I did a search and couldn't find my inquiry so i ask the great minds of XDA for help. I just got a unbranded HD2 with my AT&T SIM card. What's the recommended ROM? Also, will i be able to get 3G? My SPL is 3.03, from what i read, would i need to Downgrade that SPL or can i just get HSPL with no problems?
Big Thanks to whomever can answer this question.
well from what i know it depends oh which hd2 you have. i have a tmous hd2 and can only get edge cause the 3g bands are different, you need to find out what your 3g band is and if its the same as att's. if its the testra version you should be able to get 3g
I have a TMoUS HD2 on AT&T's network and it works perfectly though it is only Edge, (no 3G).
I'm using Cleanex Core 1.00 WWE with Radio 2.10.50.28_2 and it is fast, smooth, with great battery life with data connection and Wifi on all the time.
As others have said.. it really depends on what you bought. I recently purchased a Telstra HD2 which has 3G bands that are compatible with AT&T 850 MHz towers here in the US. And boy does it smoke on 3G
Telstra HD2 ROM change for ATT?
Radon222,
Did you flash your Telstra HD2 ROM to get rid of the proprietary glitz from the Telstra carrier programming?
Any recommendations on a vendor for the Telstra HD2?
I have the unlocked TMOUS HD2 on the ATT network.
Investigating an upgrade to the Telstra HD2 for the 3G speed.
steve
newbie
steve
I bought my Telstra used from Doug on Mobility Digest. So I couldnt really recommend a vendor. It was already flashed with an NRG ROM when i got it but have since upgraded both the HSPL and flashed the latest NRG.
So Far I really love this phone. The 3G speed is incredible as long as you aren't in Manhattan and are covered with an 850 MHz tower.
Related
I've tried to get my beloved Wallaby working now on two USA networks, T-Mobile and Cingular to no avail. I bought this new as an O2 XDA 1 in England while I was living there and miss using it so bad.
I've installed the full xda developers kit. It looks good and very functional, but I've never been able to get the phone to turn on with my new SIM from Cingular or my old one from T-Mobile.
I've tried the bandwith switcher and no dice, not on any of the frequencies. I have the model number 10A1 which is listed at only 900/1800 but Cingular runs on 900/1900 I've been told. Wouldn't it just use 900?
I'm so lost and confused. A little help anyone?
Thanks
freud
According to a friend of mine who inserted Cingular SIM to his unlocked T-mobile pocket pc phone and it worked fine.
IT works...but could use some help.
I can confirm:
Yes, Unlocked Wallaby + Cingular SIM card = GSM and GPRS connectivity. Works fine, except recpetion is retivively crap in my area (compared to Motorola RAZR, the Wallaby frankly sucks for reception.
Any thought about a RSU upgrade that might help? Phone states it is on 6.18.00
You need the 10B1 board for the USA since 1900 is used in the US
You need the 10B1 board for the USA since 1900 is used in the US
Hi, i am newbie yet, but by what i read, RADIO is responsible by the communication, with GPRS, with 3g too for exemple.
My HTC TPT7272 works on dual-band trough the HSPA/WCDMA, only on 900 and 2100 MHz...
But here on my region, my provider provides the access for 3G only on 850/1900 MHz, so, i have to use EDGE to connect to the internet, but my HTC support 3G...
Does anybody know, if I can upgrade my radio, or if is possible to change the work band for 3G by the radio for provide my access to the 3G?
Grateful
Henrique
not available
I hope that would be the case, but I have yet to see it work for the many months on this forum. There are strong evidence that this is a hardware limitation on the Raphael. Unless you have a FUZE (AT&T version of Raphael), you are out of luck for 850/1900 HSUPA until someone comes forth with the software for us to try.
but so, u see some possibility?
if anybody knows, please contact me, i would love to use my HSUPA, crap of provider, could provide full signal..
if some version of raphael works on this band, could i install his radio? i really wants to navigate on 3G signal...
LOOK IT:
Fuze/AT&T(HTC RAPHAEL 101)
Cellular;Phone
Cellular-Networks: GSM850, GSM900, GSM1800, GSM1900, UMTS850, UMTS1900, UMTS2100
Cellular+Data+Links: CSD, GPRS, EDGE, UMTS, HSDPA
FUZE WORKS ON IT, on 850, anybody know if I install his radio will work??
The official specs on HTC's website doesn't inlude 850/1900 as part of the HSPA (3G) connection, only for EDGE.
I have tried many of the radios here and none gives me 3G connection for my carrier, which is on 850 band for HSDPA.
I have tried 1.02.25.19
and then 1.02.25.28
and then 1.02.25.32
and then 1.08.25.20M1
and now 1.11.25.01
but I haven't tried any radios for the other phones since my TP is not security/CID unlock. You can try all the raphael radios, then consider getting CID unlock to try the other radios if you wish.
