I started developing a small application that rotates the screen of the tom tom 6 / 7 in landscape, when it is launched. It remains only to solve the problem of the arrival of calls, because the screen back to portrait mode. I thought I would tell whether there is a speakerphone connected (headset, bluetooth, carkit) or not. In fact I think it is unnecessary for the navigation functions while we are in conversation with your phone to your ear, and if we are hands-free car example, it is useful to keep talking on the phone while using the GPS, even if you can not hear voice instructions.
I'm waiting your comments and suggestions. Will publish next week the first beta in this thread.
Hi, your idea is great.
Not really understand the question about the incomming call. It is supposed that if you use your phone as gps navigator while driving, you have it mounted in a proper support, and you will answer the call using the speaker or hands free. It should remaing in landscape.
I think the question is: if you pick up a call, how can you make your device go back to the tomtom screen automatic after call pickup.
So call and navigate at the same time.
I've got the same problem.
When someone calls whilst navigating, the screen does not go back to tomtom as long as you're on the phone.
It did that on my diamond but not on my hd2 for some reason.
Related
I successfully paired Cingular8525 with Acura 2007 HandsFreeLink. But after it report successfull pairing, I can not use it. It saying phone not found. I use same phone before with PArot system without any problem.
If you go to Acura web site they report 8125 will not support call waiting and data link, but will support basic phone functions. But it does not work for me. Does anyone succesfully paired 8525 with Acura HandsFreeLink? Is 8525 better then 8125 in list of futures supported by acura?
Thanks
I successfully use the 8525 with my Acura TL's Bluetooth. (Previously used an 8125). It works, but occasionally it will drop the Bluetooth connection. This seems to be a known issue with Bluetooth on the 8525.
BTW To get battery level and signal strength meter on the Acura, you need to get the following program:
http://www.jetwaremobile.com
Mike
I have the same problem with my 2005 BMW 545i. Only stays connected when I leave the screen on. If I hybernate it, I lose bluetooth connection. The Jetware program did not seem to help.
sign up for the jetware beta -- might help
my TL also randomly drops the connection as well.
Question, when you answer an incoming call, does the HFL beep twice? Mine does, and the people on the other line can hear the second beep....
Oh well, just live with it I guess....
Bluetooth Acura paudible Tone problem
Yes, I also get dropped more than occasionally in the Acura bluetooth connection. Any fixes? Another Acura problem for me is that when audible tones are created to SEND tone data replies ( " hit 7 to disconnect"), the last tone in teh sudible series sticks and hangs on for 10 seconds or so. The tone message is sent and recieved, so the call actions continue in the background to the tone. Cingular says hardware and send back phone. Any alternative ideas ,or does everyone else have tone work ok?
Bluetooth Acura audible Tone problem
Yes, I also get dropped more than occasionally in the Acura bluetooth connection. Any fixes? Another Acura problem for me is that when audible tones are created to SEND tone data replies ( " hit 7 to disconnect"), the last tone in the audible series sticks and hangs on for 10 seconds or so. The tone message is sent and recieved, so the call actions continue in the background to the tone. Cingular says hardware and send back phone. Any alternative ideas ,or does everyone else have tone work ok?
this actually worked for me, however, the drain on the battery is siginificant, so if you can live with that, I have gone two weeks now without a dropped call....
http://forum.xda-developers.com/showthread.php?t=247520
I use an, admitedly ancient, Icon BT Headset for calls while driving, and all works well with one annoying problem.
With all other phones that I have used this with, the Headset synchronises completely with the phone. By this I mean that once connected, the phone's speaker is disabled and all keypad sounds, tones and other noises come through the Headset. To answer a call I could press "answer" on the phone OR press the button on the Headset, and the same to hang-up. Lovely Jubbly.
However, with the Blackstone, I have to Slide to Answer the Phone and then press the button on the Headset to activate that. Pressing the Button on the Headset alone does not answer the phone but instead tries to activate the Voice Dialling function, whether or not there is an incoming call.
The only noises that come through the headset, except while "in a call" are the ring tones.
Now, I ask, is this a problem with the Headset or, is that just the way things are with the Blackstone and BT Headsets?
If it's just that mine is old and knackered then I will get a new one, but i do not want to shell out for something that is not going to fix the problem.
OK. How about I rephrase the question.
Most of you out there use BT Headsets of some description. Which ones work like a common or garden phone?
Any? None?
Just want some advice before shelling out on trying to fix a problem that may or not be fixable.
Before you go spending money, try this software. It is fully featured and free for 15 days. It is an alternate bluetooth stack for Windows Mobile. See if it fixes your situation.
thanks for the advice.
been away, so only just got the message.
have installed. will report back with how it goes.
