Hello all
I had installed the root and lagifx from his app and then I decided to wipe with all these things turned on and now it says I have it says install ext2 tools so I do it now it says I have a lagfix installed which I don't because I ran quadrant and I'm getting scores around 850 and If I try to un lagfix it says you don't have a lagfix but If I do put install lagfix it says you already have a lagfix!
Sent from my SGH-T959 using XDA App
Also I have wiped 3 times
Sent from my SGH-T959 using XDA App
Fix playlogos file and make sure your batt is above 40%
Sent from my SGH-T959 using XDA App
ypu
how do i do that please i want to apply the lagfix without it telling me i already have it installed? lol i found the playlogos file
Sent from my SGH-T959 using XDA App[/QUOTE]
Alanrocks15 said:
how do i do that please i want to apply the lagfix without it telling me i already have it installed? lol i found the playlogos file
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
There is an option in the App. It is called "Restore Boot Animation" I believe. Not positive though. Just click it and it will fix your problem and you can proceed to install the lag fix.
Dragoth12 said:
There is an option in the App. It is called "Restore Boot Animation" I believe. Not positive though. Just click it and it will fix your problem and you can proceed to install the lag fix.
Click to expand...
Click to collapse
That's what fixed it for me after I flashed Core + Bionix on my phone and tried to apply OCLF.
Get it worked thanks guys if I have root again plus the lagfix and I wipe will I have the same problem
Sent from my SGH-T959 using XDA App
Related
Every time I flash bionix-v all my phone does is hard reset. Now I'm sure its my fault. So I'm asking for help to find where that fault is. I'm following team whiskeys install instructions. But what I'm getting is sd card can't be opened or file doesn't exist. I've tried placing the file in numerous locations. But no luck. So at this point I'm begging for help! Please.
Sent from my SGH-T959 using XDA App
your putting it on the internal sd right??
Yes, in the dl folder on the internal card
Sent from my SGH-T959 using XDA App
no ...you dont put it in a folder.. u just place it on the root of internal sd
say if you use the stock files app ..when you open that you should be able to see your .zip there without going to any files
Oh dang! Thanks let me give that a try.
Sent from my SGH-T959 using XDA App
Be careful if this is your first Voodoo flash....it comes with it enabled. If you go back to a version without voodoo make sure you go into CWM (red recovery) and go to advanced and voodoo lagfix and disable it first.
Oh and let it convert and reboot completely on its own when installing..you will hear Linda talking..
Same damn thing...no joy.
No lagfix nothin just odin back to jfd...wanted a clean slate for bionix
Sent from my SGH-T959 using XDA App
Twisted galaxy s said:
Same damn thing...no joy.
No lagfix nothin just odin back to jfd...wanted a clean slate for bionix
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Well hell....maybe a bad download of bionix...
Ya know I didn't think that was possible BUT after the bionix-v -tw- voodoo.zip it says (bad) does that mean its a bad dl and I should start over?
Sent from my SGH-T959 using XDA App
Yea..just redownload bionix and try
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
no ...you dont put it in a folder.. u just place it on the root of internal sd
say if you use the stock files app ..when you open that you should be able to see your .zip there without going to any files
Click to expand...
Click to collapse
FYI it can be in a folder...I flashed everything like this from day 1. You should use md5 checksums to verify your download when they are provided though. It will verify bad downloads that could potentially hard brick your phone.
just flashed my friends bricked Vibrant back to stock with Odin. problem is when we try to install an app it says out of space and directs me to manage applications to make space. no matter how many apps i clear data on, it just wont let me install anything.
any suggestions?
maybe an easier way, but move everything to pc, format both internal/external, ODIN back to stock again, move only nec files back to phone.... what ODIN files did you use?
Dis you repartion in odin when you flashed back?
Sent from my GT-I9000 using XDA App
i used the 512 pit file and T959UVJFD. no i did not repartition.
Out of space comes up when you flash over a rom with voodoo lagfix not disabled
Sent from my GT-I9000 using XDA App
stefan.buddle said:
Out of space comes up when you flash over a rom with voodoo lagfix not disabled
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ok and the fix for that would be?
stefan.buddle said:
Out of space comes up when you flash over a rom with voodoo lagfix not disabled
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
xsteven77x said:
Ok and the fix for that would be?
