Please excuse my lack of experience on the matter.
But my main confusion comes from after a couple hours well of reading and yet still not quiet understanding.
I'm buying a HD2, but I'm interested in converting it over to the Android platform.
However after watching countless videos and reading endless posts - I think I've scared myself into a not knowing where to start now.
I initially came across some pretty cool links wish sounded helpful (and for the most seemed pretty straight forward)
<Examples>
youtube.com/watch?v=3gUwaJYWrdc
youtube.com/watch?v=Gqedm-sUBc8
youtube.com/watch?v=W6Thh-zHGgo
But then confusion after reading of things like finding out the best radio software suited to my region (which by the way is Trinidad), and HSPL3 and the ROM... I am wondering if I might just end up bricking my phone.
So I found out what the stuff means (as seen below) - but I'm still kinda well overwhelmed.
spl = Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
sspl = soft spl (this allows you to flash another spl or hardspl).
hardspl = hard spl .. basically it allows flashing of any rom. It protects you from bricking your device. If you have a bad flash it just forces the phone to load into bootloader, from where you can flash another rom using pc or storage card to get your phone working again. Using a hardspl you can flash any carrier rom without cid unlocking your device first.
radio is the part of the rom which manages the attena
Please if anyone is able to shed some light on the best way of me going about brining in the android OS to my HD2 - it would be greatly appreciated (given what ever the lastest most stable build would be)
Regards...
Also, whats the possibility of a dual boot straight from the phone?
people have reported that android works on stock roms so there might not be any need to flash a custom rom....... apparently a radio newer than 2.08.xx..... is required......
See this thread for that debate.....
Even if there is then all you need to do is follow the instructions in the Rom development section stickies and you cant really go wrong......
If you have a tmous hd2 then you might want to follow the instructions in the tmous section to avoid any potential radio mismatch problems......
Running android is as easy as putting a folder on your SD card and tapping two files in the right order........
Ok there might be quite a bit of trial and error in finding a build you like/works well....
And yes there are programs out there that will give you the option to choose between WM and Android on startup.....
personally I'd reccomend mskips version which you can find in the themes and apps section.........
Happy fiddling......
Thank you so much for the post and for the link you included to the guide.
I have seen a lot of useful information from just there alone. It's appreciated.
One thing I didn't quite follow however, was when you said 'tmous' hd2.
I'm assuming this is an abbreviation for a carrier of some sort?
The one I'm supposed to be getting is an unlocked version btw...
tmous = (T)-(Mo)bile (US) version as it has the 1GB ROM in it; the Euro version only has 512MB.
TriniKing_CE said:
Thank you so much for the post and for the link you included to the guide.
I have seen a lot of useful information from just there alone. It's appreciated.
One thing I didn't quite follow however, was when you said 'tmous' hd2.
I'm assuming this is an abbreviation for a carrier of some sort?
The one I'm supposed to be getting is an unlocked version btw...
Click to expand...
Click to collapse
As br0adband said above, tmous just refers to the american version of the HD2,
its easy to spot as it has a big fat double chin, tmobile written under the earpiece and green/red buttons to dial/hangup.......
if thats the version that you end up with then you should make sure any rom/radio your flashing is "tmous compatible".......
the wrong radio can kill it....... just stay away from anything with ".51." in the name.....
Good luck for when it arrives...... expect a lot of late nights tweaking.......
if you are sure you'll use android, why do you buy a windows phone?
i think thats nonsense...
just buy a desire hd and be happy.
DN41
DN41 said:
if you are sure you'll use android, why do you buy a windows phone?
i think thats nonsense...
just buy a desire hd and be happy.
DN41
Click to expand...
Click to collapse
+1...That makes no sense. Unlike the rest of us, we bought the HD2 knowing what it was all about, then later found that Android would be possible later.
Buying HD2 a year later knowing that you want to convert to Android is silly. Or it is because the HD2 might be cheaper than the newer HTC Anroid phones?
You have missed most of the fun there was in seeing the HD2 develope; from custom ROMs, to Cookies Home Tab, to Android etc etc. Jumping in now after all the blood, sweat and (tears) has taken place probably wouldnt provide you with the same level as enjoyment as I believe that the HD2 is running out of steam. Although there is the possibilty of WPS7 on NAND plus Android to consider.
The main reason for opting for the HD2 is that the price is alot more reasonable for me at this time. The specs are obviously better on the Desire HD and while the original Desire also already has the android platform, their prices are a little more steep for me as they came out just this year alone.
So during my searching around I came across this thread titled:
[GUIDE]The ULTIMATE n00bs guide to the HD2-HardSPL, Android, ROMs, Radios and more!
http://forum.xda-developers.com/showthread.php?t=808015
It seemed really detailed and what not - However, it clearly stated that it was solely for the T-Mobile (US Version) and not Internationally Unlocked ones.
Is there a similar thread where this might be found?
I don't see why it should be specific to the tmous, the only thing to watch out for is the potential radio mismatch... .
Sent From 1998 Via 56K Dial Up
Ok so within the this time which I am still just eagerly anticipating the arrival of my HD2 (which by the way is my first smart phone ) - I've continued to read more threads and posts, but some confusion still seems to exists on the various topics for terms for me.
For instance - I seem pretty clear on the fact that getting an android build on my HD2 is as simple as picking a ROM and then extracting the files correctly to my SD card and run the CLRCAD & the Haret files. - So then why I am still so confused...?
I think the main reason stems from a fear of not wanting to destroy my first modernized phone.
But aside from the basic process I briefly stated above, I have no idea what would be required of me to make the best of my modd-ing procedure.
I have seen links including a 1GB data.img dowloand - what is this for exactly?
I have read and understood that there are advantages of implementing HSPL on your device - but how does it fit into the already 'simplified' 4 step process listed above whereby you just download, extract and run the 2 files?
(...further to that whats the difference between HSPL, HSPL2 & HSPL3 - aside from updated versions I assume, would there be a reason for opting to use an older version?)
How do I determine if I am going to need to change my Radio version from what would already be included within a ROM I select? - and similar to my HSPL inquiry
(What's the main difference between the radio versions?
Wouldn't the highest number [most recent version] be the best?)
Further random (yet related...) questions:
RUU - Would it be necessary or make modd-ing any easier?
cotulla - Is this a single developer or a developer group?
NAND - Is this basically the main memory which holds the OS? - If so is there an actual way to now startup with Android on the HD2 - without WM starting at all and without any user interaction what so ever?
And finally...
When I eventually get my HD2 in hand, is there any information or details specific from my phone, which if provided could make it a easier to receive help on my goal?
If someone takes time to answer my questions - Thanks much in advance!
TriniKing_CE said:
Ok so within the this time which I am still just eagerly anticipating the arrival of my HD2 (which by the way is my first smart phone ) - I've continued to read more threads and posts, but some confusion still seems to exists on the various topics for terms for me.
For instance - I seem pretty clear on the fact that getting an android build on my HD2 is as simple as picking a ROM and then extracting the files correctly to my SD card and run the CLRCAD & the Haret files. - So then why I am still so confused...?
