Hi guys,
my bootloader screen appears to be corrupted.it doesnt show the PB81110 but instead shows a weird symbol and HX-BC
SPL-1.42.HSPL XE
cotullaHSPL
Image is attached below.
I did hard spl using HSPL 2 tool by cotulla,but i dont have the regular first line of the boot loader.
The problem is I cant get into my phone i cant install any rom or radio or do any kind of flashing and anything I try,the process stops or exits in the halfway,showing invalid device error or connection error.
I tried flashing through my SD card too but it too doesnt bring my phone back.
The error I get now on switching on the power button is
flash type 5510BCAD
power reason 1
BOOTUP_W_PWR_KEY_PRESSED.
I tried mulit-port tty and tried task 29 to unclutter the ROM too but it showed way too many errors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is my phone dead?
The HTC guys asks for 1/3 the phone price for changing the mainboard.
Is it possible to bring my phone back?
please help.....
guys anyone ... please help.....
guys anyone ... please..... help....
1- when you originally installed hspl, did you get the confirmation "we did it" or whatever?
2- did you ever have the "right" hspl first line? not sure what hspl2 looks like, but you are right, it is different than hspl3.
3- when you flashed from sdcard, it most likely removed hspl. can you get to bootloader? if you can, you will be able to save the phone. if you can, what does it say?
4- what phone (us or not?) do you have? what rom were you using? what were you flashing?
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
jsmccabe78 said:
1- when you originally installed hspl, did you get the confirmation "we did it" or whatever?
Yea.I got the confirmation that 'we hacked it' on my mobile.
2- did you ever have the "right" hspl first line? not sure what hspl2 looks like, but you are right, it is different than hspl3.
No, i never had the first line right.
But when i switch on off for many no of times and getinto the bootloader screen i get the first line correct,maybe 200 in one time but at those times when i eagerly try to connect to the PC i dont have the word 'serial" or 'USB" mentioned on the bottom white column of my bootloader of my mobile,and still if i ignore and try to connect to the PC the pc doesnt recognize my phone during that time.
3- when you flashed from sdcard, it most likely removed hspl. can you get to bootloader? if you can, you will be able to save the phone. if you can, what does it say?
'when you flashed from sdcard, it most likely removed hspl' -----Tht's what i 've read in forums too.But the image(sorry I dont have a good camera,i know the image i posted isnt clear) i posted is what the bootloader screen i get with
a weird symbol and HX-BC
SPL-1.42.HSPL XE
cotullaHSPL
4- what phone (us or not?) do you have? what rom were you using? what were you flashing?
Click to expand...
Click to collapse
I bought the phone in singapore,model no 'T8585';so it not a 1024 US.I am not particularly sure what ROM i was using all these days(i mean before the flashing).
I m a bit new to this flashing so initially i flashed it with 'RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe' from htc singapore website and that is what led to the all the trouble...
I tried to unclutter it with Task29 provided by doloop and it didnt work out... but somehow after that i tried to flash with 'Duttys_2.5_5.23146.5.3.10_3.14_HD2_ML_Family_ROM_(V7)_ASIA-WWE' but nothing worked.
But after trying so many times.... i found that sometimes all the above stuff did complete the flashing and sometimes it didnt complete.
But whatever i did, whether the process of flashing completed or not i could not get the phone working.
The image i posted in the first post is what i get as bootloader screen.(on pressing the pwr+volUp)
When i press the power button i get a grey screen with text as
'flash type 5510BCAD
power reason 1
BOOTUP_W_PWR_KEY_PRESSED'
i further read the forums and I tried using a SD card to flash but it failed too at the radio install menu.
my MP-tty results are in the attachment of my first post.
I did run it like 4-5 times.Only once i got the results as expected. USB3.txt attachment.
I think the bootloader is corrupted.. but i dont know how to fix it.
Somewhere i read that JTAG tool(it costs 60% of the phone price) may help in writing a bootloader .. but it requires to open the phone and too much complication involved in it,which i dont want to deal.
IS there a 'soft' way to rescue my phone?
Srry to tell you this but you bricked your phone as I see it you installed an incompatible rom to you phone. But if you have hspl installed than all you do is go to bootloader mode connect phone to computer then install a stock rom.
Samsunguy said:
Srry to tell you this but you bricked your phone as I see it you installed an incompatible rom to you phone. But if you have hspl installed than all you do is go to bootloader mode connect phone to computer then install a stock rom.
Click to expand...
Click to collapse
i have hspl installed and i tried to install a stock rom by PC and also by SD card .
its not working.
I think the bootloader is corrupt!
Samsunguy said:
Srry to tell you this but you bricked your phone as I see it you installed an incompatible rom to you phone. But if you have hspl installed than all you do is go to bootloader mode connect phone to computer then install a stock rom.
Click to expand...
Click to collapse
Well, i too installed an incompatible ROM (I was NLD version, installed WWE) with HSPL, but the beauty of it is that HSPL allow to do this.
an incompatible rom wouldve been flashing a 1024 HD2 with 512, and he didnt do that.. Also, he used official HTC roms on the website, and ASIA it seems is the correct version for him to use (he had to input serial on HTC to dowload it)
Now, possibly his asian rom isnt compatible with HSPL..
