Hi,
is there any temperatur monitor for our lovely hd2 ?
thanks
ronald_delgeano said:
Hi,
is there any temperatur monitor for our lovely hd2 ?
thanks
Click to expand...
Click to collapse
CHT has a State Indicator Add-On, which includes a battery temperature indicator quicklink.
May not be exactly what you are after, but this works well and essentially tells you the devices temperature, as the battery is what makes it hot or not.
I thought the new diffrent temp/memory quicklinks in cht only linked you to a program of which you have installed on your device?
In my case they doesnt even launch when I hit any of them... but on the other hand I dont have such programs installed atm.
So then Ive got a bug , if what you say is right.
santod040 said:
CHT has a State Indicator Add-On, which includes a battery temperature indicator quicklink.
May not be exactly what you are after, but this works well and essentially tells you the devices temperature, as the battery is what makes it hot or not.
Click to expand...
Click to collapse
Thanks,
Now i can know my hd2's temp
p00ltergeist said:
I thought the new diffrent temp/memory quicklinks in cht only linked you to a program of which you have installed on your device?
In my case they doesnt even launch when I hit any of them... but on the other hand I dont have such programs installed atm.
So then Ive got a bug , if what you say is right.
Click to expand...
Click to collapse
Hmm, and you've installed the Add-On .cab for State Links???
And for other devices?
zinconnu said:
And for other devices?
Click to expand...
Click to collapse
MMhhh, it works on all WinMo devices with HTC Sense pretty much.
Manila (Sense) 2.5 on a WVGA or VGA device is required.
HVGA port also available.
Or you can check out SpoonCharge as well for a full screen battery monitor.
BattClock has temp indicator
santod040 said:
Hmm, and you've installed the Add-On .cab for State Links???
Click to expand...
Click to collapse
Yes I have , in fact I have installed everything avaliable to cht (widgets , add-ons) and so on....
Related
hi.....
anyone out here having this same problem as I am having after installing SPB Pocket Plus the screen on top gets the check boxes, is there a way to fix it ?? or any other program similiar to SPB Pocket Plus with a today plugin.
thanks
jeetz
maybe a newer version ?
otherwise you could look into claunch
http://www.freewareppc.com/utilities/claunch.shtml
Rudegar said:
maybe a newer version ?
otherwise you could look into claunch
http://www.freewareppc.com/utilities/claunch.shtml
Click to expand...
Click to collapse
Or
http://www.sbsh.net/products/ilauncher2/
few $ but with the greatest customer support I've ever seen before
arent those the task battery indicator? select the spb icon and uncheck the task battery indicator.
rollyblu said:
arent those the task battery indicator? select the spb icon and uncheck the task battery indicator.
Click to expand...
Click to collapse
you the man....... JACKPOT !! did as you said and BINGO !! its cool now
also thanks to others for posting different software links....thanks alot guys
has anybody tested any of these http://forum.xda-developers.com/showthread.php?t=311225
on his prophet?
Thanks!
have tried "HTC Home Plug" and "HTC Audio Manager", both are no problem on WM6-Prophet.
thanks!
The commmanager?
iassael said:
thanks!
The commmanager?
Click to expand...
Click to collapse
Commmanager work on WM5 and WM6
so actually everything works?
nice!
Newer HTC Audio Manager (Build 515.718 and a much larger executable)
Click to expand...
Click to collapse
OK
New HTC Home Plug
Click to expand...
Click to collapse
OK
Newer Power.exe (The Batteryindicatorbar is green instead of blue)
Click to expand...
Click to collapse
INSTALLED BUT DON'T SEE WHERE IS THE DIFFERENCE...
New Dialer Skin dumped and cabbed by "the-equinoxe" UPDATED
Click to expand...
Click to collapse
OK
Newer CommManager (new shortcut icon; looks like the one from mfrazzz; dumped from the real touch rom [maybe mfrazzzs too?])
Click to expand...