I think the main reason stems from a fear of not wanting to destroy my first modernized phone.
But aside from the basic process I briefly stated above, I have no idea what would be required of me to make the best of my modd-ing procedure.
I have seen links including a 1GB data.img dowloand - what is this for exactly?
I have read and understood that there are advantages of implementing HSPL on your device - but how does it fit into the already 'simplified' 4 step process listed above whereby you just download, extract and run the 2 files?
(...further to that whats the difference between HSPL, HSPL2 & HSPL3 - aside from updated versions I assume, would there be a reason for opting to use an older version?)
How do I determine if I am going to need to change my Radio version from what would already be included within a ROM I select? - and similar to my HSPL inquiry
(What's the main difference between the radio versions?
Wouldn't the highest number [most recent version] be the best?)
Further random (yet related...) questions:
RUU - Would it be necessary or make modd-ing any easier?
cotulla - Is this a single developer or a developer group?
NAND - Is this basically the main memory which holds the OS? - If so is there an actual way to now startup with Android on the HD2 - without WM starting at all and without any user interaction what so ever?
And finally...
When I eventually get my HD2 in hand, is there any information or details specific from my phone, which if provided could make it a easier to receive help on my goal?
If someone takes time to answer my questions - Thanks much in advance!
Click to expand...
Click to collapse
ok, where to start..... lol
il answer briefly because im posting from my device.....
your 4 step process is solid. no problems there.
you cannot brick your device with android.
the data.img is basically a file that pretends to be the phones internal storage, so if you download the 1gb file when you run android your phone will think it has 1gb of internal storage (things will obviously just be stored on your sd card, it doesn't actually affect your devices memory)
theres not much point worrying about the radio until you get the device and see which one you have, chances are it wont need to be changed.
unless your changing the rom/radio you wont need to use hspl
cotulla is widely regarded as being the driving force behind these kind of things, obviously there were/are lots of talented people involved but cotulla is probably the name your most likely to see being mentioned.
ruu - software tool that alows you to flash a rom.
included with stock roms, custom roms require a custom ruu but it is usually bundled in with the rom
nand - you pretty much nailed it, its not yet available though
when you get the device post the info from the settings - about phone/software info
hope that helps and sorry if I missed anything.....
Thanks a lot for your response!
conantroutman said:
ok, where to start..... lol
when you get the device post the info from the settings - about phone/software info
Click to expand...
Click to collapse
After my long anticipated wait - It has arrived.
Here are my initial specs:
OS version
5.2.21892 (21892.5.0.89)
Manilla version
2.5.20121412.2
ROM version
2.13.531.1 (90963) WWE
ROM date
04/28/10
Radio version
2.10.50.26
Protocol version
15.39.50.07U
Any advice?
Your Radio is above the minimum requirement for linux to boot so you're good to go. Download an android build you like the looks of from the Android Development section and extract the Android folder and place it in the root of your SD card.
Run CLRCAD then HaRET or get an android boot loader like THIS, THIS, or THIS to make the process easier.
Okay so after using my HD2 a bit on and off over the past 3 days or so - switching between Windows & Android, I'll summarize:
First off, the android build which I am currently running off of my sd card is:
darkstone HD2Froyo v1
Release date: 26.07.2010
Its pretty decent and all but, I have a problem that I keep on encountering and I'm not quite sure whether its just me (something I didn't figure out) or if its an incompatibly issue with my current WindMo ROM (2.13.531.1 (90963) WWE) or something. Or maybe just a glitch / bug in the build itself
I can't seem to get back access to my desktop at times once I open a browser (or some other apps / games as well); even after I attempt to close it off.
...One just simply reopens once I close off the last one...
This inability to regain access to my desktop at that point means I have no further access to any further applications either unless I start over. (or unless its an app which was previously opened - as I can then hold down the home button to see recently (previously) opened apps.
I'm wondering if I should try another build? (any suggested ones?! / any known problems with this build)
Also as my version is an unlocked T-mobile phone - would it be wise to follow through with an upgrade on the ROM from T-mobile's site?
T-Mobile HD2 MR Software (Version 3.14.531.1)
http://dl.htc.com/ruudownload/t-mobi....aspx?pid=leo2
EDIT:
I'm also the following message constantly and I'm thinking it might have something to do with the problem I'm getting.
This version of LauncherPro Beta has expired. Please go to http://www.launcherpro.com/ to get the latest version.
No suggestions...
I was simply copping some music across from my pc to HD2 with ActiveSync and I think I didn't d/c properly. Now my HD2 won't start up.
It just freezes on the Stick Together screen
(which contains the ROM, Radio info below)
I attempted to reset with the small red button, I tried pulling the battery completely. It still just comes back to that screen once I place the battery back in and FREEZES.
Attempted to go into bootloader by:
Taking out the battery. Placing it back in.
Press volume down, while pressed press the power button.
The colored screen comes up:
PBB1120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Someone please HELP!
Related
Is there anyway that is 100% safe to upgrade or is there always some amount of risk that a unit will end up a brick ?
I've read so much here and on other forums my head spins lol. I was like all set to just do it and then I got the phone lol, now I'm getting cold feet because I read so many people have bricked their phone.
Also can the SPL be done by SD card or does it need to be done with a computer ? I know some will say do a search, I have and man there are so many choices is there just a page or link with a simple idiots guide ?
Its better to do all the upgrading through a PC. Its more safer than SD Card upgrade.
Simple way
Do the HardSPL first then do anything you want. Try to look for Mr.Vanx guides
I agree with beastfellow, install hardspl first then you can flash any hermes rom you like. I have flashed my heremes over 50 times,i even flashed it 12 times in a week as long as the roms you have have no radio or spl in them then they should be fine to flash. Just make sure they hermes roms you are flashing.
hardspl can be downloaded from here http://pof.eslack.org/hermes-unlocker/
guide to how to do it is located here
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
other guides and there links can be found here
http://forum.xda-developers.com/showthread.php?t=299462
anyway my advice is to go for it. I have only ever bricked one device and that was a wallaby back in the day.
good luck and make sure you read EVERYTHING ,twice if you have to
Dalork,
I felt exactly the same way as you a couple of years back. What I did was to read every scrap of info I could find, constantly assessing the risk, while looking for a stable rom.
Key criteria for my rom search was what other people were saying about that rom (good and bad) and the developers willingness to resolve issues. In the first instance this led me to Schaps and his brilliant roms. For my rom history see my signature.
Read the following threads very carefully, then read the threads on one rom from Schaps and, say, a rom from Kin0ken. Look at the 6.0 roms, NOT the 6.1 versions...
http://www.mrvanx.org/thg/
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes.
Also use these search tools:
wiki - http://www.google.com/advanced_search?q= +site:http://wiki.xda-developers.com&hl=en&lr=&as_qdr=all
forum - http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
entire xda site -
http://www.google.com/search?q=site:xda-developers.com
Once you are fully genned up then prepare your kit carefully, e.g. make sure your phone batttery is fully charged, then upgrade your rom as you logically and carefully work your way step by step through Mr Vanx guides.
