Ok, I rooted and remapped the keyboard, and ti works fine, however, in order to get rid of the ugly language bar in landscape mode, I unchecked "default input settings" in the settings and.... they keyboard started acting as finnish/swedish again! When I checked "default input settings" - it reverted to normal. Is there any other file to edit?
ive got teh same problem
hmm since its still trying to grab qwerty-se-fi....what if we replace that with the qwerty-en.xml.
nope no dice
Any other ideas where the keyboard layout might be hiding?
if you uncheck the default input, the system uses the qwerty.kcm.bin file in /system/usr/keychars folder.
to get that replaced by the english layout you have to copy the qwerty-en.kcm.bin file from the /system/usr/keychars/mimmi/keyprints folder up into the /system/usr/keychars folder and save it as the qwerty.kcm.bin file.
i have read this somewhere on the x10 forum. i can't find the topic at the moment.
as i mentioned in another thread, the paths are from android 1.6. they might be different on 2.1.
__________________________
edit: i actually read it here: http://forum.xda-developers.com/showthread.php?t=777660
also, i don't know how to make modifications inside these bin files but would very much like to find out.
go here >
forum . xda-developers.com/showthread.php?t=822050
Click to expand...
Click to collapse
(remove spaces)
i don't know lunux as well, but i use root explorer. just change the properties(rw) and mount first b4 u edit the file. after u edit and save, reopen the file to verify that the changes were saved b4 u reboot.
zanndoth said:
go here > (remove spaces)
i don't know lunux as well, but i use root explorer. just change the properties(rw) and mount first b4 u edit the file. after u edit and save, reopen the file to verify that the changes were saved b4 u reboot.
Click to expand...
Click to collapse
You didn´t understand. This is easy, and everyobody does it. The problems start when you untick the default entry method in keyboard properties. Read carefully first post.
any updates?
ozzy1212 said:
any updates?
Click to expand...
Click to collapse
I downgraded to 1.6 German and will wait for official release. Having a Swedish layout on a German keyboard using English for typing is too much for my poor brains. Meanwhile since you ar on 2.1 can you check the idea below?
thekindladies said:
if you uncheck the default input, the system uses the qwerty.kcm.bin file in /system/usr/keychars folder.
to get that replaced by the english layout you have to copy the qwerty-en.kcm.bin file from the /system/usr/keychars/mimmi/keyprints folder up into the /system/usr/keychars folder and save it as the qwerty.kcm.bin file.
i have read this somewhere on the x10 forum. i can't find the topic at the moment.
as i mentioned in another thread, the paths are from android 1.6. they might be different on 2.1.
__________________________
edit: i actually read it here: http://forum.xda-developers.com/showthread.php?t=777660
Click to expand...
Click to collapse
thekindladies said:
if you uncheck the default input, the system uses the qwerty.kcm.bin file in /system/usr/keychars folder.
to get that replaced by the english layout you have to copy the qwerty-en.kcm.bin file from the /system/usr/keychars/mimmi/keyprints folder up into the /system/usr/keychars folder and save it as the qwerty.kcm.bin file.
i have read this somewhere on the x10 forum. i can't find the topic at the moment.
as i mentioned in another thread, the paths are from android 1.6. they might be different on 2.1.
__________________________
edit: i actually read it here: http://forum.xda-developers.com/showthread.php?t=777660
Click to expand...
Click to collapse
it works
replace /system/usr/keychars/mimmi_keypad.kcm.bin and chmod to rw-r--r--
ps. the attached file is of en layout
magizhang said:
it works
replace /system/usr/keychars/mimmi_keypad.kcm.bin and chmod to rw-r--r--
ps. the attached file is of en layout
Click to expand...
Click to collapse
i'll confirm in a while...
looking for a pc to unzip in...dont know how to open 7zip on a mac...
ozzy1212 said:
i'll confirm in a while...
looking for a pc to unzip in...dont know how to open 7zip on a mac...
Click to expand...
Click to collapse
http://www.wobzip.org/
I strongly suspect that this file will be the same in 1.6 . So what I will try to do - save this file from a german version of 1.6, flash nordic, and install the file from german version.
PS - tested it works.
great!works!
thanks everyone!
@magizhang...where'd you get the en layout?
ozzy1212 said:
great!works!
thanks everyone!
@magizhang...where'd you get the en layout?
