I flashed JAC's kernel w/ voodoo & colorfix last night, using the back support files, and everything is good. However, I had previously flashed the JI6 modem for the better reception, and the back support files revert the modem back to JI2. Does anyone know for certain if the JI6 modem can now be reflashed without any ill effects? The thread in the Dev. section is silent on this question. TIA.
wbexpress said:
I flashed JAC's kernel w/ voodoo & colorfix last night, using the back support files, and everything is good. However, I had previously flashed the JI6 modem for the better reception, and the back support files revert the modem back to JI2. Does anyone know for certain if the JI6 modem can now be reflashed without any ill effects? The thread in the Dev. section is silent on this question. TIA.
Click to expand...
Click to collapse
Shouldn't pose any issues at all... Ahhh, I see what your referring to. I'm not sure why the official back ported files zip contains the kernel or modem. If you'd like, here's a stand-alone flashable JI6 modem.
slighpcs said:
Shouldn't pose any issues at all... Ahhh, I see what your referring to. I'm not sure why the official back ported files zip contains the kernel or modem. If you'd like, here's a stand-alone flashable JI6 modem.
Click to expand...
Click to collapse
Pass. Thanks. Now it's perfect, pending FroYo when it shall be more than perfect...
slighpcs said:
Shouldn't pose any issues at all... Ahhh, I see what your referring to. I'm not sure why the official back ported files zip contains the kernel or modem. If you'd like, here's a stand-alone flashable JI6 modem.
Click to expand...
Click to collapse
Thanks much for the advice and the link. Works well.
Related
I know there is a CWM flash for kernel back support, and i know we have a stock JFD kernel CWN flash file. My question is, could someone get a JI6 Kernel CWM flash file like we have for JFD?
I know the back support kinda renders this request useless, but still, it's be nice to have the new JI6 kernel in case people are nandroiding between JI6 and JFD for tests and for future uses.
really? no one knows how to do this? Hell, if i have instructions on how to do this, i'll do it. i just don't know where to start.
geoffcorey said:
really? no one knows how to do this? Hell, if i have instructions on how to do this, i'll do it. i just don't know where to start.
Click to expand...
Click to collapse
Flash one of the custom ROM's. i.e. bionix 1.8
It's very easy to create your own flashable zips for any kernel of your choice.
For the JI6 stock kernel pull the zImage from one of the JI6 based ROMs (note - don't use the ones that are packaged with JAC's or KK's kernel). Unzip the stock JFD kernel flashable zip you have (i.e. from the Frankin-Twiz thread) and replace the zImage with the one you just pulled. Rezipp everything and voila you have your very own recovery flashable kernel.
lqaddict said:
Flash one of the custom ROM's. i.e. bionix 1.8
Click to expand...
Click to collapse
Not what i wanted. the custom roms do kernel back support, which i already have the flashable zip for. That gets me no closer to having a flashable JI6 kernel, only JFD kernel.
silow said:
It's very easy to create your own flashable zips for any kernel of your choice.
For the JI6 stock kernel pull the zImage from one of the JI6 based ROMs (note - don't use the ones that are packaged with JAC's or KK's kernel). Unzip the stock JFD kernel flashable zip you have (i.e. from the Frankin-Twiz thread) and replace the zImage with the one you just pulled. Rezipp everything and voila you have your very own recovery flashable kernel.
Click to expand...
Click to collapse
Thank you very much for this. i'll work on it a bit today and test it out. thanks!
I may be trying to do the impossible. If anyone can straighten this out I would appreciate it. On the theory of not trying to fix what ain't broken, the speed of the setup in my sig works perfectly (until FroYo arrives), but the only issues I still have are reception with 3G & the phonecall (hardly ever 4 bars) functions. I looked on the Team Whiskey site and put the JI6 modem zip on my SD card and attempted to flash it through Clockwork. It "appears" to have installed, but when I go to settings>about phone it still shows the baseband version as T959UVJFD. Is it not possible to use the JI6 modem without an "updated" ROM, or is there a way anyone knows of to do it, maybe using ODIN? TIA...