First time I upgraded I had the Mr Vanxguide open on my desktop PC whilst I ran the rom upgrade off my laptop. Using the laptop meant that in the unlikely event of a power cut (does happen where I live) I wouldn't instantly end up with a bricked phone.
Good luck and PM me if you need help/any further info.
Cheers
WB
Thanks for the help folks, I'm just worried I'll brick it as I have a friend who tried this and his is a nice paper-weight now.
I must be getting confused as I thought doing the flashing direct frm the SD card was the safest ?
Anyways, I'm not certain at this point which is the best or safest ROM to go with. I was going to do the Hard-SPL-V7 (2.10 Olipro) and was think of the Schaps_WM6Pro_Hermes_4.31_WWE_Full.
ATM the unit has ROM 1.30.707.4 8/22/06 and Radio 1.20.31.10
I don't think it's ever been flashed as yet as the bootloader is IPL-1.01-SPL-1.06
ask your mate if i can have his paper weight i have a nice rock to swap for it
scousemartin, lol I had already asked him that before I bought my dopod as I was hoping to come here and find out if it could be fixed.
Another point, after upgrading the phone to say WM6 or whatever can you still recover/reload the original factory WM5 system/set-up ?
I guess I'm in-fact quite happy with how the phone is already I just really want to be able to use a 8GB Micro SDHC card so I can load more programs and music. I don't know if any of the radio ROM's will improve my signal as such but battery life seems to be ok already. Used the phone quite a bit today, started off with 80% battery and finished off tonight with still having 70%.
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
ultramag69 said:
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
Click to expand...
Click to collapse
Thanks heaps for that, and I agree I did think flashing from a SD card would be safer as there is no risk in USB/sync problems, no cable to bump...etc..etc... But then I'm a total newbie, what I think doesn't always make sense lol.
If I just do the Hard-SPL-V7 and then something like Schaps_WM6Pro_Hermes_4.31_WWE_Full and don't do the radio ROm is there really much chance of bricking the Dopod ?
While I say I'm not bothered with upgrading the OS and everything else, it's mostly because I'm **** scraed of bricking it lol. I guess it would be silly to say I wouldn't like the better features of a decent upgrade, I just have to get my head around it somehow. But I WILL need more space as I really like to put lots of music on it and some games/apps. Hence the SDHC, I'd like 4GB but would love 8GB as I doubt I'd ever run out of room then.
As it is with my current phone I have 3 x 1GB cards which I just swap around and I hate having to do that and I'm always losing/misplacing the damn things.
If you are SERIOUSLY thinking of upgrading, Hard SPL your phone. You can find the thread "Hard SPL or how not to brick your Hermes" in the upgrading section. Its best to do this as it is the safest we thing you can do. It won't prevent a brick but it makes it a lot more fixable. I have never bricked a phone that I couldn't fix (yet) with Hard SPL on it.
Its fairly difficult, I find bricking the hermes when using the sd card method, as long as you make sure you have Hard SPL, Unlock your Hermes(if needed, did this as wasn't sure) and make sure your battery is charged.
Unlock before putting Hard SPL on though as it downgrades the SPL to 1.10 olipro.
Also use Hard SPL ver.7 (should say SPL 2.10 olipro after upgrade) as ver 9 is the developers SPL (says SPL 2.60) and throws up error messages (if done from the pc) after flash.
As for the rom, no-one can say what is best... What is suitable for me may not be for you. If you ask this questiopn on a thread you'll be inundated with "This rom is best..." remarks. Search and you will see.
Hope this shines some light on the subject (forgive me if this seems scattered, too much caffeine and not enough sleep), anyway,
Cheers....
Thanks for the info and it does help/shed light on it. I have read heaps of info about most everything here, maybe more than I should have even to sart off with lol. I would normally not have been so concerned except that I have a friend close by who tried this exact way of flashing and still somehow bricked phone. Though he did say with folks help here he did get the unit working again but the radio never worked again I think he said.
I already downloaded a copy of Hard-SPL-V7 and Schaps_WM6Pro_Hermes_4.31_WWE_Full.
Not certain if this is the right one for me or not but seems alot of people like it and find it stable. I also grabbed this HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship though I'm not certain if it's any good or not. I haven't grabbed the unlocking file, not sure I need it or not. With flashing the Hard-SPL-V7 by sd card am I right in what I have read that all I need to do is rename the nbh. file and not the RUUWrapper_exe.
I am finding it difficult to get the Dopod to use 3G for web browsing/email though. But someone told me that the original set-up/ROM wasn't much good for the Optus/Virgin 3G network.
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
ultramag69 said:
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
Click to expand...
Click to collapse
You got me really confused now lol, I thought I only needed to run the Hard SPL and then whatever ROM I liked (was looking at ones without radio ROM's). Also do you think it would be wsie to flash it with a radio stack for Telstra when I'm using Virgin as it seems Virgin is using the Optus network.
Sorry if I sound daft just the more I read the more confused I'm getting. Also it seems that everyone does have a different opinion on how and what is best. Just want to work out what is best for me before I have a go at bricking my phone lol. I've not found setting up SMS/MMS hard at all. Seeed pretty easy, having most my trouble setting it up for Virgin's 3G access for web browsing. Just can't seem to get it to work, got it set-up for wifi at home no drama but don't really need web access from the phone when I'm at home and have several computers.
Sorry, Information overload...
1. CWW Enterprises Aus Operator Con.cab - this cab file does a quick loading of sms/mms setting on the phone. You can use ANY rom and then setup your messaging with this. First however, install 2.
2. ARCSoft MMSComposer cab - This allows the use of mms on your phone properly. Some roms don't seem to set up your mms properly. If you have this installed then run 1. it will fix it all up.
I believe it should fix up ALL settings (including the 3g ones) as when you flash a rom, no native settings are kept and I've never had trouble using 3g after installing 1. and 2. then running 1. (will be in programs). It will soft reset your phone after setting it up.
Confused...
Really, just find the rom you want, check in settings as some have an auto network wizard to set this up. I just like CWW Enterprises Aus Operator Con.cab as it was made by an Aussie to use here. Its good when you don't have the network setup wizard (lite roms generally don't come with the frills)
Hope this clears it up....(preferably like glass and not like mud)
Cheers...
I am intrested in buying a Hermes, most likely the unbranded HTC tytn that I believe comes all unlocked.
For that one the procedure is the same still, right?
Hard spl install and choose rome you like
I have seen eithe Schaps 6 or the newer 6.1 with diamond stuff in it
So would I have the same procedure. To find the hard spl (not sure which version to install) and then find the rom w/out a radio?
es_bih, yes. Its the same procedure. Instyall Hard SPL ver 7(ver 9 is the developer one. It tends to throw up an error after upgrading via pc, no problem though).
