Can the X10 be overclock yet? I have rooted the phone and running 2.1. When I try the overclock all, it won't go past 1ghz
Thanx
Sent from my X10i using Tapatalk
Not yet. Apps like Overclock widget etc won't work, tried it myself numerous times but to no avail. We have to wait for the bootlocker to be cracked.
Sent from my X10i using XDA App
i dont believe that is correct in a way, technically, even though you can not pass 998mhz, you can set it so that it runs at 998 constant, rather than dropping down while in sleep mode. you can set as low as stock 246 and 998, or set low and high at 998 and check the difference. full exploration is needed to test where it runs best for you with options available. i am running the 2.2 zbuild.darkstyle with quadrant of over 1300 and mflops at 40.xx. havent tried to install JiT or JiTv2 on it yet but going to soon
True. I tried the overclock widget a few months ago without success. But set cpu, tho it doesn't increase cpu speed, does set a minimum frequency, which is pretty effective.
Sent from my X10i using XDA App
Related
Trying to gauge this.
Please say how high you can go, how stable it is, what ROM you are on, whether you have JIT installed and if you know it tell me the heap size.
no matter what rom i use, or if jit is enabled or not (it's not anymore, i hate the thing), my phone freezes at 806, I apparently got one of the lesser phones. 768 (or whatever) is what i normally set as my max.
768 is my max as well. I can run on 787 for a little while before it locks up but 768 is the highest stable speed. I don't use JIT
My max is 748, after that will freeze.
Sent from my Eris using XDA App
806 for me. No jit. I'd try higher but the next highest I have is 844 and its an instant freeze and reboot. Im on white widow 4.4.
Sent from my Eris using XDA App
suave smush v2
jit enabled
oc'd to 768
Can you overclock any higher when you disable JIT?
I run at 768/768 when the screen is on and 528 /245 when the screen is off with EE 3, and I would say it is really stable. Out of the 30 or so hours that my Eris is off the charger, Sense crashes maybe 4 or 5 times at max. Almost forgot no JIT.
806 on FroyoEris v20. Its the highest I've ever seen on my Eris. Usually with other roms I got to 710 without any issues.
Sent from my FroyoEris using XDA App
806 max / 604 min (screen on), 480/245 (screen off); no JIT; EE3. Quite stable at this, but any higher and it's an instant freeze. This goes for all other ROMs I've had with or without JIT. No clue what "heap" is, lol.
So you're saying you get 806 with or without JIT?
I can get my Eris to do 825MHz but currently use 806MHz just to be safe. My min is 160Mhz. Im using stock OTA 2.1 ROM with root. The only files I flashed were the kernel-overclock-update-v3.zip and eris21official-root.zip and I used the new root method.
wtf 825mhz? O_O That is insane! >_<
i immediately freeze on 825mhz, but run stable on 806mhz (with the exception of games, but i dont play any games). using froyoeris, v20, jit enabled. 5.6 mflops.
anyone designed a cooling system yet ?
if you did...dont answer plz
I run 768/480 (740/19 sleep,charge, or <30 battery) stable on ELB 2.7 @ 5.2 mflops. I can run 787 but sometimes freeze. I have seen 5.44 mflops at 806 but freeze after 10 minutes....instant freeze at 825. I think this rom has JIT.
Hungry Man said:
So you're saying you get 806 with or without JIT?
Click to expand...
Click to collapse
Yes
Sent from my Eris using XDA App
Stable @ 806. KaosFroyo v23.
You guys are lucky you can get to 806...
Lovin 806 @ 5.6 mflops
Sent from my FroyoEris v23
What is the best overclock app for a rooted Eris running Froyo 2.2?
What is the best min/max setting too for performance?
I use SetCPU. It really depends on what you want.
I want the best performance possible, without overheating my phone
No matter what you're going to heat up when overclocking. If you use setcpu don't use the widget.
What's the safest maximum performance setting then?
What about overclock widget app (free)? I'm using that now. It seems ok, not sure though compared to setcpu.
ChadZ said:
What's the safest maximum performance setting then?
What about overclock widget app (free)? I'm using that now. It seems ok, not sure though compared to setcpu.
Click to expand...
