Can someone help me with this please:
I have just upgraded my M1000 to WM2003 SE using the guide on this forum. It all works perfectly apart from when I try and install an extended ROM - from the same sit...it tells me this:
'The program you have installed may not display properly because it was designed for a previous version of Windows mobile software'
The problem is the TP is inactive at this stage...so what can I do to continue the installation?
Thanks
Hi
That's preety sh...y situation.
One way to get around this is to edit your installation CABs with WinCE CAB manager and modify their winCE version information (so WM2003SE doesn't say they're old). Or: (simplier) just remove tpdisable.exe and tpenable.exe from extrom (or from config.txt if you have any in extrom). that will cause touch screen not to be disabled during extrom cabs installing.
Have fun.
If you're having problem in getting out from situation you're in, just put device in bootloader mode, place in cradle and reinstall Extrom with original shipped update. (you can delete nk_.nbf and radio_.nbf so that upgrade utility installs only extrom from ms_.nbf)
have fun.
Nice one thank you.
our friend mithuncmenon found a Wm6.1 Rom for gene he has upgraded and i have also upgraded it is real and kewl
Download
http://www.filefactory.com/file/31fda8/
file name is : gene_wm61_wwe.rar
Will Upload More Mirrors
here is the nfo which i found and i have translated it
GENE WM61 WWE.
(c) mUn, orefkov WWE 6.1 for marry.
Preparation XIP'a and OEM-softa - mUn.
Assembling with SYS from the the official WM6.1 Kaiser - orefkov. Entire soft from the system part of vindy and OYEM of soft is left as is. Size PagePool'a - 6 MB.. Installation.
1. BEKAP!!! Since y axis you changes, then to use complete bekapy of the system, type Sprite Backup, SPB Backup is impossible. You will preserve PIM information (contacts, bells TP) with the aid of program PPccPimBackup.exe.
2. CID Unlock. If with the load of device you see in the left upper angle in the second line "SPL y.y0..Olip", can pass this point, otherwise read, what to make: For the piercing of home-made piercings for the beginning it is necessary to place on device HARD SPL - this patchennyy SPL, which makes it possible to stitch through the piercings, nepodpisannye HTC, and without checking of their regional belonging. For this copy program gene_.hspl.exe to devays, and you will neglect it there. It perezagruzitsya after devays, and you must see with the load version SPL - y.y0..Olip
3. piercing. You aktivsinknite devays, and you will neglect program ROMUpdateUtility.exe. Place galochki, press Next. Do not survive, after seeing, that you renew to version 1.0.0.0. This is version nbh- file, but not the version of piercing. I is very grateful mUn'u both for portirovaniye of 'ki on I marry and for its invaluable help to me with portirovanii WM61.
Successes.
Aleksandr orefkov.
Click to expand...
Click to collapse
but according to me the response is very slow if u click on a application takes more time to repond even in navigation of ontacts everywhere and this rom is fully loaded and lite it has everything loaded
The response time is okay in my device. But the device takes more time to boot. And also the rom is a fully packed one...not lite version...nyways enjoy the new rom....
Thank u Mun_Rus & Orefkov
guys, we should thank mun_rus and orefkov for this upgrade... its their creation... Well, this upgrade was created with the oem & sys folders as is and only the .vm and xip was greloced... the gene wm6.1 kitchen which mun_rus is working on...
i did a lil remap of the packages inside this and deleted windows live (which doesnt work anyways), some useless tsk files, some images, transcriber, stock games and windows update (which also doesnt work).. added a few usefull packages and got a rom with good storage and with working packages
few steps explained in my thread
this is WM6.1 ROM released by orefkov on 4PDA nearly a month back
Thanks to mun_rus and orefkov for this upgrade. Ababrekar, if you have ur custom WM6.1 rom created, please publish the links.
Hey Should i download this rom then?
is it possible to remove useless things?
mithuncmenon said:
Thanks to mun_rus and orefkov for this upgrade. Ababrekar, if you have ur custom WM6.1 rom created, please publish the links.
Click to expand...
Click to collapse
i have a rom which is customised to my needs friend.. i dont know if anyone wants to go for it.. its kind of my first cooked rom, so there may be bugs too.. like for instance, gene hangs on the screen alignment mode.. u ve to reset 2-3 times and wait for the touch to enable (it works though) if everyone wants then i'll upload and share the link.. got a slow connection so will take lil time
ams1576 said:
Hey Should i download this rom then?
is it possible to remove useless things?
Click to expand...
Click to collapse
yes it is possible... information on the steps mentioned in my thread.. ask for experts guidance too alongwith it coz i'm no expert, only a learner and sharing my information
There is right translate of readme.txt.
GENE WM61 WWE.
(c) mUn, orefkov WWE 6.1 for Gene.
Preparation of XIP and OEM's soft - mUn.
