I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
I can only tell you I have exactly the same problem. Using it with Mobilicity.
Let's hope someone will come up with a fix.
A guess is that it has to do with the order in which it is searching to network operators after it loses signal. I am not sure how the phone is hard coded, but it is possible that upon reboot, it checks the SIM for which network to lock on to, but without a reboot it is looking for T-Mobile, because that is hard coded into the phone.
This is all a guess, but perhaps setting it to Manual network selection instead of automatic would help lock it on your network.
^yes, I think if you take it off the auto setting in your mobile network, that may solve the problem. Even though I'm with TMO we had a 3g outage and while it was on auto the same message came up for me, even after the outage was over. Set it to wcdma only, and I was able to make calls and get back on the network.
Setting it to Manual will just force us to do it manually every time it gets disconnected.
Not a solution, unfortunately.
Thanks guys,
Is there an application perhaps that will search for available networks and register on the network of your choosing once found?
Orochi77 said:
I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
Click to expand...
Click to collapse
Where you able to find a solution to this problem? I'm having the same problem. Let me know. Thanks.
+1111111.... i meant plus 1... but yeah ...i'm having the same problem... Vibrant on Mobilicity w/ Froyo Rom from Axurus <-- i think thats how u spell it
Anyways, this happends while im at home, sitting on the same chair as i was when i had the 3G...and then boom..............3g just disappears and doesn't come back til' i restart....
Have you tried setting the mobile network to "WCDMA Only" ?
Mobilicity doesnt have a GSM network.
Related
Hello there I currently have an unlocked vibrant currently on the mobilicity network in Toronto, Canada.
The phone works well, no issues except for establishing and securing a connection with the network provider. Every time I go to an area where it loses service, like parking garages or subways it loses the connection- obviously- but when you get back to an area where there should be service I only connect to the roaming service. This is leading to extra costs since my plan has charges for that.
What I do now is when i go somewhere with no service i switch to flight mode. When i get back where there is service i have to usually turn the phone off and restart it and search for a network manually.
Are there any apps, hacks, or fixes that can stop me from seeing or detecting roaming services, and force the phone to lock on to my network provider's service?
I want to use it only in the current home zones, and if out of one, i accept the fact that the phone does not work at all. I am always in the coverage zone and never want to use it while roaming.
can anyone help?
At the setting, there is an option there Data Roaming, you need to check or uncheck it. Select the option that will prevent you from doing data roaming and that should fix your problem.
On the otherhand, I have a question for you. I have the same phone and same provider, mobilicity. Our problem is the 3g connection. It is spotty sometimes the 3g icon appears and then disappears. Does this happen to you? I noticed the problem occurs when I go under like basement when there is no signal. After resurfacing, I gell signal reception sometimes full but the 3g or data connection won't work. To solve this, we would usually shut down the phone and restart it. Do you experience the same problem? If yes, what was your fix. Thanks.
David
Same problem here. Any guidance will be appreciated.
I've done the suggestions for Wind but to no avail.
same mobile , same provider , same issue
hai guys i have the same issue , but my thing is more worser than you.....when ever i go to an underground parking my 3g gets turned off and wen i come out from that place i cant able to make or receive any calls .....i need to restart the phone to turn on the signal again...its really weird any one have the solution ?????
Hey all, I have a Vibrant on Wind, this is what I do.
Go to settings.
Wireless and Network -> Mobile Network -> Network Mode ->WCDMA only
This enables that you stick to Mobilicity's 3G network and not roam on the Rogers 2G network.
If you lose signal, you will not roam, but simply not be connected until you move out and pick up Mobilicity's signal again.
Hope that helps.
Mobilicity Fix.
I found this on Howard forumns:.... I know this post is old but the solution could help someone who recently bought a old for to get used to customization /flashing.>>> Hope its useful
From Post:
--------
It works!!! It totally works!!!! I love it! Thank you so much guys!!!! Now I don't have to restart my phone EVERY morning as soon as I pull out of the underground garage in my car!!!
Thank you, Thank you, THANK YOU!!!!!!
Dial: *#*#197328640#*#*
Click [1] debug screen
Click [8] phone control
Click [7] network control
Click [2] band selection
This is where you make a change, default setting is [1] automatic, which means it chooses automatically between gsm/cdma (Edge vs 3g). So we are going to change this and set it to wcdma band which is 3g.
