fstab
write this :
/dev/block/mmcblk1p2 swap swap defaults 0 0
for save like this :
:z or :w (cause im on azerty keyboard)
then quit:
:q
Or other way in windows :
notepad
copy past line
and save file name fstab
with no extension
(you need to choice in option folder to see extension on file in windows for no mistake)
and adb push fstab /etc/
or copy it on sd and on terminal android if you dont have adb shell do this :
cp /emmc/fstab /etc/
then in terminal or shell :
chmod 0755 /etc/fstab
finaly reboot and on terminal android :
swapon /dev/block/mmcblk1p2
if you want all time swapon start you need to add on script in /etc/init.d/ folder
SlimFast with optimise and debug :
170Mo Free
TvOut
Rooted...
Upload
Click to expand...
Click to collapse
can you please add liveOC and voodo.colour support to your swap enabled kernal.
---------- Post added at 09:41 AM ---------- Previous post was at 09:39 AM ----------
liveOC + swap enabled would be really.nice and smooth.
m90ultimate said:
can you please add liveOC and voodo.colour support to your swap enabled kernal.
---------- Post added at 09:41 AM ---------- Previous post was at 09:39 AM ----------
liveOC + swap enabled would be really.nice and smooth.
Click to expand...
Click to collapse
LiveOC Rebellos can do it, need to be change on kernel
Tigrouzen said:
Incoming :
MIUI V4 ICS
Kernel :
Super optimised
Swap
Sd mount external USB storage
Boot on 39sec
Super Fast
....
For now you can test kernel and install SwapperApp test it with any ICS rom for wave of course
Or you can test it like this :
Before make a backup your sd :
You need have on your sd second parition swap
on android terminal or adb shell
fdisk /dev/block/mmcblk1
p
d
(delete all partition)
n
p (primary)
1 (first)
first sector : (enter)
last sector : +3400M (if your card are 4go)
t
b (fat32)
n
p
2
enter
enter
t
2
82
w
after :
mkswap -c /dev/block/mmcblk1p2
and:
mkfs.vfat -c /dev/block/mmcblk1p1
then :
vi /etc/fstab
write this :
/dev/block/mmcblk1p2 swap swap defaults 0 0
for save like this :
:z or :w (cause im on azerty keyboard)
then quit:
:q
Or other way in windows :
notepad
copy past line
and save file name fstab
with no extension
(you need to choice in option folder to see extension on file in windows for no mistake)
and adb push fstab /etc/
or copy it on sd and on terminal android if you dont have adb shell do this :
cp /emmc/fstab /etc/
then in terminal or shell :
chmod 0755 /etc/fstab
finaly reboot and on terminal android :
swapon /dev/block/mmcblk1p2
if you want all time swapon start you need to add on script in /etc/init.d/ folder
SlimFast with optimise and debug :
170Mo Free
TvOut
Rooted...
Upload
Click to expand...
Click to collapse
Dude, i'm not getting it will you put on a simple TUT please. or anyone
Thanks in advance
Update Slimfast for test use...
Tigrouzen said:
Update Slimfast for test use...
Click to expand...
Click to collapse
testing right now ..
Edit ; Just copied rom files to internal memory and booting to android after badadroid screen phone is turn off ? why ?
hero355 said:
testing right now ..
Edit ; Just copied rom files to internal memory and booting to android after badadroid screen phone is turn off ? why ?
Click to expand...
Click to collapse
Its difficult to find this bug o Wave II no lcd and ddms show me all time screen... I need Wave I...
Tigrouzen said:
Its difficult to find this bug o Wave II no lcd and ddms show me all time screen... I need Wave I...
Click to expand...
Click to collapse
after badadroid screen phone is turning off
hero355 said:
after badadroid screen phone is turning off
Click to expand...
Click to collapse
Did you see lockscreen ?
Tigrouzen said:
Did you see lockscreen ?
Click to expand...
Click to collapse
Nothing after first badadroid logo phone is turning off
hero355 said:
Nothing after first badadroid logo phone is turning off
Click to expand...
Click to collapse
Ok
Hello there!
Yep, he's right. I can't see anything after first "badadroid" logo.
Update
Its slim rom optimised ICS im working on MIUI more fatser JB but making mistake i lost all my work...
Sd working browser work....
coming later for MIUI
THIS IS A SCRIPT TO HAVE SWAP AND NOT A ROM!
