I put rogers firmware on had the phone saying it was a x10a and rogers in system info.
i tried the jit v002 and after all is said and done the phone now says x10i not sure why and nows said world in the system info?
has this happened to anyone else i still have the rogers splash screen .
Thanks
It replaced your default.prop file with the World Generic X10i one.....hence why it has changed.
Related
Dear all,
i updated my X10i from RB1A014 into RB2A020 (Singapore) , then, i was trying to root it, but unfortunately i root it with wrong flash tool (that meant for R2BA024 >> R2BA026)...
I then go back to SEUS to refresh my X10i (Singapore should only up to R2BA020) , and now the number stay at R2BA026.... I was very puzzled... Is it a real "026", or because the system files had been over written by the flash tool i used wrongly?
How do I do to root my x10i, and to update to R2BA026??
Please advice....
Thank you...
Go to the X10 lock screen, and do this key sequence.
Menu Back Back Menu Back Menu Menu Back
Then go to Service Info -> Model Info to find out which ROM brand you are using.
Then for firmware version checking. Go to Settings -> About Phone then scroll down.
If it shows R2BA026 then it is R2BA026.
You can always redo the whole rooting step all over again to get at least R2BA024 with root access. I don't know how to get R2BA026 with root access.
xeviro said:
Go to the X10 lock screen, and do this key sequence.
Menu Back Back Menu Back Menu Menu Back
Then go to Service Info -> Model Info to find out which ROM brand you are using.
Then for firmware version checking. Go to Settings -> About Phone then scroll down.
If it shows R2BA026 then it is R2BA026.
You can always redo the whole rooting step all over again to get at least R2BA024 with root access. I don't know how to get R2BA026 with root access.
Click to expand...
Click to collapse
So, Xeviro, had you did any update recently? What is your X10i software status?
i haven't try to do update again on SingTel firmware yet. now running R2BA024 with root access. i have my SingTel firmware decrypted and can be flashed with flashtools, later next new root comes, i will try. I doubt they have new update for Singapore firmware, last time people having update 23 already while SingTel still stucks with 14.
your's is also from SingTel?
i am Starhub user, and i update the firmware via SEUS...
the first time i update it was version 20...
then, i completed the step1 of flash.. then realise i do it wrongly.. and stop there...
then, i go refresh my X10i with SEUS, and then, it shows version 26...
anyway. no worry. if your aim is FW 26 with root access. just go through this steps
http://forum.xda-developers.com/showthread.php?t=740240 or you can follow the main root thread.
just redo the whole root process again without worry, X10 is hard to brick
If you want to go back to StarHub FW (is there's any) then hopefully you have the previous ROM FW14 or FW20 in back up, then you can reflash again or even decrypt it.
If don't have StarHub FW in back up, then you might need to find other X10 with StarHub FW to make a backup so later you can use to reflash in case you need to go see CS for repair or anything.
Also maybe there are possibility that StarHub is using other different FW than SingTel that might have FW26 ready for update. You just key in the key sequence and check for the phone FW brand.
By the way is the first FW installed in the phone for StarHub X10 have any StarHub customization inside? My SingTel X10 have Live Traffic in Timescape. If it doesn't have any maybe its Generic FW.
so basically i have generic x10i uk r2ba020 f/w on my rogers x10a phone..
i kept having problems with wifi and i'm thinking it might be because of the firmware i have currently, so i want to bring it back to x10a (rogers f/w)
however, i've tried the flashtool in jerpelea's thread, the one-click apk file, and they both keep giving me this error
right after i connect the phone in flash mode, i get
'invalid or corrupt 'jar' file'
i can't use omnius because i need to purchase licenses and it's no longer free..
is there any other way for me to get this phone back to x10a??? i'm really worried that i won't even be able to update to 2.1 when the update comes out..
-----------
edit : can't seem to delete this thread...
i couldn't get it working on xp, but after many tries, I got the file working on win7, with one of the problems being the deviceid.txt being saved as unicode not ansi...
anyhow.. everything works now. thanks
Hi, I am having this issue from last week.
Basically, I can not turn on the phone with the SIM card inside. Once the phone turns on, everything is fine. If i remove the SIM the phone turn on normally.
1- I did a repair with SEUS
2- I change the SIM card four times.
3- Once it is turned off I can turn it on connecting the USB cable and pressing the back button for a few seconds.
My firmware version is 1.1.A.0.8 there is no new updates in my area, my phone is unbranded and rooted.
The question is: Anyone else has this problem here?
I had this problem, i just updated my x10 mini to the last version 1.2.A.xxxx and solve my problem!
Good luck!
Sent from my E10a using XDA App
Thanks. But that firmware is not available in this zone yet... I will burn all the SE's offices Argentina.
You have to load the Generic UK one in the Mini android dev thread , then you can see the new update
siddharthsai said:
You have to load the Generic UK one in the Mini android dev thread , then you can see the new update
Click to expand...
Click to collapse
Generic UK is E10i, I have an unbranded E10a... If I install a generic E10i UK 3g stop working.
My father in law in visiting has an X10i (on 1.6) that he purchased from the Middle East. I've been trying to update through SEUS and no luck; it keeps saying that I have the latest software.
