I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Who the f*ck claimed that you should install an official update via SD?
Do you don't know, that you will lose your HSPL and there is still no HSPL for 3.03?
Please follow this thread, maybe we can solve your problems...
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
IndigoHD said:
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
Click to expand...
Click to collapse
Yeah!!!!
Crusoe86 said:
Yeah!!!!
Click to expand...
Click to collapse
Thank you so much Crusoe. So very, very, very much... you and everyone who tried to help me.
It doesnt matter that i ended up getting it to work again differently..... i owe you one.
All of you.
and Crusoe... if you have some time to teach me the things i OBVIOUSLY dont know..... id love to just talk to you.
I guess i have a LOT to learn.
Some kind of isntant messenger? perhaps?
htc hd2 softwared update failed
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
ricotreo700p said:
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
Click to expand...
Click to collapse
Tried this and solved same error :
http://forum.xda-developers.com/showthread.php?t=668347
please tell me how did you fixed it?
kurt-willems said:
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
Click to expand...
Click to collapse
wow,
really nice help,
hope i can fix my hd2
thanks cruise for all the nice tips and tricks...
Related
Hi.
During upgrade to Crystal V3, I get this error at the end:
Please look at attached image...
Anyone knows what the fault is?
PS. This is the new Prophet that I got as a replacement for the old, bricked one...
Regards.
Try to move the install folder to C:/
I'm not sure if it is the same error message, but months ago I had the same prob and after this it worked.
Good luck
Tried, no luck...
hifiasylum said:
Tried, no luck...
Click to expand...
Click to collapse
reset phone and restart PC.. after that install aku 2.2 and retry..
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
hifiasylum said:
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
Click to expand...
Click to collapse
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Did you perform step1 before running Crystal upgrade?
I had the same problem... It worked successfully on a different computer.
panda88 said:
Did you perform step1 before running Crystal upgrade?
Click to expand...
Click to collapse
Yes, I allways downgrade before I upgrade.
Really, I do.
l3v5y said:
I had the same problem... It worked successfully on a different computer.
Click to expand...
Click to collapse
I have now tried 6 different computers, no luck. Believe that the fault is that I must unlock the phone or something. Donno, maybe the easiest thing is to sell the whole phone and get one a little more "programming friendly"?
dkleuven said:
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Click to expand...
Click to collapse
You dont think this will in some way or the other f_ _k up my Prophet?
hifiasylum said:
You dont think this will in some way or the other f_ _k up my Prophet?
Click to expand...
Click to collapse
It shouln't!
I saw from one of the thread, somebody also has the same exact problem, this is caused by the path is too long. It is suggested to put it in C:\, which you said you have done. The other person reported that it's working after he moved the installation file. I dun understand why it wouldn't work with yours.
Here is the post, finally found it:
http://forum.xda-developers.com/showthread.php?p=1549150#post1549150
User reported the problem was solved in #318
did u unlock CID yet?
Hi again. Found the problem. It seems that I was using a somewhat corrupt downloaded rom. The rom was ok, but it must have been destroyed during the downloadprocess.
Now the phone has Gullum Touch IX installed and works like a charm.
Thank for all your help, great forum!
Regards, Lars
818pro problem during upgrade to wm6
hai..
during upgrade my dopod 818pro to wm6, suddenly blackout and my upgrading was disrupted.. i reset back my dopod 818pro to continue back my upgrading..
but, I'm facing a problem which it's just hanging at start up screen..
i already try hard reset many time, but still can't to operate..
i just want to synchronize back to my pc to continue back my upgrading...
could somebody help me to this matter.. i don't know what to do now..
if it can enter bootloader, check the wiki for recovery, and follow it through.
I have a Hermes, with the pin of the USB that makes connection to PC broken... So my only shot to update the ppc is from SD.
The rom i have is one of the 1st realeses of hermes wm6.5, so that stucks all the time, even i hard reset it...
When i try to update something from SD i cant because gives me that error 000602... Any idea? So i have to unlock the cid, but if i cant access to the windows what i must do?
