i've a new HTC 7 Mozart with windows phone 7.5, OS version: 7.10.7740.16,Radio Software version:5.71.09.02a_22.51.50.21U,Rádio Hardware Version:A.102.0.D4,Bootloader version:5.11.2250.1(133487) and firmware version: 2250.21.51101.401,buy on uk(Ornage)but its unlcok.How Can i Custom Rom
Help me please,i dont want brick my new phone
p.s. i´m portuguese,is there a nice rom whith PT language?
I am in the same situation, any help would be appreciated
anyone anyone?
I have a solution (tested on my Mozart)..
mudja said:
i've a new HTC 7 Mozart with windows phone 7.5, OS version: 7.10.7740.16,Radio Software version:5.71.09.02a_22.51.50.21U,Rádio Hardware Version:A.102.0.D4,Bootloader version:5.11.2250.1(133487) and firmware version: 2250.21.51101.401,buy on uk(Ornage)but its unlcok.How Can i Custom Rom
Help me please,i dont want brick my new phone
p.s. i´m portuguese,is there a nice rom whith PT language?
Click to expand...
Click to collapse
Hello all... as in title i was in your same problem.. my mozart was on SPL(bootloader) 5.10 but thank to greap ppl on here expecially Tklaeboe i follow this simply guide for Downgrade my Spl to 1.26..
Y-cable Refered to this link: http://forum.xda-developers.com/showthread.php?t=893152.
Found usefull info here; http://forum.xda-developers.com/show...195647&page=81. Thx goto Martin7Pro.
1. Download a STOCK ROM (see under the post what i used)for your phone from the proper region.
2. Format a 1Gb or 2GB SD card (i used 1gb Pendrive) and format as FAT32 under windows.
3. Use 7zip etc to extract the files from the stock ROM file.
4. rename RUU_signed.nbh to MOZAIMG.nbh
5. Copy MOZAIMG.nbh to the SD card.
5.1 In the SD card or Pendrive will be just a file MOZAIMG.nbh... nothing else!
6. Use the same "Y" cable arrangement you use for the Goldcard. Power side to your PC, SD card reader into one end, Phone to the other.
7. Power on the phone while holding Volume down and Camera buttons.
Phone should now go to a new screen showing "MOZAIMG.nbh ---" at the top, then showing
Load RADIO
Load Bootloader
LOAD OS
LOAD R.
I used RUU_Mozart_HTC_Europe_1.26.401.03_Radio_5.51.09.06_22.30.50.09U_by_ansar.. you can find here
only after that!!! you can install hspl/rspl, then flash any Custom rom.. i have Ariey rom now.. no problem and beauty rom
Hope that will be useful for you as was for me!! Feel free to ask if have doubt!! SEEYA
only after that?
I have SPL-5.11.2250.1(1333487) MNG.
restore point in Zune? -Ok, i tried that without luck
I have my hopes up that someday, someone could create HSPL that supports bootloader 5.10 or greater.
My bootloader version is: 5.10.2250.1(131801)
will this process work for pendrives with 4gb??
it's hard to find lesser capacity pendrives
---------- Post added at 04:57 AM ---------- Previous post was at 04:45 AM ----------
tried with a 4 gb pen drive
struck at usb host mode
maybe try this method: http://forum.xda-developers.com/showthread.php?t=1413694 without cable
I back my unbranded Mozart from 5.11 to 1.23 SPL and installed 7004
Me too downgrade SPL 5.11.xxxx.1 with ansar
Thank u again ansar
Now have HSPL 1.32 and Custom ROM
But u must check Firmware xxxx.xx.xxxxx.401
401 is HTC_Europe and only this phone can downgrade method ansar.
lucky people
well you are lucky as long as you got your problems solved. i must still wait for a solution for my phone. it is TMO-DE and i have the worst problem. i have a 16 gb memory phone. and nothing works for it.