Click to expand...
Click to collapse
He could get it only from UK generic 1.6, as I got my german layout from DE generic 1.6
Did you test it as well on 2.1?
works perfect on 2.1!
i'm back to using Swiftkey again!
ozzy1212 said:
works perfect on 2.1!
i'm back to using Swiftkey again!
Click to expand...
Click to collapse
Don´t forget that we will have to repeat this monkey business after every upgrade!
On the other note - I see here people of all nations, from all corners of the world rapidly and efficiently working together and solving all kinds of problems and I ask myself why it doesn´t happen offline in the real life. Makes me really sad.
vlissine said:
Don´t forget that we will have to repeat this monkey business after every upgrade!
On the other note - I see here people of all nations, from all corners of the world rapidly and efficiently working together and solving all kinds of problems and I ask myself why it doesn´t happen offline in the real life. Makes me really sad.
Click to expand...
Click to collapse
or just use a different build.prop again?
well, be happy, we just made it work and whipped SE's ass again!
now to crack bootloader...
Related
laymil has posted a much better script for this. As such I will be discontinuing my work on this for now. Not for any hard feelings, but because it is now beyond me to help any further.
As always I am glad to have helped the community in some small way. Thank you all
CHEERS
Geniusdog254 Posted the exact lines in the build prop that needed to be changed. This is a pretty common fix for problems like this between versions of Android. There was some concern however that you may miss some of the newer apps released only for Froyo. I wrote some simple scripts that will fix this for us.
Simply: One puts the Froyo build.prop on your phone. The other puts the modded build.prop on your phone.
Prerequisites
YOU MUST HAVE GSCRIPT INSTALLED
YOU MUST HAVE BUSYBOX INSTALLED
(IF YOU ARE USING PAULS FROYO ROM FROM HERE
http://forum.xda-developers.com/showthread.php?t=686631
IT DOES NOT HAVE BUSYBOX INSTALLED
Also--
There are now 2 downloads.
One will reboot your phone automatically
One will not!
(I recommend this one for anyone that has problems, or doesn't know ADB well.)
Installation
Code:
Download the attached .zip file
Place the "buildprop" folder in the root of your sdcard
Place both "Normal_Froyo.sh" and "Modded_Froyo" files in the gscript folder on your sdcard
Code:
Open Gscript
Press menu and select Add Script
Press Load File button
Select Normal_Froyo file
Press Save button at bottom
Repeat for Modded_Froyo file
After that all you have to do is open gscript and select which one to run.
Normal_Froyo will give you stock froyo build.prop and let you see froyo only apps
Modded_Froyo will give you the market fix build.prop
You can also create shortcuts directly on your homescreen for each script if you wish
-----------------------------------------------
I've decided to skip the update.zip, I've found no way to copy the scripts to the gscript folder on the sdcard this way.
I'm going for an app instead.
P.S. I've never written an app before, java looks like russian to me lol. So if anyone has any tips, or knows any good tut's let PM me and let me know.
------------------------------------------------
fixed no buildprop folder
added NON-autoreboot download.
buildprop switcher v0.3.zip ORIGINAL
buildprop_switcher_no_rebootv0.3.zip NO REBOOT
buildprop swticher v0.3.1.zip DOWNLOAD THIS ONE
When the file is unzipped, there are 4 files - No Buildprop folder. Now I get the part about putting the two .sh files into Gscript folder.
Do I make another folder called buildprop and put build.2.1 and build.2.2 inside?
OR
Do I put build.2.1 and build.2.2 onto the root of the SDCARD?
Dayz xx
Dayzee said:
When the file is unzipped, there are 4 files - No Buildprop folder. Now I get the part about putting the two .sh files into Gscript folder.
Do I make another folder called buildprop and put build.2.1 and build.2.2 inside?
OR
Do I put build.2.1 and build.2.2 onto the root of the SDCARD?
Dayz xx
Click to expand...
Click to collapse
So sorry lol Didn't notice until I was making the update.zip that I didn't put the other files in a folder IN the zip. Just make a folder on your sdcard called buildprop. and put them in there.
BTW testing the flashable update.zip method right now
thx, seems to work
so no more *#*#etc.. afterwards?
watercool said:
thx, seems to work
so no more *#*#etc.. afterwards?
Click to expand...