Holy moly I thought I was the only one with this problem but anyways. Just pull the modem.bin out of the zip flash it through odin, in the phone section
Sent from my SGH-T959 using XDA App
Daddy_617 said:
Holy moly I thought I was the only one with this problem but anyways. Just pull the modem.bin out of the zip flash it through odin, in the phone section
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Cool. Nothing in pit or pda?
No I just left that alone.
Edit: to be on the safe side you should flash the 512 pit you can find it in one of the threads. Or do a search for eugene373 2 modem bin something like that. But I didn't use one and it worked fine.
Sent from my SGH-T959 using XDA App
wbexpress said:
I may be trying to do the impossible. If anyone can straighten this out I would appreciate it. On the theory of not trying to fix what ain't broken, the speed of the setup in my sig works perfectly (until FroYo arrives), but the only issues I still have are reception with 3G & the phonecall (hardly ever 4 bars) functions. I looked on the Team Whiskey site and put the JI6 modem zip on my SD card and attempted to flash it through Clockwork. It "appears" to have installed, but when I go to settings>about phone it still shows the baseband version as T959UVJFD. Is it not possible to use the JI6 modem without an "updated" ROM, or is there a way anyone knows of to do it, maybe using ODIN? TIA...
Click to expand...
Click to collapse
There was someone else in the fusion section, that had the same question. Phone said, modem installed successfully, but the status shows JFD. According to the dev, once it says installed it is installed. The status might not show the updated info.
Source : Post number 257
Yesterday, 05:53 PM
* RetweetReTweet this post
* # 257
* report
*
Originally Posted by zaphod_fl View Post
Installed and LOVING Fusion. One question... I installed the JI6 modem but it still shows a Baseband of T959UVJI2. Had LOTS of problems with the JI2 modem. Any thoughts as to why it does not show the JI6 modem?
The baseband version is contained in the build.prop which won't change when you flash a new modem. But if you flashed it, its installed.
Sent from my SGH-T959 using XDA App
__________________
Team Whiskey
Follow me on Twitter
Sombionix - Project Bionix - Lead Developer/Founder
Samsung Vibrant - Bionix 1.9.1 operating @ 1.3Ghz
Donate to my whiskey fund if you like my work
chichu_9 said:
There was someone else in the fusion section, that had the same question. Phone said, modem installed successfully, but the status shows JFD. According to the dev, once it says installed it is installed. The status might not show the updated info.
Source : Post number 257
Yesterday, 05:53 PM
* RetweetReTweet this post
* # 257
* report
*
Originally Posted by zaphod_fl View Post
Installed and LOVING Fusion. One question... I installed the JI6 modem but it still shows a Baseband of T959UVJI2. Had LOTS of problems with the JI2 modem. Any thoughts as to why it does not show the JI6 modem?
The baseband version is contained in the build.prop which won't change when you flash a new modem. But if you flashed it, its installed.
Sent from my SGH-T959 using XDA App
__________________
Team Whiskey
Follow me on Twitter
Sombionix - Project Bionix - Lead Developer/Founder
Samsung Vibrant - Bionix 1.9.1 operating @ 1.3Ghz
Donate to my whiskey fund if you like my work
Click to expand...
Click to collapse
Dude thanks for the info... Lol I odined for nothing
Edit: Well if you do odin it JI6 will show up in your baseband
Sweet! Worked like a charm with no pit or pda. And, it now shows the JI6 in about phone. Thanks to both of youn
Sent from my SGH-T959 using XDA App
JI6 Modem Flash
I recently flashed my modem with the JI6 modem through clockwork.
it said it installed properly but i am getting no data coming through the phone?
Please help
Samsung Vibrant onyx
Hey folks
Well I have had my share of messups with my vzn fsc.
Things are settled now as I have been Ble to figure out the stuff.
So after trying superclen, evilfascination, and community rom I have come to the conclusion that personally (and no offence to no one) I like the stock roms more but without the samsung and verizon bloatware.
Could you great guyz suggest me the best debloated and all stock rom which is smooth to operate, has great battery life and doesnt hVe any known issues.
I would b highly thankful for the help, pl link me to the threads guyz.
Regards
UPDATE : guyz the kind suggestion given my dnoyeb here in the second post is really awesome and i suggest all should try this.