Hi there - long time lurker, first time poster!
Now, I'm not sure if this is a phone setting issue, an Android issue or my satnav/hands free issue - and sorry if this is a common problem, I did a search on the forums and haven't managed to find anything yet, probably using the wrong key words
So then, I've paired the S3 with my Navigon 70/71 (rebranded as maps & more by Volkswagen) and it works beautifully for streaming music. It connects as soon as I enter the car and holds the signal well!
...however, when I go to make a call from the satnav - it dials the number fine, but plays the audio through the phone earpiece and not the satnav speakers.
Of course, to remedy this I can manually click the headset icon on the phones call screen - but this is far from ideal as it means every time I nip in the car I have to get the phone out, set it to send audio through the bluetooth device and then start my journey. The moment you forget renders the hands free useless and you click answer or dial on the satnav and it plays the audio through the phones earpiece
My old phone used to just allow me to get in the car without a thought, get a surprise phone call, click answer on the satnav and all the conversation would play out through the car speakers without a second thought... can I do this on ICS and the S3? Basically getting it to auto route audio through to the car stereo when connected?
Thanks for your help and sorry if this is the wrong section/covered a million times before..
This is such a simple problem..
I tried explaining this to HTC tech support but they only have AT&T phones to look at and hold when customers call in.
The AT&T HTC One (M7) phone uses a custom setup for its car dock mode.
I am asking anyone who does NOT have the AT&T version to do a simple car dock mode test.
Here is the problem:
In Car Dock mode (whether you launch it via the app drawer or you plug it in to the official dock which launches it for you) in the bottom right corner is the SPEAK icon.
Launching SPEAK will enable you to call someone or search for music by voice (simple) it also has confirmation though unlike Google Voice Dialer or Google Voice Search.
(there is no icon in the App Drawer) it is only accessible in CAR Mode.
The problem is when you launch it, by design it searches through your contacts and music for just a few seconds to check if you have new contacts or music since the last time you launched it and becomes aware of them. So when opening SPEAK it says on the screen:
"PLEASE WAIT A FEW SECONDS WHILE UPDATING CONTACTS AND MUSIC".. (not the exact wording but close enough)
(it also says audibly via the speakers "PLEASE WAIT" (again, not the exact wording but close enough)
Then when its done searching (about 1 - 3 seconds) it makes a tone and starts listening for your commands.
This works perfect and its a great feature when driving.
NOW HERE IS THE PROBLEM I NEED TESTED:
When a bluetooth device is connected it will hang on the screen where it says:
"PLEASE WAIT A FEW SECONDS WHILE UPDATING CONTACTS AND MUSIC".. (not the exact wording but close enough)
At this point you should hear "PLEASE WAIT" (again, not the exact wording but close enough) but that NEVER happens, it just hangs there until you disconnect the bluetooth device and then reconnect it. Upon the bluetooth device reconnecting it finishes searching and works without any problems.
NOW PLEASE READ THIS CAREFULLY..
It works with a bluetooth car stereo, headset, etc just fine if you launch the SPEAK app from the Car Dock icon. All is spoken through the bluetooth device and all is perfect like you would expect.
Its ONLY when launching it via your bluetooth button that it hangs.
So the audio stream is working either way, but its the initialization from the bluetooth device that causes the hang..
THIS IS SO SIMPLE TO TEST FOR ANYONE WITH A BLUETOOTH CAR STEREO, HEADSET, ETC. EXCEPT FOR HTC BECAUSE THEY ONLY HAVE THE STUPID AT&T VERSION AT HTC TECH SUPPORT (argh!)
I managed to get it to work back to back successfully only once but I can not get it to do it again.
IF I can get a few people to verify this flaw we can get a fix started via HTC.
I tried to report the problem to them but they can not see what I am talking about so directing them to this forum after others verify it might just make the difference.
Any and all help is very appreciated, thanks...
Have you been able to use any other bluetooth device successfully? And have you checked the compatibility of that device with your phone? From what you're telling me, it seems very much like a bluetooth device compatibility problem, which is the same issue I had when I had a custom ROM flashed with my old HTC Rezound
nrkid9 said:
Have you been able to use any other bluetooth device successfully? And have you checked the compatibility of that device with your phone? From what you're telling me, it seems very much like a bluetooth device compatibility problem, which is the same issue I had when I had a custom ROM flashed with my old HTC Rezound
Click to expand...
Click to collapse
Absolutely not a bluetooth device incompatibility.
