Related
Does it comes with screen protector in the box? Like Touch Pro..
Asking because I ordered one, until it comes from Hong Kong...
to have something on screen...
thx
yes there is, as is a soft protection bag.
there is but...
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
imee.h said:
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
Click to expand...
Click to collapse
I think the screen protector is not too bad, it is hard plastic not that rubbery stuff. It is certainly nothing like those cheap ones that you find in local shops and it covers the whole face of the phone, not just the screen. The cloth bag cover that comes with it is OK, but it is a bit thick. I found a black silicon cover that is made for the iPhone 3G, I made the hole bigger for the earphone plug and a new hole in the back for the camera. I saw this video of it on YouTube (not my video http://www.youtube.com/watch?v=xUOgFQ8dpzo . It isn't a perfect fit but it's pretty good until the official covers are available.
The hard plastic covers made for the iPhone won't fit the HD
My story: i snobbed the screen protector since i never used any in the last 10 years, and peeled it badly since i thought i would have never used it...but looking better to it, it was not too bad! then, I ordered two original replacement protectors from HTC, installed it VERY carefully....and now they are essentially invisible and you'd need time to realize that the screen protector is actually present....
So, refrain from excitement when you open the box!
I thought I'd read to steer clear of the protector in the box? You guys are saying to go ahead and put it on?
Screen protector
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
razor_amd said:
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
Click to expand...
Click to collapse
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Noony said:
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Click to expand...
Click to collapse
Well, i disagree.
I seem to be able to get the phone in it with minimun effort, seems that it expands after a little use, like new shoes or clothes...
my gf put on the screen protector that came with the phone.. and i guess shes good at it haha cuz we put it on with no bubbles.. no edges up.. no nothing. PERFECT. it looks great. dont even notice it. ive been using the pouch that came with it and i like it. works fine.. squeeze from the bottom to take it out and just hold it slightly firm on the sides to put it in.. pushing down from the 3.5mm jack so you dont accidentally turn on the screen again with the power button.. gets slightly easier after a bit .. dont be scared =P
Is the screen protector in the box the same as the ones sold on htcaccessorystore.com (and other places like expansys) :
HTC Touch HD Screen Protector SP P200 (2 Pieces) ??
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=173045
I managed to put on the original screen protector with little hassle but hate the quality. Hope martins ship their fast.
is there a need for screen protector at all. I mean can I damage thescreen with stylus or my fingers?
YES! and a good quality piece!
I had accidentally hit my kaiser screen with seat belt metal piece, thinking screen is damaged. Therefore, not willing to remove the film to face the reality. Only yesterday, after confirming my blackstone is configured and running well, I removed my Kaiser screen protector. The screen is good as new. The dent on the film is "high"! Thanks to the martin shield.
I know but I mean with stylus or fingers not other things?
Surfer_D said:
I know but I mean with stylus or fingers not other things?
Click to expand...
Click to collapse
Yes I'd also like to know if a screen protector is necessary, assuming yyou don't abuse it.
Also would a cheap one from ebay be any good, and if not why not?
tyronne1126 said:
no edges up..
Click to expand...
Click to collapse
Now how the hell you did that ? :< I re-applied it 150 times and i need to be like super precise on it not to go left or right even for 0.0001mm
hell yeah screen protectors are necessary!
the screen will mark over time with stylus use and of course anything that "accidentally" hits it that is hard will cause marks, and no matter how careful you are, accidents happen
ive got the packaged screen protector on and its not too bad but i have a martin fields one ready to go on instead once the htc one starts to wear
I tried multiple times to apply the protector and was always off by a hair by the time got to the bottom. When I finally got it on straight there was enough dust on under it that I got disgusted and peeled it off again. I didn't give up though and ordered the OEM screen protectors again (two to a pack) and this is how I finally installed it properly:
1. Wash your hands.
2. Wipe the phone screen clean of any dust and fingerprints.
2. Find as dust free an environment that you have.
3. Peel the top edge of the protector only then line up this up with the top of the phone.
4. Slowly apply to the protector to the phone while allowing the backing to peel off. Make sure you don't allow it to totally come off.
5. You will soon know if it's going to lay flat in the slightly recessed area of the phone screen. The protector is exactly the same size as the recessed area and there is no room for error.
6. If not, peel the protector off again while allowing the backing to reseat on the protector but not all the way to the top.
