Cant connect bluetooth after 2.1 update - XPERIA X10 Q&A, Help & Troubleshooting

Not sure if anyone can help me with this, but my x10 no longer connects to my pioneer avic u310bt car deck. I can get the deck to find my phone and prompt for code entry but afterwards it fails connection.
Phone and deck worked perfectly together in 1.6 and I've been on both nordic and now rogers firm ware. I can connect to my bt head set, just not my car deck anymore. Advice would be greatly appreciated. Thanks!

Seems the 2.1 update has stripped the X10 of much of its bluetooth functionality. I've read elsewhere in the forum of this problem and so far none of the people experiencing it (including me) have found a solution.
When I attempt to transfer files from my PC to the X10 (which worked fine under 1.6) I now get the message "No services found" which seems to imply that the phone's bluetooth specs are now missing something.
Maybe we need to wait for a patch from SE.
If anyone has better ideas please enlighten us.

Related

[New Project] Help needed on getting TMC running on X10 Navigation

Hi Ppl.,
I'm starting a new project with this thread.
Goal is to get TMC running within Navigation Software on X10.
As we all know from the specs and my determining over here, that there is no FM Chip assembled to the X10.
But our User drobec208 had the Idea to make use of an external bluetooth / TMC device.
The Idea is to use the "FM9BT-C", made by GNS GmbH with "usually TMCable" navigation software. (Nice side affect: FM9BT-C also brings a 5V, 1A USB Charger ).
I ordered one FM9BT-C and received it yesterday.
As I make use of Sygic mobile maps for Android, I knew from the .ini files, that TMC is just deactivated after stock installation of Sygic.
Within the folder: "\sdcard\Drive\Android\" you can find the .ini files too.
But now, I'm a little stuck.
I can't even connect FM9BT-C to X10.
Pairing works fine, but the my phone shows: "Paired but not connected".
I also can't connect both devices.
I guess, it's the same issue, like I had with my Bluetooth keyboard:
Android 1.6 is simply not capable for HID Devices.
So I guess its same with the TMC Device.
The TMC Device needs to be set up with a COM Port.
But atm I don't even get so far.
So guys, whats your advice?
Any Devs around, that can help out?
Do I have to wait for 2.1 this month?
Is Android not TMC capable at all?
Kind regards,
McK
O.k., as far as I could determine myself, a Bluetooth COM Port is needed for sure.
But how can I set it up in Android?
Is is that impossible with 1.6?
if it's connected via BT I'm affraid the problem is limited Bluetooth profiles support on 1.6. The USB on FM9BT-C is just for charging?
O.k., I feared something like that.
As the Update to 2.1 will come in a few Weeks, we will see more, after it was released.
Du you know something about the profiles in 2.1?
Japp, the USB connector is for charging only.
not much, just google I'm waiting for 2.x just because of BT profiles and my SE MBW-150 support via OpenWatch http://beta.smartmadsoft.com/
http://developer.android.com/sdk/android-2.0-highlights.html#PlatformTechnologies
http://www.google.com/support/forum...n&fid=40c6f9447eac44e600047f171034e819&hltp=2
otherwise I'm affraid we have to wait for 2.2
http://developer.android.com/sdk/android-2.2-highlights.html#PlatformTechnologies
I've also recently found this Thread in a German Forum:
http://www.android-hilfe.de/439320-post42.html
Roughly, fast and only the important thing translated: Wit Android 2.1 for X10, the Bluetooth Stack will be updated to Bluetooth V 2.1, which introduces:
- secure simple pairing
- GAP Generic Access Profile
- GOEP Generic Object Exchange Profile
- OPP Object Push Profile
- PBAP Phonebook Access Profile
- SPP Serial Port Profile
So, we have to wait a little more....
@MBW-150: OMG? S///E X10 isn't supporting a S///E Bluetooth Watch... *[email protected]///E*
Uhm, bad news.
I still get "paired but not connected".
Even after updating to 2.1.
I guess the connection has to be initiated by software (like on the bluetooth keyboards).
Does anybody know the name or so of the bluetooth com port?
I'd try to connect through Sygic Mobile Maps.
hi, I'm not glad to hear that.
what happens if you try to find TMC device from within the Sygic?
P.S: My MBW-150 finaly works with X10
drobec208 said:
what happens if you try to find TMC device from within the Sygic?
Click to expand...
Click to collapse
Unfortunately: Nothing...
My last hope is to set the bluetooth comport manually within Sygic.
With a little chance, it will activate the connection if it knows the way...
But I don't know the port
Is there an app, to list the ports or so?
maybe http://code.google.com/p/android-serialport-api/ ?
Uhm... I have no idea how to use that App