I tested the swap on "CM10.x" by volk204 but there isn't a reason it shouldn't work on other rom versions.
version 1.0 13/11/2013 18:29 GMT+2
I experienced some lag with my wave due to its low ram memory. So after testing a few things i found myself more comfortable with setting up swapfile on sd card(NAND memory); after few minutes this terminal becomes really smooth. (It strangely is faster than setting it up on the phone memory, atleast for me)
The idea is mine, but checking around i found that many other script were made. I got the sleep line to boot part idea from "Defiant07 @ XDA" (http://forum.xda-developers.com/showthread.php?t=2359182). Everything else (as simple it is it's all mine)
Swap is the *nix term for virtual memory, that maybe many are familiar with on windows.
You set up a partition/file and use that as virtual memory. It will be much slower than real ram, but it will be much faster than reloading everything from disk everytime.
Code:
#!/system/bin/sh
# This script was authored by Defiant07 @ XDA. If you use/redistribute it, eve$
# Thanks to zeppelinrox most of all, but also many thanks to dk_zero-cool & gu5$
# Much thanks to pikachu01 @ XDA for permission to use the sysctl tweaks from T$
# Read Karl Marx!
# Nearly entirely modified by skyglow
swapfile="/storage/sdcard0/swapfile"
#swapsize in KB
swapsize=524288
swappiness=90
vfs_cache_pressure=100
dirty_background_ratio=5
dirty_ratio=20
dirty_writeback_centisecs=500
dirty_expire_centisecs=200
while [ ! "`ps | grep -m 1 [a]ndroid`" ]; do sleep 10; done
if [ ! -f "$swapfile" ]; then
dd if=/dev/zero of=$swapfile bs=1024 count=$swapsize
mkswap $swapfile
fi
# sleep 30
# mkswap $swapfile
swapon $swapfile
busybox sysctl -e -w vm.swappiness=$swappiness
busybox sysctl -e -w vm.vfs_cache_pressure=$vfs_cache_pressure
busybox sysctl -e -w vm.dirty_background_ratio=$dirty_background_ratio
busybox sysctl -e -w vm.dirty_ratio=$dirty_ratio
busybox sysctl -e -w vm.dirty_writeback_centisecs=$dirty_writeback_centisecs
busybox sysctl -e -w vm.dirty_expire_centisecs=$dirty_expire_centisecs
exit 0
Requirements
Superuser rights on terminal to change permission and copy this file
Configuration
1) set up "swapfile" field to where you want your swap
2) set up "swapsize" field to an appropriate value in KB! ( i think you should try values over 307200 => 300MB to have performance improvements)
(SD or NAND version)
SD version
size=512 MB
position=sdcard root
NAND version
size=300MB
position=bada application partition
How to install
1) Download the right zip from this page
2) Extract the file from the zip
3) Upload the file in some way on the phone
4) Become superuser
5) move it to "/system/etc/init.d"
6) this file should keep hits name "99myswap"
7) change permissions of "99myswap" to 755
8) change its rights to "root:shell"
9) done, next reboot your swap will be set up automatically
P.S.
How to check if swap is activated:
Open terminal
cat /proc/swaps
Swap filename should be displayed with the right size
[ADDED DEBUG SCRIPT]
Possible problems
1) System hangs on cyanogen loading screen ( rotating circle)
INVESTIGATING
2) Battery charge lasts less.
Any kind of virtual memory use more electrical power to perform write/read on disk (SD). This is a side effect of swap.
3) File format
*NIX file format is LF and not CR-LF (for reference why this happens http://en.wikipedia.org/wiki/Newline#Representations)
You can't edit the file with windows notepad, but use something else such as notepad++ and save it in LF coding.
4) System is slower
Possible causes are:
a) you have applications on the same filesystem where you placed the swap
b) your memory (such as SD card) is too slow. Swap will work, it will just go much slower. Try it with a better sd. I tested it with a class 4 and class 10 sdcard and they both speed up. I don't have any possibility at the moment to test a class 2. (reference http://en.wikipedia.org/wiki/Secure_Digital#Speeds)
5) How to change permissions (thanks Eltjo for copy paste from your answer)
Open terminal
Type: su
Type: cd /system/etc/init.d
Type: chmod 0755 99myswap
Type: chown root:shell 99myswap
6) zRam
On my mobile it's faster if i disable zRam from Settings > Performance > Memory Management > zRam .
Anyway i think outcome may change. Try both solutions.
could be possible to use free nand memory as swap instead of sd card?
cfernr said:
could be possible to use free nand memory as swap instead of sd card?
Click to expand...
Click to collapse
I added the NAND version that installs itself in the bada partition. If you installed the sd version remember to remove the swapfile.
darklight2k2 said:
I added the NAND version that installs itself in the bada partition. If you installed the sd version remember to remove the swapfile.
Click to expand...
Click to collapse
lets try both, thank you very much
no problem.
DEBUG REQUEST
Who had the loading screen on cyanogen circle may tell me which sd card class have?
