Hi there, i want to make a sorry for my english first.
So, there´s my problem. I wanted to connect via wifi to my network yesterday, but wifi connection was not available. It was not a first time. I downloaded, again, firmware, but I founded an old one in my pc, so my old one was about 60MB file size, and new one that i´ve just downloaded was about 71MB file size.. and half of year new.. I thinked it will be upgraded and I started to flash new firmware..everything was going fine, but at the and of flashing, i think it was normal restart, but I dont know it was and now? my A696 is not communicating with me, hard reset no work, combination for start flashing procedure no work... is there any help for my device? cause now it´s like dead body thnx everyone who can help
Related
I have got an spv m3100. I have allready upgrade it to wm6 with your help. It has been working fine for over a year now but last knight it gave me a lot of problems so i decided to flash it again. I am tring to connect the ppc to the pc with active sync but it doesnt. I have tryed it to 3 - 4 pcs but no luck and there for i cannot flash it. I also did a hard reset it reboted install all its programs by it self but it still doesnt connect to the active sync.
Any help how to flash it from the biginig pls ??
Thanks in advance
Succeded
Sorry to bug you before guys i have succeded to flash it and its all fine all i needed it it was to connect once .
Now if its posible i want to know if there is any article to read about the battery or any soft about it
Thnks again
Mate, install Hard SPL V7 (if you haven't already ) and use the sd card method to install roms...
Go to page 116 post 1160 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
for the sd card method to install Hard SPl. To use the sd card method to install a ROM, drop the steps with sspl.exe in them - I believe its steps 5 & 6.
Make sure the sd card is 2 Gb or less, formatted FAT32 and the .nbh file is named hermimg.nbh.
Cheers...
Hi mate
Ok after i flashed in the morning it started working fine for a period of time and then it started the moves again. What it actually does is that the phone is not working the device boots ok with the programs but the phone is not working at all and if it does whene i try to make a call the whole ppc is freezing.
I have tried the hard spl that you provided and i flash it. All ok. Now the problem is that after all the reboots and the freezing to get the phone working the system crash and i tried to flash it again to wm6 the one that i had for over a year now. It reboots the ppc perfectly and i can see in the three color the hard spl ok version 2.10 but when its upgrading to wm6 it freezes to 12%
Any suggestions pls
Thnks a lot
sounds like your radio rom has been corrupted. You can try to flash the shipped stock rom but it may be a permanent brick.
To check, go to settings>system>device info. Check you have a radio rom version and protocol version. If you don't then you have a brick on your hands, sorry...
This seems to be the Achilles heel with the Hermes.
Hi again and i am really sorry to bug you
Here is what i did after trying and messing around with the softwares of the ppc i decided to check for once the hardware like you said about the ratio. I basicly took the whole phone apart to pieces and cleaned it with alcohol and a brush, dodnt know if its the right way but i have to tell you that it worked. It stop give me troble with the phone it starts perfectly and works perfectly except for sometimes that the sigla goes off witch it shoudnt. With the hard spl that you provided it looks a little bit faster too and i am very gradefull.
The thing that remains is that from day one that the problem started the battery witch is new it ends really quick. two days ago before the problem it could last for 2-3 days but now it last bearly for one .
Any suggestions on this?
Thanks for your time.
Just remember that 3G uses a LOT of battery power when in an area that isn't very good for it.
If you flashed a new rom that is using 3G (also check which radio you should be using) and you were using the GSM network before, it could be this that is the problem.
I myself am finding that the battery is going REALLY fast at the moment as I'm working in an area with bad reception. The radio has to work harder to keep signal strength so the battery is consumed fast.
Cheers...
Hello,
I am having some trouble with a chinese s2,
I read alot on this forum, and I was able to flash my own s2.
But mine is bought where I live, in belgium. My dad bought one in china.
I tried to put on a belgian firmware, but he won't accept it.
I used odin, but it stops when he tries to upload the firmware:
NAND write start
write operation failed
I've been searching the whole day by now, but I can't get it fixed.
Can anyone help me out please? I have got only 3 days of android experience.
*UPDATE*
I was able to flash a kernel to the device.
before that, I couldnt start up the phone, now I can start it up again.
But I still can't flash a matching firmware...
Thanks in advance.
do you have the soft brick icon now? (the one with a small triangle between the cell and a computer). I tried exactly that flashing other country's rom and I have a failed write. Just try to flash it back to HK or asian rom and see if it boots your phone. for some reasons it should allow you to flash back your old stock rom
Yes I had that triangle, but now the phone functions normal again...