All bluetooth devices I have tested (3 different models total: 1 car stereo and 2 different earpieces) work just fine when NOT in CAR mode.
The HTC One (M7) treats a bluetooth button press the same as any other android phone when NOT in CAR mode.
It will bring up a different dialer which uses voice commands and this works fine.
Answering phone calls and dialing out via bluetooth work on both earpieces when not in CAR mode.
The car stereo also starts the voice dialer when NOT in CAR mode, same as the 2 earpieces that were tested.
ONLY CAR mode will start SPEAK when pressing the same bluetooth button.
However as I described above, You can successfully use all 3 bluetooth devices (audio is routed through all 3 devices' microphones and speakers) if you press the SPEAK icon in CAR mode.
Pressing the bluetooth button to start SPEAK causes the fail on all 3. Sounds like the SPEAK app to me but I/we won't know without more feedback.
Thanks for the suggestion but I have now successfully tested 3 different devices that can START and HANGUP and REDIAL calls but the same 3 fail when pressing the bluetooth button in CAR mode hence I am trying to verify if others experience the same results.
Do you have a bluetooth earpiece or car stereo with bluetooth to test yours with?
I sadly don't have a device that I can test with my phone at the moment. I will see if I can dig one up and test it on my own. Have you tried going to your carrier and resolving the issue with them? I'm sure they'll be happy to replace the phone if it's still under warranty (seeing as it just came out, it should be) and the issue is legitimate.
nrkid9 said:
I sadly don't have a device that I can test with my phone at the moment. I will see if I can dig one up and test it on my own. Have you tried going to your carrier and resolving the issue with them? I'm sure they'll be happy to replace the phone if it's still under warranty (seeing as it just came out, it should be) and the issue is legitimate.
Click to expand...
Click to collapse
Replacing a phone with a design flaw just gets me another phone with a design flaw. That is why we need to test it here and verify what results we all get.
I have the EXACT same problem using Bose 2 Bluetooth headset!
IIHomieII said:
This is such a simple problem..
I tried explaining this to HTC tech support but they only have AT&T phones to look at and hold when customers call in.
The AT&T HTC One (M7) phone uses a custom setup for its car dock mode.
I am asking anyone who does NOT have the AT&T version to do a simple car dock mode test.
Here is the problem:
In Car Dock mode (whether you launch it via the app drawer or you plug it in to the official dock which launches it for you) in the bottom right corner is the SPEAK icon.
Launching SPEAK will enable you to call someone or search for music by voice (simple) it also has confirmation though unlike Google Voice Dialer or Google Voice Search.
(there is no icon in the App Drawer) it is only accessible in CAR Mode.
The problem is when you launch it, by design it searches through your contacts and music for just a few seconds to check if you have new contacts or music since the last time you launched it and becomes aware of them. So when opening SPEAK it says on the screen:
"PLEASE WAIT A FEW SECONDS WHILE UPDATING CONTACTS AND MUSIC".. (not the exact wording but close enough)
(it also says audibly via the speakers "PLEASE WAIT" (again, not the exact wording but close enough)
Then when its done searching (about 1 - 3 seconds) it makes a tone and starts listening for your commands.
This works perfect and its a great feature when driving.
NOW HERE IS THE PROBLEM I NEED TESTED:
When a bluetooth device is connected it will hang on the screen where it says:
"PLEASE WAIT A FEW SECONDS WHILE UPDATING CONTACTS AND MUSIC".. (not the exact wording but close enough)
At this point you should hear "PLEASE WAIT" (again, not the exact wording but close enough) but that NEVER happens, it just hangs there until you disconnect the bluetooth device and then reconnect it. Upon the bluetooth device reconnecting it finishes searching and works without any problems.
NOW PLEASE READ THIS CAREFULLY..
It works with a bluetooth car stereo, headset, etc just fine if you launch the SPEAK app from the Car Dock icon. All is spoken through the bluetooth device and all is perfect like you would expect.
Its ONLY when launching it via your bluetooth button that it hangs.
So the audio stream is working either way, but its the initialization from the bluetooth device that causes the hang..
THIS IS SO SIMPLE TO TEST FOR ANYONE WITH A BLUETOOTH CAR STEREO, HEADSET, ETC. EXCEPT FOR HTC BECAUSE THEY ONLY HAVE THE STUPID AT&T VERSION AT HTC TECH SUPPORT (argh!)
I managed to get it to work back to back successfully only once but I can not get it to do it again.
IF I can get a few people to verify this flaw we can get a fix started via HTC.
I tried to report the problem to them but they can not see what I am talking about so directing them to this forum after others verify it might just make the difference.
Any and all help is very appreciated, thanks...
