it wont read it at all and its in download mode and my phone wont go past the big S
if you're getting to the S, you're getting too far.
you have the right samsung drivers?
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
unplug the phone, hold down both volume buttons, plug in the phone, hit power while keeping both volume buttons held down.
what do i do???
Alanrocks15 said:
what do i do???
Click to expand...
Click to collapse
if you have the right drivers, then unplug your device, take off battery, push volume down button, and power button then connect your device and put battery again, and let see if it work. of course open odin and see if read your device.
Related
I was Odining back to stock and then it failed. I turned my phone off then back on and it goes to This sign where is shows Phone caution sign then computer. Way to fix it?
Download mode and odin again
Runnin nero+dow+oclf
Like i can't get into any of that though. I turn my phone on, And i don't even get the Vibrant screen, I get that sign with computer and phone...
LOL
this actually happened to me today.
Pull out the battery.
Hold the vol buttons [up and down].
Have Odin ready.
Plug in your phone. [keep holding the volume buttons]
put your battery back in.
If nothing happens, press the 'on' button [still holding the vol buttons]
Odin back to stock.
remove battery, plug in USB to phone, hold volume rocker and insert battery, if you dont get download plug the USB into the PC
HG! said:
LOL
this actually happened to me today.
Pull out the battery.
Hold the vol buttons [up and down].
Have Odin ready.
Plug in your phone. [keep holding the volume buttons]
put your battery back in.
If nothing happens, press the 'on' button [still holding the vol buttons]
Odin back to stock.
Click to expand...
Click to collapse
for some reason no matter what and how i'm trying to kick it into download mode....it doesnt go.
just loops,
are my hands growing out of my ass or what??
Only hold the power button until the screen goes black
Sent from my GT-I9000 using XDA App
im stuck at the vibrant screen and can not get into download screen help please
How are you trying to get into the Download Mode screen? you may be doing it wrong, list your instructions. be detailed.
power off,pluged in usb, volume down, power then insert battery. this is the fastest way
My old video, at about the minute mark:
kefka6 said:
power off,pluged in usb, volume down, power then insert battery. this is the fastest way
Click to expand...
Click to collapse
power off,
pull battery
put back in
open odin
plug usb to pc
hold both volume buttons
insert usb to phone with buttons still held
2 seconds
download mode.
yup i was doing it the captvate(v up, power) way i have had to fix my friends phone befor and i end doing this thats twice i've done this and posted lol. thanks !!
Well i have bricked my phone once again. I mean this is no big deal, i can get a new one from tmobile. But i have one question to ask. Why does my phone brick when i odin from stock 2.1 to 2.2? I swear its happended to me like 3 times i think. Its the worst, any ideas?
which 2.2 tar file do you use? plus it's most likely just soft bricked...does it turn on, like at all?
No its hard bricked. NOTHING TURNS ON. i have no JIG btw
Want to try to help me?
this happened to me too just try to get into download mode
Try this. It just happened to me yesterday.
!
1, plug the usb cable into the pc
2. Open odin, load everything etc.
3. With the battery out connect the usb to the phone.
4. Hold the bottom button first then the top
4. Slide the battery in and see if that works.
I seriously had a hard brick yesterday, no lights no vibration no nothing. I kept holding both buttons at the same time but it didn't work. I tried the bottom button first like at 3 in the morning and.it worked. Matter of fact odin failed on me like 6 times! It would go up to like the modem or the rfs part and fail contributing to a worse brick until i got it the 7th time. Good luck!
Sent from my SGH-T959 using XDA App
my phone is that way right now... no lights, no vibration, etc... i'm letting my phone sit without the battery right now hoping that this will help before i try to get odin to recognize my phone... thanks for the advice... **fingers crossed**
If you have to
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
nomadrider123 said:
If you have to
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Click to expand...
Click to collapse
Or try that same method, but WITHOUT holding the power button, just the volume rocker (up and down) when plugging into usb. I actually dont pull the battery, simply hold the volume rocker down while plugging in your usb to pc, from a powered down state, and that ought to get it.
Sent from my ZenDroid, meditating on the XDA App
+1 to bricked's method!
Hey guys, I really need your help with this one.
I accidentally reset my Vibrant back to stock using the Odin one-click (I897UCJF6 final) for the samsung captivate. Now I can't go into download mode. I've tried holding the up/down volume button then putting the battery in (vibrant way) and the captivate way with up/down volume button + power button then releasing the power button.
Hold Up and down button, put battery in, then put in your USB cable. Make sure you dont press the power button.
Or
Get a Jig.
Darkakuma said:
Hold Up and down button, put battery in, then put in your USB cable. Make sure you dont press the power button.
Or
Get a Jig.
Click to expand...
Click to collapse
I've tried that numerous times. However, it's not working.
Edit: Thanks for mentioning about "jig". I'm guessing this is my last hope.
Possible remedy
I had a similar problem when working with my friends phone yesterday. I used the boot to download function in the AIO Toolbox app and it worked perfectly.
Good luck.
same thing happend to me kinda. just hold the up volume button only and plug the usb in. thats what i have to do now
Hey so a couple days ago, my phone was working perfectly fine, and I plugged it in for the night. I woke up and wanted to check the time on my phone, but it was turned off for some reason. I tried to turn it back on and it just will not turn on. I've tried a hard reset, and the only response I can get from my phone is when I plug it into my computer and a white light appears at the top of my phone. Is there any way I can fix it, or do I need a new one?
Can you get into AP fastmode?
to get into fastmode, with the phone off, press and hold volume up+volume down+power. If you can, you can restore your phone
If you go into youtube and wearch AP fastboot razr, you can see some vid tutorials that are helpful
APCharlie said:
Can you get into AP fastmode?
to get into fastmode, with the phone off, press and hold volume up+volume down+power. If you can, you can restore your phone
If you go into youtube and wearch AP fastboot razr, you can see some vid tutorials that are helpful
Click to expand...
Click to collapse
If you can't even get into AP Fastboot...i think you'll need a factory cable from Motorola.
Also try to power on the phone connected to the computer - maybe it'll work
when you power on the phone and see the red light...press vol up+down and power...wait till your screen just give a quick flash. then, press power again (don't release volume buttons). If it works it'll take you to the menu where you can fastboot etc