I would be good to know what rom you started with before upgrading to 3.14
Did u install the 3.14 on top of your HSPL? (i know i did that too and had memory problems)
Im no expert (actually i was helped a lot from users here for flashing my week old HD2 into english) but i certainly know that limited access to bootloader is a *****. Try the flash from SD card (a 2go card is better i believe) with a STOCK ROM (download a year old one from HTC, not the 3.14 one).
Did u also try SSPL, instead of HSPL? i know that i didnt manage tro change my language with HSPL (my phone was blocked on 1 language) but worked fine on SSPL..
ANyways, sorry, i know how u must feel..
If all fails, go to the shop and take that 1/3 offer.. but get a guarantee from the guy that if he cant repair it, you dont pay anything
Ps: couldnt believe when u said this :
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
India.. english.. lol! I mean, your english sounds fine. If you had said, sorry i dont speak english in my country which is Nepal, or a small village in china.. but india?
Anyways, keep the forum updated on ur situation
zewill said:
Well, i too installed an incompatible ROM (I was NLD version, installed WWE) with HSPL, but the beauty of it is that HSPL allow to do this.
an incompatible rom wouldve been flashing a 1024 HD2 with 512, and he didnt do that.. Also, he used official HTC roms on the website, and
ASIA it seems is the correct version for him to use (he had to input serial on HTC to dowload it)
Now, possibly his asian rom isnt compatible with HSPL..
I would be good to know what rom you started with before upgrading to 3.14
Did u install the 3.14 on top of your HSPL? (i know i did that too and had memory problems)
Im no expert (actually i was helped a lot from users here for flashing my week old HD2 into english) but i certainly know that limited access to bootloader is a *****. Try the flash from SD card (a 2go card is better i believe) with a STOCK ROM (download a year old one from HTC, not the 3.14 one).
Did u also try SSPL, instead of HSPL? i know that i didnt manage tro change my language with HSPL (my phone was blocked on 1 language) but worked fine on SSPL..
ANyways, sorry, i know how u must feel..
If all fails, go to the shop and take that 1/3 offer.. but get a guarantee from the guy that if he cant repair it, you dont pay anything
Ps: couldnt believe when u said this :
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
India.. english.. lol! I mean, your english sounds fine. If you had said, sorry i dont speak english in my country which is Nepal, or a small village in china.. but india?
Anyways, keep the forum updated on ur situation
Click to expand...
Click to collapse
REply:
I think i had 1.66 ROM version,if my memory serves me right!
I installed 3.14 on top of my HSPL.
I didnt try SSPL.
I tried HSPL2 but it gave 'critical errors...blah...blah'
I thought of JTag repair at my place in chennai,india... but i dont want to experiment anymore with HD2.The phone had died.
Should have bought an Android phone... its lot easier to handle...
The glitches are less too.even if they have glitches there are more solutions.
Similar bootloader errors at my HTC center are managed by changing the mainboard.
When i am done,I guess its a new phone except for the screen and battery.... and couple of buttons.
other language forums:
Few vietnam and chinese guys have had similar problems like i did but they dont have solutions ....
So guys... if u have bootloader text errors .... its almost the end of the phone,unless someone in future finds a solution.(which is unlikely cos the WM 6 series platform is dead ).
Hey dude.... I was desperate in search of a solution.I 've never conversed with an English speaking(native) person before .I was overwhelmed with the reply by jsmccabe78 who is a senior member and i didnt want to sound rude or cheesy!
Anyways thank you so much guys for your replies!
hadrons123 said:
Thank you so much for the reply.....
I dont speak english in my country(india) so pardon my english!
I bought the phone in singapore,model no 'T8585';so it not a 1024 US.I am not particularly sure what ROM i was using all these days(i mean before the flashing).
Click to expand...
Click to collapse
Dude you mentioned you bought T8585. It's a clone dual sim HTC. Please correct me if im wrong.
But you might try eten-users forum and search for MTK HD9.
look for the procedure on how you can install the correct compatible ROM for your phone.
You have to order a special cable for you to flash the correct compatible ROM.
Remember, its a clone HTC phone and not an original one.
Problem solved. Thanks!
dennis.vallente said:
Problem solved. Thanks!
Click to expand...
Click to collapse
To help others, can you share how you solved the problem?
dennis.vallente said:
Problem solved. Thanks!
Click to expand...
Click to collapse
are bol de yaar.
plz rwply it man.
Related
These are the instructions I spent many hours looking for. Also, I know most people know, but just in case... Loading a ROM does wipe your device. Make sure you have all your info synced or backed up someplace.
- Doc
First, I Followed andykwg's instructions to the letter:
(here is his Post,but in case you dont want to go there, here are the instructions)
ANDYKWG:
Thanks POF, my 8525 is unlocked, but I have gone through hell with Vista so just to let you all know that "don't try these upgrades on VISTA".