As for the rom, make sure its a hermes rom. Any you find on this forum are for the Hermes BUT if you go to the other forums (herald, kaiser, etc....) the roms will brick your device as it isn't compatible with your device. Cooked roms are good but until you get to know the vagaries of wm6.1 I'd suggest to stick with wm6. Its more stable than wm6.1. Play with that and then when you are confident enough to try, then go for wm6.1.
Most if not all cooked roms come without a radio rom.
Cheers...
Tried doing the Hard-SPL-V7 on Vista x64 computer and get error 260 problems.
Tried on a XP laptop and got a different option. The first screen that comes up after running the RUUWrapper.exe not only give me the choice of "Force SSPL" but also allows me to tick "Is this Hard SPL ? "
In the guides I've been reading it says you should only get the "Force SSPL". So my question is seeing as I have the option of ticking "Is this Hard SPL?" should I ?
Installing Hard SPL? Tick SSPL. After that you can pick either.
Hmmm, can't seem to get it to do it. Sounds so simple I must be missing something somewhere. No matter what I try I stillget the ERROR 260 (update error)
Hi all
I've had a search through the re-developed ROM's and to be perfectly open, I don't understand much about them.
I recently had a plain HTC HD2 and very happy with it for what I use it for, I don't need any fancy add on's and bits etc, just my Co-pilot and keeping my contacts and notes upto date.
That handset was lost and the insurance didn't have any HD2 replacements in stock. The Desire they sent instead has been sold, and I've purchased a T Mobile version of another HD2.
Is it a simple case of downloading and installing the official HTC ROM for the handset and doing a ROM update?
Apologies if this is a simple query etc!
Cheers, Dennis!
no, no no nonono.
assuming you mean a tmobile us model (1024 rom, green send key) then no, if you flash a non tmous stock rom (any stock rom that isn't for the tmous) onto that phone it will die. brick. dead, because of the ..51.. radio they include.
You may get some cooked roms that are on a base of lower than 2.x, but have been tweaked for the 576ram , and they will work on your phone, but its a very risky game to play.
Far better to follow the two rules..,
only ever flash tmous stock roms,
and
cooked roms that SPECIFICALLY say tmous compatible in the title and post 1 of that roms thread..
Hiya
Samsamuel, thanks for the info there. I'll update with more information! I'm technical, but not with smartphones to the level some of you guys here!
I'm in the UK, and it's a UK TMobile handset that I bought. I've already had the handset 'unlocked' so that I can use my O2 SIM, which is working etc.
From the handset
OS Version - 5.2.21889 (21889.5.0.87)
Manila Version - 2.5.20121429.0
ROM version - 1.72.110.4 (86525) WWE
ROM date - 04/02/10
Radio Version - 2.07.51.22_2
Protocol version - 15.32.50.07U
So, would it be ok to update to the normal HTC ROM?
Cheers, Dennis!
Ah ok in that case there is no need to mention that it is a t mobile phone, just confuses the issue.
Yes the regular update will work fine once happy is applied.
Thanks once again SamSamuel,
However, what's meant by 'once happy is applied' ?
Is that one of these hacks or special ROM things?
When I do a search, so many results come back containing the word 'happy' I have no idea where or what to look for!
Is there a thread which explains how to apply 'happy'?
Apologies for the vagueness!!
Cheers, Dennis!
lol, thats the android spell correction and me not proof reading before i post. should be HSPL
Hiya
To me, anything that's typed up 'could' potentially be what I need to do! I wouldn't know the difference!!
So, I've had a search for HSPL - I see it mentioned, but alas, I have no clue what it is, where to get it from, what to do with it when I get it!
Is there any straightforward points on what and where to get this HSPL, how to use it ?
I know I can download the HTC official ROM from their website, so that part I think I know what to do as I upgraded my last HD2.
Cheers, Dennis!
ok, hspl. Get HSPL2_RUN.zip from HERE, (you can follow instructions that say hspl or hspl3, theyre all the same, except for what phones they support, , hspl2 is teh most usefull for regular hd2 owners)
phone into bootloader and connect usb, (when you read 'get an active sync connection', , forget that, it doesnt mean actual active sync, just a usb connection)
get hspl2, run it, in the dropdown is a list of spl and hspl versions. if it ends .0000 its stock, if it ends .hspl its,,,,,, hspl.
choose 2.08.hspl, follow the prompts. if it doesnt work, run the hspl prog again, if it still doesnt work (timeout/connection errors) change usb ports and try again. no need to touch teh phone, just leave it in bootloader all the time.
once bootloader says spl 2.08.hspl you are good to go.
BUT
if you are planning to flash the 3.14 rom, , , you can't do it this way.
3.14 wont work on any spl/hspl except 3.03.0000 and there is no way to get 3.03.0000 except goldcard.
Hiya
Samsamuel - seems you're the only one willing to help me here! so I really appreciate it !
I know i've got to do 'things' from what you've said there, but I have no idea on how to do it! - give me some financial IT related stuff I'm good! ask me to do bootloaders and potential goldcard and run files and connect - I'm lost! I don't want to try things in case I 'brick' the handset!
The ROM I want is listed on the HTC downloads section for the HD2. It's dated 25th January 2010
Details are
ROM Version:
Norway:1.66.409.1, Spain :1.66.412.1, Denmark:1.66.403.1, France :1.66.406.1,
Sweden:1.66.413.2, Italy:1.66.408.1, WWE:1.66.405.2, France Bouygues: 1.66.483.0
So, if I somehow manage to do this HSPL thing, will I not be able to install the HTC ROM? I have no idea where or what the '3.14' ROM is?
Apologies for sounding really vague - I've never got into all the modified ROM's and stuff for smartphones. I've only ever needed to switch on, use the phone, install my GPS software and keep my contacts and notes syncronised. I'm just used to the HD2 I had as it was a case of straightforward use. This T mobile version is 'different'!
Anyone else able to help alongside everything SamSamuel has kindly provided so far? please?!!
Cheers, Dennis!
warning
Its best for you if you do not try to update your phone. Either get used to it or just sell it. There are rom update tutorials on this site. Just search for rom update tutorial, if you must try. The official htc software is not for this phone, if you install it, your phone will no longer work, and you wont be able to fix it.
No, its ok so long as you have a regular hd2 locked to t mobile as discussed in earlier posts.
Just to double confirm, if your phone has green send key,then STOP DANGER
But I think we're dealing with white send key, so normal hd2, and the target Tom isn't 3.14
So,,,
assuming white end key.
Phone backed up and off
Press hold keep holding volume down
Tap and release power keep holding volume down
When striped coloured screen appears
Plug in USB
On PC run hspl2
In dropdown choose 2.08.hspl
When it completes and phone starts to reboot immediately hold volume down again to return to stripey screen (bootloader)
When says USB at the bottom and split at top says 2.08.hspl run the .exe you downloaded from HTC
If you get connection errors, timeouts, leave the phone and just swap USB ports. When running hspl.exe right click it and "run as administrator"
(That's the last time I'm gonna write those out in full, there must be 500 identical step by steps and half as many YouTube vids. )
If your send key is green DO NOT DO THIS
Hi guys,
Mods - first time post and im not a regular user so if im breaking the rules i apologise. I have spent hours already trawling the forums, but i am now admitting defeat and I need your help!
