Dont know if this is the right section but does anyone have any idea on what i can do? my phone cant get into recovery or download mode after flashing a rom. it just remains on the screen that says Vibrant and Samsung... no, it didnt have a lagfix so no voodoo was enabled....help please!! thank ya
Not the right section but...
Battery pull your phone then put it back
Plug in the USB
Hold both volume buttons down
THen press power button (while still holding volume up&down)
The screen should pop up with something (vibrant, phone!computer, etc)
Once that happens, let go of the power button (BUT NOT THE VOLUME!)
should get into download mode
Yea, i tried all of the little button combinations to get to either recovery or download..... nothin happened! im not new to this so i know about how to actually get there but its just not doing it now.....thanks anyway though!
Home made jig time
Sent from my SGH-T959 using XDA App
Go to the vibrant directory thread, there is a link there for the jig,i think thats the only thing you can do now! That work for me, good luck!
Sent from my SGH-T959 using XDA App
ADB is your friend.
>adb reboot download
Voila!
Yes. Wrong section.
Its takes longer when tryin to enter download mode from the soft brick try it again n wait
Sent from my SGH-T959 using XDA App
These instructions worked perfectly for me.
http://www.youtube.com/watch?v=rqxearzXrVY
Ctp3 said:
Dont know if this is the right section but does anyone have any idea on what i can do? my phone cant get into recovery or download mode after flashing a rom. it just remains on the screen that says Vibrant and Samsung... no, it didnt have a lagfix so no voodoo was enabled....help please!! thank ya
Click to expand...
Click to collapse
I was pulling my hair out for a day messing with the same issue
Turn your phone off
Hold down the volume up + down and plug in UBS
Thats it!
It may sound stupid to you. But after numerous time trying to get to download mode, I succeeded by I pulling the microsd ou .
Yea, it finally worked....i just tried different button combinations n lucked up...thanks u guyz.... Im back in business
Sent from my SGH-T959 using XDA App
Good, now nuke thread.
metalman3797 said:
I was pulling my hair out for a day messing with the same issue
Turn your phone off
Hold down the volume up + down and plug in USB
Thats it!
Click to expand...
Click to collapse
this is the easiest method out there and should be sticked.
it doesnt matter if its connected to a wallcharger or pc, it will work no matter what.
works for me EVERY time.
I had the same issue yesterday after an ODIN flash failed. On the CM forum, I believe, was instructions, linked in the Vibrant Bible.
1. Pull SD and SIM
2. Plug USB to phone
3. Plug USB to PC
4. insert batter and wait for the icon to come up showing that your battery is charging
5. Hold Vol UP and DOWN, press power, hold power ONLY until the screen goes black, then release.
6. Continue to hold Vol Up and Down.
This SHOULD bring you into Download mode so you can connect ODIN again. Worked for me after a few tries. Don't give up, keep trying (Even though you want to either whack your forehead or throw the phone)
Another way I have seen it listed is to do all of the above until the inset battery part, and skip the waiting to see the battery charging icon. Hold the buttons with the USB connected, then insert the battery with the buttons pressed.
Hope that helps you out, as I know how frustrating it can be to have a soft brick on your hands.
r3skyline said:
this is the easiest method out there and should be sticked.
it doesnt matter if its connected to a wallcharger or pc, it will work no matter what.
works for me EVERY time.
Click to expand...
Click to collapse
Glad i could help, i figure it would save some Vibrants from being thrown out a window lol
use odem for ur phone
You_are_the_man.
Originally Posted by metalman3797
I was pulling my hair out for a day messing with the same issue
Turn your phone off
Hold down the volume up + down and plug in USB
Thats it!
Click to expand...
Click to collapse
this is the easiest method out there and should be sticked.
it doesnt matter if its connected to a wallcharger or pc, it will work no matter what.
works for me EVERY time.
Click to expand...
Click to collapse
agreed, best method ever!!!! just pretty much turned my day around lol.