I have read many posts and finally got it to unlock. In any case, here is what I did (on a XP box with activeSYNC 4.2 - it is running all the time for each of the steps below):
1) on XP, connect the phone to XP and make sure ActiveSync see the phone. Run the exe in 1.30 ROM for Cingular to download the SPL to 1.04. After this the phone will reboot/restart itself.
2a) On XP, with ActiveSync running and connected, run POF's MaUpgradeUt_noID.exe within the unlocker v2a xip file to upgrade the radio to version 1.16. If it fails with ERROR 114, go to step (3); else go to step (2b).
2b) If the first time failed, DON'T TOUCH THE PHONE. Run the exe again and the second time should run fine. There is a 114 error at the end and it is OK. Once you get the 114 error, soft-reset the phone before next step.
3) On the phone, flash with POF's unlocker (v2a) ON THE PHONE MEMORY HERM_Unlock_v2a.exe (in the zip file same as above download for unlock v2a). There is a success notice at the end.
That is it. Hope this help someone.
Andy
DocHoliday:
Now, what Andy Doesn't say here, and people have asked, is Yes, you are now unlocked and SuperCID.
Ok, I went a step further.
I loaded the South African 1.35 ROM. Why? Faster and about 15% more battery life to boot! There are a few things to consider before you go to SA 1.35. Your boot loader will now be SPL-1.09. Make sure your device is unlocked before you go to this ROM! If it is unlocked and SuperCID, it will remain unlocked and SuperCID after the ROM Update. If you installed the update before unlocking, I think you are out of luck. I have seen some threads that say you can change back to SPL-1.04, but nothing conclusive.
3 things you will notice after you load this ROM and how to fix them:
1. Keyboard Special Characters are out of Sync with the Keyboard (-, _, ;, :, etc...)
Most people said a registry entry fixed theirs, it did not for me. Here is what worked. Download this Extended ROM. Copy ShortString_Keypad_XML.CAB to your SD, then run it. Softboot, then Keyboard Special Characters are fixed!
2. Keyboard BackLight:
Disable the light sensor! With the SA ROM, the light sensor is too sensitive and doesnt work properly.To disable: Settings (on the 8525), Buttons, Backlight tab - Clear The Checkmark! Keyboard backlight now works when you press any key.
3. May not be a problem for some, but Phone skin is God Awful Lime Green! Yuck! (my opinion...)
Fix Phone Skin an download the skin of your choice...
Anyway, Hope this Helps someone. Took me a while to research and I wish I had my post when I first started. Many thanks to POF and the other contributors to XDA without which we would be limited to the ROM's the Carriers stuck us with! Good Luck all!
great
Thanks!!!! I want the perfect 8525 rom/radio/ext rom. Trying to decide what radio to include.
sucess with cingular 8525 1.34.502.1
thanks d0ch0liday..i loaded a t-mobile sim and started working right away.
Glad you guys got some use out of it.
It may be buried somewhere in the instructions, but definitely make sure you have a solid USB connection to your computer. Definitely DO NOT try an upgrade going through a USB hub!
Also make sure your battery is well charged... ;-)
Excellent advice, thanks...
some folks at ebay are selling Unlocked 8525s (like in this link), i am curious that if I buy one of these, will it be definitely SuperCID?
Hi there...long time no using a WM device and all the things with this CID and locked devices become a bit complicated to me...So I bought a M3100 unlocked with pof V2 and I have successfully upgraded my Radio version to 1.27.00...but now I want to upgrade the ROM too...I assume that my device is CID unlocked as I was able to upgrade the radio only...but a strange thing...I have no extended ROM on it...so can I upgrade my current rom with the SA 1.35 rom without problems...?
Regards and sorry for the noob question
Primoz
X_Farhad said:
some folks at ebay are selling Unlocked 8525s (like in this link), i am curious that if I buy one of these, will it be definitely SuperCID?
Click to expand...
Click to collapse
Probably not SuperCID. These look like they may have been obtained directly from HTC or they may be test units. They say new, but you new means never opened. It doesnt tell you how long they have been on the shelf. Since they are HTC, even if they were test units you would probably be ok. Anyway, you would probably still have to do POF's unlock to get it to SuperCID. Hope this helps...
Pc78 said:
Hi there...long time no using a WM device and all the things with this CID and locked devices become a bit complicated to me...So I bought a M3100 unlocked with pof V2 and I have successfully upgraded my Radio version to 1.27.00...but now I want to upgrade the ROM too...I assume that my device is CID unlocked as I was able to upgrade the radio only...but a strange thing...I have no extended ROM on it...so can I upgrade my current rom with the SA 1.35 rom without problems...?
Regards and sorry for the noob question
Primoz
Click to expand...
Click to collapse
You should be able to load any ROM you wish once you load POF's unlock. SuperCID and SIM Unlock stay with it...
d0ch0liday said:
Probably not SuperCID. These look like they may have been obtained directly from HTC or they may be test units. They say new, but you new means never opened. It doesnt tell you how long they have been on the shelf. Since they are HTC, even if they were test units you would probably be ok. Anyway, you would probably still have to do POF's unlock to get it to SuperCID. Hope this helps...
