My problem is following: I had BT headset connected with my device. Transferring of audio was redirected to BT headset. While BT and that transfer was still on, i flashed new ROM on my device. Since then there is no sound whatsoever on my device's speaker (no ringing, no alerts, nothing ...).
Sound is only available over handsfree or BT headset.
I've been searching and reading for the solution for the past few days, found some advices and tried them but none of them worked.
I flashed my device with old stock ROM and radio but still nothing, tried with several radio versions, ROM versions but still nothing. It seems like some flag is permanently up saying that handsfree/headset is connected and it cannot be reset.
Plz... somebody... anybody... help me solve this issue.
Thnx!
UPDATE: I disassembled my device, cleaned speaker contacts, and voilà, sound is back!!!
Related
Successfully upgraded my Qtek 8500 (UK) with both the Cingular and QTEK latests ROM
Works great.
Using for 2 days and now my microphone feeds everything back through earpiece and no one hears anything other end.
Same with walk and talk headset.
Works fine when working with bluetooth headset or car kit.
Is this a hardware fault and just coincidence, or have I messed up the registry or Radio etc.
Anyone seen similar.
Many thanks
Try a hard reset. Sounds like something may be corrupt in your audio managment files.
Just tried a hard reset, but no joy I'm afraid.
I have reloaded the ROM twice as well.
Is there a way to rebuild and reload these management files.
It has to be software as the walk and talk headset uses a different electronic channel and separate mic!
Well that's my theory
http://www.jetwaremobile.com/install.htm
Here's a link to Jetware Mobile's website. Since you are obviously using a Bluetooth headset and a handsfree car kit, it may be that the BT extension is getting twisted up. You can download and install a free trial I believe for 30 days. I did not need this for my BT connections with the QTEK 8500 but these things can be very hardware specific. By the way, did you try the phone after hard reset and prior to pairing with any of your BT devices?
Sorry to clarify, it is the handset mike that is not working.
When used with BT, voice is transmitted OK to recipient.
However using handset by itself all you hear is a slightly delayed repeat of your own voice in the handset earpiece and the call recipient hears nothing.
Thanks
Danny
I had a similar thing happen to a Sony Z600 and traced the problem to a resistor that failed. Apparently this controled where to route the audio when a wired headset was plugged in and when it failed everything routed through the headset port vs the speaker. Not sure if this is what's happening to your Qtek, I've got one as well and sometimes it just acts wierd, drops calls, wont hang up, wont recognize key presses but I just attribute it to the MS operating system. By the way, you can pick up Z600's fairly cheap, it's a great 2nd phone & syncs with outlook, I picked up another after my first crapped out with no problems.
Hi there,
I have a galaxy s2 that used to connect (with no problems) with my alpine CDE-126BT
After I messed around with the service mode for a while trying to crank up the volumes, there is no transmitted voice over the call (the other side can not here me when I'm connected to the car's Bluetooth).
I know that if I reboot the phone all the changes that was done in the service mode would reset to the default settings, it seems to revert back default but I still have the same problem.
I also tried other phones with my car's bluetooth and they work just fine.
Any advice??
Thanks,
David.
davidb89 said:
Hi there,
I have a galaxy s2 that used to connect (with no problems) with my alpine CDE-126BT
After I messed around with the service mode for a while trying to crank up the volumes, there is no transmitted voice over the call (the other side can not here me when I'm connected to the car's Bluetooth).
I know that if I reboot the phone all the changes that was done in the service mode would reset to the default settings, it seems to revert back default but I still have the same problem.
I also tried other phones with my car's bluetooth and they work just fine.
Any advice??
Thanks,
David.
Click to expand...
Click to collapse
Same problem here!! Did you find a solution?
Thanks
Hi, same problem here..... I'm still searching and waiting for a solution.
Did you try to connect to a Jabra earpiece? I did, and this actually works, but my car kit (Parrot MKi9200) stil doesn't.
SOLVED IT!
Problem solved .... see my thread:
http://forum.xda-developers.com/showthread.php?p=17260108#post17260108
Bluetooth was fine before I installed a new KH3 ROM. Now, the phone lags whenever I turn Bluetooth ON. Sometimes it actually freezes, so I have to restart it. The worst thing is that it does not dial numbers until I switch Bluetooth OFF. I have changed ROMs, tried different kernels and modems and also tried different headsets. However, the problem didn’t clear.
Has anybody faced a similar problem?
No responses, so it's either nobody has this problem or nobody turned his bluetooth to test!!
Will you be kind enough to turn your bluetooth (even if you have no bluetooth headset). Test how responsive your phone is with bluetooth ON. Can you dial any of your contacts?
Thanks.
Hey all,
Need some help with this, getting quite frustrated:
I have an international S III (i9300) and whatever rom I use I have the exact same problem that seems to be related to bluetooth.
- First use it connects to my caraudio (pioneer deh-4400bt) and it works great, good sound etc.
- Than I start Sygic (navigation) on the Phone, which I set in the "Always use internal speaker mode", so it doesnt use BT
Now two things happen:
- In sygic the sound through the internal speaker is very soft
- When I try calling with the carkit it does connect and make the call, but I hear a terrible garbled sound and i don't hear the other side
When I turn off bluetooth and than start Sygic... sound is perfectly loud
I have tried several roms, lastly thinking the issue might be solved with 4.2.2 but still the same
Is bluetooth hardware or software, and, when software, is it kernel or modem related?
Anybody know what causes this problem and how to solve it?
I am running Cuoco92 VR20 (fastboot version) on my X820 (i used this rom, after following instructions by andr68rus found in XDA, in order to solve the wifi "not turning on" problem i had). The problem (i still have, as i also had with other roms) is when i am trying to make phone calls using a bluetooth headset (tested with more than one different models) the phone call sound is not transferred to headset. I can transfer files, listen to music, but no phone call sound. Any idea
I was sure that my problem was not so common (this is why i did not manage to find any solution and opened the thread) but i really hoped that some of the tech experts around here could offer a solution