Related
I've tried every possible combination ... literally tried everything and this quote from this thread http://forum.xda-developers.com/showthread.php?t=771247 just comfirmed it to me
METHOD 4: STUCK AT PHONE ! COMPUTER:
(and are not able to use vol+ vol- methods to access downloader/recovery)
CALL TMOBILE AND BEG FOR THEM TO REPLACE UR PHONE..
i cant believe its that easy to mess up your vibrant, my g1 never gave me a problem
did you try:
1. Phone starts OFF
2. Hold volume up + volume down buttons
3. Plug in USB cable
That is how I get into download mode. You don't ever hit the power button and you plug in the USB cable WHILE holding down the volume buttons.
El Cipitio said:
I've tried every possible combination ... literally tried everything and this quote from this thread http://forum.xda-developers.com/showthread.php?t=771247 just comfirmed it to me
METHOD 4: STUCK AT PHONE ! COMPUTER:
(and are not able to use vol+ vol- methods to access downloader/recovery)
CALL TMOBILE AND BEG FOR THEM TO REPLACE UR PHONE..
i cant believe its that easy to mess up your vibrant, my g1 never gave me a problem
Click to expand...
Click to collapse
El Cipitio!!!!!!!
[do you eat ashes?] j/k
anyway... I'm sure there's a fix.
I *think* there's a fix.
ndhr3d said:
did you try:
1. Phone starts OFF
2. Hold volume up + volume down buttons
3. Plug in USB cable
That is how I get into download mode. You don't ever hit the power button and you plug in the USB cable WHILE holding down the volume buttons.
Click to expand...
Click to collapse
This is the way, no power just volume up an volume down, or just volume down with the same method. Be sure you remove your sd and sim cards also.
Sent from my Vibrant running Bionix Final w/Jacs and Voodoo using XDA App
What has always worked for me is:
1. Power off the phone
2. Plug it in via USB
3. Wait for the green battery symbol to pop up
4. Hold vol. down and the power button until the Download screen pops up.
MrDragomir said:
What has always worked for me is:
1. Power off the phone
2. Plug it in via USB
3. Wait for the green battery symbol to pop up
4. Hold vol. down and the power button until the Download screen pops up.
Click to expand...
Click to collapse
I have a hardware locked phone and have been stuck at the phone to computer link screen (a rather nervous place to be, I might say). First you need to take the battery out (to turn the phone off). Then you plug in the USB with the battery out. Then you put the battery in. You need to get the battery charging indicator, and I can't remember if you need to unplug/replug USB for that or not. Then you hold down both volume buttons and the power button. The *second* time you see Vibrant (phone reboots twice) let go the power button. You should end up in download mode.
I have the same issue, and when i try to do this:
JJMT said:
I have a hardware locked phone and have been stuck at the phone to computer link screen (a rather nervous place to be, I might say). First you need to take the battery out (to turn the phone off). Then you plug in the USB with the battery out. Then you put the battery in. You need to get the battery charging indicator, and I can't remember if you need to unplug/replug USB for that or not. Then you hold down both volume buttons and the power button. The *second* time you see Vibrant (phone reboots twice) let go the power button. You should end up in download mode.
Click to expand...
Click to collapse
it resets back to the battery icon.
Basically, im in the exact same situation as El Cipitio. i tried EVERYTHING!!! no luck at all...
Can adb still see your phone? I'm guessing no, but if it can just use "adb reboot downlaod".
Then again.... you guys are aware that the "hardware locked" issue was fixed almost two months ago right? One of the members posted a thread with a zip and the JI6 update also fixed this. There fore if you didn't flash either you should call Tmo, but if you have, then you're just doing it wrong... GL either way.
ahbad said:
I have the same issue, and when i try to do this:
it resets back to the battery icon.
Basically, im in the exact same situation as El Cipitio. i tried EVERYTHING!!! no luck at all...
Click to expand...
Click to collapse
One other thing to try is to remove the sim and external sd card and try the instructions I posted again. Really, if you get the pc to phone connection icon, you can get it into download mode and use odin to flash.
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Might be a fix????
intruda119 said:
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Some one posted this in another thread. My brick got sent back before I could try this.
http://forum.xda-developers.com/showthread.php?p=8822843
This is how I got it to work....