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Click to expand...
Click to collapse
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
bmeek said:
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
lord dredd said:
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
Click to expand...
Click to collapse
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
dnoyeb said:
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
actually updating is gonna be an issue ;P
i am using the handset in India and have added Indian operator's settings in it so update via SETTINGS>ABOUT PHONE >SYSTEM UPDATES aint possible
so practically no way to flash the ed03 i guess
ED01 is not gonna be any issue as i can go back to dl09 eclair of adreyn anytime and then update to ed01 stock through his EA28 and ED01 updates.
after that ed03 ?????? i donno from where and how
if you have any other way of accomplishing all ur stuff then pl help
regards
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Do you have the link to Sbrissen's TSM mod package? And, what is the shortlight package? Thanx!
Do you have the link for Sbrissen's TSM mod? And, what is the shortlight package? Thanx.
Sent from my SCH-I500
Click to expand...
Click to collapse
dnoyeb said:
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
then install aluncher pro on miui
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
lord dredd said:
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
Click to expand...
Click to collapse
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
landshark68 said:
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
Click to expand...
Click to collapse
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
lord dredd said:
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
Click to expand...
Click to collapse
If you followed the steps by dnoyeb, then you are correctly set up on a debloated/deodexed ED01 ROM. Your baseband is the modem/radio and would not have changed after you followed Adrynalyne's post to get to ED01 quickly. You flashed imnuts' ED03 ODIN package which would have given you the stock ED03 ROM and kernel, but not the ED03 modem so you were still at ED01 modem which is fine. Then you followed dneyob's steps to flash the ED01 Debloated/Deodexed ROM which would have changed you to the ED01 build from ED03 build. For all intents and purposes ED01 and ED03 are the same thing. ED03 simply added in a fix for those people who could not receive the ED01 OTA update. The verizon and android both flashing at the same time is just an overlapping boot animation that happened because as I recall you could not do a complete data wipe/factory reset for fear of losing the verizon network while you are in India. So other than that little quirk of the overlapping boot animations, you should be exactly where you wanted to end up - a debloated ED01 ROM and with imnuts' -100mv kernel you should see better battery life if your phone can handle the undervolting.
Congrats!
i guess i did exactly as you have outlined,
i am now gonna caliberate the battery and will revert tomorrow about the backup and stuff
love ya
regards
when i first was learning how to root and flash, the thread for the evilfascination rom taught me everything i know. it does a great job in describing the steps to root and then flash the rom. i personally stuck with the evil fascination because its been so stable from the getgo and i love the overall theme of it. I kept getting peculiar bugs with comrom that i did not know enough yet to try and fix.
I suggest you go to the fascinate android development forum, and read the evil fascination thread.
I updated my post on the first page with links incase anyone else was looking at a quick rundown with links on how to get to a fully rooted / debinged / debloated type setup quickly.
Thanks a bunch matey.
God bless.
sent from my vzn fsc 1474 quadrant score
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Snakehn said:
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Click to expand...
Click to collapse
so you mean u didnt go for debloated ed01 from adryn and not even the kernal ?
if yes then someday i might also wanna try this out, coz as and when i use 3G my battery drains like hell with the debloated setup as well.
would appreciate some more suggestions.
regards
with EA28 and ED04 + PBJ sv 531 kernal i get pretty much good backup and good 3g speeds too.
missed call was the issue which i am trying to solve with softlocker, seems to work
I've been doing pretty well at flashing new roms and thought i had the hang of it. But when I went from a complete stock fascinate > root > Correct Rom manager install > to Cyanogen mod 7 rom. I can not send or receive sms. I have flashed a couple other roms and even the new nightlies for Cm7. Am I missing something? Is it kernel Based?
Sorry for the newbness of it. But I have been working on this for a couple days now.
nikkgmm said:
I've been doing pretty well at flashing new roms and thought i had the hang of it. But when I went from a complete stock fascinate > root > Correct Rom manager install > to Cyanogen mod 7 rom. I can not send or receive sms. I have flashed a couple other roms and even the new nightlies for Cm7. Am I missing something? Is it kernel Based?
Sorry for the newbness of it. But I have been working on this for a couple days now.