Assembling with SYS from the the official WM6.1 Kaiser - orefkov.
Entire software from the system part of Windows and OEM's software is left as is. PagePool size is 6 MB.
Installation.
1. BACKUP!!! Since your OS is changed, then to use complete backups of the system, (i.e. Sprite Backup, SPB Backup) is impossible. Backup your PIM information (contacts, call logs and other) with program PPCPimBackup.exe.
2. CID Unlock. If on reboot of device you see in the left upper corner of screen in the second line "SPL 1.10.Olip", you can pass this point, otherwise read, what to make: For flashing of home-made ROM's for the beginning it is necessary to place on device HARD SPL - it is patched SPL, which makes it possible to flashing unsigned ROMs, and without checking of their regional belonging. For this copy program gene_hspl.exe to device, and run it. Device will reboot, and you must see version of SPL - 1.10.Olip
3. Flashing. Sync device with ActiveSync, and run program ROMUpdateUtility.exe.
orefkov said:
There is right translate of readme.txt.
GENE WM61 WWE.
(c) mUn, orefkov WWE 6.1 for Gene.
Preparation of XIP and OEM's soft - mUn.
Assembling with SYS from the the official WM6.1 Kaiser - orefkov.
Entire software from the system part of Windows and OEM's software is left as is. PagePool size is 6 MB.
Installation.
1. BACKUP!!! Since your OS is changed, then to use complete backups of the system, (i.e. Sprite Backup, SPB Backup) is impossible. Backup your PIM information (contacts, call logs and other) with program PPCPimBackup.exe.
2. CID Unlock. If on reboot of device you see in the left upper corner of screen in the second line "SPL 1.10.Olip", you can pass this point, otherwise read, what to make: For flashing of home-made ROM's for the beginning it is necessary to place on device HARD SPL - it is patched SPL, which makes it possible to flashing unsigned ROMs, and without checking of their regional belonging. For this copy program gene_hspl.exe to device, and run it. Device will reboot, and you must see version of SPL - 1.10.Olip
3. Flashing. Sync device with ActiveSync, and run program ROMUpdateUtility.exe.
Click to expand...
Click to collapse
Active Sync for emails does not run with ROM as well as this issue was with WM6. Certificates could not be installed on WM6.1 and windows default certificates are also not available in this ROM. Please resolve this issue.
I work on this problem.
don't you try to use the extrom for os.nb?
look its importan to have the windows default certificates ??? and what the need for it???
shahkh said:
Active Sync for emails does not run with ROM as well as this issue was with WM6. Certificates could not be installed on WM6.1 and windows default certificates are also not available in this ROM. Please resolve this issue.
Click to expand...
Click to collapse
Solved. Just create dir - Windows\System\CertDtls
2 ababrekar
Before make your rom, in initflashfiles.dat:
after line
Directory("\Windows")ermDir("System")
add line
Directory("\Windows\System")ermDir("CertDtls")
orefkov said:
Solved. Just create dir - Windows\System\CertDtls
2 ababrekar
Before make your rom, in initflashfiles.dat:
after line
Directory("\Windows")ermDir("System")
add line
Directory("\Windows\System")ermDir("CertDtls")
Click to expand...
Click to collapse
I successfully installed my company certificates but still Active Sync for my company emails is not working. It show error "The Security certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server" - Support code: "0x80072F06". Same certificates I installed on my WM6.1 are working on WM5 official ROM. Please guide further.
shahkh said:
I successfully installed my company certificates but still Active Sync for my company emails is not working. It show error "The Security certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server" - Support code: "0x80072F06". Same certificates I installed on my WM6.1 are working on WM5 official ROM. Please guide further.
Click to expand...
Click to collapse
Try the follow:
Download 4pda.ru/forum/attach/1462149/gene_cert_fix.zip.
Its small soft pack for fix certificate problem in custom ROMs for Gene:
WM6 WWE (mUn)
WM6 RUS (mUn & orefkov)
WM6 RUS Clear (mUn & orefkov)
WM61 WWE (mUn & orefkov)
WM61 WWE min rus (mUn & orefkov)
Usage:
Unpack archive to temporary folder.
Copy file ruu_signed.nbh from your ROM to this folder.
Run file make.cmd
After it work, if in this folder exist file ruu_signed.nbh, copy it back to folder with RomUpdateUtility.exe, and flashing your device.
Good luck.
hey bro can u release a lite version of 6.1 wud be really nice ...........
WM61 WWE min rus (mUn & orefkov) this means 6.1 lite is also available right can anone get me tat
I made a new rom base on 28011, some problems had been found:
1. the camera can't shot --- can't open the camera program, i searched the camera.exe in windows directory, nothing be found.
2. can't load the storage card. while i flash the other rom, it can work functionally.
