I experience a strange problem on my HD2 (default not-cooked rom). Almost evrytime when I sync via WMDC, battery and brightness menu pops up as on screen attached bellow. Any solution? It's little annoying.
Related
Hi
I seem to experience this problem on all HD2s. I activated the phonelock on HD2 and used a simple PIN for unlocking it. When I'm in the LockScreen, keying my PIN, the phone goes to suspend mode (or it seems like it, since the screen just blacks out and i need to press the power button again to see the lockscreen) after about 13 sec, everytime. This phenomenon happens only when phone is using battery power. It works fine when running on external power.
Is there a way disable this issue, or extend the time it blacks out. I'm using the default WM6.5 rom 1.66.707.1
Please help, Thank you.
same problem with me ! any solutions ???
settings menu all settings system power backlight
try increasing the timeout.
also settings menu all settings lock
see what options are in there. (mine won't start so i can't test it.)
I have tried all the settings i can find on the phone. I even tried changing Registry values that might be related to the timeouts. but still the same.
The screen will black out even while you are typing, so this rules out all the timers that will suspend the phone when idle for too long.
Please help, as this is a big issue for me.
Thanks.
HI,
I had a big problem on WM6.5
when I lock the phone the black light remain for 1 second, then the screen switch on full light.
in start/ setting/blacklight the control of battery black light and charging blacklight are reversed.
this problem disappear if I put in charge the phone or sync with pc, but if I restart and never sync or charger the problem remains.
this problem is on WM6.5 only, not on Android.
I try:
-task29
-some radio
-2 rom
How can solve this??
thanks
no one can help me? :'(
Hi
Strange one, when I select internet the screen dims and when I come back out it goes to the correct display brightness. I have checked the settings but cant see a reason for it . Any ideas ?
Cheers
sr
All sorted.......found setting.
There's a brightness adjustment inside the browser menu, it's likely that one of the power saving modes is checked in there, just untick it.
Sent from my CM9 TouchPad
Hello,
There is a problem with enabling wifi on my Galaxy S3: How can this be reproduced on my device?
For saving battery I switch wifi on and off regulary. But after a few times this toggle button, which is available when swiping your finger from top to bottom of the screen (which is normally light green or dark grey) turns into dark green. When going to wifi settings there is a message "shutting down". So you can not choose "scan" nor "wifi direct" nor enable wifi,...
The only way to work around this, is rebooting the device.
Any suggestion to solve this in depth?
ps: I have tried with power save off (*#0011# methode) but each time after rebooting this setting is back on and wifi works (few times).
Thanks for your advice!
Regards,
Hans
It happens to me
It recently started happening to me too. I think I will blame it on the siyah kernel... what kernel are you on?
I have this problem too, running stock JB ROM rooted.
Hi all I would post this in the development forums but I don't have 10 posts so...
I'm running Nos M7 rom and LK kernel. Every time i access the vertical quick settings and change any setting, the phone automatically switches to silent mode and the vibrate toggle doesnt do anything. I have to use the volume buttons to correct the profile back to vibrate. edit:: i dont have to change a setting, simply accessing the vertical settings puts the phone in silent. If i change the vibrate slider to on, it says on, but the phone still displays silent. It wil only go between normal and silent unless I use the volume buttons.
Secondly, every time i exit the camera, the screen brightness gets set to 100%. I have to go to quick settings to turn it back down to what it was before (I don't use autobrightness).
Also, I am not a big fan of the HTC gallery so I installed Gallery 3D (found apk on forums somewhere). It works fine however i cannot use gallery 3d to display a picture out of an MMS message unless i save the picture first. If i click view image without saving it loads the gallery and just displays a black screen with the zoom in/out buttons. Is this normal or a bug? HTC gallery displays unsaved MMS attachments properly.
Lastly out of curiosity, is it possible to get an AOSP lockscreen on the M7 rom? I'm imagining not but I coudln't find anything specific on this.
Thanks!