Click to collapse
Right.. the checkin service runs on each reboot. So it is not needed.
Worked just fine, but I did have to do the checkin thing. Possibly had poor signal but checkin hadn't done on reboot. Worked fine after that...
Dayz xx
followinginsanity said:
Right.. the checkin service runs on each reboot. So it is not needed.
Click to expand...
Click to collapse
Can the checkin method be used, instead of rebooting? I'd much rather switch back and forth via checkin rather than having to reboot.
Thanks.
Namuna said:
Can the checkin method be used, instead of rebooting? I'd much rather switch back and forth via checkin rather than having to reboot.
Thanks.
Click to expand...
Click to collapse
The reboot is built into the script. On my phone, if I checkin, the apps still don't show till I reboot. But show if I only reboot. If checkin alone works for you though, you can remove the reboot command from the script.
I'm not sure what happened, but after following the instructions exactly, my phone crapped. It got as far as the first nexus logo (non-animated), then the buttons lit up and I got a black screen. And that's how it stayed.
Any ideas?
This worked great for me I also solved my (unrelated) prob with SlideIt by forcing the dictionary to save in the settings, so I'm no longer bothered about losing shortcuts stuff on a reboot.
Dandy!!
tested again with a second n1. works perfect! automated checkin works perfect.
Can you please post what changed in the .prop file.
Also you didn't add the video codecs in the "new" prop file
InGeNeTiCs said:
I'm not sure what happened, but after following the instructions exactly, my phone crapped. It got as far as the first nexus logo (non-animated), then the buttons lit up and I got a black screen. And that's how it stayed.
Any ideas?
Click to expand...
Click to collapse
Mine did this as well, though I am unsure why just yet. Been busy all day.
Mikey1022 said:
Can you please post what changed in the .prop file.
Also you didn't add the video codecs in the "new" prop file
Click to expand...
Click to collapse
The only thing I changed from the stock to the "modded" build.prop were these 2 lines
from this
ro.build.description=passion-user 2.2 FRF50 38042 release-keys
ro.build.fingerprint=google/passion/passion/mahimahi:2.2/FRF50/38042:user/release-keys
to this
ro.build.description=passion-user 2.1-update1 ERE27 24178 release-keys
ro.build.fingerprint=google/passion/passion/mahimahi:2.1-update1/ERE27/24178:user/release-keys
I didn't add anything else to these. If you would like other things added to the build.prop files. You are welcome to edit them yourselves, or let me know what things you want changed, and I can include them.
I can make it user friendly. With descriptions for each modded line, then you can simply un-comment the options that you want.
PS: I thought I had the flashable update ready, but the update-script is giving me problems. ANYONE that wants to help please let me know. I'd really like to get this out to everyone.
InGeNeTiCs said:
I'm not sure what happened, but after following the instructions exactly, my phone crapped. It got as far as the first nexus logo (non-animated), then the buttons lit up and I got a black screen. And that's how it stayed.
Any ideas?
Click to expand...
Click to collapse
same thing here....ANY IDEAS????????????
This is a great find, inductions were perfect and easy to follow. Not one issue getting all my paid apps back! Thank again!
JDMSirEK4 said:
same thing here....ANY IDEAS????????????
Click to expand...
Click to collapse
To anyone that can't get thier phone to boot all the way after doing this
Its not a big deal. Your phone booted. But the build.prop didn't get copied before the reboot.
If you did a nandroid before you tried it. Restore that!
If you didn't, OR you know how to use adb. Do this
Code:
adb remount
adb push [COLOR="red"]/path/to/build.2.1(or)build.2.2[/COLOR] /system/build.prop
adb reboot
I hope to have this fixed quickly.
ANYONE WHO'S PHONE WILL NOT BOOT AFTERWARDS!
Check and make sure you put the files in the right place.
build.2.2
&
build.2.1
go in
build.prop FOLDER ON YOUR SDCARD
that was the only reason I got the error, i deleted the files off my card when i was testing the flashable update.
If you still get an error. open both files in the gscript folder, and remove or comment out the reboot line. Then tell me what error you get in gscript.