Click to expand...
Click to collapse
????ditto????
disabled voodoo lag fix and still cant install anything.
Odin
Sent from my GT-I9000 using XDA App
anything else?
I have the Revolutionary recovery installed wanting to know of I install clockwork mod recovery will I do any damage to my phone.
Just want to be able to manage my back ups with the clockwork UI.
Thanks!!
Sent from my SPH-P100 using XDA Premium App
my revolutionary recovery =
Revolutionary CWM 4.0.1.4
lol so why would you?
runeazn said:
my revolutionary recovery =
Revolutionary CWM 4.0.1.4
lol so why would you?
Click to expand...
Click to collapse
Just want to be able to use the Rom manager app to manage my backups. I like to organize by the name of the Rom within Rom manager. I may be wrong but going into recovery mode only allows me to see dates and time of backup.
Sent from my SPH-P100 using XDA Premium App
Maddball said:
I have the Revolutionary recovery installed wanting to know of I install clockwork mod recovery will I do any damage to my phone.
Just want to be able to manage my back ups with the clockwork UI.
Thanks!!
Sent from my SPH-P100 using XDA Premium App
Click to expand...
Click to collapse
I'm guessing u mean twrp (TeamWin recovery project). I would stick with that, but it's more of a personal preference. Just try both and see what u like best. They are easily flashable with a pc38img.zip through the bootloader.
Clay333 said:
I'm guessing u mean twrp (TeamWin recovery project). I would stick with that, but it's more of a personal preference. Just try both and see what u like best. They are easily flashable with a pc38img.zip through the bootloader.
Click to expand...
Click to collapse
Yes, I did mean TeamWon recovery. I see there is a way to flash in Rom manager but am unsure if it will conflict with TeamWin recovery.
Thanks!
Sent from my SPH-P100 using XDA Premium App
Maddball said:
Yes, I did mean TeamWon recovery. I see there is a way to flash in Rom manager but am unsure if it will conflict with TeamWin recovery.
Thanks!
Sent from my SPH-P100 using XDA Premium App
Click to expand...
Click to collapse
If its the same as the evo, then it shouldn't. It just replaces the other recovery. If you don't mind doing this, you can get a file manager (like astro) and go into the folder where your backups are and rename the backups. However, I would only use letters, numbers and they default symbol that they use in the backups (usually a - or a .)
Sent from my rockin 3D
blu3poptart said:
If its the same as the evo, then it shouldn't. It just replaces the other recovery. If you don't mind doing this, you can get a file manager (like astro) and go into the folder where your backups are and rename the backups. However, I would only use letters, numbers and they default symbol that they use in the backups (usually a - or a .)
Sent from my rockin 3D
Click to expand...
Click to collapse
Ok great gonna try that. If I remember I did that before and got some sort of md5 error. I'll try again using a-or a.
Thanks for ur info.
Sent from my SPH-P100 using XDA Premium App
All you have to do is download rom manager and flash clockwork from that! I am running it for the same reason you are. The back ups are over a gig though...
Sent from my PG86100 using XDA App
moosh3 said:
All you have to do is download rom manager and flash clockwork from that! I am running it for the same reason you are. The back ups are over a gig though...
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Over a gig? Ouch!! Ok im going to try that. I have a 16 gb card installed.
Thanks for the info.
Sent from my SPH-P100 using XDA Premium App
Maddball said:
Over a gig? Ouch!! Ok im going to try that. I have a 16 gb card installed.
Thanks for the info.
Sent from my SPH-P100 using XDA Premium App
Click to expand...
Click to collapse
Yup. With TWRP, You could save space with the compress option.
Maddball said:
Over a gig? Ouch!! Ok im going to try that. I have a 16 gb card installed.
Thanks for the info.
Sent from my SPH-P100 using XDA Premium App
Click to expand...
Click to collapse
What I do is I keep the nandroid backups in a folder on my computer. If I want to flash a recovery (which I never do unless I'm at home anyway), I just mount the SD card and copy over. I only keep one on my card saving those precious GB for other goodies.