OS version:7.10.7740.16
Firmware revision number:2250.21.51101.111
Hardware revision number:0004
Radio software version:5.71.09.02a.22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version:5.11.2250.1(133065)
Chip SOC version: 2.2.5.0
soo if you have a solution pls pm me. thank you!
cocovsalien said:
well you are lucky as long as you got your problems solved. i must still wait for a solution for my phone. it is TMO-DE and i have the worst problem. i have a 16 gb memory phone. and nothing works for it.
OS version:7.10.7740.16
Firmware revision number:2250.21.51101.111
Hardware revision number:0004
Radio software version:5.71.09.02a.22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version:5.11.2250.1(133065)
Chip SOC version: 2.2.5.0
soo if you have a solution pls pm me. thank you!
Click to expand...
Click to collapse
Hello Friend,
i have exactly same. Did you manage to downgrade it somehow?
Thank you
cocovsalien said:
well you are lucky as long as you got your problems solved. i must still wait for a solution for my phone. it is TMO-DE and i have the worst problem. i have a 16 gb memory phone. and nothing works for it.
OS version:7.10.7740.16
Firmware revision number:2250.21.51101.111
Hardware revision number:0004
Radio software version:5.71.09.02a.22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version:5.11.2250.1(133065)
Chip SOC version: 2.2.5.0
soo if you have a solution pls pm me. thank you!
Click to expand...
Click to collapse
I dont know that what problem you have.
But can find compatiable roms to downgrade your boot loader fro here
http://forum.xda-developers.com/showthread.php?t=2112687
and you can try y Cable gold card method.
Hello,
I am new in this word of the mobiles software.
I have an xperia GO.
I have read than the mobiles have a firmware that controls the Bluetooth, the wifi and the phone communication called radio.
Is this for all the mobiles ?
When I install a new ROM in my phone change the radio firmware ?
Thank you.
Dear all
I have just received an Android phone from china. The commercial model F1658
The phone model is KYX-909 and the build number is C909-KYX-F1658_EN_V03
The phone on the web is showing as an android 2.3 and also 4.0. I have received the 4.0 version however the GSM part does not work. No carrier can be recognized and the problem is not on the SIM card.
I have rooted the phone, installed windows drivers and also the ROM manager. Based on the information I have read, the problem might be on the baseband and might be related to the OS upgrade from the vendor.
Is there anything I can do to fix the baseband?
Do anyone have a proper OS image I can dump into the phone? WIll it fix the problem?
Thanks and Regards
Alejandro
i have this device
OUKU - Unbranded 6.2" 2 DIN Android Car Stereo Radio Head Unit
System specs:
Operation System: Android 2.3.4
CPU: FREESCALE I.MX535D Cortex A8 1GHz
Ram: DDR3 512M
iNand Momery: 4G
the supplyer sent me files for upgrade.
after upgrading the unit went dead.
i have the original files but the problem that the unit does not accept the volume+menu method which worked before.
i think upgrading changed the mcu and button combination does not work
i tried all buttons but no success.
my question : is there any way to re flash the unit with original firmware using pc running windows 8.
if ther is a solution please inform me with video, links if possible.
thanks for all
Need Firmware for Chinese Tab w/ Spreadtrum Chip&Board ID is S706 -MIPI V2.0 (SC5735)
I've managed to find out the firmware for this tab on below link.. It Flashed successfully on my tab (Ikon model ik-787). But I don't see anything on display after flashing the firmware on my tab.... The Number YK150731128 Doesn't match with the board with the firmware I downloaded.. Can anyone please get me a firmware for this tab or tell me how to get my display working with this firmware????
The firmware that I've mentioned earlier downloaded from : http://yun.baidu.com/share/link?sha...06(5735)V2.0%20%20%E5%8D%95%E5%8F%B7150625081
Hello ! Try to flash Digma Optima Prime 3G TT7000PG
It works for me ( Texet 7896, board S706-MIPI V2.0 (SC5735) ), but the camera does not work
IKON-IK787 firmware
ikon ik-787 firmware original is available absolutely free.contact me at [email protected]. FREE.