So I did this and am able to see the new apps. When I reboot the phone I cannot see a bunch of old apps in my launcher. I revert to the normal script and reboot again and still cannot see a bunch of my apps. Appbrain says theyre installed and I can open them from there but no widgets or shortcuts for them Any Ideas?
r0adki111 said:
So I did this and am able to see the new apps. When I reboot the phone I cannot see a bunch of old apps in my launcher. I revert to the normal script and reboot again and still cannot see a bunch of my apps. Appbrain says theyre installed and I can open them from there but no widgets or shortcuts for them Any Ideas?
Click to expand...
Click to collapse
Are those apps moved to the SD by any chance? If so, best bet is to go to Settings>Applications>Manage Applications>Find your launcher, and force stop it. Should work after that.
dictionary said:
Are those apps moved to the SD by any chance? If so, best bet is to go to Settings>Applications>Manage Applications>Find your launcher, and force stop it. Should work after that.
Click to expand...
Click to collapse
Nope they're not on SD. I'll try the fc of launcher.
Ok it worked thank you! but my xiia widget still is not back and I'm assuming others. Anything I can do for the widgets?
Ok installed and reinstated the app. Works great thx again.
Update:
Ok after another reboot, apps don't show again. FC the launcher they come back but not the widgets.. Grrrrrr...
.
Move here!!
.
what do u mean by apply the registry file? just click on it or copy to such folder?
thanks a lot, i tried your cab on a different thread and it did not work, but this method does! Secure box is very cool i will post more after i flood my inbox!
yeah i work on this version all the day
Happy to see it works!
aurangzeb said:
what do u mean by apply the registry file? just click on it or copy to such folder?
Click to expand...
Click to collapse
No just double click on it (with reso it works no idea for different file explorer) and you can change registry!
G-ThGraf said:
No just double click on it (with reso it works no idea for different file explorer) and you can change registry!
Click to expand...
Click to collapse
i need to find that u are using
Just search Resco Explorer! (and resco registry if you need to modify the registry !
hmmm....i still cant click that file using resco file explorer2010....any solution?
aurangzeb said:
what do u mean by apply the registry file? just click on it or copy to such folder?
Click to expand...
Click to collapse
I just use PHM Registry Editor, and click on the little lightning bolt, than click import, and locate the .reg file and click ok...
aurangzeb said:
hmmm....i still cant click that file using resco file explorer2010....any solution?
Click to expand...
Click to collapse
Install resco registry
jdmsohc22 said:
I just use PHM Registry Editor, and click on the little lightning bolt, than click import, and locate the .reg file and click ok...
Click to expand...
Click to collapse
Yes oder solution!
i think i have done it now...using sk tools registry explorer,import then just click ok...
aurangzeb said:
i think i have done it now...using sk tools registry explorer,import then just click ok...
Click to expand...
Click to collapse
If all works, you've done it!
G-ThGraf said:
If all works, you've done it!
Click to expand...
Click to collapse
yes..all is work fine...but a little lagy maybe because i`m using this application onto my Samsung Omnia 2 device with HTC Sense.
anyway this version is faster than the other i`m used before
aurangzeb said:
yes..all is work fine...but a little lagy maybe because i`m using this application onto my Samsung Omnia 2 device with HTC Sense.
anyway this version is faster than the other i`m used before
Click to expand...
Click to collapse
Oh great!! What is lagy, the loading of message?
I did everything per instruction, and after the final soft reset I couldnt get Sense back up..?? A bunch of my other icons weren't working as well... I'm on a Touch Pro 2, CDMA with Energy ROM's newest 6/11/10 build...
jdmsohc22 said:
I did everything per instruction, and after the final soft reset I couldnt get Sense back up..?? A bunch of my other icons weren't working as well... I'm on a Touch Pro 2, CDMA with Energy ROM's newest 6/11/10 build...
Click to expand...
Click to collapse
you mean, sense doesn't restart?
Registration Entries
Hi, I would like to try this but in your installation instructions you mentioned Registration entries twice, but I olny found one reg file in Secure Box Activation Zip is this the correct procedure
1 Install Messaging Client
2 Where is the reg-file?
3 Copy MUI to Windows
4 Copy reg-file from Secure Box Activation Folder
I am not sure about step two could you make it a little clearer for me please
Thanks
zjxpot said:
Hi, I would like to try this but in your installation instructions you mentioned Registration entries twice, but I olny found one reg file in Secure Box Activation Zip is this the correct procedure
1 Install Messaging Client
2 Where is the reg-file?
3 Copy MUI to Windows
4 Copy reg-file from Secure Box Activation Folder
I am not sure about step two could you make it a little clearer for me please
Thanks
Click to expand...