If I upload a new kernel the phone works, if I trie to upload a new firmware it wil fail and the phone won't start up again.
I cant get it solved....
Does anyone know how I can at least get the market to work on it?
I installed market apk on it, but when I trie to open it, it asks for my google account and then crashes.
Hello,
I have a Asus zenfone 6 however my problem also occurs on the zenfone 5 phones.
The poblem is as follows,
After updating from stock to latest android (v1,18 at the time) the phones battery display became incorrect making the Phone unreliable at bestand nothing seems to help fixing the problem.
I have tried a million calibratnig apps with zero success as suspect the phones software doesnt actualy understand that it has a 3230 mah battery.
I have found and compared files with a working zenfone6 where the file displays 2070mah for me and 3230 for the working Phone.
I then tried to manualy change this file had no acces even with root but every reboot or unplug it just resets the file anyway as it gets its data elsewhere.
I have tried a factory reset but not everything was actualy reset it just deleted my data but roo and all othr crap that the update screwed up was still there.
I tried ADB sideload but that didnt work and udupdates as ota so will not factory reset and remove root anyway.
I contaced asus but they are as clueless as a goats rear and just say a future update will adress it...Which we al know isnt going
to happen as this has bin a issue for some users for over half a year and they didnt fix it.
So as a final attempt to fix this Phone im planning on unlocking the botloader which i really didnt want to do as im new to all that and just want a rooted stock rom...
So to my question.
If i unlock the bootloader i know the Phone will be wiped. Will i just be able to flash any version of the stock rom via ADB or is there other things i need to do to either the Phone or the rom?
I cant go screw up my Phone without knowing how to fix and flash it again directly.
And do apps like the one asus provide usualy also allow relocking of he bootloader again after flashing the rom as i dont want to leave it open if there is no need to?
Any other ideas are welcome aswell but i have bin trying to solve this for over a month.
Heres a screenshot of the error i get when i try to reflash current rom with ADB.
http://oi60.tinypic.com/2eefzuv.jpg
But as long as that doest a full clean rom install its not helping me anyway.
i really hope someone has a easy and quick way to do a fresh install that will really make the Phone like it was just out
of the box software wise. no root no changes or anything as factory reset is not doing that for me.
Thanks in advance.
Hutjeflut.
Hello guys.
Few days ago I recieved my G Watches from service - motherboard and battery was replaced with new.
Android version was 5.1.1m but watch didnt worked good enough.
So I tried to restore them to default stock.
I Tried this method http://forum.xda-developers.com/g-watch/general/restore-unroot-lock-bootloader-t2824710
But seems now I get like stock firmware with locked bootloader, and I cant activate watches.
Connecting them to my phone - and then its only "Just a sec..". and after it says, that cant get Internet connection. Tried both WiFi and Cellular - nothing helped. Sometimes it shows "Oops, something got wrong. Try again?"
And also - I cant anyhow to change firmware or even unlock bootloader - adb doesnt recognize or shows unauthorized status.....
Im tottaly messed up and confused..
Please, help me with this.
What can I try?
Thanks in advance and sorry for my English.
hi guys,first excuse my English, is not my native language and im trying my best, i was reading since a couple of days ago, all about restoring a bricked p smart, my story is the next, mi mom gives me for birthday a huawey p smart fig-lx3, i really like a lot, i decided to root it and make a backup, so i buy a new micro sd card, read the instructions posted here and, carefully go step by step, unlock boot loader, install twrp, make a full system backup, the next day the cell was everything ok, i downloaded some apk, suddenly some installers of it just disappear, i though maybe i deleted it by mistake, installed some of it, then reboot the cell phone... and hangs it in the screen after boot... and was all in slow motion, so i though i made something wrong, so i enter twrp and restore it with my previously made backup, just after flash it, i saw NO OS INSTALLED do you want to reboot? i just freaked out a little but i have no option, so, reboot. and in the screen just appears a blue and red squares and then the white dead screen where says needs to update again... i flash it all, all partitions, i really freaked out bad time, you know, im in third world, this phone is expensive here, mi mom its gonna pay for it for months, im kind of ashamed, sad and mad with myself, i have almost no sleeped in 3 days looking for a solution, im giving up, i read about the KANGVIP rom but cant make it works, i really appreciate if some of you can give me a hint on going thru this,i know actually the micro sd was a damaged one maybe a fake kingstone, and that was the source of the hang and corrupted backup. thank you for taking the time for reading my long story. (the cell have twrp figo 321 and enter fasboot mode with no problem)
my what sap if someone can give me some advice or instructions is 522281027604