Click [2] wcdma band
Click [1] wcdma all []
Now it should display “select wcdma all bands[*]"
Now on the bottom of your phone, click the menu key, it’s the one next to the home key, now click back, menu again one more time, back one more time, this is just to confirm it set to number 2 wcdma band.
Now click menu key one last time, click end.. and you are done. Now to double verify that the phone is locked into 3g, dial in: *#*#4636#*#*
Then click phone information Then scroll down to “set preferred network type” It should now have listed “wcdma only.” PS, if you tried to do a shortcut, and just set wcdma this way first without doing the lock above, it would just go back to gsm/cdma auto once you exit the screen.
Your phone should now be locked into 3g.
----------
Again found on Howard forumns and copied and pasted to word doc. to keep for my mum as she gets the phone.... I got her the the 27.50 holiday plan so she can call anywhere to anyone in North america with unlimited data....coverage is good so far...
P.S. i dont allow roaming as to not incure more charges.
I know this is an oldish thread but.
Trying to fix connection issues and the Dial code does not work for me. It just does nothing when I enter that. The only code that works is *#*#4636#*#* and that does not help me.
Anyone else having this issue and know why it's not working. I have an Amaze 4G. Only posting here about this phone because this is the only thread I could find related to my issue.
Searched all over now. Those codes are to be the only solution and they don't do anything on my phone.
Anyone have answers?
I have a mytouch 4g (it's actually the htc panache) that just suddenly wouldn't connect to the network after I restarted it. When I try to add a network manually, the only option I have is to connect to Canadian roaming...
Aite Ive got two samsung vibrants. Bought them both new. Did the exact same thing on both to unlock them and make em work on AT&T.
One works perfect. The other one just says No service no matter what i do. I tried selecting the network manually but it says sim card doesnt support the network.
Next I tried the odin method to put the stock firmware back on. Rooted. Since my unlock codes werent present on my phone, i used the repair_nv_data fix to try and manually set the unlock code(what i did for the other vibrant), but still no luck. Still says no service when i put the sim in. Weird thing is data kinda works. It says no service but the 3G/EDGE icon keeps popping up and disappearing.
Any suggestions?
Search xda for "enabling the 850 band", id look but search is crap on the xda app. Its my understanding that it works better off of at&t towers with that enabled. Hope this helps.
Sent from my Black Froyo'd, Voodoo'd Vibrant with a gooey Macnut center
Hey so i did exactly what you said but no luck.
Weird thing is im connected to my data connection and can access the market and browser etc. But it still says no service and i cant make/receive calls and texts dont work either...
Really need help guys
Aite so im in india right. Under phone status this is what i get:
Network: Airtel
Signal Stregnth: -93dBm 10 asu
Mobile network type: EDGE
Service state: Out of service
Romaing: Not roaming
Mobile network state: Disconnected
Really need help
Anyone found a solution for this?
I'm having the exact same problem, except I've had my phone for almost a year and just now got this problem. I can use data to browse, twitter, whatever; but can't make any calls. I tried my SIM card on another Vibrant and it works fine; tried another SIM on mine and still get "No Service". Any help will be greatly appreciated.
xgibran said:
I'm having the exact same problem, except I've had my phone for almost a year and just now got this problem. I can use data to browse, twitter, whatever; but can't make any calls. I tried my SIM card on another Vibrant and it works fine; tried another SIM on mine and still get "No Service". Any help will be greatly appreciated.
Click to expand...
Click to collapse
Can't link cuz I'm at the airport lol but go into settings and check if ur imei is correct. If its not, look at my previous posts for the imei fix. May or may my work but give it a shot
Hi
I have my nice new SGS2 but there is no option for network roaming, only data roaming. In order for me to use orange network i need to re-scan and select tmobile/orange, but only get "G" data connection. When i rescan and select Tmobile i get full "H" data connection. Is this normal or am i missing a setting where it will automatically switch. I have set it to automatically but it does not switch between the two. (it's a PAYG O2 handset but unlocked)
Any ideas or will i just have to switch it all the time. Not a real problem as its onyl in my place of work that t-mobile signal is awful yet orange is fine.