Click to collapse
.reg is in first zip i already verify it! In all .zip there are a .reg!
So install the cab, apply the .reg for HTC Messaging client,
replace mui and then apply second registry (named activation of secure box)
to apply a .reg use resco explorer (with addon resco registry)
G-ThGraf said:
.reg is in first zip i already verify it! In all .zip there are a .reg!
So install the cab, apply the .reg for HTC Messaging client,
replace mui and then apply second registry (named activation of secure box)
to apply a .reg use resco explorer (with addon resco registry)
Click to expand...
Click to collapse
Thanks I got it working, thanks for sharing
G-ThGraf said:
you mean, sense doesn't restart?
Click to expand...
Click to collapse
exactly... I disabled it through the Today Screen settings, applied all the settings, when all was done I went to reapply it and the box checks off, but when I close Today Screen settings, sense doesn't enable... Than when I go back into settings, it shows it still unchecked..??
REQUIRES ROOT ACCESS
If you want to change your boot animation, its easy.
1. Download Root Explorer off the market (which costs like 3 BUCKS)
2. Inside root explorer, press button up top "MOUNT R/W"
3. Download your bootanimation.zip
4. Extract the bootanimation.zip.
5. After you extracted, you will find another bootanimation.zip inside the one you just extracted.
6. Move the .zip into system/media. (Delete or Backup the original inside)
7. Long click the zip once you moved.
8. Go to permissions.
9. Tick all boxes.
10.Reboot and Enjoy!
Any Problems PM me and i will edit this thread. Thanks all
The same occurs when you do it with a computer program such as Droid Explorer.
this method works for 2.3.3 as well?
a.monteiro said:
this method works for 2.3.3 as well?
Click to expand...
Click to collapse
Yes, it works..
With instruction #6 I recommend: copy the original first to a secure folder on your SD-card, so as to be sure that, when something goes wrong, you can get it back...
Greetz,
kwarkje
EDIT: Question: do the bootanimations for 2.1 work on 2.3.3? Anybody knows that?
#9 found that the original one ticked R&W of the Owner line and Read of the other lines.
is it OK to tick all boxes?
kwarkje said:
EDIT: Question: do the bootanimations for 2.1 work on 2.3.3? Anybody knows that?
Click to expand...
Click to collapse
I think it's ok.
made an bootanimation by myself.
the script of bootanimation is generic.
kwarkje said:
With instruction #6 I recommend: copy the original first to a secure folder on your SD-card, so as to be sure that, when something goes wrong, you can get it back...
Greetz,
kwarkje
EDIT: Question: do the bootanimations for 2.1 work on 2.3.3? Anybody knows that?
Click to expand...
Click to collapse
It's just a boot animation- nothing harmful so I doubt it wil effect your system.
The worst would be a very pixelated and slow boot animation if your desired boot animation is for LDPI (Lower Def) Devices.
do you know how to change the zdzihu's boot logo?
I'm quite sick with that ugly face(sorry for this, but I still respect zdzihu)
does that mean have to edit the RAMDISK?
Alphading said:
do you know how to change the zdzihu's boot logo?
I'm quite sick with that ugly face(sorry for this, but I still respect zdzihu)
does that mean have to edit the RAMDISK?
Click to expand...
Click to collapse
I think i answered you're question already on private messages, but for other people with this question, just switch to an alternative like doomkernel, ThKernel etc.
You can always use this tool to change the bootanimation
quick question.
my bootanimation is the bios one i founf on this forum
did all i had to do and it works on my X10
BUT,
it doesnt load completely i get the (enter pin code) frame before its finished.
what i did was delete some pictures in the zip (the double frames (pics that look the same))
and renamed em all to follow in sequence seeing im pretty new to all this and wasnt sure if it was needed.
now its loading a bit further in the pictures cause i see more changes in the X time its loading.
now my point is can i edit/do something to make it finish and THEN enter the pin code or ? did i do something wrong.
uploaded it with total commander .. the permissions you talked about i didnt do that is that root explorer only or ?
thnx in advance
Bjornlindekens said:
quick question.
my bootanimation is the bios one i founf on this forum
did all i had to do and it works on my X10
BUT,
it doesnt load completely i get the (enter pin code) frame before its finished.
what i did was delete some pictures in the zip (the double frames (pics that look the same))
and renamed em all to follow in sequence seeing im pretty new to all this and wasnt sure if it was needed.
now its loading a bit further in the pictures cause i see more changes in the X time its loading.
now my point is can i edit/do something to make it finish and THEN enter the pin code or ? did i do something wrong.
uploaded it with total commander .. the permissions you talked about i didnt do that is that root explorer only or ?
thnx in advance
Click to expand...