7. Reposition the top edge very slightly and repeat. It will probably take several tries to get it right. It took me about 6 times but it looks very good when done.
The replacement protectors are easier to apply because the backing is the same size as the protector so it's easier to align with the phone.
If you're careful to not touch the adhesive side of the protector and are lucky enough not to have any dust settle on it, the final result is indistinguishable from the unprotected phone surface.
I'm very curious. Does anybody know why HTC doesn't supply the machine with the screen protector already installed?
This is just a quick post with my comments on the invisible shield, in case it's useful to somebody looking for a screen protector...
Pros:
- Thick, feels very protective. No worries about putting it in a pocket and getting it scratched from keys or change
- Air bubbles really do work themselves out after a few days of use, even on a completely ham fisted install!
- Doesn't affect screen, you can still see it in daylight without rainbow or mirror effect.
Cons
- B****rd to install. Way fiddly because of all the little corner flaps and cut out bits.
- Slightly sticky to the touch means finger glide action isn't what it could be. Also scrolling with a stylus seems much more hit and miss than without the protector
- Not particularly cheap.
I'll be keeping mine - I'm mainly concerned about protection (which it should excel at) and with a little adaption you can get used to the decreased screen sensititvity. I find using the back of the fingernail to scroll actually works better than a finger.
As an aside, the best protector I had in terms of a balance between feel and protection was a generic cut-to-size one from Palm! Unfortunately it only covers the display part of the TP2 front, it's not big enough to cover the whole front.
Hope that helps someone!
Marc.
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
omarbadr36 said:
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
Click to expand...
Click to collapse
That's what I did
omarbadr36 said:
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
Click to expand...
Click to collapse
I forget to inform them not to apply the Raceshield screen protector as it is too thick and it gives a funny and unresponsive feeling when you touch the screen.
I might change the screen protector to Martin Field instead.
does the invisibleshiled protect my device when it´s falling down to the ground?? or will the phone be damaged??
djkasmic said:
does the invisibleshiled protect my device when it´s falling down to the ground?? or will the phone be damaged??
Click to expand...
Click to collapse
Invisible Shield protect your device from scratches only.
If it falls onto the ground, it'll damage your phone for sure.
Get a pouch or a case if you need that kinda protection.
i have just installed the invisible shield on my touch pro2, not particularly hard, because I have lots of experience installing these.
But if you are a noob, it will be very tricky.
Even if you install it properly, you might still get dust or dirt underneath, and you may not realize it until it has dried up, which is too late.
I got some big bubbles underneath, waiting for it to dry.
I would only recommend the invisible shield for the back part, as for the screen, it is better to stick with a regular screen protector.
Scrolling and figure gestures are not as smooth if you use the invisible shield,
i will post pics up later! cheers.
I put my IS on last night. My impressions:
1. The back fits very nicely.
2. The front doesn't fit quite as well, but you can get it on with enough patience.
3. There are a few small bubbles, I'm still waiting for them to go away.
4. Today the bubbles are still there, and the front has a rather sticky feel to it. I don't like the feel.
5. The back cover sticks very well to the gell pad I use in my car. (bonus!)
6. I don't like the ridges on the sides left by the front cover.
7. If the bubbles don't disappear completely, I will find a replacement for the front cover.
Doesn't the phone come with a proective cover on the back already and a screen protector for the screen? I would have thought that would be enough?
DJ_Enigma said:
Doesn't the phone come with a proective cover on the back already and a screen protector for the screen? I would have thought that would be enough?
Click to expand...
Click to collapse
The 'cover' on the back is just part of the back's design.
And the screen protector that comes with the phone, well, not sure about everyone else, but mine peeled off within a few days of it going in and out of my pocket.
leginag said:
The 'cover' on the back is just part of the back's design.
And the screen protector that comes with the phone, well, not sure about everyone else, but mine peeled off within a few days of it going in and out of my pocket.
Click to expand...
Click to collapse
Does the cover on the back come off? I'm confused now.
DJ_Enigma said:
Does the cover on the back come off? I'm confused now.
Click to expand...
Click to collapse
The "cover" on the back, which can sorta be seen when you look at the volume rocker doesn't come off, which is why I said it's just part of the design.
You can place any protection you want on it.
could anyone please post some pictures of the invisibleshield on tp2??
djkasmic said:
could anyone please post some pictures of the invisibleshield on tp2??
Click to expand...