Thanks
I think Everything Everywhere rolled out to everyone automatically but by the sounds of it you were missed out. As you're on T-Mobile you can sign up here:
http://www.t-mobile.co.uk/share/
For anyone on Orange, sign up here:
https://kareena.orange.co.uk/signal/
Also, if you haven't ticked the data roaming then tick it! You won't move to any other network than Orange in the UK. Just remember to turn it off when you leave the country.
steve228uk said:
I think Everything Everywhere rolled out to everyone automatically but by the sounds of it you were missed out. As you're on T-Mobile you can sign up here:
http://www.t-mobile.co.uk/share/
For anyone on Orange, sign up here:
https://kareena.orange.co.uk/signal/
Also, if you haven't ticked the data roaming then tick it! You won't move to any other network than Orange in the UK. Just remember to turn it off when you leave the country.
Click to expand...
Click to collapse
Done that but still it does not switch to orange when i have no t-mobile signal. If i do it manually it shows great orange signal....just does not automatically switch...
It won't switch automatically if there is a T-Mo signal available no matter how weak or strong.
Or is there no signal available to you with T-Mobile?
Sent from my GT-I9100 using Tapatalk
sheridan2000 said:
Hi
I have my nice new SGS2 but there is no option for network roaming, only data roaming. In order for me to use orange network i need to re-scan and select tmobile/orange, but only get "G" data connection. When i rescan and select Tmobile i get full "H" data connection. Is this normal or am i missing a setting where it will automatically switch. I have set it to automatically but it does not switch between the two. (it's a PAYG O2 handset but unlocked)
Any ideas or will i just have to switch it all the time. Not a real problem as its onyl in my place of work that t-mobile signal is awful yet orange is fine.
Thanks
Click to expand...
Click to collapse
I can't say for the SGS2 but I can tell you how it is on my Hero, and im guessing it should be same on the SGS2 as its an Android setting ...
If you're on T-Mobile, as I am, then scan your network and select "T-Mobile" only and tick the Data Roaming option. That's the only option you need and it's the only option available. This should then automatically switch over to Orange only when you can't access a T-Mobile signal. You'll know its done it as your network will be displayed as Orange as opposed to T-Mobile.
This is how it works on my phone and it works fine. It should be the same on the SGS2 as well.
Also apparently you'll only get "G" or "E" connections on the Orange signal. That's all they are allowing at the moment.
Hi, I have a Hero and that switches fine but the sgs2 will just show no network when i lose tmobile and not switch to orange. I see that if i get orange manually i will only get "G", its just the automatic switching does not seem to work. Checked tmobile web site and they dont have internet settings for the phone yet, but do have mms/sms settings...maybe in june when they release it they will update the settings and ill be able to down load.
zee54 said:
I can't say for the SGS2 but I can tell you how it is on my Hero, and im guessing it should be same on the SGS2 as its an Android setting ...
If you're on T-Mobile, as I am, then scan your network and select "T-Mobile" only and tick the Data Roaming option. That's the only option you need and it's the only option available. This should then automatically switch over to Orange only when you can't access a T-Mobile signal. You'll know its done it as your network will be displayed as Orange as opposed to T-Mobile.
This is how it works on my phone and it works fine. It should be the same on the SGS2 as well.
Also apparently you'll only get "G" or "E" connections on the Orange signal. That's all they are allowing at the moment.
Click to expand...
Click to collapse
They aim to do 3G roaming at some point in the future but for now it's EDGE only on data.
My network currently (ie when I drag down notification bar) is 'Orange T-mobile'
Sent from my Galaxy S2 using XDA App
Im on t-mobile and mine seems to auto switch without setting anything. A few days ago I remember it saying orange but most the time it says t-moble.
PS: the other day I found out my phone had been emergancy calls only for neely 24hrs the only way i could get signal again was to turn it off and on so dont know if that had anything to do with it messing up when it tryed to change
hello all,
about two weeks ago a flood came through pa and ever since that flood came through the tower by my house is putting off a "bad 4g" or "h+" signal, which my atrix is forced to used, when i make a phone call the atrix drops down to 3g and i can get on the internet no problem and i can get on any other tower no problem, i called att about the problem and they said the tower by my house is in a degraded state and they don't know how long it will be before it gets fixed, to me it doesnt seem to be a priority since the problem only affects those who's phones use the bad h+ signal. I know the phone would function fine if there were some way to drop the phone down to 3g or edge as my wifes captivate works off the sme tower no problem. I have tried the #*#*4636*#*# option - gms blah blah and it didnt do anything to change the h+, i even figured out how to modify the settings under etc/motorala/android.phone/settings.xml to get the network settings ungreyed only to find out that changing the settings to 2g or 3g did nothing to change the h+ symbol, i am running stock rom 2.3.4 att, one thing i did noticed don't know if it is related but the apn's are locked, do i need to unlock my phone to force edge? those of you who have atrix and are able to force edge please let me know how you are able to and weather or not your phone is locked. if at all possible i would like to avoid flashing roms but would be willing to unlock my phone if it goves me the ability to force edge. this is ridicous that att would lock this option out. please help me as having no internet on my phone sucks
*#*#4636#*#* -> phone information -> set preferred network type to -> GSM only -> Press back button to exit out of it.