If i hard reset it, it enter in windows, but 2 ou 3 seconds that stuck :S
Please help me, i dont wanna be another one with a bricked pda...
gajodafeira said:
I have a Hermes, with the pin of the USB that makes connection to PC broken... So my only shot to update the ppc is from SD.
The rom i have is one of the 1st realeses of hermes wm6.5, so that stucks all the time, even i hard reset it...
When i try to update something from SD i cant because gives me that error 000602... Any idea? So i have to unlock the cid, but if i cant access to the windows what i must do?
If i hard reset it, it enter in windows, but 2 ou 3 seconds that stuck :S
Please help me, i dont wanna be another one with a bricked pda...
Click to expand...
Click to collapse
Did you install HardSPL before flashing from the SD card?
Shawn80 said:
Did you install HardSPL before flashing from the SD card?
Click to expand...
Click to collapse
Thanks for your reply. Before the instalation of that rom, i have installed 6 or more roms for weeks, without installing HardSPL... Pretty noob, but :S
gajodafeira said:
Thanks for your reply. Before the instalation of that rom, i have installed 6 or more roms for weeks, without installing HardSPL... Pretty noob, but :S
Click to expand...
Click to collapse
Hell bro it's cool. I am still a n00b myself.
But you really needed to install HardSPL before trying to flash any ROM.
I dunno what to do for you bro.
Nevermind I see you have already asked in this threadhttp://forum.xda-developers.com/showthread.php?t=323253&page=2
and it seems that ultramag69 has already answered the question.
Sorry bro this is why you should ALWAYS have HardSPL installed before even attempting to flash a ROM.
Shawn80 said:
Hell bro it's cool. I am still a n00b myself.
But you really needed to install HardSPL before trying to flash any ROM.
I dunno what to do for you bro.
Nevermind I see you have already asked in this threadhttp://forum.xda-developers.com/showthread.php?t=323253&page=2
and it seems that ultramag69 has already answered the question.
Sorry bro this is why you should ALWAYS have HardSPL installed before even attempting to flash a ROM.
Click to expand...
Click to collapse
Lol do you believe that i had 6 PPC and all of them was flashed with new roms, and i NEVER changed the HardSPL with no consequences? I sent the Hermes to a friend. He says that he needs the electronic scheme to do the electronic correction... Do you know where the hell i can find that?
Try searching for JTAG... You might get the info you require...
Look i dont know whats the difference between hspl and hspl3 ( and i have hspl3).... i need to know which stock rom to flash back without bricking the phone and, do i have to put regular spl back on the phone so i can get a replacement device. The screen is not responding at all. i cant dl the stock rom from tmobile website because it wants my IMEI# i cant navigate to the menu on my phone cause the screen doesnt work. please some one post a link here to a stock rom that i can flash that will not brick my phone. Im kinda confused cause i read around that if u have hspl3 flashing to a radio 2.10 or 2.13 will brick it thanks !
oh yeah this is what i have running on my phone so far http://forum.xda-developers.com/showthread.php?t=843221
ihateu said:
Look i dont know whats the difference between hspl and hspl3 ( and i have hspl3).... i need to know which stock rom to flash back without bricking the phone and, do i have to put regular spl back on the phone so i can get a replacement device. The screen is not responding at all. i cant dl the stock rom from tmobile website because it wants my IMEI# i cant navigate to the menu on my phone cause the screen doesnt work. please some one post a link here to a stock rom that i can flash that will not brick my phone. Im kinda confused cause i read around that if u have hspl3 flashing to a radio 2.10 or 2.13 will brick it thanks !
oh yeah this is what i have running on my phone so far http://forum.xda-developers.com/showthread.php?t=843221
Click to expand...
Click to collapse
imei is printed under battery. maybe this help.
criszz said:
imei is printed under battery. maybe this help.
Click to expand...
Click to collapse
thanks i downloaded this stock rom: T-Mobile_HD2_MR_Software_3.14.531.1 i have 1 question after i flash do i still have to remove hspl3 ?
ihateu said:
thanks i downloaded this stock rom: T-Mobile_HD2_MR_Software_3.14.531.1 i have 1 question after i flash do i still have to remove hspl3 ?