Click to collapse
Also, not just what it looks like on the physical device, but some good pictures of what the SCREEN looks like with phone on? So many screen protectors distort the screen image (thinking to my mother's ipod touch screen protector that makes the pixels all rainbowy and aliased looking) and I have yet to see ONE picture of what the actual display looks like when the screen is on.
tduck said:
So many screen protectors distort the screen image (thinking to my mother's ipod touch screen protector that makes the pixels all rainbowy and aliased looking) and I have yet to see ONE picture of what the actual display looks like when the screen is on.
Click to expand...
Click to collapse
Sorry, I have no photos to offer. I can tell you that the screen does look a bit "rainbowy" when I have polaroid sunglasses on. (When driving) It's enough to be a minor annoyance, no more. Still very easy to see the screen, which is a big plus comin from a Tilt that could not be seen at all in my roadster.
Also, as a general follow-up to my earlier rant-
All the bubbles have worked out, and I've grown accustomed to the sticky face. So I will keep the IS on my TP2. I really likethe idea of the phone being well protected from all the abrasive items that find their way into my pockets.
hello to all,
I had a small incident during some home repair work where I didn't realize that I had adhesive on the fingers when I answered the tel. After that I found traces of adhesive on the screen as one can see on the photo. I did not remember if I had placed a screen protector on my toshiba at the beginning or not. Then To check it I tried to remove it with the nail to take off an edge, and an end is actually detached, except that it does not look like a screen protector, but a kind of plastic layer semi-rigid which has the thickness of a protective film! It looks like a protective hard coat which comes with the phone but is not supposed to be removed.
I am afraid now to pull it off and damage my screen even more. Then I would like to know if somebody already experienced this problem and could remove this protective layer.
If so please share your experience. I may not be the only one with this issue.
Thanks a lot and sorry for my poor English.
That looks indeed like part of the case that protects the touch screen. I will try ebay and look for a replacement case.
its avible on ebay for 17 euros only
i think that surface is not a protective layer.. i think it's part of the touchscreen.
I removed mine today. Touch screen still works
The coating makes the screen less prone to scratches, and makes slight scratches less apparent. After removing the coating, I noticed the lots of tiny scratches I made on the screen, but they're gone after I stick a new screen protector on it.
I'm glad I removed it because there's a scratch on mine.
Phil_123 said:
I removed mine today. Touch screen still works
The coating makes the screen less prone to scratches, and makes slight scratches less apparent. After removing the coating, I noticed the lots of tiny scratches I made on the screen, but they're gone after I stick a new screen protector on it.
I'm glad I removed it because there's a scratch on mine.
Click to expand...
Click to collapse
Can you report exactly how did you make it? Are you sure that it was not a previous protective screen? I've just bought a second TG01 with a scratched screen but I don't dare to do what you did
Pere said:
Can you report exactly how did you make it? Are you sure that it was not a previous protective screen? I've just bought a second TG01 with a scratched screen but I don't dare to do what you did
Click to expand...
Click to collapse
It is not a previous protective screen. It is factory applied, there's a lot of glue residue on the screen after I remove it. Took me a lot of time to remove the glue by "pushing" the glue to a side with my fingers, then cleaning it off with WD40.
I bought my second hand TG01 in June and have been using it every day ever since. A few days ago, presumably due to cold weather, I noticed this hard coat is starting to wear off, there's a mark on the screen like a badly applied screen protector, so I started to remove it.
The glue that stuck the hard coat onto the screen was very strong, so be patient and take extra care when removing the coat. Do it slowly so only the hard coat is removed but not the soft touch screen layer below it.
DO stick a new screen protector on the screen after removing the hard coat as the unprotected screen is more prone to scratches without the hard coat.
After two days of use, do NOT remove the hard coat. I think I damaged the touch screen in the progress, it's now very hard to tap on the intended position correctly.
Now going to buy a new touch screen
Phil_123 said:
After two days of use, do NOT remove the hard coat. I think I damaged the touch screen in the progress, it's now very hard to tap on the intended position correctly.
Now going to buy a new touch screen
Click to expand...
Click to collapse
Thank you for your WARNING.
I wonder if you could film the process of changing the touch! If you have success (as expected) this video would be very useful for other people interested (as me)
Crossed fingers!