The following procedure do not install the script, it just will work till reboot.
may them try to upload the script in a generic directory such as /storage/sdcard0 and execute it with
su
cd /storage/sdcard0
sh ./99myswap
I'd like the output of that command and the resulting /proc/swaps
then use the phone, (play/call/charge/reboot)
next boot start the script again please and tell me the resulting /proc/swaps again
Thank you for the help
seems work on my phone.
installed swapfile on nand and ram increased 30mb, but low improvement in real performance.
need to change zram options, but cant find this on my phone, maybe due to language discrepancy. can you explain better?
thank you a lot
I also cannot find zram a options under B.U.X V3.1 (4.3.1 CM10.2) by Tigrouzen
If you don't have the menu for zRam it's disabled by default. To see it you should enable all developer settings.
Settings > About phone > Build number (tap 7 times)
Some more tweaks will unlock.
saltcushy said:
I also cannot find zram a options under B.U.X V3.1 (4.3.1 CM10.2) by Tigrouzen
Click to expand...
Click to collapse
Unfortunally i didn't test that rom yet but i think the procedure above will work.
darklight2k2 said:
If you don't have the menu for zRam it's disabled by default. To see it you should enable all developer settings.
Settings > About phone > Build number (tap 7 times)
Some more tweaks will unlock.
Unfortunally i didn't test that rom yet but i think the procedure above will work.
Click to expand...
Click to collapse
tested and I have to say this is necessary if you want to enjoy a few extra mb in this phone.
I recommend nand swap because everybody have 300-400 unused mb in bada apps partition.
disabling zRAM seems also recommendable.
I hope everybody take care of this script for future ROM releases
*** I will decrease swappiness to 70 or 60, I think it is enough.
darklight2k2 said:
no problem.
DEBUG REQUEST
Who had the loading screen on cyanogen circle may tell me which sd card class have?
The following procedure do not install the script, it just will work till reboot.
may them try to upload the script in a generic directory such as /storage/sdcard0 and execute it with
su
cd /storage/sdcard0
sh ./99myswap
I'd like the output of that command and the resulting /proc/swaps
Thank you for the help
Click to expand...
Click to collapse
i've a samsung class 10 32gb.
i've not run the script with sh command, just copied it to /system/etc/init.d (aplied chmod and chown) and reboot the phone. after that it hangs on CM circle on first boot and have to re-install the rom. wipe data/factory reset didn't help.
best regards
JonasVFC said:
i've a samsung class 10 32gb.
i've not run the script with sh command, just copied it to /system/etc/init.d (aplied chmod and chown) and reboot the phone. after that it hangs on CM circle on first boot and have to re-install the rom. wipe data/factory reset didn't help.
best regards
Click to expand...
Click to collapse
To try to solve it i need to know what happens when executed with the sh command
darklight2k2 said:
To try to solve it i need to know what happens when executed with the sh command
Click to expand...
Click to collapse
after installing the rom again it can boot the first time but hangs on the second like everybody else
running with sh it runs ok
JonasVFC said:
after installing the rom again it can boot the first time but hangs on the second like everybody else
running with sh it runs ok
Click to expand...
Click to collapse
that's why i said not install in the problem request
problem is with chown, just run the chmod 755. didn't run chown command last time and it booted second and third time
edit: nevermind, it hanged again
darklight2k2 said:
that's why i said not install in the problem request
Click to expand...
Click to collapse
i did it with 2 different ways....with a fresh install between and both hang
JonasVFC said:
i did it with 2 different ways....with a fresh install between and both hang
Click to expand...
Click to collapse
You're just posting and posting what happens but not what i asked you to do to five me information.
darklight2k2 said:
You're just posting and posting what happens but not what i asked you to do to five me information.
Click to expand...
Click to collapse
i did what you asked, read again, i ran it with sh: it runs fine!! creates the swapfile and outputs some parameters that are in the script like swapiness and others....
JonasVFC said:
i did what you asked, read again, i ran it with sh: it runs fine!! creates the swapfile and outputs some parameters that are in the script like swapiness and others....
Click to expand...
Click to collapse
Hi, @JonasVFC.
I understand you've been running the Swap version of Android v2.1 Volk204. How do you get it?.
Yo, if I install the file in the directory 99myswap indicating the first page, but I get that the system does not start, stays on constantly CM logo.
A greeting.
chapito said:
Hi, @JonasVFC.
I understand you've been running the Swap version of Android v2.1 Volk204. How do you get it?.
Yo, if I install the file in the directory 99myswap indicating the first page, but I get that the system does not start, stays on constantly CM logo.
A greeting.
Click to expand...
Click to collapse
May you guys try the following attached file please?
when it hangs may you post the logfile created in the phone directory ( you can get it from bada)