Hello,
I am contacting you because I have a problem with my phone TG01.
In fact, I had the intelligence (French irony) to put a code into the phone to prevent change sim card, for example if I were to lose it.
However, I recently changed mobile operator and SIM card accordingly. The phone is unlocked, I'm doing the procedure with Orange at the time. However, I do not remember the code I put in place to prevent change sim card.
If you have an idea to make my phone work again, she is welcome
I said that I have tried new ROM and also I reinstalled the original ROM ... Nothing changes ...
Quentin65 said:
Hello,
I am contacting you because I have a problem with my phone TG01.
In fact, I had the intelligence (French irony) to put a code into the phone to prevent change sim card, for example if I were to lose it.
However, I recently changed mobile operator and SIM card accordingly. The phone is unlocked, I'm doing the procedure with Orange at the time. However, I do not remember the code I put in place to prevent change sim card.
If you have an idea to make my phone work again, she is welcome
I said that I have tried new ROM and also I reinstalled the original ROM ... Nothing changes ...
Click to expand...
Click to collapse
If you changed the PIN from default i.e. 1234 or something similar, then all you can do is go to one of the websites where you can pay and get this unlocked.
However, one thing to try before that is - call the operator whose SIM you used first. That operator help you unlock that SIM LOCK and then you can re-insert the new SIM. It might also be helpful if you try and ask your new operator if they can help (highly unlikely!)
Related
After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
florin_m said:
After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
Click to expand...
Click to collapse
It could be a problem with the SIM unrelated to unlocking.
Does the SIM work in another phone? Does the SIM that came with the XDA2 still work? Have you tried another hard reset?
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
florin_m said:
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
Click to expand...
Click to collapse
So you also re-flashed it with a different ROM? I suspect that the problems are more related to this than due to the unlocking. The unlocking uses the official interface and no unorthodox methods are used to unlock it. I've had no reports from anyone that the phone did not work afterwards or even that the unlock code did not work. It is important to consider all aspects that could have influence else you might be hunting for the wrong solution.
Don't know what is realy rong with it. I locke it back (AT%HTCLOCK...) and now radio at least saying Searching (with same firmware). Do u have a full gsm backup (tunning as well?) maybe is something messed there.
I use ICQ or MSN or Yahoo messager can u please PM with ur details saw we can chat live?
Thank's
Try to change the band
HOW?
Radio does not work after unlock
Got the unlock code from Cingular. The code was accepted. Entered T-Mobile SIM but then phone will not make or receive calls. Even after putting original Cingular SIM it will not work.
Inserted another Cingular SIM and attempted call. It starts working. However, if I put T-Mobile SIM it would go back to same state.
Any help would be appreciated.
It is MDA 3 from Siemens for Cingular with Radio version 1.02.10
Hi!
I have CID unlocked my 3100 (already SIM unlocked) and I flashed WM 61 Pro V1g everything is working fine but the problem is it's working only, on the one SIM card I used while unlocking the phone. Any other card I put in (even cards from the same carrier) it gives me "SIM failure" so normaly I can't turn on the phone function. Can anybody help me at what could be the cause.
P.S.: I have tried flashing other ROMS but it's the same thing on every one.
I have tried to CID unlock the phone with another card in but it's the same.
Ex Cingular 3100 now WM 6.1 Standard
OS 5.2.19202 by pArtizAn
Radio 4.1.13.34_02.79.30
Hi! Again...
To clear something up I did tried a different Radio and now I can use 2 of 3 providers in Switzerland (Orange and Swissscom) but the 3rd one Sunrise (the one I am using) want work. I tried two sifferent Sim cards from that provider and they both gave me a Sim failure.
Could that have to do something with the voltage of the card or is it something else.
Please I need help, cause I realy want to use this phone but I can't just change providers because of the phone.
Help!!! Please.
colovic said:
it gives me "SIM failure" so normaly I can't turn on the phone function.
Click to expand...
Click to collapse
i had the same problem on Qtek 8500 with new Beeline SIM-cards. The problem was solved by changing that new SIM card to older.
Thanks for the answer but my SIM card is from 2003 so any older would not be an option. I just thought it had something to do with the radio or the ROM and maybe could be fixable but thank you anyway and keep up the good work, the WM6.1 Pro is great!!!!
P.S.:Kosovo was and will always be Serbia.
A friend of mine had one of those disposable phones & I took the sim out and put it into my unlocked 8500 to see what would happen. I got the same error, sim card failure so it might be that while your phone is unlocked, your carrier may have locked the sim. Just my .02 on that one.
Hello everyone. I have one Hero100. I have the code for unlock but the phone has failed to unlock. It's locked on orange. When I enter the code , I get no service on the screen. and when I restart it, it asks for the unlock code again. How can I go about this? Its a bit strange.
sounds like orange gave you an incorrect code...
you have put a NON-orange sim in when you try this, yes?
if it fails again, go back to orange and ask for the correct code, as they have the wrong one.
The code is working. When I put the Code I get a successful msg but it wont pick up the network and also when it restarts it asks folr the code again.
The same
I have got the same problem.
I have got that unlock number but after unlocking phone, there is no range at all and info 'no service', but i am able to use 'Sim Toolkit'.
Where is a problem???
hi i'm having the same problem code is gud and it works but after that it says no servic. and when i restart or put any other sim again and turn on the phone it again asks for the code . whats wrong plz
I think not so many people have seen this phone.