Click to collapse
Sorry I'm not an expert in that field, sorry I don't know how to deal with that. Yeah the permissions are for root explorer but if another program supports permissions in that form, them it's for that other program as well.
Cheers
since I can not post directly in the discussion, I have to open a separate thread.
I used the file for dual touch using insmod and it worked.
Now I wanted to make sure that it is fixed with the phone, I read the procedure and tried to follow her, but I do not find any files bulid.prop ....
Where is it?
Please help me.
build.prop is in
root, system folder
tell me if it works for you, I tried this and I couldn't get it to work.
Ray_jai said:
build.prop is in
root, system folder
tell me if it works for you, I tried this and I couldn't get it to work.
Click to expand...
Click to collapse
using it without changing the files, it works QuickPic, Copilot.
In google maps does not work. Not even in browsers like Opera or Ninesky.
But I thought that by modifying these files, worked in the rest.
Thanks! I found the file "build.prop",
Where is the other file "hw_config.sh"? Because what I found I had no voice "insmod" ...
DomusX10 said:
using it without changing the files, it works QuickPic, Copilot.
In google maps does not work. Not even in browsers like Opera or Ninesky.
But I thought that by modifying these files, worked in the rest.
Thanks! I found the file "build.prop",
Where is the other file "hw_config.sh"? Because what I found I had no voice "insmod" ...
Click to expand...
Click to collapse
hw_config.sh is in ur "etc" folder... are you using root explorer???
You do know you can use the search function OF the root editor too...
DomusX10 said:
using it without changing the files, it works QuickPic, Copilot.
In google maps does not work. Not even in browsers like Opera or Ninesky.
But I thought that by modifying these files, worked in the rest.
Click to expand...
Click to collapse
Not sure what ROM you're using, but you may need this file to get the other apps using dualtouch:
http://forum.xda-developers.com/showpost.php?p=13497850&postcount=49
teapea said:
Not sure what ROM you're using, but you may need this file to get the other apps using dualtouch:
http://forum.xda-developers.com/showpost.php?p=13497850&postcount=49
Click to expand...
Click to collapse
this is the problem?? I've Stock ROM 2.1update1 with firmware 2.1.1.A.06
then, I have to create that file and copy it into /system/etc/permissions with rootexplorer...
now I try this...and you know I do!
EDIT: NOT WORKING...I have create that file (copy and paste the code in the frame in a txt file, and renamed android.hardware.touchscreen.multitouch.xml) then I've paste it into /system/etc/permissions and associated it permission rw-r-r
rebooted and not working...single touch.
yet launched from the console does the dual touch working in some applications ... why?
EDIT 2: Please do not send me to hell, but by creating the file and rebooting, if I launch "insmod" from the console, dual touch works in all apps!
How is it possible, however, that the changes to make it start with phone not work?
I want to work "even" when I restart the phone!
Did you try this version?
http://forum.xda-developers.com/showpost.php?p=13498769&postcount=56
I couldn't get it to work when doing it manually. but when I load it from the SD card through adb it works.
I ended up using the AAIS script and replacing the module in the AAIS with the one in the link.
Ray_jai said:
I ended up using the AAIS script and replacing the module in the AAIS with the one in the link.
Click to expand...
Click to collapse
I use that on the first post dedicated at my firmware 2.1.0.A.06
http://forum.xda-developers.com/showthread.php?t=1064558
manually loaded by terminal emulator work in every app. But, the procedure to autorun this module with telephone when start, don't work.
I do not know which is doing a script AAIS, because I'm not well prepared ... I do not know how to do it ...
use this.
http://forum.xda-developers.com/showthread.php?t=951274
Ray_jai said:
use this.
http://forum.xda-developers.com/showthread.php?t=951274
Click to expand...
Click to collapse
thanks!
With this script you can enable and disable a lot of things ... I can just see if it works ...and let you know ...