Click to expand...
Click to collapse
no. stock rom flashed from sdcard will remove hspl3
ok i dont know how to do it from the sd card why cant i just do it from my pc ? and if it requires that i have to click on something or open it on my phone i cant because the screen is not responsive
ihateu said:
ok i dont know how to do it from the sd card why cant i just do it from my pc ? and if it requires that i have to click on something or open it on my phone i cant because the screen is not responsive
Click to expand...
Click to collapse
do it from your pc , nothing bad could happent.
hi
i have hd2 that want change rom ands radio
but now during upgrade rom always hang on 11%
and finaaly software update fail please try again
please help to repair it.
sirnavid said:
hi
i have hd2 that want change rom ands radio
but now during upgrade rom always hang on 11%
and finaaly software update fail please try again
please help to repair it.
Click to expand...
Click to collapse
Are you using sd card method or upgrading via activesync/winmobil?
yes try with sd card
and try with shippedrom.exe usb+bootmode
please help me
i want update radio also and hang on 30% and now have this problem.
upgrade rom code error please try again
sirnavid said:
upgrade rom code error please try again
Click to expand...
Click to collapse
hey i just hspl my leo and yes it show it correct then i tried with custom rom with sd card method after 100% it doesnt reset itself and when i did it it just stuck at htc logo what happen??
and now worsti just tried with shipoped rom via sd card method and now sayin error code 028002 or something?did i screw up?
saurabh88 said:
hey i just hspl my leo and yes it show it correct then i tried with custom rom with sd card method after 100% it doesnt reset itself and when i did it it just stuck at htc logo what happen??
and now worsti just tried with shipoped rom via sd card method and now sayin error code 028002 or something?did i screw up?
Click to expand...
Click to collapse
If you flashed via sd card method, you need to pull out (remove) the battery because it doesnt reset ifself...
If you fail with sd card method, why dont you just do it via active sync
sirnavid said:
hi
i have hd2 that want change rom ands radio
but now during upgrade rom always hang on 11%
and finaaly software update fail please try again
please help to repair it.
Click to expand...
Click to collapse
have installed HSPL?
Which rom do you have installed?
need more info to solve it ...
After having problems with Android NAND i have decided to move back to win mobile 6.5, so i flash back to 3.14.xxx
every time when i turn off and on the phone its do everything that a first time boot do, after ages when the phone finally gets on all the settings are stock,
any solution for this ?
Did you run a Task 29 before flashing the Win Mo ROM?
T-Macgnolia said:
Did you run a Task 29 before flashing the Win Mo ROM?
Click to expand...
Click to collapse
yes, i did
Hmmm what ROM is it? Is it a official or custom ROM?
T-Macgnolia said:
Hmmm what ROM is it? Is it a official or custom ROM?
Click to expand...
Click to collapse
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Gihanfx said:
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Click to expand...
Click to collapse
Ok that is a official ROM. did you get it from HTC.com using your serial number to confirm it is for your HD2? Also have you thought about flashing it via SD card?
Oh and you don't have to hit the thanks button for every reply but thank you for the gesture.
T-Macgnolia said:
Ok that is a official ROM. did you get it from HTC.com using your serial number to comfirm it is for your HD2? Also have you thought about flashing it via SD card?
Click to expand...
Click to collapse
Ill try and it let you know, Thanks a lot
Gihanfx said:
Ill try and it let you know, Thanks a lot
Click to expand...
Click to collapse
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
T-Macgnolia said:
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
Click to expand...
Click to collapse
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
did everything as in the guide, but still the same problem
Gihanfx said:
did everything as in the guide, but still the same problem
Click to expand...
Click to collapse
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
T-Macgnolia said:
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
Click to expand...
Click to collapse
Thanks again for the Help, after installing the new ROM i got far too many errors, but i restarted the phone so many times and things are back to normal, still when i access google maps the phone restarts and cant access the market place cus the update always fails, i also feel there is something wrong with the memory, anyway thanks again