Do not attempt to change anything else.
anupash said:
*#*#4636#*#* -> phone information -> set preferred network type to -> GSM only -> Press back button to exit out of it.
Do not attempt to change anything else.
Click to expand...
Click to collapse
i Tried that and it did not change the h+ down to edge and when i go back in it is set back to gsm auto/ are your apns unlocked or phone unlocked if this actually does work for you?
apn wap.cingular and set to use 2g only. wap.cingular is edge. hsdpa will be 3g speeds.
i know i thought of that too, except att has locked all of their apns they have a little lock next to them? any one know how to remove the locks or is this the same thing as unlocking the phone?
voltmeter101 said:
i know i thought of that too, except att has locked all of their apns they have a little lock next to them? any one know how to remove the locks or is this the same thing as unlocking the phone?
Click to expand...
Click to collapse
Add a new apn and select it. You can only have one active at any time anyways.
Sent from my MB860 using xda premium
Alcapone263 said:
Add a new apn and select it. You can only have one active at any time anyways.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
There isn't a 2G option in APN settings.
I picked up an unlocked TMo One in New York last week. I used it there with my Norwegian SIM with no problems.
Back home, I get "No Service" using the exact same SIM-card. Using the *#*#INFO#*#*-menu, I can see the SIM-card is recognised because it displays my carrier in the "Current Network" field. I am suspecting the TMo-infused Sense OS to reject my card, since to my understanding the phone is compatible with EU networks. Will i be fine if i flash another ROM, like the stock GPe, and get rid of the TMo-stuff altogheter, or is there another rock in the road here?
I used my Tmobile HTC One with the stock ROM in Norway using a Telenor SIM and in Greece using a Vodafone SIM.
I would make sure you have the proper APN info (I can't remember the appropriate one for the Norwegian carriers). I believe it should work without issues (mine did). If it worked with that SIM card already, it's not locked and it's not rejecting it.
Also, I found that when I returned home to the US, I had to choose Settings -> Mobile Data -> Network Operators and choose Select Automatically (even though it was already chosen). Maybe you need to do that too.
Currently I am running Android Revolution and that also works fine with my Norwegian and TMOUS SIM cards.
Good luck!
Thanks! I've at least made some progress. I tried setting Network Selection to automatic, and got reception, however only for about half a minute. I then tried adding my provider's APN info. This has given me permanent data connection, but still no GSM reception for texts and phone calls. I do get 2g data when in low coverage areas. I am finding this weird. Can anyone shed some light?
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
laberkis said:
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
Click to expand...
Click to collapse
Have you tried taking the phone to your provider? Maybe you need an update which or setting which they can provide.
I find it strange that it wouldn't recognize your phone number, usually that's a sign of some type of incompatibility with the phone and the network.
Sent from my HTC One using Tapatalk 2
I have contacted my provider to see if there's anything they can do. But they're playing a little hard to get.. I was afraid there would be an issue with compatibility at first, by since my data connection is all right, I'm not so sure. Also erdelyt above here says he has used the TMo phone in Norway without trouble. He has another provider, however. They run their own network, so I will be trying with one of their SIM cards next, if my provider NetCom aren't of any help. Thanks for your help so far. I'll be posting my findings further!
So, I got to try a Telenor SIM card the other day, and the issue is still there. Although, with that card the phone number was read and displayed in the phone info menu. The owner of the card suggested there was an unlock issue - but I did make calls with my phone and SIM card in the US, so I don't see how that could be.
So that's a small step further, but now I just have to wait to see what my carrier says..
I changed the title for this thread after my findings.. I got a new SIM-card for my carrier, and i got coverage to make one phone call, but after i hung up, it was gone. I am really in the dark here.. It can of course be a hardware fault, but that's a bit strange for an entirely new product..