My Problem:
I have an x7501 SPL 1.06 0000, WM 5.0, GERMAN OS
I want to upgrade this to WM6.1 ENGLISH
I dont care what the SPL is, as long as it works, is reliable, and wont disable any standard WM functionality
I am not interested in tweaks, hulks, or other (non standard) tricks, i just want to get the device running a stock WM 6.1 rom
That said - if you guys think that going to 6.5 is the best (non beta, no risk) option, then im quite happy to go that route.
$50 reward to the first person who provides the following info IN A FORMAT THAT I CAN UNDERSTAND. im good with computers for a non pro (and can follow instructions , but this is just over my head!
I Need:
1) Link to an unlocker and instructions how to use, that will give me the required SPL (note my SPL is 1.06 - will this require two SPL flash steps??)
2) Link to a stable ROM that retains all windows functionality, and instructions how to use it.
If i find that i used two or more peoples help i will split the reward accordingly!
thanks in advance and keep up the good work!
Alan K
First you need to download the unlocker from this thread and follow instructions... http://forum.xda-developers.com/showthread.php?t=315831
This will give you SPL 1.2
Here is a handy thread with step by step instructions on upgrading your roms you should read through before beginning to flash...http://forum.xda-developers.com/showthread.php?t=429013
Unfortunately, the stock-like wm6.5 roms made by michy-prima that ran on spl1.2 are no longer hosted on any sites anymore. I can try to contact him for you and see if I can get a copy directly from him. I will see if I can do that.
Otherwise, you can change your spl to 3.5, which you might as well do anyways, as there are more roms for that spl and even the stock-like michy-prima roms were made in spl3.5 also, so if I can get those, I will get the spl 3.5 versions.
So to then change your spl to 3.5, you must have first used unlocker to make spl 1.2, then the only way that was made to change spl to 3.5 was to flash the Athena Project 4 rom, so go to this thread... http://forum.xda-developers.com/showthread.php?t=387409 and download the AP ROM V.4, unzip it, and run the flasher while your phone is connected with active-sync to your computer. This will install the spl3.5 and the AP4 Rom.
Now that that is done, you can choose any SPL3.5 ROM to flash... (make sure to only flash SPL3.5 Roms now... if need be, there is a way to go back to SPL1.2 if you need to, but there really is no reason you would need to.)
Probably the most modern rom with the most features would be the AGB Version 3.00 ROM, The Hulk one (I know you said you didn't want that, but it is the most current rom, and you can easily change the theme and wallpaper on it. This is the ROM I have on my Athena... its a nice ROM.) Here is the thread for that ROM... http://forum.xda-developers.com/showthread.php?t=614158
Just unzip the rom after you download it, and like before, hook phone up to computer and let it sync, then run the installer. You can also use the ealier AGB roms, too, if they look better to you, or any rom you come across as long as it is a spl3.5 rom.
And I will try to contact michy-prima to see if I can get one of his old clean wm6.5 roms or his stock wm6.1 roms, but I wouldn't count on me being able to get one from him. Personally I think the newer AGB ROMs are alot better and more recent and updated and would recommend using them.
Also, here is a convenient thread I just found that has links to many different builds and useful tools and guides... http://forum.xda-developers.com/showthread.php?t=397518 ... so if you want to try out a couple wm6.1 while you have spl1.2 or even after flashing spl3.5, as a lot of roms are made for both spls. Just make sure you only flash roms made for the spl that you have on your phone.
I hope this helps... if you have any more questions, feel free to pm me and I'll be glad to help. Happy flashing!
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
bigalk said:
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
Click to expand...
Click to collapse
Like I said, if you have any more questions or problems, feel free to ask here or pm me.
Sent from my HTC HD2 using XDA App
Also, if you prefer to have a winmo 6.1 ROM over the 6.5 ROM I suggested, there are links to many 6.1 ROMs in that last thread I linked. Here's the link again... http://forum.xda-developers.com/showthread.php?t=397518
MichyPrima's roms are no longer hosted, but I have heard good things about Taxists and Sogarths ROMs. You can easily try a rom and then flash another if you don't like it. Just remember, make sure to flash roms for the spl that you have. If you have SPL3.5 and want a spl1.2 rom, there are links to the tool to change back to spl1.2. The only way to go from spl 1.2 to spl 3.5 is to flash the Athena Project 4 ROM, then after that you can flash any spl3.5 you want. Let me know if you have any other questions or concerns.
Hi Zarathustrax,
just to let you know - i still havent managed to allocate time to this yet.
I havent forgotten about you, and im not pulling a fast one!
thanks again for your time and effort!
Al
Hi Zarathustrax,
In the very first step (unlocker link) Olipro says "follow the steps...."
I cant see the steps he mentions anywhere? This is one of the reasons for my original post
any ideas?
Al
Forget my last question - unlocker has the steps!
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
Hmmm... might be. I'll look into this and see if I can figure anything out.
Oh, by the way, sorry I missed your messages until now. I don't check these forums daily, so if you need to contact me quicker, send a private message to me.
bigalk said:
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Click to expand...
Click to collapse
I've been reading through the forums trying to find an answer... at what point does it show this error? Is it right away? Does the x7501 change screen at all or do anything? I think I remember having problems like this when I unlocked it years ago... but can't remember exactly what I did. Does the x7501 go to it's tricolored bootloader screen at all? It maybe is having problems installing usb drivers while it's in bootloader mode if it changes into bootloader mode when you get that error. Let me know asap so we can get this solved. Also, have you tried using another cable at all?
Putting phone in usb Mode
Try installing Enablerapi.cab before using the olipro unlocker.
Are you still on this
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
chappatti said:
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
Click to expand...
Click to collapse
I'm kinda thinking he gave up or something.... I've pm'ed him and have been trying to get more info on his problem for a couple weeks. I think he was having the problem on the first step... and the enablerapi will probably solve his problem.
But doing all this reading and trying to solve this problem has got me to pull out my old athena and start playing with it again... it's been a couple years since I've used it... I'm on the HD2 now, dualbooting WP7 and android.... but I've gotten an interest in getting my athena set-up and working again. The athena was way ahead of it's time.... if we could get devs interested in it again and get a good android build ported over, it would make an awesome tablet/phone. I think I'm gonna try to play around with getting android booting on it, but my knowledge of linux and low-level kernel work is limited to none. The best I can do is try to put together a build with what kernels/tools are already out and working on the athena, which isn't much. I think they had it booting and got touch screen working, but not much past that.