It's not a video and it might take google translator to understand it, but, thanx to a guy called chdeul, there are very interesting explanations and pictures on the french forum:
http://toshiba-tg01.forumactif.com/t1205-tuto-demontage-du-toshiba-tg01
Meerau said:
It's not a video and it might take google translator to understand it, but, thanx to a guy called chdeul, there are very interesting explanations and pictures on the french forum:
http://toshiba-tg01.forumactif.com/t1205-tuto-demontage-du-toshiba-tg01
Click to expand...
Click to collapse
This is VERY interesting and well done description in the link you provided! I almost opened my phone but due to lack of appropriate courage and tools and understanding, I stopped for now, but will soon re-try!
So I've been using my Lumias for a while with a Skinomi screen protector. These are probably the best options for a screen like the one on the Lumia: the curved design makes regular plastic screen protectors (the only ones with a decent look and feel) useless on this phone, you can't even set them up properly; on the other hand, wet application screen protectors suck really bad: they have that orange peel look and feel, they give you that horrible feeling when swiping and look terrible in sunlight, Skinomi is no exception.
This got me thinking. I decided to go without a screen protector on my 400+ € piece of hardware. Am I just a mad man? Not quite (IMHO), here's why: gorilla glass can be scratched, that is for sure, but you're most likely to get only really thin scratches in the coating (given that you're careful), which can be 100% hidden with a wet application screen protector. So why would you go for one in the first place when your screen is still pristine, when you can still actually enjoy it? When you'll have the feeling that it's getting too much scratched you'll still be able to get a protector and have a fresh start.
What do you guys think? Do you still use protectors on your Lumias? Do you enjoy "freedom" instead? Please let me know. Maybe I'm just too OCD and crazy, but this phone and its amazing curved glass is giving me a lot of headaches. How do you deal with it?
vnvman said:
So I've been using my Lumias for a while with a Skinomi screen protector. These are probably the best options for a screen like the one on the Lumia: the curved design makes regular plastic screen protectors (the only ones with a decent look and feel) useless on this phone, you can't even set them up properly; on the other hand, wet application screen protectors suck really bad: they have that orange peel look and feel, they give you that horrible feeling when swiping and look terrible in sunlight, Skinomi is no exception.
This got me thinking. I decided to go without a screen protector on my 400+ € piece of hardware. Am I just a mad man? Not quite (IMHO), here's why: gorilla glass can be scratched, that is for sure, but you're most likely to get only really thin scratches in the coating (given that you're careful), which can be 100% hidden with a wet application screen protector. So why would you go for one in the first place when your screen is still pristine, when you can still actually enjoy it? When you'll have the feeling that it's getting too much scratched you'll still be able to get a protector and have a fresh start.
What do you guys think? Do you still use protectors on your Lumias? Do you enjoy "freedom" instead? Please let me know. Maybe I'm just too OCD and crazy, but this phone and its amazing curved glass is giving me a lot of headaches. How do you deal with it?
Click to expand...
Click to collapse
You're not mad, haha! You're just like me, I have a crap one on mine, I really didn't want to put a screen protector on, usually I'm good with my phones, but strangely, on the first day that I bought the Lumia, I managed to put a faint scratch on it, and that cheesed me off. So I put a half-ass martins on. Which is ok.
I've got a skinomi, and I've yet to put it on, I haven't ever put a wet screen protector on any of my phones, now based on your review, I don't want to. So I'm stuck on whether I should bother with putting one on or just taking it off completely and allowing the thin scratches.
p.s. phone currently at Nokia care centre...
Glad to see I'm not that weird Btw what do you mean by martins, maybe Martin Fields? I saw one of those on Expansys but apparently it doesn't cover the whole screen, so it will probably peel off easily like all of the non wet ones...
i didn't use a screen protector on my lumia - actually i've never used a screen protector before (i just know i'll put it on badly).
i also found the rubber-ish case provided is terrible for keeping your phone clean. somehow dust gets underneath it and just makes the phone look horrible.
Wiggy Fuzz said:
i also found the rubber-ish case provided is terrible for keeping your phone clean. somehow dust gets underneath it and just makes the phone look horrible.
Click to expand...
Click to collapse
Actually I think that the original case gets way less greasy than the phone itself (assuming you have the black one), the white one is a fingerprint magnet, but it's glossy so it's very easy to wipe...I also tried a few tpu cases, but they even make things worse.
The lumia it's a fantastic phone with a fantastic Gorilla Glass and a fantastic polycarbonate unibody, why you need to put something on this phone to protect it ???
look there
frenk_91 said:
The lumia it's a fantastic phone with a fantastic Gorilla Glass and a fantastic polycarbonate unibody, why you need to put something on this phone to protect it ???
look there
Click to expand...