Click to expand...
Click to collapse
thanks for the reply d0ch0liday!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i really don't think they are test units..any way, do you think it's a good idea to buy one of these? they're like 200 bucks cheaper than tytn... btw, can I update them later on through Cingular's website? and is it possible for my device to become Locked on some carrier again if i flash it with the wrong Rom?
X_Farhad said:
can I update them later on through Cingular's website?
Click to expand...
Click to collapse
Yes if they are SuperCID or have a cingular CID (CWS__001).
X_Farhad said:
is it possible for my device to become Locked on some carrier again if i flash it with the wrong Rom?
Click to expand...
Click to collapse
Definitely not SIM locked. If it is not SuperCID and you plan to switch ROMs from different carriers, then make sure you CID unlock it prior to do any upgrade.
thank you pof!
just one more thing, have they ever shipped 8525 with bootloader 1.09? if they do, is it possible in any way to flash a rom from another carrier after CID Unlocking it?
X_Farhad said:
have they ever shipped 8525 with bootloader 1.09?
Click to expand...
Click to collapse
Not yet AFAIK.
X_Farhad said:
if they do, is it possible in any way to flash a rom from another carrier after CID Unlocking it?
Click to expand...
Click to collapse
yes.
d0ch0liday said:
2. Keyboard BackLight:
Disable the light sensor! With the SA ROM, the light sensor is too sensitive and doesnt work properly.To disable: Settings (on the 8525), Buttons, Backlight tab - Clear The Checkmark! Keyboard backlight now works when you press any key.
Click to expand...
Click to collapse
First this is an excellent Primer for those of us with Cingular phones ( or people like me who have one on order and want to be ready to tinker )
Has anyone found a reason that the SA ROM causes the light sensor issue?
Also is there a way to bring the phone back to virgin/stock if the need were to arrise (as in the phone died)?
quick question from 8525 users: what is the input voltage range for 8525's travel charger? is it 110-220 or just 110?
rgreenpc said:
First this is an excellent Primer for those of us with Cingular phones ( or people like me who have one on order and want to be ready to tinker )
Has anyone found a reason that the SA ROM causes the light sensor issue?
Also is there a way to bring the phone back to virgin/stock if the need were to arrise (as in the phone died)?
Click to expand...
Click to collapse
Not sure why the light sensor happens. I also noticed it happened with the 1.30 ROM as well. This is the ROM you load to downgrade to the 1.04 bootloader. I didnt really like the sensor anyway as it definately did not do well in ambient light. As far as getting it back to Cingular stock, just load the latest Cingular ROM 1.34 and it should be close enough. Thanks for the compliment. I wrote this just for that purpose. I spent quite a while looking for all the answers, I learned alot, which is i think POF's and the others intent. But it was very consuming and wanted to save others the uncertainty of not following in someone's footsteps. Again, thanks.
X_Farhad said:
quick question from 8525 users: what is the input voltage range for 8525's travel charger? is it 110-220 or just 110?
Click to expand...
Click to collapse
Mine says 100-240 volts and has a travel adapter for Europe.
d0ch0liday said:
Mine says 100-240 volts and has a travel adapter for Europe.
Click to expand...
Click to collapse
Also it is a standard mini-usb connector so any PC will do (or powered usb Hub)
d0ch0liday said:
Mine says 100-240 volts and has a travel adapter for Europe.
Click to expand...
Click to collapse
thanks
this is my first post and as you'll learn quickly i'm a total newbie. I'm such a newbie that you'll find a picture of me on the dictionary entry of noob. anyway, on to my problem.
About a month ago i purchased a HTC Hermes, more specifically AT&T 8525. My cell phone provider is T-Mobile. I googled AT&T 8525 unlocker and sure thing found this great unlocker. Free HTC Hermes SIM & CID Unlocker *New* version v3a. Needless to say the unlocking worked perfectly. My phone ran Windows Mobile 6.0 Pro.
Fast forward about three and a half weeks ago and my friend got the same phone off ebay. He has T-Mobile too and I told him i would unlock it for him since mine worked flawlessly. Well, his phone runs on Windows Mobile 5.0 Pro. I started the update process on the computer and here's what the screens looked like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My phone did not ask me to press yes. Then i checked the boxes on the setup and was ready to continue
After pressing next it showed this
The progress bar remained at zero then this screen came up
http://i78.photobucket.com/albums/j120/mnn2k/phone/Untitled8.jpg
I have tried over and over again and get the same error. I have tried using different USB ports, USB cables, and two computers, both running vista but i have had no luck. now the phone is be in the tri-color mode and it won't do anything. All the screen says is
HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
If i can't fix it i guess i will have to give my friend my phone and will lose a lot of money. Any help is appreciated. I tried doing a search and all the posts can't help me since i don't know much at all when it comes to phones.