Hi zarathustrax,
no i havent given up . was checking in regularly to see if i had any response from you but never even looked at the pms. sorry.
i have a few hours to crack into this now so ive set up on a new machine (different av and firewall) and im going to have a go.
will report back - thanks for all the additional info my man!
al
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Well. I'm not an expert (my Ameo was unlocked as I bought it) but if I understand, the black screen is because the ROM on your device dont match the new SPL you have. Try to flash a new ROM (SPL 1.2, right?) should help.
bigalk said:
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Click to expand...
Click to collapse
Just replied to your pm before checking this thread, so I see that you can still get to SPL bootloader screen. So, what you should be able to do now is get your phone to bootloader screen and hook it up to pc like that. Then let any drivers that are installing finish, and where it says "serial" at the bottom should change to "USB".
At this point, you can now run a custom rom installer and flash a new rom. Since you want to change to SPL3.5, you should install the Athena Project 4 ROM.
Or if you want to leave it at this SPL for a while and test out a couple WM6.1 ROMS that use this SPL, just flash one of these. Here's a good thread that lists almost every ROM available with links and says what SPL they're for... http://forum.xda-developers.com/showthread.php?t=397518
I'll do a little more research also about the screen not coming on to make sure it's not some other problem, but it probably is just the current rom isn't compatible with the new SPL.
I'm sending this post to your pm too.
Also, make sure you have the SD card and sim card removed when doing flashing. And check what radio you have on your phone... you must have atleast radio 1.50 or higher to use Athena Project 4 or most WM6.1 or WM6.5 ROMS.
Hi,
I am working on getting my HD2 ready for WP7 + Android dual boot. I read that in order to make sure the Darkstone RAM SD build works properly with WP7 you need an already configured version of it. The current version I have is broken so i'm trying to get back to windows 6.5 so I can configure a new Darkstone build and upgrade everything back to WP7 + Android again.
Anyways, I'm stuck at the downgrading. I've downloaded both originals roms from the forum here and from htc.com and tried to run the from the bootloader (not the magldr but the red/green/blue thingie)
I keep getting the error about incorrect ROM versions. I tried to downgrade my radio to 15.26.50 but doing so resulted in the same error. My current radio version is 2.15.50.14
The HTC ROM i downloaded is named: RUU_Leo_S_Vodafone_NL_3.14.172.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship so my guess is that should work fine with my current Radio version.
Now i did read this: http://forum.xda-developers.com/showpost.php?p=14182187&postcount=3 and it sounds like a very possible solution but I can't quite figure out what i should do on the phone. The bootloader doesn't give any instructions, but perhaps he meant magicldr?
I'm quite lost here and I think i would have already bricked my phone twices if the HSPL3 didn't had a good check (From what i've read on the forum)
Did you really follow all the steps from the link you posted?
Especially if you get the "wrong ROM" message, did you use your serial in order to find out which ROM is the correct one for you?
Another question: What SD card do you use? If it´s bigger than 2GB, it tends to make problems. Try a smaller one.
I've managed to follow the steps after all using http://forum.xda-developers.com/showthread.php?t=681317 (Was searching in magldr at first). At one moment the screen turned black for a quick second with a warning sign and started over again? Now it seems to be finished. Guess stupid me made a post too fast after all.
I was using a 4GB class 2 SD and i figured the HTC rom is based on my serial because i had to insert it before downloading.
Windows mobile 6.5 seems to be running smooth now so I can continue with my evil dual boot!
Hi all!
Trying to put all the noob-questions we had in early days and possibly link them to the available solutions. This might take some time to grow and update so do help where you can and help me edit where you think info is wrongly updated.
New! Featured thread for fun
Show off your photography skills using Titan's camera - Panorama, burst, Thumba photo editor.. your choice!
http://forum.xda-developers.com/showthread.php?t=1457286
There are 4 posts with sub-categories. This should cover most of the most discussed topics in Titan General forum.
Noob questions and User reviews
Bugs/ Issues known to affect only some Titan users
Unlocking the Titan: Unleash the dragon
Past-issues that have workarounds or solutions and Hardware talks
General
1) If you are new to Titan and feel like sharing some info please vote. Just to know what sort of Titans are being owned. Nothing fancy.
- http://forum.xda-developers.com/showthread.php?t=1375018
2) Important STICKY link if you missed it!
Titan Wiki - http://forum.xda-developers.com/showthread.php?t=1388441
3) I am switching from Android, did any of you switch at all? How did you find it?
http://forum.xda-developers.com/showthread.php?t=1379120
4) Are there any difference between AT&T v/s non-branded versions?
Please follow these threads:
http://forum.xda-developers.com/showthread.php?t=1352523
5) File transfer (office documents from PC to Titan)
http://forum.xda-developers.com/showthread.php?t=1443817
User Reviews
1) Can someone please share their experience with Titan?
There are few excellent reviews already here by XDA members. You can also find plenty on internet. Here are the links for XDA member reviews:
* http://forum.xda-developers.com/showthread.php?t=1309175
* http://forum.xda-developers.com/showthread.php?t=1372056
* http://forum.xda-developers.com/showthread.php?t=1377743
* http://forum.xda-developers.com/showthread.php?t=1288786
* http://forum.xda-developers.com/showthread.php?t=1414457
*http://forum.xda-developers.com/showthread.php?t=1480182
Issues/Bugs - may or may not affect all of us
1) I have issues with voice quality of Titan, do you have it?
Some users have reported it for some handsets. Generally one of the solution that has worked is covering the top-mic with a finger. This mic is intended for voice correction but at times makes conversation muffled. Try that. If that doesn't work, we don't know more solutions yet. Try these threads-
http://forum.xda-developers.com/showthread.php?t=1372881
2) Autobrightness, is too bright for me!
Known bug - http://forum.xda-developers.com/showthread.php?t=1410130
3) Wifi issues
http://forum.xda-developers.com/showthread.php?t=1364627
4) Titan keeps rebooting/resetting.
* http://forum.xda-developers.com/showthread.php?t=1388232
* http://forum.xda-developers.com/showthread.php?t=1339185
Screen issues
1) Gloves don't work at times - http://forum.xda-developers.com/showthread.php?t=1370165
2) Landscape mode issues - http://forum.xda-developers.com/showthread.php?t=1383904
3) Low battery and touch screen - http://forum.xda-developers.com/showthread.php?t=1363463
4) Ghosting on Titan's screens, do you have it?
http://forum.xda-developers.com/showthread.php?t=1365567
Marketplace
1) I can't download marketplace apps while on 2G/3G but wifi works fine!
One of the possible solutions - http://forum.xda-developers.com/showthread.php?t=1363400
2) I don't have AT&T apps in my marketplace, I am AT&T customer, I promise!
A hard reset will fix this issue. It's known to occur for some users - http://forum.xda-developers.com/showthread.php?t=1369016
Cool, but I have a bug that's not even listed here! WTF!
You can help a XDA member by listing it here - http://forum.xda-developers.com/showthread.php?t=1410529
and hopefully we can send it to HTC for help?
Unlocking and custom ROMs
Understand Windows Phone unlocking first
1) Can I unlock Titan?