Click to collapse
OK
All test realised on my G4 CID-unlocked Prophet with PDAViet 4.0.0.0.3 ROM
i want to install the home plug in but it EATS memory :s
its 2 mb
HomePlug is slow as hell.
My phone takes like 100 secs to turn on until it is usable. Even the pin asteriks show after something like 5 sec after I press the key, windows folder shows up on something like 30 seconds. My phone become almost unusable.
after testing the home plug;
ITS GREAT
just use that cab of page 4 or 5 of that threat.
but its slow if you don't have a lot of disk memory because it uses //windows
gone try that theme now
Is it possible to use HTC Audio Manager on Prophet with WM5??
New HTC apps tested
Hi guys,
I installed and tested these new goodies. Here is my report (idea)
1) New dial pad skin: looks nice, but not much better than standard. I want to have bigger pictures, and with this skin the pictures are awfully small. So, I uninstlled again, at least I tried and it didn't work. i had to make a hard reset!
2) HTC home plug in: this app has nice features, but there is no option to change the color or to use a transparent color. You cannot have some other app as the top of your today apps, which I don't want. It slows down my S200. So, I uninstlled again.
3) HTC audio manager: not bad, but since you need again more than 1 Mb and it doesn't give me much more than mediaplayer, I uninstalled again.
4) HTC power tray. I unistalled immediately since I didn't see any advantage.
5) HTC comm manager. I kept this one, since I like the skin more than the awful colors of the standard and since 8 buttons is enough until we find a good solution for IP Phone.
Any other opinion is always welcomed!
my $0.02
1. Personally I like the new dialler. For some strange reason you cannot uninstall it when it is in use. However.
NO NEED TO HARD RESET!
...just install a different dialler, then you can uninstall this one.
2.Home plug in ...same sentiments as you...Good - looking but very slow. (like my ex. lol). Got rid of that for now.
3. Audiomanager.Keeping this one on... I like it. Not really anything special but at least a new look and none of that stupid choosing "my library" that you get in WMplayer. It is relatively big, and slow though.
4, 5. Not tried these yet. No need, really...
Working Great on My 818 Pro.
Great apps,....
I cant put HTC home plug in working :S
can someone give.me an help? :S
P4k1t0 said:
I cant put HTC home plug in working :S
can someone give.me an help? :S
Click to expand...
Click to collapse
restart your device
eddyve said:
Hi guys,
I installed and tested these new goodies. Here is my report (idea)
1) New dial pad skin: looks nice, but not much better than standard. I want to have bigger pictures, and with this skin the pictures are awfully small. So, I uninstlled again, at least I tried and it didn't work. i had to make a hard reset!
2) HTC home plug in: this app has nice features, but there is no option to change the color or to use a transparent color. You cannot have some other app as the top of your today apps, which I don't want. It slows down my S200. So, I uninstlled again.
3) HTC audio manager: not bad, but since you need again more than 1 Mb and it doesn't give me much more than mediaplayer, I uninstalled again.
4) HTC power tray. I unistalled immediately since I didn't see any advantage.
5) HTC comm manager. I kept this one, since I like the skin more than the awful colors of the standard and since 8 buttons is enough until we find a good solution for IP Phone.
Any other opinion is always welcomed!
Click to expand...
Click to collapse
I agree,
Only useful seems to be nice 8 buttons Comm Mgr.
binky11 said:
restart your device
Click to expand...
Click to collapse
i have do it!! ^^
it works on wm5??
I read though the thread you linked to .. And i saw that someone was able to flash a HTC Touch rom to a Wizard! He said that i had some few bugs like the keyboard and small joypad not working Then i thought.. wouldn't it be more likely that it would fit on the Prophet ? I mean, toch and prophet looks more like each other than wizard and touch does..