I have been on this forum for a few months and yet to read anyone successful in getting a TP working on 850. If you do succeed, please share this knowledge for I am sure there are still ppl out there wanting the same thing as you do as well. Myself being one of them.
I wish you success in this endeavor.
man, i am iniciant, i took my HTC TP in around 1 mounth, and one point that almost conviced me not to buy this pda was the 3g band.. i wait this more than you, lets wait if anyvody with much experience can post one help for us
one hug
Henrique
follow these threads and you will have your answer.
http://forum.xda-developers.com/showthread.php?t=420865
http://forum.xda-developers.com/showthread.php?t=451484
they haven't updated recently, which means there is no more 'news' on it.
you can try searching for 3G in the elite RC3 thread up in the sticky section.
they still don't have a solution either.
you can keep waiting.
Hello,
I recently bought a HTC HD2 and gotten unlocked to work with my ATT sim card also I had someone install the 2.2 Froyo Android software using Cyanogen Mod 6. Since I had the phone I have only been using Edge network and I know for sure we have 3g coverage. How can I get my 3G network to work on my phone? Please help. I am a newb when it comes to cell phones.
Thanks
Matt
someone correct me if i am wrong but the 3g bands for att and t-mo are different so even if you have 3g coverage you would only get edge. For faster speeds youll have to use wifi.
Do you have a Telstra-branded HD2? IIRC, Telstra uses the same 3G bands as AT&T. In that case you should be able to get 3G. Otherwise, the unbranded & T-Mo branded HD2s wouldn't work with AT&T 3G.
Sent from my T-Mobile myTouch 3G Slide using XDA App
jaekidd1012 said:
Do you have a Telstra-branded HD2? IIRC, Telstra uses the same 3G bands as AT&T. In that case you should be able to get 3G. Otherwise, the unbranded & T-Mo branded HD2s wouldn't work with AT&T 3G.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I don't know how to check that but this HD2 used by a previous ower having Tmobile. Still having the same problem. Any help is appreciated.
thanks
Thread moved in HD2 Android Development.
but this isn't hd2 android section
No 3G on the TMOus HD2 on ATT
mattp_65 said:
I don't know how to check that but this HD2 used by a previous ower having Tmobile. Still having the same problem. Any help is appreciated.
thanks
Click to expand...
Click to collapse
Unless you have the Telstra HD2 (there will be a T in an oval on the back bottom cover), you won't get 3G on ATT. The Telstra model is the only one with the ATT 3G band (the 850mhz UMTS band).
You will ALSO need to have 850mhz ATT coverage in the areas where you live and travel to get 3G on that model.
Hope this helps...
Hi!
I was wondering if there is a way to change that? Installing a new ROM, a software or something!! I bought the TMo HD2 and brought it to South America. Here we use the 850 MHz frequency for 3G, and I just found out the HD2 works with 3G networks in the 1700 and 2100 MHz frequencies =( Is there a way I can change that ???
technillion said:
Unless you have the Telstra HD2 (there will be a T in an oval on the back bottom cover), you won't get 3G on ATT. The Telstra model is the only one with the ATT 3G band (the 850mhz UMTS band).
You will ALSO need to have 850mhz ATT coverage in the areas where you live and travel to get 3G on that model.
Hope this helps...
Click to expand...
Click to collapse
I checked and there is no T on my phone or cover. But I have cyanogen Mod 6, I was wondering if anyone else has this problem.
thanks
Yes, ive searched the forums and read Wiki. Since flashing my HD2 with latest NRG rom with MaxSense (which ROCKS .. please someone take over maxcys work!) .. No 3G. Android MDJ Revolution HD also only runs on 2G. Never even heard of that! Sim is unlocked and running on ATT network. Android version is 2.2. Radio is 2.12.50.02...2. So no 3g on WMP or Android! Any ideas on what i should try??
TIA
Fy00zhen
I think you have T-mobile HD2 version, if so then your HD2 will never work with AT&T 3g bands which is (850mhz -1900mhz).
if you want 3G on your phone you need to move with T-mobile (1700mhz) which is compatible with your T-mobile branded HD2.
No software can solve this problem since it's 3g bands compatibility with ISP are related to hardware.
Hi , I have Htc hd2 t-mobile and i sent it to the company to unlock , when i tried to use vodafone sim card it worked but the 3g service didn't work anyone could help me please really it will be very useful .
Different 3g bands? What country you in?
Egypt and i bought it from USA
I do not know what bands/frequencies your carrier uses but you more than likely will not get 3G on your HD2. You see the T-Mobile HD2 is branded to T-Mobiles 3G bands/frequencies for 3G. This is done by the hardware in the phone, so no ROM or app will allow you to get 3G if your carrier does not use the same bands/frequencies. The best you will get is Edge on your HD2.
Tmous the network uses AWS meaning it uses both the 1700 and 2100 channel, one for upload one for download. Most other networks use one for up and down.