Click to expand...
Click to collapse
I would suggest to use Odin to flash recovery, or VZW roms (when starting fresh or returning to stock, or if the rom is made for Odin flashing) and use cwm recovery to install roms, kernels, zip files or whatever and get away from rom manager...it doesn't work well with the fascinate and while some files and recovery's will flash through rom manager you'll save yourself a lot of headaches if you learn Odin and cwm, now....its not hard, you just have to read, and read and read, especially the stickies in the a and a and Dev section. ultimately though I think you're problem is based on using rom manager for you're install.
This will get you on the right track and all off the links for Odin, recovery, and instructions are in the first post.
http://forum.xda-developers.com/showthread.php?t=1124391
http://forum.xda-developers.com/showthread.php?t=1124391
Trying to get the link to work?? May have to copy and paste.
Sent from my SCH-I500 using XDA App
Thank you!
That's what it was, I was under the assumption the radio file had updated and it hadn't. Guess i just missed the error in Odin. I just updated to EC09 and they started working.
Is that the newest radio available?
nikkgmm said:
Thank you!
That's what it was, I was under the assumption the radio file had updated and it hadn't. Guess i just missed the error in Odin. I just updated to EC09 and they started working.
Is that the newest radio available?
Click to expand...
Click to collapse
Yup...glad to hear you got it up and running properly
Sent from my SCH-I500 using XDA App
nikkgmm said:
Thank you!
That's what it was, I was under the assumption the radio file had updated and it hadn't. Guess i just missed the error in Odin. I just updated to EC09 and they started working.
Is that the newest radio available?
Click to expand...
Click to collapse
EC09 has proven to have the best performance with all the GB roms (since it's a modem from the GB vzw leak). But it's not the newest since build date is E=2011 C=march 09th.
good day.
Want to upgrade from Comm rom 2.1 with the voodoo kernel it came with, probably to the recent TSM Resurrection 1.0. Looks like there's another compatible voodoo kernel out, can I flash that first, and then the new rom? Or do I need to undo voodoo and go back to stock, starting from there? Not sure what radio I'm on, baseband says EB01.
Sorry if these questions suck, I haven't upgraded for months. Looking for opinions on best order of operations here is all! Thanks everyone.
kleffman said:
Want to upgrade from Comm rom 2.1 with the voodoo kernel it came with, probably to the recent TSM Resurrection 1.0. Looks like there's another compatible voodoo kernel out, can I flash that first, and then the new rom? Or do I need to undo voodoo and go back to stock, starting from there? Not sure what radio I'm on, baseband says EB01.
Sorry if these questions suck, I haven't upgraded for months. Looking for opinions on best order of operations here is all! Thanks everyone.
Click to expand...
Click to collapse
Odin PWGB 2. 0 which is a complete tar package. Then flash tsm res in Cwm. Then you can choose your kernel and lag fix settings
TSM Resurrection 1.0,TKSGB10-18,XIX,ec09 radio.
This is a question. Questions go in the ......question and answer forum.
To answer your question, these are all bml roms. Assuming that you have an ec09 or later radio you should be able to flash it after wiping data unless the Op of the new rom says that it requires the gingerbread bootloaders.
Sent from my HP Touchpad using xda premium
Damn, figured I would do something wrong, maybe a mod can move this.
Thanks for the tips guys.
laureanop said:
Odin PWGB 2. 0 which is a complete tar package. Then flash tsm res in Cwm. Then you can choose your kernel and lag fix settings
TSM Resurrection 1.0,TKSGB10-18,XIX,ec09 radio.
Click to expand...
Click to collapse
In case it helps anyone, this worked perfectly. I have so far kept the kernel that comes with PWGB2.0 to see how it is, but I miss the BLN tools and voodoo sound.
kleffman said:
In case it helps anyone, this worked perfectly. I have so far kept the kernel that comes with PWGB2.0 to see how it is, but I miss the BLN tools and voodoo sound.
Click to expand...
Click to collapse
Upgrade your kernel to TKSGB 1006(better stability than newer version)and you can get Bln and voodoo sound back
TSM Resurrection 1.0,TKSGB10-06, XIX,ec09 radio.