Flash it with a stock rom from the wiki (for the country and provider the hermes is from)
and do it from an xp computer
Johnston411 said:
Flash it with a stock rom from the wiki (for the country and provider the hermes is from)
and do it from an xp computer
Click to expand...
Click to collapse
its a United States AT&T 8525. i tried flashing it with the Official HTC WM6 ROM from this link http://forum.xda-developers.com/showthread.php?t=316726 but now the progress bar goes to 11 then it gives me the same error. I'll have to try it on from a XP. on the Readme it says there might me a problem with ports. How do i check if there is a problem with that.
If i were you i would flash hard-spl v7 before you flash another rom.
http://forum.xda-developers.com/showthread.php?t=296722
If you are on vista make sure you download the latest version of wmdc from microsoft.
Then flash the most recent at&t rom from here
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
If this still doesn't work use an xp machine. If you can't use an xp machine there is a guide that explains how to swap the wmdc drivers for active sync ones.
http://www.anichillus.net/index.php?topic=21.0
why does everyone seem to point the main cause of problems to vista?
I have vista installed and i dont have any problem flashing with WMDC (latest version installed) and have updated vista with sp1 , i did used to have problems sync'ing the phone before i installed sp1 but afterwards i have had no problems and flashed a number of phones for people who had experienced the same thing as MNNK.
Anyway enough of my moaning. Basically i would flash an original rom. then try flashing hardspl . If the HTC one wont work try the network rom,that it was originally on, T-Mobile.
http://member.htc.com/downloadfiles/RomCode/TMobile/Hermes_WM6_TMUK_3.60.110.4.zip
THATS THE ONLY LINK I HAVE FOR T-MOBILE yeah i know its the uk one but might be handy for someone from the uk browsing this page because of the same problem
Or that at&t rom that johnston411 said
Johnston411 said:
If i were you i would flash hard-spl v7 before you flash another rom.
http://forum.xda-developers.com/showthread.php?t=296722
If you are on vista make sure you download the latest version of wmdc from microsoft.
Then flash the most recent at&t rom from here
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
If this still doesn't work use an xp machine. If you can't use an xp machine there is a guide that explains how to swap the wmdc drivers for active sync ones.
http://www.anichillus.net/index.php?topic=21.0
Click to expand...
Click to collapse
thanks for the help, i played around and finally found a ROM that installed, Schaps 4.31 WWE.
scousemartin said:
why does everyone seem to point the main cause of problems to vista?
I have vista installed and i dont have any problem flashing with WMDC (latest version installed) and have updated vista with sp1 , i did used to have problems sync'ing the phone before i installed sp1 but afterwards i have had no problems and flashed a number of phones for people who had experienced the same thing as MNNK.
Anyway enough of my moaning. Basically i would flash an original rom. then try flashing hardspl . If the HTC one wont work try the network rom,that it was originally on, T-Mobile.
http://member.htc.com/downloadfiles/...3.60.110.4.zip
THATS THE ONLY LINK I HAVE FOR T-MOBILE yeah i know its the uk one but might be handy for someone from the uk browsing this page because of the same problem
Or that at&t rom that johnston411 said
Click to expand...
Click to collapse
i found Schaps ROM and that worked. thanks for all the help. In your opinion which is the best cooked ROM.
Now you opened a can of worms.... Everyone thinks something else is best, & it is for them..... A rom is a personal choice so asking whats best is like your girlfriend asking if you think shes fat, THERE IS NO RIGHT ANSWER.....
Seriously though, do some research on the Hermes Mobile 6 part of the forum as I believe someones started an updated list of current roms.
Cheers.....
ultramag69 said:
Now you opened a can of worms.... Everyone thinks something else is best, & it is for them..... A rom is a personal choice so asking whats best is like your girlfriend asking if you think shes fat, THERE IS NO RIGHT ANSWER.....
Seriously though, do some research on the Hermes Mobile 6 part of the forum as I believe someones started an updated list of current roms.
Cheers.....
Click to expand...
Click to collapse
Okay, i'll stay away from that. but i still can't flash HardSPL on my phone. it gives me error 260.
1) i uncheck the allow USB connections on WMDC
2). i run the SPL-HERMES.exe on my phone and connect to usb.
3). run ruu_wrapper.exe
I also read the guide here http://www.mrvanx.org/hermes_guide/hardspl and nothing.
Then i tried using the Unlocker but that gives me the same error 260. i have tried the SD card method but mine is a 4gb microSDHC. my phone recognizes the card and i renamed the .nbh file. So i launch spl-herm.exe and nothing happens. i do hit the power button. still nothing.
When running SSPL-HERM.exe it says i have SPL-1.09.ds. when i do a manual bootload it says i have SPL-1.40.Olipro
what did you rename the image as when you placed it onto the sd card?
I know a lot of people have renamed the file incorrectly?
Also, I know people who SWEAR they formated fat32 but when I did it again using the same card freshly formatted it worked.
Cheers...
scousemartin said:
what did you rename the image as when you placed it onto the sd card?
I know a lot of people have renamed the file incorrectly?
Click to expand...