Click to collapse
Maybe because you want it to stay beautiful for longer than a couple months
I've never used screen protector with 3 gorilla glass phones during 2 year time period and not a single scratch.
I've not bothered with a screen protector on mine due to the curves, and the screen is still pristine, although I never keep anything in my pocket with it.
Screen protectors sucks on every phone! I rather take a few scratches than using a protector that takes away all the good feelings from the touch.
In fact I already got a small small scratch. Doesn't bother me as much as a screen protector would though.
I'm using a Zagg screen protector (wet application) on mine. At least it adhered properly around the curved screen. Yes, it does feel different than the naked screen, but that is not necessarily a bad feeling. My $0.02
Well, right now I don't have one on. I have tried every brand, Skinomi, Zagg, Martin Fields and even some cheap one from eBay, but no luck: they either don't stay on at all or look crap with their orange peel effect. Wet ones are even worse: if a grain of dust gets underneath when you install them it gets stuck and you can't take it away by any mean, even washing them doesn't help. I ordered a Gadgetshieldz protector because I heard they're the best ones, but if it doesn't satisfy me I'll keep going naked, I'm sick of this crap, I just wanna enjoy the phone
Don't worry about the scratches guys. It's just the Oleophobic coating.
Anyway to hide those scratches, apply a small amount of clear car wax and wipe it off.
That coating does a great job by the way... my screen gets less finger-printy than previous phones.
Rusty! said:
That coating does a great job by the way... my screen gets less finger-printy than previous phones.
Click to expand...
Click to collapse
Yeah it's actually doing great. When you swipe It feels like you're not even touching the phone, it seems like a gesture more than a touch input. The SGSII I had before had a pretty smooth screen when naked, but it didn't even come close. Maybe the curved glass is helping increasing that feeling too. Day after day the idea of putting on a screen protector on this baby sounds more and more like murder. I guess I'll still be using one of those zagg-like protectors when I go to the seaside tho, sand can still screw up everything. The Gadgetshieldz thing I'm getting will help me through that I guess...
I'm not using a screen protector on my Lumia 800.
When I bought my phone, I wanted to; especially because I had 2 mini scratches on the screen within 24 hours of purchase.
Although it would be nice to have one, it's a bit of a hassle so I decided not to go out of my way to get one. I just try to be careful with my phone and the only cover I am using is the one provided for the body, but I'm even thinking about removing that.
Rare Earth said:
I just try to be careful with my phone and the only cover I am using is the one provided for the body, but I'm even thinking about removing that.
Click to expand...
Click to collapse
I'd like to go completely naked too, but given the form factor of the back I'd probably screw up the camera. As far as I can tell the glass on the Lumia is behaving pretty well, however you're still gonna get a few scratches in the coating in no time, regardless how careful you are. Honestly it doesn't bother me at all tho: the very tiny marks on the coating are only visible under a strong light, looking very closely at the phone which has to be sitting at a very special angle. With a screen protector I would get much bigger and annoying scratches, plus the hideous orange peel effect, which makes the screen really look and feel like garbage. I repeat, I can't murder such a beautiful design that way. I only hope that I won't get BIG scratches, those ones able to create that horrible rainbow effect. This is probably the only thing that would suck even more than a screen protector, but I'm not just careful, I'm literally obsessed with my phone, so it's highly unlikely to happen. Only rubbing sand at full force on the screen should have such consequences...fingers crossed
vnvman said:
I only hope that I won't get BIG scratches, those ones able to create that horrible rainbow effect.
Click to expand...
Click to collapse
I got one of those but it's SMALL. Like 2mm long fairly deep as yo can easily feel it if I want to but its sitting at the edge of the screen on the right side so I never notice it in my daily use. As I said earlier. I rather take those scratches than using a protector as it would bother me more than the scratches I get. Gorilla glass is good but it's no miracle glas by any means.
I managed to drop my brand new phone on the gravel (thank God it's my work phone) and got a really, really bad scratch that really annoyed me so I decided to get a screen protector so I wouldn't make everything worse.
I first ordered a Skinomi and while the fit was pretty decent I screwed up badly when putting it on and I wasn't about to order another one from the US. So I decided to try Copter (Swedish only brand I think?)