Thanks for all ur input. Soon as I get to my PC I will hit the thanks button.
Sent from my SPH-P100 using XDA Premium App
Rydah805 said:
Yup. With TWRP, You could save space with the compress option.
Click to expand...
Click to collapse
+1 a lot of space.
Locked & Loaded
"" Shooter on Deck ""
I installed pre beta 3 and then rom manager said I need to insert an sd card. I have one in so I partitioned it and that fixed it. Then I downloaded and installed gapps using cwn recovery. 4.0.1.4 I think. After that there was nothing new in my app drawer. Am I being stupid idk exactly how everything works yet. Would gapps give me market because that's all I really need.
Sent from my MB860 using Tapatalk
While I have not installed cm7 on my Atrix, I know that on my nook market doesn't show until you set up your Gmail account. Have you done that yet?
Wipe user data and factory reset then they will show
Sent from my MB860 using xda premium
i tried that and it didnt work
czausmouse said:
I installed pre beta 3 and then rom manager said I need to insert an sd card. I have one in so I partitioned it and that fixed it. Then I downloaded and installed gapps using cwn recovery. 4.0.1.4 I think. After that there was nothing new in my app drawer. Am I being stupid idk exactly how everything works yet. Would gapps give me market because that's all I really need.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Go to bootloader then recovery find install zip from SD card go into clockworkmod folder find the zip file for gapps which if I'm correct its called go inside me" or something similar and flash it that way. Sometimes when I'm installing roms for reviews that's how I have to do it
Sent from my Nexus S 4G using Tapatalk
already tried that
any other ideas
czausmouse said:
any other ideas
Click to expand...
Click to collapse
Can you get into recovery at all?
Sent from my Nexus S 4G using Tapatalk
yes i can. i just tried taking the app out of the cwm zip and using package installer but that didn't work either
czausmouse said:
yes i can. i just tried taking the app out of the cwm zip and using package installer but that didn't work either
Click to expand...
Click to collapse
Try what I said. Go into recovery then go to install zip from SD card then find clockwork mod folder it should be in there install the zip from there if all else fails find the market apk online. I suggest 4shared just type in apk. Android market
Sent from my Nexus S 4G using Tapatalk
fixed it you have to manually mount system in cwm.
czausmouse said:
fixed it you have to manually mount system in cwm.
Click to expand...
Click to collapse
That's what I was trying to explain to you
Sent from my Nexus S 4G using Tapatalk
Jorge330823 said:
That's what I was trying to explain to you
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
You never said you mount system. I've never had to do anything special to flash anything. I'M A NOOB!!!!
Sent from my MB860 using Tapatalk
I am trying to find a way to block permissions to certain apps after installation. I came across this app called PDroid but requires a patched ROM using a linux script. App can be found here http://forum.xda-developers.com/showthread.php?t=1357056.
Has anyone tried this app?
splttingatms said:
I am trying to find a way to block permissions to certain apps after installation. I came across this app called PDroid but requires a patched ROM using a linux script. App can be found here http://forum.xda-developers.com/showthread.php?t=1357056.
Has anyone tried this app?
Click to expand...
Click to collapse
I haven't. I use App Shield, and it works well
I forgot to mention there is also LBE privacy guard but I wanted to see all my options
You can try permissions denied.
Sent from my SAMSUNG-SGH-I777 using xda premium
If you have a ROM in mind, if be happy to compile for you. I've been using it on icscrewd personally the last few versions. It is a really easy install, just flash a zip in cwm and install pdroid from the market
Sent from my SGH-I777 using xda premium
avidmovies said:
If you have a ROM in mind, if be happy to compile for you. I've been using it on icscrewd personally the last few versions. It is a really easy install, just flash a zip in cwm and install pdroid from the market
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I am currently using UnNamed v1.3.2 from this thread: http://forum.xda-developers.com/showthread.php?t=1299474 second post.
Do you mind making a flashable patch? Thanks!
Sure expect one and a revert zip tomorrow.