Click to collapse
renamed from HermesUnlocker_v3a.nbh to HERMIMG.nbh
ultramag said:
Also, I know people who SWEAR they formated fat32 but when I did it again using the same card freshly formatted it worked.
Cheers...
Click to expand...
Click to collapse
i did format it with fat32, quick format and normal format, default allocation size and 4096 bytes. i know i said i am a newbie when it comes to phones but i'm not one when it comes to computers. i would rather have Hard-SPL flashing first though, and also i have no Radio ROM currently on the phone.
The fact you have no radio is probably your BIGGEST problem.The no GSM error is what makes most bricks. Up til now there is no reliable surefire fix.
Looks like you have a PDA on your hands but no phone functionality. You can load an os only rom - generally they are the cooked roms, but you have more chance of jumping off a cliff and instantly growing usable wings than fixing this in a hurry...
Sorry to be the bearer of bad news. but thats why the unlocker won't flash on, it replaces the radio rom to something that allows the sim/cid to be unlocked.
You should still be able to flash Hard SPL on but don't pick any roms with the radio cooked in as they WON'T flash.
Cheers...
ultramag69 said:
The fact you have no radio is probably your BIGGEST problem.The no GSM error is what makes most bricks. Up til now there is no reliable surefire fix.
Looks like you have a PDA on your hands but no phone functionality. You can load an os only rom - generally they are the cooked roms, but you have more chance of jumping off a cliff and instantly growing usable wings than fixing this in a hurry...
Sorry to be the bearer of bad news. but thats why the unlocker won't flash on, it replaces the radio rom to something that allows the sim/cid to be unlocked.
You should still be able to flash Hard SPL on but don't pick any roms with the radio cooked in as they WON'T flash.
Cheers...
Click to expand...
Click to collapse
yeah i kinda thought that was the case. Since the unlocker replaces the Radio ROM, but the frustrating thing is that the HardSPL isn't flashing. Stupid VISTA. Let's say i am able to flash HardSPL. can't i flash a Radio ROM only? or the original ROM found on the wiki.
Maybe, people somteime can recover their radio roms flashing a radio only rom or the original shipped rom, BUT, if this doesn't work then there seems little hope of you actually fixing this problem.There are quite a few threads with numerous "I got it working" posts but then those same people are back the next day bemoaning the fact that it didn't work. If by some miracle you do get it working, make sure you post what happened and how you fixed it but wait a day or two to check it really is fixed or just faking you out.
Good luck, I think you're gonna need it....
And don't get me started on Vista
Cheers...
ultramag69 said:
Maybe, people somteime can recover their radio roms flashing a radio only rom or the original shipped rom, BUT, if this doesn't work then there seems little hope of you actually fixing this problem.There are quite a few threads with numerous "I got it working" posts but then those same people are back the next day bemoaning the fact that it didn't work. If by some miracle you do get it working, make sure you post what happened and how you fixed it but wait a day or two to check it really is fixed or just faking you out.
Good luck, I think you're gonna need it....
And don't get me started on Vista
Cheers...
Click to expand...
Click to collapse
WOW, first try on XP and HardSPL flashed like that (snap).
well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
omegafunky said:
well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
Click to expand...
Click to collapse
If I were you I would use the Titan relocker to default to your stock bootloader. Then install the Stock Sprint ROM from my HTC unlock tools directory. Now after that is done reinstall the olipro 2.40 bootloader. You need to be booted up to a functioning WM OS. Make sure memory card is removed and follow this. Run the Olipro 2.40 unlocked Bootloader and follow its instructions until it comes up saying you must unplug and plug the phone back in. PLEASE dont miss that, DO NOT hit a key to continue UNTIL you have UNPLUGGED the phone waited a moment, then plugged it back in. Then you can hit a key and continue but PAUSE again and minimize that window. Now right click the Active sync icon on your PC's taskbar. Pick connection settings and then look for the Box with Allow USB connections. Clear the box (disable) the usb connections. Then click OK. Now open the window back up and click to continue. That will exit the Bootloader and reset the phone.
Now you can flash A GPS RADIO 3.35.04, 3.42.40, OR 3.42.50 AND THEN A CUSTOM ROM using an RUU or by using the MicroSD method. Hope this helps. But your problems sound like a bad flash.
PS: If you jumped into custom ROM flashing not knowing what you are doing. That is on you.. This thread should not be in this subforum to begin with so if you still cant get up and running I will gladly have it moved.
Thanks RyanMogul6800
1.- can you post the Olipro 2.40 because I found one in this link (http://forum.xda-developers.com/showpost.php?p=1941281&postcount=6) but I dont know if is the correct version, I leave you a pics abouy my problem
2.- you say that I need to be running windows mobile to apply again the Olipro or it can be apply in radio mode?
This is when I instal the multicarrier light version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This others is when I tray ti install a sprint ROM
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
RyanMogul6800 said:
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
Click to expand...
Click to collapse
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
omegafunky said:
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
Click to expand...
Click to collapse
No problem buddy, I am here to help. And your English is very good. I think by fit you mean fix, but I know what you mean.