I wanted to ask, but what is JIT? what does it do?
thank you in advance for availability ..
EDIT: Works!!! without launching the script, I went just to see how the command was written in the file "hw_config.sh" ...
I corrected, and after restarting, it works!
I was wrong because we put the quotes, but no need to write.
The correct lines of code to be included in the file "hw_config.sh" (at bottom) are:
# load multi touch driver
insmod /system/lib/modules/cy8ctma300_ser.ko
sleep 1
After you have copied into system/lib/modules "cy8ctma300_ser.ko" , mounted it as rw-rr , and edit the file "build.prop" as indicated in the post.
works!!!
thanks!!!!
I'm running newtoroot's senseless 4.0.3 and am loving it. The one problem that was bugging me was the fact that there was no dictionary accompanied with the keyboard, and it would say every word that you typed is incorrect. Well I found a fix.
1. Download these two files: LatinImeGoogle.apk & LatinImeDictionaryPack.apk
2. Put the apk's onto your sd card
3. Copy the apk's
4. Navigate to /system/app and paste the apk's into the directory
5. Rename (or delete) the file titled "LatinIME.apk"
6. You now have a working dictionary for your keyboard!
zZDave_Stud said:
I'm running newtoroot's senseless 4.0.3 and am loving it. The one problem that was bugging me was the fact that there was no dictionary accompanied with the keyboard, and it would say every word that you typed is incorrect. Well I found a fix.
Click to expand...
Click to collapse
Awesome. You rock, dude.
Many thanks good Sir!!!
WHere can I find other language dictionaries?
Dude, you rock! Thanks so much for this, worked like a charm on my Samsung Skyrocket (i727) running leaked ICS.
Cheers!
Got it thanks mjones.
iceman4357 said:
I must be having a brain fart moment. I tried with astro and root explorer and it says the system/app is a read only and will not let me copy them over. Help?
Is this an adb only mod?
Click to expand...
Click to collapse
Go to /system/app in Root Explorer and hit the R/W button.
You're very welcome everyone!
Not installed on my phonr
Sent from my LG-P990 using xda premium
Spell check does not work with the Russian language, with only five standard languages.
Additional dictionaries can only work correctly with auto-correction
Apparently, the spell checker uses the same dictionaries as the auto-correction, but to check the spelling was not announced additional languages
Who can tell about this problem? ;-)
I can't seem to paste nor rename the default apk file in the /system/app folder. I checked the SU, and ES Explorer has been granted the (root) permission.. What did I do wrong??
Sian said:
I can't seem to paste nor rename the default apk file in the /system/app folder. I checked the SU, and ES Explorer has been granted the (root) permission.. What did I do wrong??
Click to expand...
Click to collapse
In ES, use the menu system to remount as R/W then try again. Even with root you're still limited to a read-only file system unless you do that.
Sent from my ADR6425LVW using XDA
Dude, you are the man. Mad props on this one.
zZDave_Stud said:
1. Download these two files:
2. Put the apk's onto your sd card
3. Copy the apk's
4. Navigate to /system/app and paste the apk's into the directory
5. Rename (or delete) the file titled "LatinIME.apk"
6. You now have a working dictionary for your keyboard!
Click to expand...
Click to collapse
I tried it, buy ni my case it doesn't work
before this try, my tablet was sign almost every words in red (except some name, or some word)
now, my tablet, doesn't make any king of spelling check :-(
but the "automatic correction" is enabled in the system setting
Why? some one can help?
is this the reason why swype doesnt give me a choice of words anymore?
Thanks!
Took me a while to get r/w to system/apps but once there the T9 and massively irritating underlining of every word has gone.
Awesome thank you so much.
Tnks
Works also with Spanish Dictionary Tnks
-----------------------------
Muchas Gracias
Thanks for LatinImeGoogle.apk & LatinImeDictionaryPack.apk and the instructions!
Solved the problem on my iDeaUSA CT702 / YG A777 tablet running Android 4.0.3
Thanks for you post! Just fixed a Nitro HD w/ MIUI 2.9.29 rom with your files. Much appreciated.
not working
I have a Motorola Xoom FE, just got ICS today. tried this fix and it did not work. I was getting an operation error on the delete/rename. I went back in mounted after R/W and it still wasn't allowing it. Suggestions? All these red lines are driving me bananas....