Click to expand...
Click to collapse
Voice dialing does not work on my T-mobile HTC one with my JVC stereo either. I have exactly the same symptoms you describe. My nexus one with CM 7.1 works perfectly and has for the last two years - so I know the issues I have are not related to my stereo.
Other things that work perfectly on my nexus one but are broken on the HTC one include:
AVRCP play / pause commands in music
AVRCP play / pause command in beyond pod
Wifi tethering
Notification light (HTC one light only flashes for five minutes, or not at all if connected to power)
Google voice (resets to T-mobile voicemail every few days)
Does not seem to get push notifications (have to wake the phone to check email, etc – presumably this is for power savings, but despite this nexus one has better battery life)
I think I am going to return the HTC one and wait for the next nexus device. The camera, speakers and screen are great on the HTC one, but every one of the above issues is a deal breaker for me (I use car mode / AVRCP a LOT). I’d consider cyanogen mod, but the lack of native camera support (optical image stabilization, low light performance, etc) due to no HTC camera driver source code / reliance on sense UI removes one of the biggest advantages this phone has over a nexus phone. I think I could stay with sense and root / hack a fix to all of the above problems except for voice commands in car mode (the original topic of this post) – I have no faith HTC will ever fix this. I tried using google search / voice commands as a replacement, but could not get that to work either. If anyone has a workaround for this issue please let me know, as that would be the difference between me keeping and retuning this phone. I have spent a month trying to like this phone, but it has too many software issues (above plus no recent apps button, menu overflow button). My nexus one just works – no need to research hacks on XDA to fix HTC and T-mobile limitations.
IIHomieII said:
This is such a simple problem..
I tried explaining this to HTC tech support but they only have AT&T phones to look at and hold when customers call in.
The AT&T HTC One (M7) phone uses a custom setup for its car dock mode.
I am asking anyone who does NOT have the AT&T version to do a simple car dock mode test.
Here is the problem:
In Car Dock mode (whether you launch it via the app drawer or you plug it in to the official dock which launches it for you) in the bottom right corner is the SPEAK icon.
Launching SPEAK will enable you to call someone or search for music by voice (simple) it also has confirmation though unlike Google Voice Dialer or Google Voice Search.
(there is no icon in the App Drawer) it is only accessible in CAR Mode.
The problem is when you launch it, by design it searches through your contacts and music for just a few seconds to check if you have new contacts or music since the last time you launched it and becomes aware of them. So when opening SPEAK it says on the screen:
"PLEASE WAIT A FEW SECONDS WHILE UPDATING CONTACTS AND MUSIC".. (not the exact wording but close enough)
(it also says audibly via the speakers "PLEASE WAIT" (again, not the exact wording but close enough)
Then when its done searching (about 1 - 3 seconds) it makes a tone and starts listening for your commands.
This works perfect and its a great feature when driving.
NOW HERE IS THE PROBLEM I NEED TESTED:
When a bluetooth device is connected it will hang on the screen where it says:
"PLEASE WAIT A FEW SECONDS WHILE UPDATING CONTACTS AND MUSIC".. (not the exact wording but close enough)
At this point you should hear "PLEASE WAIT" (again, not the exact wording but close enough) but that NEVER happens, it just hangs there until you disconnect the bluetooth device and then reconnect it. Upon the bluetooth device reconnecting it finishes searching and works without any problems.
NOW PLEASE READ THIS CAREFULLY..
It works with a bluetooth car stereo, headset, etc just fine if you launch the SPEAK app from the Car Dock icon. All is spoken through the bluetooth device and all is perfect like you would expect.
Its ONLY when launching it via your bluetooth button that it hangs.
So the audio stream is working either way, but its the initialization from the bluetooth device that causes the hang..
THIS IS SO SIMPLE TO TEST FOR ANYONE WITH A BLUETOOTH CAR STEREO, HEADSET, ETC. EXCEPT FOR HTC BECAUSE THEY ONLY HAVE THE STUPID AT&T VERSION AT HTC TECH SUPPORT (argh!)
I managed to get it to work back to back successfully only once but I can not get it to do it again.
IF I can get a few people to verify this flaw we can get a fix started via HTC.
I tried to report the problem to them but they can not see what I am talking about so directing them to this forum after others verify it might just make the difference.
Any and all help is very appreciated, thanks...
Click to expand...
Click to collapse
The Renovate ROM is fantastic you should really give it a try, the only thing that still does not work is the HTC speak app, but everything else you mentioned above I have not seen any problems with my mine.
They have updated the Renovate rom to 2.0 but I'm still running 1.0 with no issues at all.
