wifi cannot connect - XPERIA X10 Q&A, Help & Troubleshooting

Hi all, hope to get help. I have unlocked unrooted on 024 X10. There was a reason to do reset settings, after that I was able to connect to the internet. after half a day, I usually enable/disable wifi, no sim, I could not connect, it shows it is obtaining IP and then Unsuccsesful, tried to remove connection, tried another WEP keys, still no go. I have 3 pc connected, one Samsung phone at that moment and wifi router allows 6 devices to be added. Any thoughts?

Im assuming its the WIFI security mode on the router. check and change it to WEP or WPA personal or WPA2 personal on the router. and keep encryption on TKIP or AES state.
I had some connection issues on enterprise mode. delete the key on the phone and try to connect again.

hey there could be several resons for that ... the first is the signal qualety .. al phones have comparet to pc 50 % les signal strengs normaly ... there could be aloso a problem with your router ... i had somthing simular befor .. it got fix when i change my router... yes and even if you have 3 pc in the wifi with no problem it still can be your router ... since i hade the exact same problem ... 4 pc workt fine but the 5th pc and all my phone's could not connect at all .. if you can try the phone at an nother router ... se if its the router or the phone ^^

Related

[Q] Wi-Fi not working propely

Hallo everyone,
on Friday I bought a new Folio 100. Unfortunately it seems that the Wi-Fi doesn't work: the tablet connects itself only after I turn off and on my wireless routing.
If I disconnect the tablet (or the connection is lost) and then I try to connect it again, I have no chances The Wi-Fi connection cannot be established. Same if I turn on the Folio and try to connect it without a previous off-on of the router.
I have a WEP 64 Bit encryption. I tried to change it to WPA-TSK but the problem remain the same. I tried to connect to my Galaxy S using WPS2-PSK no way. The folio connects itself only after a restart of the router or with not protected nets.
I tried to install the Dexter mod 1.3a, with no results. Now I have the original FW 2.2.5.0053 back on (and the problem remains).
There is something I do wrong or I can still try or the tablet is definitely defective?
Please help me!
Thanks a lot in advance!!
Paolo
I had a similar problem: my WiFi network was seen as out of range by the tablet WiFi manager. And whenever I put the Folio in sleep mode, it lost the connection.
So, I changed the WiFi policy (in WiFi advanced settings: press menu button when on the WiFi configuration page, and choose advanced settings) to never turn off.
The tablet still has some difficulties to catch the network at startup (usually, I have to wait like 2 minutes), but now it keeps it.
Hope it helps...
Hello SinDeus,
thanks a lot for your advice, I've already tried this setting, but in my bedroom I've a bad signal and from time to time the connection get lost... and you can understand that it is really annoying to stand uphalf asleep to reset the modem. )
Anyway for the moment I've solved the problem exchanging my Belkin modem with a Zyxel of a friend of mine. The connection process is still quite slow, but at least it works without requiring a router restart.
Bye Paolo.
mine still not working...keeps on connecting/disconnecting......giving up soon...btw am using foliomod 1.3...even before when am using the stock rom..its so freaking hard to connect to my belkin router...only a few times tht i successfully get connected...help please!!!!
Hallo Neworder,
I had to exchange my router, the only way I was able to conect with belkin was restarting it.
I've also tried with static IP adress and changing the encoding type (WEP, WAP-TSK etc.) but the results was always the same. Even with the new modem the process isn't that smooth!
Quite annoying.
Sorry that I can't help you further.
the thing is if am connecting the folio to wifi connections in cafes/shops/eateries,no problem...fast and painless.
time to change modem router?
btw pademat which model of belkin u r using?am using a belkin 54g.
and ur new modem?zyxel which model?