Questions:
1. Is the 2.1 update available for all X10i? or not yet all?
2. How can I check the phones region?
3. Should I update using one of the decrypted roms in the forum? if yes then can someone who's done recommend one please?
Thank you so much in advance.
first on the lock screen press ( Menu, Back, back, menu, back, menu, menu, back )
then service info>Software info>
then you can see which software you got in your phone, if it says World Generic then it means that you should get the update.
My X10i is from the Middle East and my region was world generic, so I managed to get the update.
Tip: sometimes the SEUS says that you have the latest software (1.6) but when clicking on re-install it will install the device to 2.1 update
Thanks for the response. I did the the menu back thing, and it shows that my software is "Generic" not "world generic". I did a search for update on SEUS and SE PC Companion and still nothing, then I did a repair and it downloaded 1.6 again.
How can I update to 2.1?
Anyone? this is my soft v 1227-4612_r2ba026 generic
I've got the same code as you and have had no luck with SEUS or PC Companion.
I have repaired or installed with both Friday and Saturday and I just get 1.6 re-installed.
i have flashed my at&t x10a into Nordic generic and i still cant get it to update to 2.1
I am in Virginia, US. Software Update still does not find Android 2.1. I am still on 1.6.
Sent from my X10i using XDA App
back in november when Brazil 2.1 for X10a came out I did the upgrade by changing my default.prop to the Brazil values (1234-4836) from 3 australia and then doing a repair. It upgraded OK (it was the Brazilian version because I had Orkut and a couple of other apps) and was working perfectly. A couple of days ago the android market was upgraded and last night I noticed that they fixed it up. Today when I use the market it causes a reboot and when looking into this I noticed that my phone is now showing it is a X10i. Looking in the build.prop file its showing as X10i_1232-9897 which is GLOBAL-GGL GENERIC. Is this correct in that I upgraded to X10a Brazil software but it is showing as x10i global ?
You probably used the optimizer or something like that? It changes the device to x10i.
yes, jited the phone a week or so ago. Is it going to cause a problem with an x10a being identified as an x10i ?
mentat6059 said:
yes, jited the phone a week or so ago. Is it going to cause a problem with an x10a being identified as an x10i ?
Click to expand...
Click to collapse
i think not..
but just try all the function to conform...
mentat6059 said:
yes, jited the phone a week or so ago. Is it going to cause a problem with an x10a being identified as an x10i ?
Click to expand...
Click to collapse
You can edit the buid.prop(edit this for 2.1) and change it back to X10a and the correct CDA
http://forum.xda-developers.com/showthread.php?t=824711
either the Root Explorer or ADB method will work. Will also get you back to the Brazil updates when they come up
Thanks, I assume where it has ro.product.name=x10i_1235-7379 I change the x10i to x10a (as well as all other ocurrances of x10i) ?
mentat6059 said:
Thanks, I assume where it has ro.product.name=x10i_1235-7379 I change the x10i to x10a (as well as all other ocurrances of x10i) ?
Click to expand...
Click to collapse
Yes and also change the X10a_XXXX-XXXX to whatever customization you are running.
mentat6059 said:
Thanks, I assume where it has ro.product.name=x10i_1235-7379 I change the x10i to x10a (as well as all other ocurrances of x10i) ?
Click to expand...
Click to collapse
Yes, there are 3 xxxx-xxxx and six (?) X10x,
Install Service Menu app, under Service Info, Model info you should see X10a,
under Service Info, Software Info, Customization Version should be 1235-7379
----------
im_iceman said:
Then using root explorer I edited "build.prop" from within the system folder.
I changed
ro.semc.version.cust=xxxx-xxxx
and
ro.product.name=X10_xxxx-xxxx
I changed the xxxx-xxxx to 1232-9897 (World generic)
saved the settings and exited from the file.
I also changed the ro.semc.version.cust=xxxx-xxxx file in...
/etc/customization/settings/cust.prop
saved and exited.
Then I switched the phone off and on again..
Then off one more time..
Then I used SEUS...
It will say that you have the latest software (because you do!).. but if you do a repair then it will replace your current one with the one associated with the codes you entered...
and bingo.. job done..
CODES here..http://forum.xda-developers.com/showthread.php?t=826875
Make sure you use the first of the codes for your brand/region.
Obviously this only works with firmware that has been released into SEUS.
UPDATE - IF SWITCHING BACK TO A REGION THAT YOU WERE PREVIOUSLY ON YOU WILL NEED TO DO THIS...
(Courtesy of ARKEDK's 1.6-2.1 method!)
Clear out your db folder in either PC Companion or SEUS, which ever one you use.
Press your Windows Key+R or type "run" in your start menu.
Then insert the path to what ever program you use and press enter.
Then delete the folder named with numbers in it.
SEUS db folder can be found here:
Code:
%programfiles%\Sony Ericsson\Update Service\db\
PC Companion db folder can be found here:
Code:
%programdata%\Sony Ericsson\Update Engine\db\
Reboot your phone and use SEUS to re-install your phone to 2.1.
Upgrading from 1.6 to 2.1 - this method was the one I used.. http://forum.xda-developers.com/showthread.php?t=824711
Click to expand...
Click to collapse
- [TUTORIAL] -Simple way to switch from one 2.1 version to another