1. Take out the battery
2. Plug the USB into the phone
3. Plug USB into the PC
4. Hold down the Volume up/down + Power button with one hand
5. Put the battery back in with the other hand
6. Wait for the phone2pc icon to flash 2 times and on the second time when the screen goes black release only the POWER BUTTON
7. When you see the digging Android you can let go of the Volume buttons
That is the only way I could get it to work
No, I can't get it into adb mode. The phone bootup screen comes (vibrant, the pink tmobile thing, then galaxy s), but then it goes black. The computer doesn't find anything during this time.
I don't really have time to do the soldering, so i'll try calling samsung. Problem is i live in toronto and bought this thing for cash, so i have no clue what to tell samsung lol. If that doesnt work, i guess soldering it is...
Try this:
unplug, remove battery, remove sim/sd cards
hold down volume control buttons
plug into wall adapter (usb charger - not to computer but to outlet)
pop battery in
Took me a couple tries, but I got my Vibrant into dl mode from nothing but a black screen (I could not register charging, or "phone ! pc" error)
intruda119 said:
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I'm am referencing more to the fact that these phones are not "hardware" locked. Hardware would refer to the volume & power keys not working... When your phone is on they work right?
Like stated before, IF, your phone is "hardware locked" look to either use the script or flash JI6. This way you re-gain functionality of the recovery & dl mode before flashing anything!
Ditto.. i got mine back after flashing without removing the lag fix.. never again... i will wait for froyo.. if that ever happens...
May I ask what bricked you?
nomadrider123 said:
Some one posted this in another thread. My brick got sent back before I could try this.
http://forum.xda-developers.com/showthread.php?p=8822843
Click to expand...
Click to collapse
The brick, in atleast my case, was from untimely removal of the phone from USB during Download mode of flashing stock kernal via Odin. This method described in the link above worked for me in getting the phone to boot into download mode without the use of the hardware keys (aka hardware locked phones). I also contacted Samsung directly through their Galaxy tech line, and they said I could send it in for free with their shipping label and if they couldn't flash back I could get a replacement, but there was a about a 2 week window I would be looking at without a phone, so I tried the homemade download-boot circuit and it worked perfectly.
THIS IS YOUR FIX!!!
I just did this the other day. If you are still stuck with the phone/!/computer screen do the following:
1.Hold the volume up/down + power button simultaneously
2.The screen will go black / reappear/ then go black again...when this happens, release the power button and continue holding the volume up/down button
3.Welcome back to download mode!
Please Mods, please lock this thread
Please stop waisting everyones time with stupid instructions.
When a phone is "hardware locked" (that is, bad flash/missing the sbin file.....)
YOU CANNOT GET INTO DOWNLOAD MODE OR RECOVERY WITH ANY KEY COMBINATION.
Stop waisting your time trying anything cause its not going to work. And thats a Fact.
Final fix and summary to this thread,
Either call T-mobile or Samsung.
Finish.
Hi all, i am running the latest version of Bionix i went to hit the reboot option and accidentally selected the download mode button. I pulled the battery out before it fully shutdown, me being impatient. When i put the battery back in the phone immodestly turned on and tried to boot, and stays on the vibrant screen for about 2-3 seconds then shuts off and try's to boot back up again on its own. Also when plugged in it continues to boot loop, it never shows that it is charging, only the battery with the loading circle, then ****s off and repeats.
I am not new to modding, and i am not new to getting my phone into recovery or download mode. The problem is the phone does not respond to the hardware keys, and i am positive that it used to be able to reach download mode via keys, i do not have a hardware locked vibrant.
I guess my question lies in the realm of another way to reset the phone, maybe via shorting pins or something? Does anyone know of an alternate method that does not rely on keys or software to reset the phone?
Thanks in advanced!
A jig
Sent from my SGH-T959 using XDA App
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
You might have to have odin up and running before you do the battery pull
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Good point !!!
daddysays said:
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
Click to expand...
Click to collapse
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
duboi97 said:
A jig
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Please explain.
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
almyz125 said:
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
Click to expand...
Click to collapse
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
dougstoner said:
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
Click to expand...
Click to collapse
Thanks for the info, i may look into getting/making a jig. I would be nice to have around.
daddysays said:
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Click to expand...
Click to collapse
Thanks again.