I love the rom, the phone is fantastic except for the one issue with the voice dialer which eventually they will release an update for. You need to change the play/pause button when rooted to be the same key (key 200) if thats the problem.
I also set my forward track button to bring up Google search when long pressed, its great for driving to be able to long press a button on the stereo that I don't really use in that way already to do a Google voice search. I then use llama to return back to car dock mode after 20 seconds so that way I can get my results read to me from Google through the JVC so then it automatically goes back to car dock mode after long pressing the foward track key.
I can verify the same behavior. I came in looking for a MacGyver fix for the dock slipping and found this. When just connected to my headset no issues, but also add the car stereo in the mix and even with my headset I get the endless delay. I have always flashed my phones as soon as possible but with this I think I am going to wait and see what ROMS the senseless edition might bring that sounds imminent. Although I think I may be the only one who LIKES blinkfeed.
I like blinkfeed too.. I know some people complain about it, it's a sweet feature if you ask me but can't please all the people all the time..
I've now also an issue with my dock in that when I dock the phone it goes in to car mode, but then straight away opens up "Display Settings" even if i go "home", a few seconds later it opens it back up. Annoying, don't want to do a factory reset just yet.
Hi, I've got this issue too on my European HTC One with plantronic Discovery 975 headset
Hey All,
So, I've been searching all over for an answer to this, I've found a lot of information about S-Voice's problems being used over a bluetooth device but I haven't been able to find any direct discussion of the issue I'm experiencing.
What I've found is that when I have S-Voice's voice wake-up feature enabled, it'll work totally fine with bluetooth off. However, as soon as I toggle bluetooth on the wake-up feature just completely stops working. I don't even need to be connected to a device, as long as bluetooth is on S-Voice Wake-Up does not work. I can manually launch S-Voice and it will hear me just fine, but saying the wake-up command does nothing. As soon as I toggle bluetooth back off, it'll wake up again just fine. I do get that with a bluetooth device connected the microphone on the device needs to be active, so I could understand if this was happening while I was paired with a headset or something, but it seems really odd to me that just having bluetooth on at all would disable the wake-up command feature.
I did try Ok Google and found that it works whether bluetooth is on or off, but I really like the increased functionality that S-Voice offers and I think that for the most part the updates Samsung has done on it are great, so I'd like to get this working if possible.
Has anyone else experienced this, either on the Note 4 or on any of the other Galaxy devices? Anyone have any ideas or solutions?
Thanks!
I'm having the same issue with svoice, thought it was just the bluetooth in the car at first til I red your post
Widespread
I've got exactly the same problem.... Lovely new note 4 which is forcing me to use my hands on the phone whilst driving... Samsung need to think about this.
Apparently an issue for a few years due to Bluetooth /svoice conflicts, but not acceptable to leave it unaddressed.
I can still use my car system to skip music tracks on the phone, or dial numbers from the car stereo touch screen, but surely this is one of the most valuable areas for voice control?!
Bluetooth off then everything works fine, but Bluetooth on and svoice just fails. No wake up or voice recognition.
I don't use a headset, and the car doesn't have an inbuilt mic, so phone mic is used for calls (which is still fine incidentally.. Only svoice which is screwed.)
Looking forward to someone finding a simple solution to this, as I have spent hours in the menus trying to make a difference but Samsung might have just let us down I'm afraid... And if that's the case then I look forward to hearing them fix it, and update our ware to get everyone on track again.
Resolved and simple
After much fckin about I managed to get this sorted and the answer is simple..... You can't have both apps always trying to recognise the voice all the time.
Go to the settings for ok Google and voice detection then always on... Uncheck it and suddenly svoice is working again... On my way to the car for final checking now,but preliminary checking says all should be good.
Nope
Ok... It works until the system is fully connected.
As soon as the connection is made then the handset microphone switches off again.
Note 4 s voice is officially dangerous to Road users and Samsung are ultimately proving themselves irresponsible for creating a system which forces use of hand and eye coordination when in Bluetooth and car mode.... Seriously Samsung... Sort this sht out.
When driving, set to hands free mode, this allows use of svoice on bluetooth
Ooof said:
Ok... It works until the system is fully connected.
As soon as the connection is made then the handset microphone switches off again.
Note 4 s voice is officially dangerous to Road users and Samsung are ultimately proving themselves irresponsible for creating a system which forces use of hand and eye coordination when in Bluetooth and car mode.... Seriously Samsung... Sort this sht out.
Click to expand...
Click to collapse
Note 4 and above have it listed as car mode.
svoice works perfectly with blue tooth when car mode is enabled.
Set it up at home before you use it the first time.