[Q] Home wifi suddenly not working right with archos 70

I have recently returned to my apartment with my brand new archos 70. I use WPA2-PSK encryption for my wifi network. at first everything was golden, I could browse the web and whatnot just fine. as of a few days ago, wifi has not been working correctly. my device connects to the network (pulls an ip address from the router) but when I try to browse web pages or open web based apps they hang up and act as if I have no connection. it works fine on other networks (to limit the problem to my network) I have tried doing a factory reset of the device, tried power cycling my router and modem with no luck. I have also changed encryption types to no avail. i have the latest firmware for the gen 8 series. also from time to time during this session of events, sometimes it will connect to the router, then disconnect and reconnect. I have no clue whats going on because I havent changed any router settings since I got back. the only other devices on my wifi network are two laptops. any help would be appreciated.
you mean you restored to the factory settings ran through the start up all over again and it still won't connect to your router? have you tried any other types of connections or routers?
I had this problem just the other night was this close to reformatting the whole thing. but I solve the problem by turning the device off, then holding the reset button while it rebooted to turn it off again, an reinitializing the drivers.
how do you reinitialize the drivers? I did a factory wipe. and it connects, it shows as having network connectivity (even my router lists it as a dhcp client and currently making use of the access point) but no internet functions work. ive connected to other networks fine.
This happened to me when I first got my A70. What I had to do to fix it (after getting incredibly pissed, reformatting twice, and almost returning the thing) was to set it up to use a static IP address on my home wifi network. Don't know if it'll solve your problem, but it works beautifully for me and I'm able to enjoy the device now.
Just remember to uncheck "use static IP address" when you get on other wifi networks.
well, I set up static addressing, gave it a private ip, set up the gateway and dns, and it still wont connect to anything.
If set as wireless N, set as N+G or G only, latest firmware may have trouble connecting to wireless N networks.
na, I dont have it set to n, I have it set to auto which I believe puts it to g with my archos. thing is, it used to work. now it suddenly has problems.
Im beginning to wonder if the archos tablets are just picky about wireless routers. I wouldnt think so...
Upgrade the firmware
Archos published a firmware upgrade to solve this problem (December 2010). The related bug in the release notes is...
Wi-Fi: fix Wi-Fi stuck after a while when using WPA2/AES encryption mode
The new firmware download link is in the Archos website.
you can download the firmware to your computer, copy it to the root directory of the tablet using the USB cable, and run the upgrade process in the tablet.
... or you can use another WiFi network (without WPA2/AES) and download the update in the same tablet
Note: I cannot send the links, however you can use the information to search the links in the internet.

[Q] wifi problem questions on sg2

Hi all.
A per my post in this thread. http://forum.xda-developers.com/showthread.php?t=1117077
Code:
Hi all. I also have weak signal problem as well as fon router issue. The signal strength isn't as bad as being mentioned above, but still could be better.
But with my fon I can connect and connection is as showing connected, but I can't browse or have any connection to Internet whatsoever. When connecting to fon both lights on the router start flickering like normal and once connected when browsing or going to market for apps just one light blinks, when both should under normal activity.
Also I get this error message " a network error has occurred. retry or cancel and return to previous screen." when I try going to market.
I've tried setting security to none and wpa and still same no net.:confused:
Now some personal thoughts with experience with Linux and wifi. I think the problem is with driver or the firmware of wifi card on GS2. I had netgear card even thought it was claimed to work with Linux it kept on overheating and dropping connections with weak signal and every time I had to patch it to make it work properly, Many have reported same issues with other devices with Linux when it was claimed that devices should be working but were not.
My question is there anything I can do other than I haven't so far to check the problem why am not getting Internet through my fon router? Or any other checks I can do other than wifi tools I downloaded?
Thanks
coolfi said:
Hi all.
But with my fon I can connect and connection is as showing connected, but I can't browse or have any connection to Internet whatsoever. When connecting to fon both lights on the router start flickering like normal and once connected when browsing or going to market for apps just one light blinks, when both should under normal activity.
Thats the router not the phone .
Set router to no security or passwords .
DELETE ROUTER WIFI FROM PHONE REBOOT AND RESET UP WIFI .
JJE
Click to expand...
Click to collapse
Hi, I've tried that still the same problem.
And it's not the router since every other device connects to it and many laptops and computers, without any problem.
Like I said I've tried it with wpa wep and no security just open, and still no Internet, even though it's showing as connected with signal bars at the top of the phone.
I've tried the phone with friends routers and it works on those. But not with mine which is Fonera.
Does anyone know what chip is used for wifi in these phones?
In case anyone else is wondering it's Samsung's own brand.
manufacturer=Samsung Electronics
device_type=1-0050F204-1

[Q] Wifi and bluetooth problems

Hello everyone,
I'm new android user! I'm delighted whit it on x10 mini pro. But I came across a few problems:
My first problem is with WiFi. I don't have wifi router, but I made my laptop to work as a virtual router for wifi, so other computers and mobile phones are free to join my network via WiFi.
However my X10mini is having hard time detecting my wifi network, and when it does it won't connect on it! It doesn't have that problem on real routers for wifi. (My second phone, Samsung jet, can connect to my wifi network without poblem). I have tried with "WiFi Finder" but the problem is same.
I should probably mention that bluetooth has the same problem. I can detect another phone but I can't make any transfer of data between the phones!
What should I do?
P.S. I bought the phone a few days ago and the android software version is 2.1
for the problem with bluethooth try to see in the option, there is one abuot visibility, check it
... sorry for english im italian XD
androidx10 said:
Hello everyone,
I'm new android user! I'm delighted whit it on x10 mini pro. But I came across a few problems:
My first problem is with WiFi. I don't have wifi router, but I made my laptop to work as a virtual router for wifi, so other computers and mobile phones are free to join my network via WiFi.
However my X10mini is having hard time detecting my wifi network, and when it does it won't connect on it! It doesn't have that problem on real routers for wifi. (My second phone, Samsung jet, can connect to my wifi network without poblem). I have tried with "WiFi Finder" but the problem is same.
I should probably mention that bluetooth has the same problem. I can detect another phone but I can't make any transfer of data between the phones!
What should I do?
P.S. I bought the phone a few days ago and the android software version is 2.1
Click to expand...
Click to collapse
use static in on phone it worked for me
while on wifi settings press manu key on phone
you will get advanced setting
tick use static ip
then enter ip address
for me its 192.168.5.110
then getway
its ip address of your computers wifi , for me its 192.168.5.100
you can get its from right click on wifi connention on computer then status then details from detail you take computers ip for put at gateway in phone
then enter dns 1 and dns 2
you can take it from your internet connection on your pc like DSL right click on it then status then details
i was having same problem but this worked for me
Hi androidx10
Your WiFi problem could depend on the wifi network, stock firmware cannot connect to "ad hoc" networks.
Try to install apps like "wifi buddy" from the market, it can help you to scan networks and identify ad-hoc links.
For the bluetooth usually there are no problems sending files but receiveng them.
Try to install from the market apps like "bluetooth file transfer" or "astro bluetooth" to exchange files with other devices.
Good luck and enjoy your X10
hello i just bought a sony ericsson xperia x10 mini pro (u20i firmware version: 2.1-update 1) last week and I can't use it because everytime I insert my sim and then surfing the internet it gives me extra charge even if I am connected to a wireless network. and when I check the remaining balance it's 0.00 data traffic is turned off. What should I do? I want to know what are the applications that gives me extra charge. Do I have to root my phone first to delete those applications? Please help me I dont know what to do.