LovellKid said:
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
Click to expand...
Click to collapse
I've tried that method, it used to work for me. This soft brick is different than any other I've encountered. The phone has never automatically tried to boot when i put the battery into it, it makes things harder. But thanks and ill give it ago again.
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
almyz125 said:
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
Click to expand...
Click to collapse
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Also try different combos of being plugged in and not. And recovery or download mode. Recovery will be just as useful as dl mode.
Sent from my SGH-T959 using XDA App
daddysays said:
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
A jig is THIS, it shorts out pins in the micro usb port forcing it to download mode. I am positive i have the correct drivers and the sdk installed right. This isn't the first time I've been soft bricked and i am very familiar with DL mode and Recovery, and how to reach them traditionally. This soft brick is different though for what ever reason. I am going to have to try this jig, and if that doesn't work, i think ill have to read up about the jtag pins on it, if anyone has more information on jtaging a Galaxy S please post!
Did you ever end up trying the jig? I'm having the exact same problem you were. Thanks
I hard bricked a vibrant by trying to flash a rom on a low battery. Battery died in the middle of rebooting thus killing my vibrant with no way of recovery (seriously, charged the battery and the phone still wouldn't turn on... at all). Anyway, while trying to fix it, I actually made a jig. It's a lot easier than it sounds. You basically cut the plug that goes into your phone off of the cord down to where you can see all of the wires. Once you do that you break off the plastic shell that covers the plug. You then use a 301k resistor (I couldn't find that exact one so I bought 3 x 100k resistors and a 1k resistor then twisted them together).. plug the usb side into your phone then touch the opposing ends of the resistor onto wires 4 and 5 and it should go into download mode. You don't necessarily have to solder the resistor to the wires but you can. It makes it a bit easier considering you can't touch the wire part of the resistor or the static will mess up the voltage. Otherwise, Amazon sells jigs for a few bucks.
I wanted to post the url for the site that I found useful in making a jig but because I'm a "junior user" I can't. So if you search for "usb jig" on amazon there are a few; if you want to make one google "how to unbrick samsung vibrant" there is an article on factoidz called "How to unbrick your samsung vibrant/galaxy s" which I found to be the most useful.
Hope this helps!
I bought a jig off ebay and it worked like a charm! Worth its weight in gold! I now have a working phone again after being phoneless for 5 days.
Failed to replace stock recovery now get only there.
Hi, similar situation please help.
From stock 2.1 I rooted with King root Chinese zip then to go for a new ROM I renamed a cwm zip in update.zip and I read replacing stock recovery..... and saw this cwm just a couples of times, as it revert to stock recovery and doesn't switch on anymore, show grey battery logo fixed when charging, and now after removing the battery for long it goes in stock recovery se2 , cleaned cache and data but nothing change.
Is there please a solution without PC?
Thanks
Every once in a while this "download mode" comes up. I had left my phone in my room and it died while i went quickly to the neighbors. When I came back, I found my phone in this download mode. Ive seen it before and I get to it randomly. Any insight?
When you turn on your phone by holding the vol+/- and power with the USB plugged in, this is what shows up. So I'm guessing that's what's happening.. I'm not sure. Wait for an expert on the subject.
Blaze9 said:
When you turn on your phone by holding the vol+/- and power with the USB plugged in, this is what shows up. So I'm guessing that's what's happening.. I'm not sure. Wait for an expert on the subject.
Click to expand...
Click to collapse
heres the thing. My phone was completely untouched and the charger was not plugged in. Its a totally different download mode.
So, I've seen this particular download mode come up when I go into download using the adb reboot download command. The volume up-down method brings up the download mode with the number of flashes and the other warnings. Not sure what the difference is.
Sent from my SAMSUNG-SGH-I777 using XDA App
Is it a stock ROM or you have any other ROMs and a custom kernel? AFAIK, The only way to enter download mode other than the physical key combination is to let the kernel know before it is rebooting - like 'adb reboot download' and using some custom options found in other ROMS..