BIOTOUCH working kinda
I've instaled the Biotouch from here
http://www.4winmobile.com/forums/hermes-black-rom-support/9828-att-developers-porting-touchflo-elf-hermes-2.html
and the dailer and Default Theme from here
http://forum.xda-developers.com/showthread.php?t=311225
only thin that I cant get to load is the quickdail
it is kind of slow at the moment, but I'll include it in the extrom for PADViet which will make it a bit faster.
the only real downside of these new apps is the slow bootup of the phone but I don't see that as a big prob..... I'm not gona restar the phone that often
gullum said:
I've instaled the Biotouch from here
http://www.4winmobile.com/forums/hermes-black-rom-support/9828-att-developers-porting-touchflo-elf-hermes-2.html
Click to expand...
Click to collapse
What are the benefits of Biotouch?
Hi there,
I flashed succefully my Athena X7500 to WM6.
Now I'm searching for screen resolution. Where can I change it? Isn't it possible to change to 640x480 with installing any separated application?
Best Regards,
netzzwerg
I dont think WM6 has true VGA.
All I can find is an extra menu option on PocketIE to use hires mode, nothing else though
try mvr true vga 1.3 works a treat....
^Can you attach the setup file for TrueVga 1.3
Thanks in advance.
Nara-e-Mastana said:
^Can you attach the setup file for TrueVga 1.3
Thanks in advance.
Click to expand...
Click to collapse
Can you type in MVRTrueVga in Google search....sorry
but if you just type MVRTrueVga in google search the site and download appear in the first listing
or click the link below
http://www.google.com/search?q=mvrt...t:*&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1
or this link
http://www.jaml.com/MvRTrueVGA/
eagle 1 said:
Can you type in MVRTrueVga in Google search....sorry
Click to expand...
Click to collapse
Harsh ..... but fair. OK claws away now!
apd said:
Harsh ..... but fair. OK claws away now!
Click to expand...
Click to collapse
Sorry, I guess bad moment
here are some screen shots with MvrTrueVga... While it adds some more screen space, with my eyes its a little too small for most apps. You can modify the font size, but then its too big when you switch back to qvga...It has some uses, but now with IE's high res and font size adjustment, I don't use it much. I used to use it a lot with my universal though.
Hi eagle1,
Try using MVR 1.2..I found it better than 1.3.Were u able to get Windowslive working..?
I installed MVRTrueVga 1.3 and Windows Live is not working properly with it.
Also It has problem showing windows live today's plugin...
Version 1.2 used to run Windows Live correctly including the today's plugin.
Also note that some satnavs (based on Igo My Way) don't work in true VGA mode - you have to switch first
hdubli said:
Hi eagle1,
Try using MVR 1.2..I found it better than 1.3.Were u able to get Windowslive working..?
Click to expand...
Click to collapse
Has anyone else tried 1.2?
On WM5 Ameo I used to have 1.3 on, but whenever I switched back the WLM Today plugin would be horrendously slow.
Now that I'm on WM6, I think I'll stick with QVGA. Pocketbreeze is still nice and small but I sometimes had trouble whilst not sat down that when I tried to click the volume icon i'd miss and hit the signal indicator, or vice verca on VGA.
I installed the windows live 5.0 cab file (i used on my universal) over the top of the install in wm6.
It works now
I have installed 1.3 on WM6 , and the problem I get is that the Phone Dialler is about a cm north where it should be , meaning you can't see the numbers you dial
I am a bit slow , am I missing something here ? or has anyone else had this problem ?
Please, show schreenshot of backlight setting screen in VGA mode.
vzuravlo said:
Please, show schreenshot of backlight setting screen in VGA mode.
Click to expand...
Click to collapse
^^^ This is another problem I have ! I can't post a screenshot as I have uninstalled it for now , but I had two stumpy , short sliders with circles at each end , they didn't work though !
vzuravlo said:
Please, show schreenshot of backlight setting screen in VGA mode.
Click to expand...
Click to collapse
you cant adjust the sliders. try using pocketplus as that has a slider icon on the today screen to adjust brightness so can easy adjust. without this or similar vga is useless but an easy fix. sure other programs have this feature too but i use pocketplus and very useful if your outdoors to turn right up.