[SOLVED] Galaxy Ace connected to Wi-Fi but no internet.

Well, the title says pretty much all .. I earlier didn't have this problem.. Then since last night, I came back home and connected my Galaxy Ace to my home wifi, but this time, it wasn't transferring any data.. It would be connected, full signal, but no internet connection.. My browser, gmail, YouTube, PlayStore, nothing would load.. It'd keep saying Connection Error. Retry.
My wifi works properly on the computer and other devices, and my phone used to work perfectly too! Why's it suddenly giving this problem?!
Any solutions!?
SOLVED!
Okay so I figured it out on my own!!
I went to Wifi Settings>> Advanced>> and "Use Static IP"
I then provided my phone with an IP address, gave the DNS servers as mentioned by my Router, and gateway, is ofcourse, the IP adress of the router. NETMASK is Subnet mask ..
Once I filled in them correctly, and as per my router settings, my mobile is now transferring data and I can now access the internet!
Just thought I'd post a reply incase anyone else was facing this problem
No data through laptop hotspot.
I have a similar problem, but with using my laptop as an access point. My Samsung Galaxy Ace had no problem connecting to either my or my wife's laptop access points initially till about a week ago. I use an HP while my wife uses a DELL. We both run Windows 7. But, here's when things started to get strange.
1. The Ace even though connected through my laptop's AP Wi-fi cannot send or receive data after the first few seconds.
2. My wife's Dell XCD35 (ZTE Blade) has no problems.
3. The Ace has no problem connecting to an Android AP or my wife's laptop AP.
I reflash and unrooted my phone and basically brought it back to factory settings but no luck.
Tried using other services for using my laptop as an accesspoint - mhotspot, virtual router and connectify - still no luck.
tried static ip - no luck.
reinstalled the MS Virtual Wi-fi Miniport Adaptop driver - no luck.
Somehow, there is a security setting on the laptop that's preventing my phone from connecting to the internet. I think I maybe connected to the network, but access to the internet is restricted.
There are no other features like MAC address binding or anything like for laptop APs.
It's getting really frustrating now.
Any help would be appreciated.
lobotomy said:
I have a similar problem, but with using my laptop as an access point. My Samsung Galaxy Ace had no problem connecting to either my or my wife's laptop access points initially till about a week ago. I use an HP while my wife uses a DELL. We both run Windows 7. But, here's when things started to get strange.
1. The Ace even though connected through my laptop's AP Wi-fi cannot send or receive data after the first few seconds.
2. My wife's Dell XCD35 (ZTE Blade) has no problems.
3. The Ace has no problem connecting to an Android AP or my wife's laptop AP.
I reflash and unrooted my phone and basically brought it back to factory settings but no luck.
Tried using other services for using my laptop as an accesspoint - mhotspot, virtual router and connectify - still no luck.
tried static ip - no luck.
reinstalled the MS Virtual Wi-fi Miniport Adaptop driver - no luck.
Somehow, there is a security setting on the laptop that's preventing my phone from connecting to the internet. I think I maybe connected to the network, but access to the internet is restricted.
There are no other features like MAC address binding or anything like for laptop APs.
It's getting really frustrating now.
Any help would be appreciated.
Click to expand...
Click to collapse
Set your Internet to "Allow other computers to share this Internet connection". Other ideas would be to check/disable your firewall
Wifi connected but not working
My Galaxy ace plus connects fine to wifi network but cannot browse internet or play store. I am using a free public wifi so i dont know about the static ip address. And this problem was from the starting whn i just bought it. So is there any other solution for this problem or not?
I tried everything... I restarted the modem- no luck. I filled in the blank from the advance wifi setting- no luck

Categories

Resources