Sorry, i have Serendipity 8 and kernel is Entropy. Ive experienced the same on UnNamed as well. Not a big deal. Its just a pain having to pull the battery because its a tad hard to remove it from the case.
eddies92 said:
Sorry, i have Serendipity 8 and kernel is Entropy. Ive experienced the same on UnNamed as well. Not a big deal. Its just a pain having to pull the battery because its a tad hard to remove it from the case.
Click to expand...
Click to collapse
I think you don't need to pull the battery out. Keep pressing the power button until the phone switches off. Again press the power button so that the phone boots again..
I tried that with no luck lol
vineethrp said:
I think you don't need to pull the battery out. Keep pressing the power button until the phone switches off. Again press the power button so that the phone boots again..
Click to expand...
Click to collapse
eddies92 said:
I tried that with no luck lol
Click to expand...
Click to collapse
This does work to reboot the phone without pulling the battery. You can also hold the power button until you see the first boot logo.
I have no problem rebooting from download mode by holding the power button. Usually takes about 10-15 seconds to work.
Sent from my SAMSUNG-SGH-I777 using XDA App
Quick question guys, i was flashing the Linda voice on my vibrant, when all of a sudden it went to a blank red screen. did a battery pull but now its dead. it wont charge, wont go into download or recovery, odin doesnt work, nothing. Advice?
Press and hold power, then press Volume Up. You'll get red text. Plug your USB cable into your computer, then into your phone. Press and hold Volume up + Volume Down + Power until it reboots. Depress Power, it will reboot to Download mode. Flash away.
WhiteBoyAwesome said:
Quick question guys, i was flashing the Linda voice on my vibrant, when all of a sudden it went to a blank red screen. did a battery pull but now its dead. it wont charge, wont go into download or recovery, odin doesnt work, nothing. Advice?
Click to expand...
Click to collapse
YESSSSSSSSS!!! I love when noobs brick their phones without following procedures.
This SOOOOO made my day.
I agree dj, real legit entertainment
Anyways, id try every method of getting into recov and dl mode (theres like a million) and then try jtag or unbrick mod.. or you could throw it against a wall.. ive heard about this turning 1 brick into alot of smaller bricks
Sent from a cell tower to the XDA server to you.
man, who taught you how to speak? You sound so ignorant. It is people like you who ruin society.
djquick said:
YESSSSSSSSS!!! I love when noobs brick their phones without following procedures.
This SOOOOO made my day.
Click to expand...
Click to collapse
Are you serious? A fellow human came here for help to be treated like this...
Where you born expert?
Please behave with the appropriate sensitivity, thanks
---------- Post added at 12:21 AM ---------- Previous post was at 12:20 AM ----------
WhiteBoyAwesome said:
Quick question guys, i was flashing the Linda voice on my vibrant, when all of a sudden it went to a blank red screen. did a battery pull but now its dead. it wont charge, wont go into download or recovery, odin doesnt work, nothing. Advice?
Click to expand...
Click to collapse
Did you tried booting into download mod with the buttons presses?
dasunsrule32 said:
Press and hold power, then press Volume Up. You'll get red text. Plug your USB cable into your computer, then into your phone. Press and hold Volume up + Volume Down + Power until it reboots. Depress Power, it will reboot to Download mode. Flash away.
Click to expand...
Click to collapse
i tried this, along with trying a jig too. nothing appears whatsoever. just black screen.
button presses? u mean other than vol up down and power?
Connect usb+vup+vdown, then put battery in
Here try this...
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Tell me if this works for you!
N00B_IN_N33D THANK U! that worked, kinda. It got me into yellow download mode on my phone,(which is the 1st time screen has been back) but odin wont recognize it, so idk how 2 reflash to stock now without it
WhiteBoyAwesome said:
N00B_IN_N33D THANK U! that worked, kinda. It got me into yellow download mode on my phone,(which is the 1st time screen has been back) but odin wont recognize it, so idk how 2 reflash to stock now without it
Click to expand...
Click to collapse
Make sure you have the right drivers installed.
Sent from my SGH-T959 using XDA App
This is why i love XDA, ive been phoneless for a week but its all good now Thanks guys
So I was trying to put stock gingerbread on my telus fascinate 3g+ through this guide http://forum.xda-developers.com/showthread.php?t=1227807
and I didn't read about the part where you're not suppose to tick auto reboot on odin, and now my phone doesn't have any signs of life its just a black screen. I've tried using a JIG but theirs still no response. I can't get it into download or recovery mode
I had a similar black screen problem but windows was recognizing the device with the beeps.