3. can't on-off the wifi function in communication manager. use wifi function in start - connection menu can open the wifi, but can't close it.
4. Pressing the power key can't display the prompt of 'close windows' , and can't close the device.
5. picture can't be rotated by finger.
6. the time covers the x-button on title bar.
7. some fonts on some buttons are out of shape. I tried three Chinese fonts. (i use Chinese system)
8. Some Icons in start menu are bluring.
help me, pls. thks
who can help me?
Camera - Did you remove HTC Camera program?
WiFi - did you upgrade your ComManager?
if you use Mage Packages - read this thread, hope it will solve most of your problems.
Porting new HTC packages from Mega to Iolite ROM
for SD Card - do you use OEMDrivers from Iolite?
thks.
i extract oem, sys folders from a wwe iolite version (6.1), in the oem folder, no camera drivers seem to be found.
i found some oemapps (a folder) from other bbs, that exclude in my dump folder (after package), i put them in my oem\oemapps\, but the camera cant still function.
wifi: has been resolved.
sd-card: some consider it is effected by camera, really?
mega? i hear it first, i will try it. thk you again.
you should use drivers from iolite.
you can try to use my kitchen - download it here
1. about my driver:
I got the drivers from a wwe iolite 6.1 version rom, but the oem folder extracted from it seems to miss some drivers and oemapps (in oemapps folder, only a dsm file exist.)
2. about Mega rom:
the Mega is a model different from the iolite, the drivers can be used for iolite? I had read your thread "Porting new HTC packages from Mega to Iolite ROM", i will try it latter.
i have downloaded the Mega rom, but it seems not english version, i can't see. now i have to download a Asian version.
3. about kitchen
Your kitchen link is invalid, could you give me a complete iolite driver package?
I now cook my iolite rom through Bepe prb program, a Chinese developer made a windows-plugin, it's easy to use. if you intrest it, can click
http://www.oiopda.com.cn/thread-8120-1-1.html
delete the lang package, it will work with english.
the kitchen link works.
and there are mega roms in every language.
why did you downloaded wrong version?
please,forget about mega - you must have working iolite kitchen before, only then you can upgrade ext packages. you cannot use mega drivers.
your kitchen link can't still work properly, perhaps my reason? many links are invalid in the web on my computer.
i now had downloaded the english version, i will use it after my iolite rom works normally.
thks
you need to enable scripts to download from 4shared
I can't open the website, even enable the script. Perhaps it is forbidden to visit in China.
now the camera and stroage card can work.
the reason: some neccessary oem application didn't be integrated.
Hey Everybody,
I've got a problem with the FingerKeyboard 2.1 on my HD2.
I'm using ChuckyROM GTX, in which the FingerKB is originally installed, but I needed the hungarian language (which is not originally installed in the ROM's FingerKey.) so I decided to download the "language-full" version of the keyboard.
I've downloaded the 2.1 WVGA version with the GTX_White and other skins, but after I installed & adjusted it an error message appeared "Error loading skin" and "Skin error: resolution for screen size not found!" I've already checked the skin files out, I downloaded some new skins, but unfortunatelly the FingerKeyboard is still not working...
What should I do? Thanks in advance!
when i try to install cab from file explorer in htc hd2 it gives the message
"this program is from an unknown publisher.You should intall only if you trust its publisher.Do you want to continue?
when i press "yes" it gives me message that "installation of cab was unsuccessful"
i have enough space on my phone and memory card.
i have tried to download cab a no. of tomes
also this is happening with all cabs eg:fpsce,YAHOOMAIL
PLEASE HELP
I have the same problem! Need assistance!
Guys try installing this .cab to device. Then you should be able to install apps again
Nop, this cab also canot be installed.
Can't install or unninstall anymore..
I have the same problem!
Can't install or unninstall anymore..
Can you install from known publishers or is the probelm with only unkwon publishers?
* THIS * might help
it happens with all CAB's and the problem is not only with install, I also can't unninstall. Omarket, WM Market and XDA Market can't also unninstall..
It's a common application lock problem.
The solution that I always use is quite simple.
1. If you have Regedit installed and working use that one. If not download Mobile Registry Editor. Unpack the files, connect your phone through Activesync and open Mobile Registry Editor, you now should be in the registry of your phone.
2. Go to HKEY_LOCAL_MACHINE\Security\Policies\Policies
3. Change the value of 0000101a from 0 to 1
4. soft reboot
Works for me every time.
didn't worked
I had the same problem, tried everything but issue resolved after hard reset.
Cant install any cab
Im among many that seem to be unable to install any cab after flashing CleanEx ROM 6.5.x (sorry , I cant post there!) but no fix appears to be evident.
Has anyone resolved this?
click on a cab and nothing happens (Im well experienced at flashing, installation etc on an HTC Vogue NFSFAN ROM) but this on HTC [email protected] has me beat!