Also I just released my Carrierless versions. Click my name and goto my homepage then look at the folders on the right of the 4shared page that comes up. Also if you want to try my 21054 6.1 builds they are also accessible by clicking on the "other share space" link. Versions 1.5 and 3.0, Zero G is another Carrierless version. Very light on resources. But Zero G is stripped bare. Meant for enthusiasts only.
1.5 is the same as 1.1 just a newer build. 3.0 is the same as 2.0 just a newer build.
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
Yea remove the memory card and only use a main usb port on your Computer (port built into the motherboard, not a hub)
Also I forgot to mention, after each bad flash use the Exitbl.exe to get out of bootloader. Then re-put it back in bootloader manually to try again. Use Winrar, or 7zip to extract the contents of olipro 2.40 into a folder to get the Exitbl.exe.
Also since you dont have a functioning Windows Mobile OS to use Synced Active Sync (green icon in taskbar) are you trying to flash the Stock Sprint ROM with Active Sync connections disabled in the PC's taskbar (icon should not be green, should have a little x over a white icon.
I noticed in your screenshots it doesnt look like you are using Windows XP..
If you are using Vista, or Windows 7 then I cant help you. Those are not recommended operating systems for phone flashing..
You might have to use a friends computer with Windows XP and install active sync 4.5 on it. etc..
Im usin windows xp, well i cant do that the "TitanRelocker" run very well, i have the mogul coneccted to the pc, and run the "TitanRelocker" I press a key and later send me this menssage, I choose yes a lot of times but always send me the same menssage in bootloader mode
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and get the Stock Sprint ROM to flash. And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
RyanMogul6800 said:
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and . And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
Click to expand...
Click to collapse
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
Click to expand...
Click to collapse
Ok im done.. I guarentee if I had the phone in my hands I could get it fixed in 15 minutes tops..
This large disclaimer is in the beginning of my ROM threads for a reason..
Make sure you know what you are doing before you attempt to flash a Custom ROM onto your device!!
I had the same issue with flashing my phone.
I could not for the life of me get a radio to flash using a usb connection.
I had to use the non-highspeed 2gig SD card to flash my radio and then my first ROM. Worked first time. No fooling with computers that are not compatible with the flashing process.
use the search function, you will find the instructions....
cheers.......
and wow Ryan - you are extremely nice to have helped him along this far. You need to make a clear trouble shooting wiki page, and then point people in that direction.
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_ 4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION.
Click to expand...
Click to collapse
Yea and another possibility is that you could of tried restarting your computer and trying again. Sometimes when you have a bad flash or errors the RUU utilities refuse to work until a reboot of the Computer.
anyone know where I can find the HTC Mogul Sprint ROM 2.16.651.0???
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
drewcam888 said:
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
Click to expand...
Click to collapse
I am the only one that tried to help this person from the moment he started this thread. If you didnt notice I tried everything under the sun. If this person does end up getting it, it will not be because of you. It will be because of what I taught him already finally getting through.
Drew, you do not help anyone. You put your in your two cents in lots of threads usually short answers that only mislead someone further. All someone has to do is click your name, and find all posts by this user and sit back read and say OMG what an idiot.
You have yet to make any contributions that help out any forum. You are just a bantering PITA. You say useless garbage to just up your post count.
I on the other hand, help people. I spend a lot of time on my ROMs and software. I dont use Navizon links to make money off of people like you try to do.
You think you are invincible or something buddy? Say one more thing about me and you will be repramanded or worse. Trust me on that..
Again I will state for you omegafunky. If you want step by step help pm and I can chat with you. I can help you fix your issues.
And wow Ryan thats an earful. And wow why the need to feel you have to threaten people.
after rom flash it just went dead, no light, no bootloader no nothing.
tried hard reset, pressing different button and it wont work no bootloader to load other roms.....
What ROM did you flash? I read this before that someone flashed the wrong ROM to their new HD2 and bricked it. I couldn't find the posting. I think there wasn't any solution since you need the bootloader to flash the ROM. The only suggestion was to find someone that can factory program the phone and hopefully restore it with the correct bootloader and ROM.
Sorry to hear it, but hope it helps
more info would be a good start. which hd2? what rom? hspl2? hspl-1024?
ah Sorry about the missing info.
HSPL2 on a tmobile USA version.
HSPL2 installed flawless it went dead right the way after flashing the ROM-Version:RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
well there is your problem. The tmous 1024 only supports roms based on a 2.10 base. You have flashed a 1.72 based rom. I dont know if it recoverable, you should start in the rom development section. (And also the new tmous rom develoment section.)
Best of luck.
Also, (and do correct me if I'm wrong here) but I'm pretty sure you want to avoid ROMs with Radios since (I think) that will brick the USTMO HD2 as well. (unless of course it's the same/TMOUSA radio)
IM with you... just done bricked my hd2 right now to. wanted to test UK rom with im running tmous.... Everyone warned me!
Why do people not read thing before they do things?
jagger2k said:
Why do people not read thing before they do things?