I am also having this issue. Simlocked to Orange got my code and put it in and it was successful then it just stays on the 'unlocking sim' screen.
Been using HTC with windows mobile for years but decided to try android. Am I doign something wrong as I cant seem to access any phone fucntionality without putting a sim in then I get this problem we are having.
On a WM device you would still be able to access everything without having a sim in- just using it n PDA mode
, I am having the exact same problem. I have a HTC hero from orange as my contract phone. I have bought the unlock code from from swift unlock (ebay) and entered the code when prompted. The phone says the network is unlocked but the I can't get any network service, and if toggled the flight mode on and off or switched the phone off and on it will ask for the code again. If I put the orange sim in everything is back to normal. I even tried to hard reset the phone and have a fresh start while the unsupported sim is inserted but the same happens again with the addition of a message "unlocking sim". I thought the code was wrong or something, so I got the code again this time from a high street shop and it was the same code. So nothing is wrong with code itself. The guy at the shop told me that he has great problems with unlocking this phone as some seem to accept the code without any problems and others have this no service issue and he doesn't know the reason for it. I am thinking of flashing a new firmware and radio and see what happens, but this will be probably tomorrow. Sorry for my long post, but I wanted you to know that there is nothing wrong with code itself.
Yeah I dont think there is a problem with my code either. Im new to android but have been a winmo user for years, I havent rooted my Hero yet (only got it today) but that was going to be what I try next: root then network unlock.
Let us know what happens when you flash yours.
Possible Solution
When i unlocked my phone i thought the exact same thing, that it hadn't worked - it said no network, something something about my sim, etc. Later on though, I went outside and it was working. Unbelieveable i thought. Turns out when your in an area with no reception (my house) the Hero decides to boldly make sure you know that it's not getting any signal by giving you big scary messages
So once you've entered the unlock code, let it load up the UI fully, turn phone off, and then turn on again and put it somewhere you definately get a recpetion
Anyway this might answer your problems, then again might not.
Thanks for the suggestion but I dont think that is the problem in my case as I do get reception. Although for me once I have put the unlock could it it says success (or whatever) then goes to saying 'unlocking sim' it doesn't atually load up any interface.
Out of intereset where did you (all) your get your unlock code? I got mine from Unlock Now, anyone else got a code from them and can confirm it works?
Hi, I have flashed the new modaco 2.2 rom, and inserted the unsupported sim, but sadly with the same exact result "no service". I then flashed the latest radio from modaco, and repeated the steps but this time after the first time you put your unlock code it will say "no service as usual" but if you try to toggle flight mode on and off the phone will prompt for the code again and then it will greet you with a no sim is inserted or so, so it seems with the new radio the phone doesn't even detect your sim. If I put the orange sim everything is back to normal again even with the new radio.
hi guys first time here, i have galaxy s2 i9100 says claro when booting, not sure which country, it has spanish and portugues in the languages ., when i do the test for network lock, all four values say off, when i put my simple mobile Sim card , i swap the screen after starting it says network locked, and a figure of padlock, and a button of dismiss, nothing else no place or option to put unlock code, i press dismiss, and back to use all functions of the phone , but no phone service or network, i realized when i put the simple mobile card it addS gsm on the network options and it gives me t mobile and at&t as options when click any of them it fails to register to any, i gave it to my expert friend , he told me it is hardware locked for too many attempt to unlock it, and he will do software unlock , after three days he told me no way it is permanently locked no way to do it at all?? the phone runs android 2.3.4 model gt-i9100, baseband version i9100uhkg4, kernel version [email protected] #2, BUILD NUMBER GINGERBREAD.UHKG7, MY FRIEND TOLD ME IT CAN ONLY WORK ON ORANGE CARRIER WHICH WE HAVE NONE IN US, I EVEN OBTAINED UNLOCK CODE FOR IT BUT NO PLACE OR OPTION TO PUT THAT CODE, PLEASE HELP THANK YOU
You flashed a branded ROM, Claro is a mexican mobile network.
Why don't you go ahead and flash an unbranded ROM?
either way, you're gonna have to deal with the sim lock.
if you have a code, just insert a diffrent carrier on you device and the code screen will pop up when android starts.
here's a few threads that could help you with that matter:
http://forum.xda-developers.com/showthread.php?t=1360174
http://forum.xda-developers.com/showthread.php?t=1092451
http://forum.xda-developers.com/showthread.php?t=1289395
http://forum.xda-developers.com/showthread.php?t=2070375
http://forum.xda-developers.com/showthread.php?t=2069517
PS: Read before you do anything!
Hi all,
I have a strange problem with my phone. Hope someone will be able to help me.
I was not sure if my phone is unlocked when I came on holiday. Bought and put a different provider sim card and there was no signal. Also showed nothing to type unlocking code, so I thought that maybe something with a new sim card is wrong.
I bought a second card from another provider to be sure. On the screen appeared: enter sim network unlock code or something like that. ok so I have to unlock.
Now the strangest thing. when I put back my old sim card (o2), on the screen appeared again: enter sim network unlock code!
Since then I can not use the phone because it still asks for the unlock code.
I tried to change the soft but still do not have signal and no longer asks for the unlock code. anyone know how to force a window to enter the code?
I tried unlocking code from a cellunlocker but not working and and when i switched on my mobile is showing invalid SIM card.
someone has any ideas of what i can do with it?
sry for my english