Chevron method - no more unless you have a token. - http://labs.chevronwp7.com/
Developer unlock - $99 - http://create.msdn.com/en-US/
Student developer unlock - free - https://www.dreamspark.com/default.aspx
Flashing a custom ROM - voids warrantly but give FULL unlock (for details keep reading).
All of the above will let you sideload apps with usual limitations in number of apps you can sideload (3 for student, 10 for other two).
However, certain apps that need Interop capabilities won't be able to sideload.
2) Can I Interop Unlock Titan?
Yes - full unlock with interop unlock by flashing custom ROM.
However if you don't want to flash a custom ROM, there isn't one for stock ROM yet. Follow these threads:
http://forum.xda-developers.com/showthread.php?t=1271963
http://forum.xda-developers.com/showthread.php?t=1407652
3) Are there any custom ROMs for Titan?
Yes at the moment there are 3 excellent ROMs (as of 5th June 2012). Please donate for the first HSPL + Full ROM on the bounty thread.
There is a bounty thread - http://forum.xda-developers.com/showthread.php?t=1445304
4) Can I force update my Titan?
Yes but please read the thread first - http://forum.xda-developers.com/showthread.php?t=1306415
5) Can I SIM unlock my Titan?
Yes possibly - http://forum.xda-developers.com/showthread.php?t=1379252
How to flash a custom ROM on my Titan?
At the moment things are a little tricky for AT&T customers, but not impossible. A detailed step-by-step debranding, HSPL instructions guide is this one.
All other Titans are easy to flash, but be careful. It is totally your own risk to take. First we need to flash SPL on your phone. Then HSPL and then phone is ready to run custom ROMs. I will try and break it down for you in brief.
Use this excellent thread for DFT HSPL
Follow the instructions for Titan.
You can enter bootloader mode by first switching off your phone. Then press vol + and vol - keys together with power on button. Once the phone starts with white screen and letters in green, blue and red you know you are in bootloader.
Now connect the phone with cable to your PC. Wait for the PC to install drivers. It will tell you once it has successfully installed everything.
Then when it says 'Run SPL' you literally need to click on the "ROMUpdateUtility" - usually about 1.4 or 1.5 kB in size. MAKE SURE YOUR PHONE IS CHARGED AS INSTRUCTED AND STAYS CONNECTED TO LAPTOP AT ALL TIMES.
Once your SPL is flashed, you need to do the same with HSPL. Then same with custom ROM. In each of these folders you will find "ROMUpdateUtility" that you need to run one after the other. It's that easy!
List of custom ROMs [updated 5th June 2012]
Before flashing any custom ROM, please make sure you have correct RADIOs installed as indicated for each ROM thread. Without correct radio, you will not be able to go beyond HTC Screen.
I'm stuck at RADIO 16 or RADIO 17 - what can I do to be able to flash whatever radio I like?!
You are most likely stuck on SPL2.5. Go to HTC website and download SPL 2.6 - follow the instructions on that page. Once you have downloaded it, remove SPL and get DFT HSPL on your Titan. Now you will be able to swap to either radio 16 or 17 - your choice!
These are Tango ROMs
1st custom ROM by DFT
Titan Custom ROM by nhathoa - reported to work with those who have 'locked bootloaders' and hence cannot flash any other custom ROMs at the moment.
ELIOBOOT edition by Azzelio
Dynamics7 by ultrashot
AT&T stock, but with full unlock by ryotgz
Unlocked Tango ROM with Turkish language AND background themes cooked in by pdaimatejam
Eburon ROM with Glass icons by herlek
These are Tango hybrids - (HTC-Nokia)
WPV 8779 Nokia Edition by no0b4v3r
DeepShining Nokia Edition - Tango by dotcompt
These are WP7.8 (new start screen) ROMs - mainly based on beta build as of 22/9/2012 and may be updated with new builds
EB Edition WP7.8 ROM by Azzelio
WP7.8 Titan Custom ROM by nhathoa
WP7.8 Titan build from WinPhoviet
Sianto Edition of 7.8 ROMs with all language packs, font fix and more
HTC Titan 7.8 8835 Europe stock base w/Full Unlock
AT&T Stock updated to 7.8 8835 Full Unlock
Internet Sharing on custom ROMs
If you flash any of these custom ROMs and don't have internet sharing option (AT&T users) then try this to enable it.
STOCK ROMS
If you ever want to go back to stock ROM - flash one of the suitable ones from this STOCK ROMS thread.
Issues that have solutions
1) Temporary fix that works for call quality issues
http://forum.xda-developers.com/showthread.php?t=1467643
2) Titan signal strength issues relating to the back cover.
http://forum.xda-developers.com/showthread.php?t=1477764
3) Titan keyboard keeps un-launching itself!
Known WP7.5 bug - http://forum.xda-developers.com/showthread.php?t=1386429
Fixed by OS update 8107.
4) My games/graphics are freezing at times, any solutions?
Yes, some threads suggest SRS enhancement can be the culprit. Switch that off.
* http://forum.xda-developers.com/showthread.php?t=1364840
* http://forum.xda-developers.com/showthread.php?t=1398196
* http://forum.xda-developers.com/showthread.php?t=1419576
* http://forum.xda-developers.com/showthread.php?t=1443038
5) Titan lags/freezes when storage is nearly full - least likely now. Only in few old handsets.
http://forum.xda-developers.com/showthread.php?t=1386926
6) Slide-to-answer not working/freezing when battery below 20%?
Try using 'battery saver' mode with low battery - http://forum.xda-developers.com/showthread.php?t=1486817
7) Zune Pass won't sync most of the time on 3g/wifi/both - I paid for it!
Try to log off from your Xbox or/and PC - log off from Zune, from everywhere but your phone. Then restart your phone. Most of the times it will be solved. If it doesn't work, drop me a line - I know someone in Zune support
Titan battery life
1) http://forum.xda-developers.com/showthread.php?t=1353601
2) Low battery and touch screen - http://forum.xda-developers.com/showthread.php?t=1363463
Hardware and looks
1) I'm sick of this black look of my phone, I want options like Lumia
Currently we don't have an option for cyan or fuscia or white Titan, but if you feel adventurous, go Chrome your HTC Titan - http://forum.xda-developers.com/showthread.php?t=1343284
If this adventure goes wrong, here is what you can do to fix the back of Titan - http://forum.xda-developers.com/showthread.php?t=1434201
2) LED colours experiment
http://forum.xda-developers.com/showthread.php?t=1421028&highlight=led
Hopefully more adventurous users will share more of their thrill rides with us and one day you will be able to have a rainbow if you like!
excellent idea this. well done
stevov said:
excellent idea this. well done
Click to expand...
Click to collapse
Was Original_ganjaman's idea (mod) from yesterday I think. Saw it this afternoon, thought it will help a lot in future if we do happen to grow as a larger community!
Nice job drupad2drupad, thats exactly what i was after. Hopefully this should reduce pointless threads, and keep this great forum clean! If anybody sees a threads that has been covered here, please report it or PM me. It will be closed.