Click to collapse
that widget app sucks. it's nothing compared to setcpu. I run 768max 19 min, and I have a full day of battery life, using it fairly regularly every day. I rarely have lag, and it's fast too.
using kayosfroyo btw.
Every processor is different. Some people get get to 844mhz, some people can't push past 710mhz. You need to find what's right for you.
I personally get up to 787mhz.
I run 806 all day no problem. But faster is a reboot. All phones seem to be different on their safe max w/o crash. I use setcpu myself. It's free on this fourm for members.
Sent from my Cyno Tazz 3.0 using XDA App
Yes, SetCPU is best. I can clock mine to about 806 and I get about 48 hours of battery... every phone is not the same, remember that!
using setcpu here as well. 825mhz no issues
Im using set cpu as well at 768 max and 245 min. Make sure u dont have set on boot if ur going to test the limit of ur phone, I did and was able to go 806 and past rat my phone locks up and on every reboot the same so I had to uninstall in using command prmpt from pc
Sent from my FroyoEris using XDA App
SicNside, were did you find the info for OCing? I don't quite get the whole "minute" thing. Can you point me in the right direction, as in a guide with explanations and recommended settings? Every post I find about OCing the Eris is old, and says "hasn't been done"
Sent from my FroyoEris using XDA App
Yeah ill type out what my settings r to give u an idea, later when I get home to access a computer.. what I meant for min= minimum
Sent from my FroyoEris using XDA App
Read this page http://forum.xda-developers.com/showthread.php?t=761940 and it will give you a little understanding on setting up for performence and setting up for performence With Higher battery life. This is the place i liked the best only because i needed increse speed with out loosing to much battery power due to not being in a place to set phone on the charger like i work 9 hours a day and i like to listen to music and fiddle on my phone on breaks.. Plus honestly my phone does not seem to be performing any slower than it was with a high performence setup i used to be 480 min with a 787 max, and somtimes higher but 245 min with 748 or 19 min with 748 i still have not noticed anything being slower than when i had it set at 480 min 787 max..
But i cant stress enough that dont have it set on boot when u are trying to find ur phones limits because if u do have it set and find ur phones limits u will have to adb that crap to uninstall it. find the settings u want for your phone before you set on boot
Edit: And i have also been seing people post that after testing they have not found there Eris being any faster than 710 just that higher decreses there battery life. Which is Maybe why kaosfroyo has it alrdy clocked at 710 but i dont know, you cant quote me on that.. I hope i was of some help
does this app work on Streak?
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
crazy cat said:
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
Click to expand...
Click to collapse
998Mhz is the limit for the kernel. you need a kernel that can be overclocked for that option....
it works fine. at this moment in time you can not overclock but it auto detects settings just fine and you can set screen off speed/battery low speed to extend your battery life.
crazy cat said:
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
Click to expand...
Click to collapse
Wait, u know there are three levels of clocking, right? one is under clock, one is clocked and one is over clock. There are two frequencies when u turn on the setcpu, one is max and one is min...but i would like to know if u r able to make the max and min both up to 998mhz so that it can run at full speed at all times
zgmf-x322a said:
Wait, u know there are three levels of clocking, right? one is under clock, one is clocked and one is over clock. There are two frequencies when u turn on the setcpu, one is max and one is min...but i would like to know if u r able to make the max and min both up to 998mhz so that it can run at full speed at all times
Click to expand...
Click to collapse
yes you can bro. both max & min are customizable from 24500Mhz upto 99800Mhz. however, ive found that having the streak running totally max when the screen on will simply drain your battery, there are no real speed improvements to be seen. a good compromise to combat lag would to be to set screen on: 76800 - 99800Mhz.
i completely downscale mine when the screen is off and although the battery life on the streak is good, doing this makes it even better. no lag when switching screen on either (frequency change)
Works great for me too! I don't see any need for overclocking a phone (unless you don't use it as a phone..)
I unplugged mine from the charger about 1.5 hours ago, still 100% battery..
thanks guys for the reply, appreciated it alot!
it does and very well
to get interactive setting you must at least have performance fix and it will let you overclock and add interacting setting i just did perf. fix and setcpu settings and now quadrant score of 1700+
Works great for me. Flash smokku and fard's djsteve kernal perfmod using clockwork or streak mod and then you can overclock using setcpu. Look at my signature line below.