Hello,
When I used to check the battery status on my previous pda, complementary to the green bar there was always the value in percentage. But with Touch Pro, I only get to see the green bar without the remaining percentage value. Does anyone know if it's possible to display that info??
I just notice that I made a mistake and posted this thread on the Raphael Rom development instead of puting in the main Raphael rom. If someone could move this thread it would be great.
try to use green battery or any other additional software
Regards
B.
Use a program called batti, puts a tiny bar at the top of your screen displaying power level and when you tap it, it give precise details on battery levels
I use this one... looks pretty neat:
http://forum.xda-developers.com/showthread.php?t=364768
Just consider 1 green notch as 10%
Consider this too:
FInixNOver VGA Battery/Network Icons
Thanks for the post, that worked well.
-mix
roomer11 said:
Consider this too:
FInixNOver VGA Battery/Network Icons
Click to expand...
Click to collapse
Hmm, I installed the FInixNOverBatteryIconsOnly.cab and now instead of the battery icon I have permanently the "connected to the power" icon. Even when I disconnect it from the power the icon remains the same.
On top of that, supposedly this cab would only change the battery icon, but instead also change the Gprs icon...
onesolo said:
Hmm, I installed the FInixNOverBatteryIconsOnly.cab and now instead of the battery icon I have permanently the "connected to the power" icon. Even when I disconnect it from the power the icon remains the same.
On top of that, supposedly this cab would only change the battery icon, but instead also change the Gprs icon...
Click to expand...
Click to collapse
Did you install version 4?
That should only change your battery icon.
Battery % level can be seen without installing 3rd party apps
programs > system info
ardsar said:
programs > system info
Click to expand...
Click to collapse
hmm ?? are you sure? don't have that and never seen on other pdas with winmo
johanromijn said:
Did you install version 4?
That should only change your battery icon.
Click to expand...
Click to collapse
Lol, of course it's version 4, can't you see the name of the file that I installed ?
onesolo said:
hmm ?? are you sure? don't have that and never seen on other pdas with winmo
Lol, of course it's version 4, can't you see the name of the file that I installed ?
Click to expand...
Click to collapse
Try this one
Supposedly only changes the battery icon and nothing to do with network connection icons
http://forum.xda-developers.com/attachment.php?attachmentid=112185&d=1221074437
Lolo, but that was exactly the cab file that I installed on my touch pro!!!
onesolo said:
Lol, of course it's version 4, can't you see the name of the file that I installed ?
Click to expand...
Click to collapse
You're right, sorry my bad, didn't properly read that.
Maybe you can contact the author, and tell him about it.
[EDIT] I took a look at the file, but the network icons seem to be the original.
roomer11 said:
Consider this too:
FInixNOver VGA Battery/Network Icons
Click to expand...
Click to collapse
This one works great for me as well.
onesolo said:
hmm ?? are you sure? don't have that and never seen on other pdas with winmo
Click to expand...
Click to collapse
Appologies, its part of Resco Explorer. Didn't realise that is was not part of WM6.1 as i've always had Resco installed.
Yup I tried that same FInixNOver Battery Icon only cab and instead of changing by battery icon it only changed my gprs and edge icons... something I didn't want....
i ended up loving ariel battery indicator,
http://forum.xda-developers.com/showthread.php?t=364278
badaas said:
i ended up loving ariel battery indicator,
http://forum.xda-developers.com/showthread.php?t=364278
Click to expand...
Click to collapse
Thanks for sharing. Installed it too, and placed it over the original one. Looks good!!
[App][12/Dec/10][v1.3] SpoonCharge - Fullscreen Battery Monitor & Torch [+Sourcecode]
SpoonCharge - Fullscreen Battery Monitor
Introduction
This is an application which displays the current battery information in large text. It also doubles as a fullscreen torch application.
I wrote it so I could see from a distance what the charge level was, and how fast the battery was charging.