[Q] BlueTooth Tethering

Dear Members, I have searched and read several threads on this, but don't seem to find the exact answer I am looking for. I have an unlocked HTC Aria (AT&T Branded) currently running on Android 2.1. I am not particularly interested in changing the ROM as the phone does what I need (Calls, Messages, E-Mails, and Web Browsing). However I would like to also be able to do BlueTooth Tethering over to an Archos 70 IT tablet that I use for all the rest. I notice that the apps that would do this, all require ROOT. My question is, if I can ROOT my phone ONLY in order t be able to install any of these BT Tethering Apps? Do I still have to install a ROM, or will ROOTING not affect anything else?
I appreciate you comments and any suggestions that you might have.
Thank you very much.
No you can root and leave the stock rom in place.
Sent from my Liberty using XDA App
Thanks mtnlion!
Ok! So I rooted my device and installed WIFI Tethering. The program does start on my Aria and the wi-fi signal is picked up by my notebook, however it shows limited connectivity (basically no internet). Unless someone has any feedback, I would now assume that it is an issue of my phone not connecting to the network, however I have tried the web browser on my phone and it does work, I also tried BT Tethering but both devices will show "paired but not connected", and can't get passed this step, so any comments again will be much appreciated.
Thanks again,
Stormglider said:
Ok! So I rooted my device and installed WIFI Tethering. The program does start on my Aria and the wi-fi signal is picked up by my notebook, however it shows limited connectivity (basically no internet). Unless someone has any feedback, I would now assume that it is an issue of my phone not connecting to the network, however I have tried the web browser on my phone and it does work, I also tried BT Tethering but both devices will show "paired but not connected", and can't get passed this step, so any comments again will be much appreciated.
Thanks again,
Click to expand...
Click to collapse
Don't know if this thread might help or not.
.
Thanks cHarley04,
I finally flashed Liberated 2.2.2. and it does exactly wht I was looking for!
Cheers,

PDAnet tethering problem

I have a gtablet flashed with honeycomb. I downloaded the app PDA Net on my phone and tablet. Via bluetooth, the two devices find each other fine. Bluetooth light is on via phone. Proxy is set correctly on tablet, When I go online to any site I get a PDAnet message:Fail to connect Bluetooth server (java.io.IOExcetpion: Device or resource busy)
Did I miss a step or is somthing wrong? Can someone walk me through this? I am new to the tablets, but very anxious to get the most out of it.
THanks
One more thing, in case I wasnt clear. Both devises are paired but not connected, even though the phone shows a bluetooth connection.

[Q] Issue with pairing X2 running CM7 with Win7 by bluetooth

Instead of driving myself crazy trying to get this to work then finding out its not possible im going to see if anyone has any input on this.
I use my bluetooth headset with my X2 just fine but I want to pair the phone with my computer to use the app BlueNMEA to send gps data over bluetooth to use in Streets and Trips on my computer.
The problem is that after my computer tries to pair with my phone it tries to install drivers and then fails. I have the USB drivers installed but obviously its looking for different drivers. I just have no idea what drivers it needs or where to find them.
So any help would be much appreciated, even if its just letting me know that someone has successfully paired their phone with their computer... then Ill at least know im not working toward a dead end. Thanks!
I'll look more into it, but does BlueNMEA provide Bluetooth drivers on there support page?
Also, Do you provide the pins and such for pairing the device to the computer? Have you had a successful BT connection with the computer in the past?
Also, next time post in Q&A's please.
This is the first time I have tried pairing the X2 to the PC with bluetooth so no I have never had a successful connection before. This is something I used to do with my old windows mobile phone and recently have the need for it again.
Yes it does ask for the pin and once entered both devices attempt to connect but when windows then tries to load the drivers which would allow the devices to communicate it just fails.
BlueNMEA as far as i know doesn't need any special driver once the two devices are communicating.
Sounds like something is needed from the site, what ROM are you using?
Tapin' the Talk on the xSquared

[Q] Bluetooth not autconnecting to devices that are already paired (functional)

I have my evo on jelly bean (ota + root, S-ON, booloader unlocked, TWRP). Previously when it came into range of my car's Bt, my HS3000 samsung receiver, or my Bt receiver on my HTIB, simply turning on bluetooth would connect to whichever devices were around. after jelly bean (or some inadvertent setting change on my part) i now have to go to BT settings, select the device i want it paired to and click it. After this, connection is established and media/phone etc all work fine.
Its a little annoying to have to do connect to the devices manually even though they are already paired...
I have tasker, maybe someone with a little experience automating this kinda process can tell me how to make it look for the three devices when i turn on bluetooth and connect to whichever one is available. I know the phone is capable (it did this on its own before Jb), im not sure if theres something im missing/or if i jacked something up without knowing.
any advice is appreciated, I did search for people who were having similar problems to no avail. If i missed this particular answer, please dont flame me (im an evo lte newb)

Categories

Resources