So I did a blind up+down volume then insert USB trick. After hearing the first beep I did a blind up volume press.
Sure enough Odin displayed a connection.
From there I was able to flash 2.2.1. Once done my screen and my bricked phone came back.
murat124 said:
I had a similar black screen problem but windows was recognizing the device with the beeps.
So I did a blind up+down volume then insert USB trick. After hearing the first beep I did a blind up volume press.
Sure enough Odin displayed a connection.
From there I was able to flash 2.2.1. Once done my screen and my bricked phone came back.
Click to expand...
Click to collapse
Ok. so what you're saying is i do the volume up and volume down(hold) with the battery in then plug the usb while holding it untill i hear the usb sound then let go of both(or just the down?) and press the up+power button?
EDIT: I've tried and windows recognized it and i did the up volume thing but nothing happend and then it did the usb unplugged sound
ProjectA1xx said:
Ok. so what you're saying is i do the volume up and volume down(hold) with the battery in then plug the usb while holding it untill i hear the usb sound then let go of both(or just the down?) and press the up+power button?
EDIT: I've tried and windows recognized it and i did the up volume thing but nothing happend and then it did the usb unplugged sound
Click to expand...
Click to collapse
Have Odin running first.
You release both buttons then press volume up. If successful Odin will show as connected.
You most likely won't see anything on your screen until re-flash is done.
Edit: My Fascinate is 4G so I am not sure if the same rules apply.
murat124 said:
Have Odin running first.
You release both buttons then press volume up. If successful Odin will show as connected.
You most likely won't see anything on your screen until re-flash is done.
Edit: My Fascinate is 4G so I am not sure if the same rules apply.
Click to expand...
Click to collapse
Thanks for trying to help...I've tried about 10 times but every time it just does the usb sound and then about 5 seconds later the usb unplugged sound
Sounds like a poor connection issue yo me. Try a different cable and see if that helps. Or holding it in place with your hand.
Sent from my SCH-I500 using Tapatalk 2
shelby04861 said:
Sounds like a poor connection issue yo me. Try a different cable and see if that helps. Or holding it in place with your hand.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
nope i tried with a new cable and it still does the disconnect sound after 5 seconds
As a last resort uninstall Kies and reinstall the latest version. It may refresh your drivers.
murat124 said:
As a last resort uninstall Kies and reinstall the latest version. It may refresh your drivers.
Click to expand...
Click to collapse
I tried, still nothing happend
You could try plugging it into AC outlet and do volume up/ power button to get it into dl mode, then plugging it into PC to Odin. Others have reported success.
Sent from my SCH-I500 using xda premium
mezster said:
You could try plugging it into AC outlet and do volume up/ power button to get it into dl mode, then plugging it into PC to Odin. Others have reported success.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Nope still no response from my phone
There's no way not checking auto reboot in ODIN would cause all this. You likely have a bigger problem caused by a bad flash, such as a bootloader corrupted to some degree.
MultipleMonomials said:
There's no way not checking auto reboot in ODIN would cause all this. You likely have a bigger problem caused by a bad flash, such as a bootloader corrupted to some degree.
Click to expand...
Click to collapse
This is quoted from this thread: http://forum.xda-developers.com/showthread.php?t=1227807&page=2
Sorry to post this late but NEVER tick reboot when flashing bootloaders.
ok now, remove battery, leave it 1-2 days with out one, then do this:
Open odin Press Vol+ and Vol- connect usb cable and put battery on.
If you have download mode reflash bootloader this time make sure reboot is not ticked, nothing ticked except pda.
If said fail retry without power off phone, if pass press power for 10 secs and you are good to go.
So i have no idea why not....
ANYWAYS problem solved I got an S3
THANK YOU!!! I have been up for 6 hours middle of the night, trying to unbrick.
Then stumbled upon this thread. The blind method worked!
Lol, now I am going to keep trying to flash. No Fear
Thank you!