Hi guys I have an Evesham 7211 sat nav unit which uses win ce 4.2 but the unit freezes after the boot up screen is displayed.
I have a dump.bin of this device but cannot connect to the pc with it.
Does anyone know how I can flash this rom file back to the device to get it to boot again ?
help
bump common guys help me out please
Most likely there is nothing you can do, if device does not have a hard-reset option - you're out of luck.
hey guys
i have a hd2 ...
iwas installing the Original rom to my phone from memorie card then suddenly i dont know how ! it just jemped back to white greeen red screen then i reinstall the battery it give me soem errors abt the softwer updater failed
but when i try again it go till 1% an then phone restarts
guys i need help
i already tried task 29 .... but it didnt worked either ... i mean itc ant flash my phone stuck at 0% ...
help me guys plz
ty every one
.:Cryingman:. said:
hey guys
i have a hd2 ...
iwas installing the Original rom to my phone from memorie card then suddenly i dont know how ! it just jemped back to white greeen red screen then i reinstall the battery it give me soem errors abt the softwer updater failed
but when i try again it go till 1% an then phone restarts
guys i need help
i already tried task 29 .... but it didnt worked either ... i mean itc ant flash my phone stuck at 0% ...
help me guys plz
ty every one
Click to expand...
Click to collapse
to flash original stock rom, firstly you have to get the correct stock rom.
once you get the correct stock rom, you have to extract it using 7zip or winrar.
once you extracted the stock rom, you have to find the file name: ruu_signed.nbh
rename that file to: leoimg.nbh
note: nbh is an extension for image file containing the rom.
copy the file: leoimg.nbh to a micro sd card which previously formated to fat32.
the file must be put in root of micro sdcard.
now turn off your phone and insert the card.
press volume down button and press the power on button. hold it until the four color screen (bootloader) screen appear. now, you follow the instruction on the screen..
good luck....
HI to all any 1 plz help me about this solution. my huawei device suddenly got a problem of restarting i tried to install new firware via sd card procedure but failed im sucked up plzzzz tell me the solution of this..........!
i''ll be very thankfull of all of u...........!
regards
SYED TALAL AHMED
talalsultani5 said:
HI to all any 1 plz help me about this solution. my huawei device suddenly got a problem of restarting i tried to install new firware via sd card procedure but failed im sucked up plzzzz tell me the solution of this..........!
i''ll be very thankfull of all of u...........!
regards
SYED TALAL AHMED
Click to expand...
Click to collapse
Take the SD card out, start it again. It should boot into the previous version. So to Settings-> Uncheck Fast boot. Power it off, put the sd card back in and restart the tablet. This time the install should go through. (At least that's what has always worked for me. For others, they insist Fast Boot is just fine). After the update, remember to remove the init.cfg file out of the boot folder.
Greeting all.
As said, I have bricked my one day old phone.
http://www.aliexpress.com/snapshot/230332055.html
I accidentaly flashed it with wrong rom (it was late and didn't read).
Now when i try to flash it, i get this message:https://www.dropbox.com/sc/5cdxl6cdemcbvra/MkG1w84hHd
If anyone has the solution or know how to help me, I would appreciate it.
I wanted to flash it because my sim card didnt catch any signal (thinking that flashing could resolve the problem).
Flashed with this rom (not correct):http://www.needrom.com/mobile/star-x920e-6/
Should flash with this one:http://www.needrom.com/mobile/star-x920e/
Thank everyone in advance.
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
http://www.needrom.com/wp-content/up...ROOT_V0401.zip
2. Download now this ROM:
http://www.needrom.com/wp-content/uploads/2013/05/ML_20130423_STAR_X920_ROOT_LDv0404.zip
""" when you flash click on UBOOT and selected "LK_CD2.bin" and flashed """"""
you will flash only this image now!!!
Good luck!:good:
Repost Links.
jsain said:
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
needrom /wp-content/up...ROOT_V0401.zip
Hi, can you re post the 1st link, its not complete. Thank you.
Click to expand...
Click to collapse
Hello, I have a bricked x920 but e2001v21_v89_zlh_hd version, I tried everything but cant find solution.
I'm trying to flash using windows 8 but, I tried this rom but I still got "enable DRAM failed" as in the 1st post.
Any solutions?
Hi guys,
After flashing different Recovery ROMs I've finally bricked Star (Tengda) x920 8Gb device by flashing ROM from this link needrom.com/mobile/star-x920e-6/
Now when connecting it to Windows 7 x64 SP1 computer it is recognized as "MT65xx Preloader" device and after a few seconds disconnects itself. It connects/disconnects seems like forever.
I have installed driver for this device, but behavior stays the same. I've tried Mini Windows XP (x86) SP3, behavior stays the same.
What could be possibly done to recover device?
Please be patient, noobie here
UPD: This was resolved via video posted on needrom.com/mobile/star-x920e-6/ page.
star x920 flashing
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
does anyone have the oem room of the star x920Q?? i cant fine it anyware...
somebody had this rom??
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
did you find a solution ?
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
Same problem here with the exact model. Any solutions? Thanks
I need help with my mediapad S8-301L i can only get it to the logo screen on boot. and if i plug it in to my laptop i can get it in to fastboot mode. is there a way i can recover this device using fastboot????
i had rooted it and installed twrp like i had before. but due to formatting and starting a fresh to installing skygo i found my self rooting it again this time the same method bricked my device.... any help would be loved thanks in advance...
:good::good::good::good:
M1 s8 301l
hi m8, did u manage to fix this issue? im currently experiencing the same thing with mine, its just sitting at The EE splash screen, i can access fastboot, but it will not flash the system.img located from the update file,
would love to find out if there was a fix to this, i can even find the original EE rom that came supplied with the device...
Did you solve this , mines bricked due to overheating n desperately need a list from /dev/block/platform/msmxxxxx/by_name
That way I can extract the update.app correctly
Any help obliged
Rgds