Sent from my SGH-I777 using xda premium
There's a windows version of the patcher now if you're feeling adventurous
Downloading the ROM to my Linux box right now, in any case.
Sent from my SGH-I777 using xda premium
Mount /system in CWM before flashing.
Clear cache and dalvik for good luck
Install PDroid app from market to access features.
avidmovies said:
Mount /system in CWM before flashing.
Clear cache and dalvik for good luck
Install PDroid app from market to access features.
Click to expand...
Click to collapse
Thanks I will try it out this week.
UPDATE: Bad news bears. I flashed the patch as described (mounted system, wiped cache) but the system went into a boot loop. The boot animation kept cycling over and over again.
Did the restore zip work at least? That's the first I've heard of a bout loop caused by it.
It only edits 3 files, none of which could possibly cause more than a boot loop in any case.
EDIT: May have been a corrupted download, I'll be sure to post MD5, hashes next time. Sorry about that!
Sent from my SGH-I777 using xda premium
avidmovies said:
Did the restore zip work at least? That's the first I've heard of a bout loop caused by it.
It only edits 3 files, none of which could possibly cause more than a boot loop in any case.
EDIT: May have been a corrupted download, I'll be sure to post MD5, hashes next time. Sorry about that!
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I don't think it was a corrupt download. I just created a patch myself using the Windows program and it also produced a boot loop. I restored from a nandroid the first time, trying out the restore file right now.
Alright sounds good. That's still really is though, and I have no idea why it happens. Did you flash any addons on top of the stock ROM?
Sent from my SGH-I777 using xda premium
avidmovies said:
Alright sounds good. That's still really is though, and I have no idea why it happens. Did you flash any addons on top of the stock ROM?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Nope. Just the patch. Although the second time I didn't mount the system. Is this a necessary step? I didn't see anything in the OP of the PDroid thread.
Possible reasons for failure:
* Corrupt download first time
* Second time, didn't mount system
What is this "If you "integrated sys Dalvik into ROM" with Titanium Backup, you will have to undo it"? I am using TB but I'm not sure if this applies to my situation.
I noticed the ROM must be deodexed and I didn't see any odex filetypes in the system/framework directory. That should be the only place they appear right?
On a better note, the restore file works =) Thanks for the help
Yes, you should mount /system in CWM, as I didn't manually edit the patch to add in auto-mounting.
I just tried on Unnamed 2.2.1 and experienced the boot loop as well (created the patch using the Windows patcher). Restore zip works fine, and tried with and without mounting /system in CWM. There apparently is something in Unnamed that the code doesn't like
Too bad, sounds like a good program (I also use LBE and wanted to use it along side).
pinoymutt said:
I just tried on Unnamed 2.2.1 and experienced the boot loop as well (created the patch using the Windows patcher). Restore zip works fine, and tried with and without mounting /system in CWM. There apparently is something in Unnamed that the code doesn't like
Too bad, sounds like a good program (I also use LBE and wanted to use it along side).
Click to expand...
Click to collapse
It's a great app. I am running it on a Hellraised ROM. None of the AT&T base ones work. I sent the dev an error log from UnNamed 1.3.1 and he knows what the problem is and will try to address it in a future patcher release. (http://forum.xda-developers.com/showpost.php?p=22111242&postcount=757)
Check back on that thread whenever he updates it. It's worth it!
Alright, I'm currently running it on the latest ICScrewD flawlessly
Sent from my SGH-I777 using xda premium
stone_ship said:
It's a great app. I am running it on a Hellraised ROM. None of the AT&T base ones work. I sent the dev an error log from UnNamed 1.3.1 and he knows what the problem is and will try to address it in a future patcher release. (http://forum.xda-developers.com/showpost.php?p=22111242&postcount=757)
Check back on that thread whenever he updates it. It's worth it!
Click to expand...
Click to collapse
Thanks! I guess I didn't go far enough back in the dev's thread (DUH!) so hopefully he's got the info he needs to fix it. I'd really like to try it sometime.
The developer of PDroid has released an update to his patcher that fixes the bootloop issue for AT&T roms. I just installed using UnNamed v1.32 and it works great.
Feels good to block all of those permissions.