Click to expand...
Click to collapse
im guessing sometimes a thread gets so cluttered that it gets too long for a person to read each post and then just skips around. im guilty of doing that and sometime i do miss some vital information.
hope you can unbrick your hd2.
i got a telstra coming that i will be using on at&t, hope i get all the info before i start flashing mine
Poohball said:
ah Sorry about the missing info.
HSPL2 on a tmobile USA version.
HSPL2 installed flawless it went dead right the way after flashing the ROM-Version:RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
Click to expand...
Click to collapse
I wanted to ask if you ever managed to unbrick your HD2?
I flashed the same ROM - which is SILLY - and bricked my HD2 - only 1 day old...
I am hoping if anyone could find a factory bootloader so that I can have my babe reflashed to TMO???...
Pls pls help...
Can someone help me unbrick my HTC HD2 give me link HELP!!!
I hate to say it, but the reason that it's called a 'bricked' phone is because it's not fixable (at least not at this time, and likely never).
If you can't get to the bootloader there's nothing you can do.
NOthing yet guess? as long we could always turn it back to tmobile. Which I did so Im getting mine this week. I love tmobile for customer service. Anyone knows how HTC goes about refurbishing these brick devices?
someone needs to find out how htc goes about with these refurbish devices. we need engineers on xda!
what has been bricked can't be unbricked!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
babydreamer1520 said:
someone needs to find out how htc goes about with these refurbish devices. we need engineers on xda!
Click to expand...
Click to collapse
they almost certainly either use a jtag connection or just swap out the bios/bootloader chip. Id bet a years wage theres nothing they can do over usb.
In short if u have flashed a tmob rom on a standard hd2 or vice versa your device is ****ed.
jagger2k said:
In short if u have flashed a tmob rom on a standard hd2 or vice versa your device is ****ed.
Click to expand...
Click to collapse
actually I'm pretty sure the tmous roms will work on normal hd2, after all, every cooked rom that unlocks the 576 ram is based on the leaked tmous roms.
anyone confirm for me please?
samsamuel said:
actually I'm pretty sure the tmous roms will work on normal hd2, after all, every cooked rom that unlocks the 576 ram is based on the leaked tmous roms.
anyone confirm for me please?
Click to expand...
Click to collapse
I can't confirm, but that's what I always thought as well
So much for it being impossible to brick an HPSL flashed HD2!
If the bootloader isn't loading at all, you have absolutely no hope of restoring your device via USB and if the bootloader isn't loading, you wont be able to restore it from SD either. The device needs to be responding to USB commands for it to be flashed via USB. Does the PC detect the device at all when it is plugged in?
I am not familliar with the internal archetecture of these devices, but if the bootloader is stored in a dedicated chip, you can theoretically boot the device with another bootloader chip, then hot swap the chip to your dead one and reflash the device, but this of course relies on the chip actually being plugable and not soldered to the motehrboard which I highly doubt would be the case. I have done this successfully on computer motherboards when I have farked the BIOS with a bad flash, but those chips are PLCC plug type chips so they are easy to hot swap.
The only other option is to reflash the chip via a JTAG connection, but this would have to be done by HTC or a service center with the appropriate equipment.
Hi folks! Please help me! I killed tons of nerves because of this phone!
So here is my sad story. 1 Year ago i bought second hand HTC HD2. Seller told me that phone is locked to T-mobile(Not US one!! UK one!! Transaction was held in UK). After I got phone I rushed home to install Android and I was successful at this point. Then I bought a unlock code from ebay, so I Finally could make phone calls. Then I realized that the only way I can insert code is putting back WM 6.5. And here the worst part starts. I read hundreds of manuals but still was unsuccessful. I downloaded many official WM 6.5 ROM installers but they didn't flash my phone. They just got stuck at 0% and error pops up. I was trying it for a week and then I just raged and put phone to the shelf and was waiting til I get will power to start over again.
I hear that every phone needs its own ROM installer for particular region and operator but I couldn't find UK T-mobile ROM so used many others and it didn't help.
I also heard that by IMEI it is possible to find to what operator the phone is locked(just to check if seller didn't lie me) but again I didn't manage to do so.
Here is my IMEI 354120035834066
Please experts help me, little nooby, with this horrible situation.
thank you
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
samsamuel said:
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
Click to expand...
Click to collapse
Thank you, but always when I am trying yo install HSPL4 critical error comes up. I think it comes up because I have spl 2.1000000 which should be 2.08 I found information that in order to downgrade to 2.08 I need to flash official ROM. But when I am trying to do so it is always stuck on 0%...
I am so $%^& up ...
any ideas?.... thx
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Mister B said:
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Click to expand...
Click to collapse
Hi. Thanks for ROM, but still.. got stuck on 0% and doesn't go further..
When I try to install HSPL4 it always gives me critical error...
Fixed my problem. Now everything works fine!! Thank you very much guys!!
how ??
rom4eg said:
Fixed my problem. Now everything works fine!! Thank you very much guys!!
Click to expand...
Click to collapse
explain