Dell Streak, 2.2 froyo (318), custom kernel, OC to 1.2ghz, quadrant 2002, hspda signal mod,
I've updated my UK streak to 2.2.2 today and rooted it but in the process lost the standard 2.2 upgrade so was wondering if someone could post how the CPU settings were changed so I can do it manually? I checked quadrant and I'm currently running at about 750 and before the update it managed around 1250 but I'm unsure about about what settings to change and what will run safely without melting my phone! Help?!
Sent from my Dell Streak using XDA App
Using SETCPU for root i found that if i set it over 1190 it would total lock up during stress testing, so try it but you'll have to pull the battery, I keep mine on ondemand setting, min 350 max 1190. smooth as anything
Hey guys I know this was already asked but still i didn't found an answer . Is there anyway to incrase your CPU limit . Mine it's at 729 . If i set it to 747+ it will block and reboot . So is there a way to incrase it ?
I'm using Kernel roq XIII+ .
The cpu in this phone is what I believe to be an Arm v6 Adreno GPU. The max overclock we can get on the phone (whilst stable 100% of the time) is around 748mHz. I've seen people with 806mHz at certain times using Rom and kernal mixups, like once when I used PerfectPeso and Francos Kernal. Weird occasions...
I'd say max for speed and so on, go 100mHz or around that for lowest, and 728mHz for highest clocks.
Sent via Tapatalk for Android (T-Mobile HTC MyTouch 3G Slide running HTC Update #5)
CJJames said:
The cpu in this phone is what I believe to be an Arm v6 Adreno GPU. The max overclock we can get on the phone (whilst stable 100% of the time) is around 748mHz. I've seen people with 806mHz at certain times using Rom and kernal mixups, like once when I used PerfectPeso and Francos Kernal. Weird occasions...
I'd say max for speed and so on, go 100mHz or around that for lowest, and 728mHz for highest clocks.
Sent via Tapatalk for Android (T-Mobile HTC MyTouch 3G Slide running HTC Update #5)
Click to expand...
Click to collapse
Dont underclock below 448MHz. All frequencies below that have the same voltage so its pointless as power consumption will be same. If you clock too low, it'll take more time to come out of sleep. And don't overclock above 748Mhz. If you consistently clock above 748, there is a high chance for kernel panics. I know a guy who did so and now even 748 isn't very stable for him.
That is not totally correct. 122 MHz uses a lower voltage than 245-480.
Sent from my LG-P500 using XDA
NeuDLi said:
That is not totally correct. 122 MHz uses a lower voltage than 245-480.
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
However it's slow and there is a reason why LG chose not to you it by default
Sent from my LG-P500 using XDA
So no one know if it's posible to incrase that limit ..?
Cresqo said:
However it's slow and there is a reason why LG chose not to you it by default
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
You mean in the same manner LG chose to use crappy default kernels with defective touchscreen driver, or a crappy GB firmware, yes? Sorry but what LG does or not does is simply irrelevant.
And I did not tell anyone to use 122 MHz, but it is possible and at least with screen off can't hurt. If you don't like it don't use it! But don't act like you knew better.
Sent from my LG-P500 using XDA
I use 480-748 with no problems on my current rom (Lupo's CM9 test), if your phone is unstable or simply reboots then you may wanna try another rom/kernel
With popdog's Oxygen rom (version 2.5 at least) I also had no problems with the same range.
See what CPU we have it's one 600 very stable. if you are clocking it more it will heat up that's why it reboots and some time it freezes. I would suggest you you to use it at 600 or you can go little upper side. But if you really want to over clock it high then it has some issues. There are extreme heat. battery drain. reboots. hang. it can break you sound and VGA chip...so do it wisely. in 600 LG P500 is very good.
Every combination will be different. Some CPU will handle higher clock speeds than others. The manufacturer only lets it pass inspection if it exceeds their minimum specs. That means there will be some that can handle more.
You will find out with use.
Your kernel and governor will also make a difference. So will the rom depending on the tweaks used.
Do you really need to clock it faster than that? The faster you go, the hotter you go, which shortens the life of the chip. Heat is the enemy.
Sent from my LG-P500 using XDA