The colour of the text also changes depending on levels, and temperature.
This has only been tested on a Diamond2, but works with many other devices. Not all features work on certain ROMs or Phones, and it generally helps to have a rom with 1% power driver installed. Some people have seen the app working fine without this.
It's based on Joel Johnson's article at CodeProject, but translated/refactored from Visual Basic to C#.
Version History
v1.0 24/4/10
Initial release
v1.01 26/4/10
Detect AC adapter status, not use negative battery current
v1.2 02/5/10
Add Fullscreen mode (menu and statusbar hidden)
Add Nightmode (screen turns black, higher contrast in low light situations)
Add Torch functionality from SpoonTorch (white fullscreen, maximum brightness)
Detect charge status and current more accurately
Change charge speed messages (<100ma=Trickle,<200ma=Slow,<450ma=Medium,<600=Fast,>599=Very Fast)
Ability to change refresh interval
v1.3 16/5/10
Add time to screen
v1.3 Source 12/12/10
Source code released
Requirements
* Needs .NET Compact Framework 2.0+.
* Should work on all Windows Mobile 5 and above devices.
* Non-touchscreen compatible (Windows Mobile Standard).
Donations
Donations are gladly accepted. Thanks!
Im the first!! nice app! but i found this... Charging with USB and says on battery... this is because it is still discharging?
thanks
OK, confirmed... When the charging ratio is below 0 says on battery... no prob.
Usefull app.....nice work
I confirm that it work on Kaiser QVGA.
Thanks.
Hey Man good app
Check this out
http://pocketnow.com/software-1/simple-charge-battery-monitoring-app
Thankx
What is the reason why I can't download this file it says download fail.
it says the request header could not be located.
Thanks for this great app
Works an Diamond 1 VGA
Very nice! Thanks.
working on Vox as well
Doestn't work on my TouchPro 2 german rom...
I'm sure you need a hacked 1% battery driver installed, for this app to work correctly. So either do that on your stock ROM.... or flash a custom rom
Thanks for the feedback, guys.
nelsonw said:
Im the first!! nice app! but i found this... Charging with USB and says on battery... this is because it is still discharging?
thanks
OK, confirmed... When the charging ratio is below 0 says on battery... no prob.
Click to expand...
Click to collapse
Yes, it doesn't detect AC adapters at the moment - just assumes that if the battery is losing current it isn't connected to AC/USB. I will change this at some point.
TP2-User said:
Doestn't work on my TouchPro 2 german rom...
Click to expand...
Click to collapse
What does it say? Have you a screen shot?
NRGZ28 said:
I'm sure you need a hacked 1% battery driver installed, for this app to work correctly. So either do that on your stock ROM.... or flash a custom rom
Click to expand...
Click to collapse
Interesting, can you post a link to this driver? Thanks
DotNetCoder said:
Interesting, can you post a link to this driver? Thanks
Click to expand...
Click to collapse
Here you go
It works (kind of) on the HTC Vox (WM Standard). It always says it's on AC...
DotNetCoder said:
Thanks for the feedback, guys.
Interesting, can you post a link to this driver? Thanks
Click to expand...
Click to collapse
They are specific to each device... There's usually a thread with one in each device's ROM development or general forums
malhznoi said:
Hey Man good app
Check this out
http://pocketnow.com/software-1/simple-charge-battery-monitoring-app
Thankx
Click to expand...
Click to collapse
clicking the Source at the bottom of the article , comes back here... what was your point...
great app ..going to give it a try.....
working on my hd2
nice application
Works fine in my TP2. I have 1% battery driver installed. Will test this without 1% driver sometime... Thanks for the app.!
Doesn't work on my Omnia i900 with a custom rom. I only see the percentage getting higher. v, ma and C are =0, and status is always Idle.
Doesn't work on my Samsung Epix SGH-i907 running WM 6.1 Pro. I only see the percentage of charge. The other counts are all 0, and status is always Idle. Thanks.
Is this skinable?