While it is originally for the N9 with a cut out in the bottom for the sensor it was in my opinion much, much better. It is a bit smaller then the actual screen but it is so thin, 0,178 mm, that I can barely notice it unless some dust get stuck to the edges.
There is a slight drag when using it compared to no protector but you just have to lighten up your touch and you won't notice. There is no orange peel affect at all and the best thing is that the bad scratch is gone, completely!
I would prefer not having a screen protector at all but since I know I'm clumpsy and will most likely scratch my screen even more I can highly recommend Copter. (If you can get it) In my oppinion it feels and looks ton better then Skinomi. My GF has a Zagg on here phone and in my oppinion that is crap in comparisson, thicker, more drag and an orange peel effect.
Sounds good, thanks for the tip. Anyway I could only find it here http://www.teknikmagasinet.no/db.pl...&title=Copter Displayfilm Nokia N9/Lumia 800&
But actually I don't understand a word so I really don't know wether they ship to my country or not :/
@dannejeanne: ouch, sorry to hear that. How did you manage to put that scratch on it? Did you drop it? If it can scratch that way without a particular reason this kinda sucks...
Attached are the photos of the 6T solid suit and the impact screen protector that I just installed this morning. The solid suit feels amazing and the screen protector is film and feels like glass, but is definitely not glass, just so there is no confusion there. It does seem to go from left edge to right edge completely and where I placed it seems to cover the entire screen top to bottom. The slider on the case really works and the buttons are fantastic; smooth and clicky, not at all hard to press. I love both and I'm glad I got them ordered on Black Friday now because two protectors and a case was not inexpensive but they are both super high quality and way more affordable than the glass one from T-Mobile so I'm happy with my purchase. If you have any questions I'll try my best to answer them!
Also, don't mind the doggo, she likes being in pictures.
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone....
And how's the slider button? Is it flimsy?
lemonspeakers said:
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone.... Nn
And how's the slider button? Is it flimsy?[/QUOTENnnnn n N
The buttons are great, I handed someone else my phone so two people could verify that they are very clicky and easy to push. The slider has some play in it up and down but it does work correctly when it hits the slider on the device. No issues with functionality at all this is a really great case.
Click to expand...
Click to collapse
I tried crashguard on op6 and hated it. I think I'll like the solid suit better. Thanks for the pics. Screen protector is intriguing also, seems very clear....
Thankfully I waited I can get the print backs now. Just waiting or one particular one to be available
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
how slick is the screen protector compared to the pre-applied plastic one from OP?
gregwee said:
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
Click to expand...
Click to collapse
Sorry about the late response I'm traveling abroad. I have the impact screen protector as the tempered glass one is for the back I think. Anyway, as far as not full coverage I think what they mean is that it covers the visible screen but not the edges past that. It doesn't extend fully top to bottom either but it does cover all the visible screen space as far as I can tell; no obvious cutoff of the screen though it does require precise placement to line it up properly.
Frankenscript said:
how slick is the screen protector compared to the pre-applied plastic one from OP?
Click to expand...
Click to collapse
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Can u take better pictures of the screen protector again?
AlkaliV2 said:
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Click to expand...
Click to collapse
The impact resistance shatters? I thought it was some type of plastic film.
https://imgur.com/a/BJD1GmC
I also purchased a SolidSuit (with the lens mount) for my 6T and while I like the build material, I don't like the little details. Let me explain:
1) The back of the case has this weird look and feel like it's made from three separate medium-fiber density board with a black sticker over it. I can actually feel the transitions between the three pieces and I don't like it. See the attached picture.
2) There is a noticeable gap at the top of the phone where the back meets the bumper edge. However, on the bottom, it's completely flush. My pockets are clean, but somehow dust and small particles find its way into that tiny gap. Ugh,
3) The special lens adapter is amazing since I am now able to mount the Moment 18mm WIDE V2 lens. However, since the bayonet mount sits so far away from the camera lens, it creates vignetting. FYI: The OP6T and the OP6 share the same lens adapter. I bought both. They are labeled differently, but they are identical in every way: height, mounting point, etc. If they did this correctly, the adapter for the OP6T should be SHORTER since it does NOT have the same camera height protrusion as the oneplus 6.
https://imgur.com/a/BJD1GmC
zymphad said:
The impact resistance shatters? I thought it was some type of plastic film.
Click to expand...
Click to collapse
It didn't shatter really, it just cracked along a seam where the impact was. When I get back home in two days I'll try to get pictures of the crack and the screen protector.