Sticky!
Thanks
O_G
Updated, added solutions/fixes from recent threads.
AT & T wanted Titan rom Europe?
Goldcard can do?
Thank a lot!
First of all, the OS version does *not* matter here, it's all about the firmware version or bootloader version.
Second, "jailbreak" is a very ambiguous term on WP7, and one I really wish people wouldn't use, because there are multiple levels of unlocking.
The first, developer-unlock, is actually a feature of the OS and is supported by Microsoft. All phones can be dev-unlocked, but normally you have to pay for it (an AppHub account, intended for Marketplace developers, lets you unlock up to 3 phones and install up to 10 unsigned apps on each, for $99/year). Students can get a free account through DreamSpark, but only for one phone and up to three unsigned apps at once. There's another way, for $9 a ChevronWP7 Labs token lets you unlock one phone and put up to 10 unsigned apps on it. Unfortunately, those tokens are sold out and we have heard nothing on them getting any more (had to be approved by Microsoft). There are also some hacks that will dev-unlock a phone, such as WindowBreak (this thread). There aren't currently any such hacks available for HTC, though.
Next, there's interop-unlock. This means removing the 3- or 10-app limit, and also allowing the installation of apps that can use system components (drivers and long-running services) to break out of their sandboxes. These apps, commonly called "interop" apps after the ID_CAP_INTEROPSERVICES line in their manifests' that enables this capability, include things like registry editors and the HtcRoot project. All ways of getting interop-unlock are based on hacks. For Samsung phones, WindowBreak can be used to interop-unlock at the same time as dev-unlock. For HTC phones, though, you need to first be dev-unlocked before you can interop-unlock.
The third level is called "full unlock" and means the policy system that controls app sandboxing and user permissions has been disabled completely. Any app can run, and all apps run with full access to the whole device. Although this heightens the risk of malware or o accidentally damaging the device, it also allows all kinds of cool features to be added right into the phone, as well as enabling some very cool apps (including ports of WinMo apps). Currently, the only way to get full-unlock is to use a custom ROM.
In order to use a custom ROM, your device must have an unlocked bootloader. This is done by installing an alternate bootloader called RSPL, and can be made permanent by installing HSPL. You can read the DFT (Dark Forces Team, who are responsible, directly or indirectly, for almost all custom ROM achievements on WP7) threads on R/HSPL on this forum. Although all first-gen HTC phones are now supported for xSPL, be aware that it can only be installed over stock SPL (bootloader). Most fully up-to-date phones will be running SPL x.x.
For you, in particular, you can either try interop-unlocking, or you can try installing an unlocked bootloader and a custom ROM. The first option preserves your phone data, but is less permissive in what you can do. The second option allows almost anything, but you'll have to wipe the phone and will also be at the mercy of any bugs in the custom ROMs. Additionally, either option may require rolling back the phone in some way (firmware for interop-unlock, SPL for bootloader unlock), and interop-unlock will require first getting dev-unlock (may cost money).
Thanks GoodDayToDie
^^ Thats the first explanation I have heard about all the unlocking options available for WP7. God knows Ive looked, but it seems that every piece of easily understandable (for the WP noob) information is buried within some techno jargon that doesn't have a glossary of terms...
It seemed that If I had a different phone I could unlock, but i never really understood why.
Thanks.
Best explanation of wp7 unlocking! Thanks!
Thank you ...
been the subject of a beautiful
Very good explanation from a fellow HD2 owner. Don't just say thanks, press the thanks button. He deserves it
Thanks for the great explanation. Coming from iOS it's very helpful to find all important terms in one go.
Will try and keep up with the custom ROM releases and maintain a list in the sticky. Updated contents today.
Sent from my Titan using XDA Windows Phone 7 App
Camera
The features panarama and burst mode have also been deleted from the htc titan
Radio 16
drupad2drupad said:
Unlocking and custom ROMs
Understand Windows Phone unlocking first
1) Can I unlock Titan?
Chevron method - no more unless you have a token. - http://labs.chevronwp7.com/
Developer unlock - $99 - http://create.msdn.com/en-US/
Student developer unlock - free - https://www.dreamspark.com/default.aspx
[*]Flash a custom ROM - voids warrantly but give FULL unlock (for deteails keep reading).
All of the above will let you sideload apps with usual limitations in number of apps you can sideload (3 for student, 10 for other two).
However, certain apps that need Interop capabilities won't be able to sideload.
2) Can I Interop Unlock Titan?
Yes - full unlock with interop unlock by flashing custom ROM.
However if you don't want to flash a custom ROM, there isn't one for stock ROM yet. Follow these threads:
http://forum.xda-developers.com/showthread.php?t=1271963
http://forum.xda-developers.com/showthread.php?t=1407652
3) Are there any custom ROMs for Titan?
Yes at the moment there are 3 excellent ROMs (as of 5th June 2012). Please donate for the first HSPL + Full ROM on the bounty thread.
There is a bounty thread - http://forum.xda-developers.com/showthread.php?t=1445304
4) Can I force update my Titan?
Yes but please read the thread first - http://forum.xda-developers.com/showthread.php?t=1306415
5) Can I SIM unlock my Titan?
Yes possibly - http://forum.xda-developers.com/showthread.php?t=1379252
How to flash a custom ROM on my Titan?
At the moment things are a little tricky for AT&T customers, but not impossible.
All other Titans are easy to flash, but be careful. It is totally your own risk to take.
First we need to flash SPL on your phone. Then HSPL and then phone is ready to run custom ROMs. I will try and break it down for you in brief.
Use this excellent thread for DFT HSPL
Follow the instructions for Titan.
You can enter bootloader mode by first switching off your phone. Then press vol + and vol - keys together with power on button. Once the phone starts with white screen and letters in green, blue and red you know you are in bootloader.
Now connect the phone with cable to your PC. Wait for the PC to install drivers. It will tell you once it has successfully installed everything.
Then when it says 'Run SPL' you literally need to click on the "ROMUpdateUtility" - usually about 1.4 or 1.5 kB in size. MAKE SURE YOUR PHONE IS CHARGED AS INSTRUCTED AND STAYS CONNECTED TO LAPTOP AT ALL TIMES.
Once your SPL is flashed, you need to do the same with HSPL. Then same with custom ROM. In each of these folders you will find "ROMUpdateUtility" that you need to run one after the other. It's that easy!
List of custom ROMs [updated 5th June 2012]
1st custom ROM by DFT
Titan Custom ROM by nhathoa
ELIOBOOT edition by Azzelio
Dynamics7 by ultrashot
Click to expand...
Click to collapse
Great post!
I think it would be great to point out that the ROM from nhathoa is the only one that works in Titans with "locked" radio like me, for thoe of us that couldn't update it.
Hi.
I Installed the DFT Custom Rom.
After that , When i Connect the phone to my Car Bluetooth Receiver, my Contacts are not transfer to it.
but before the Custom-Rom it was worked.
(sorry for my poor English)