Ok so I could not wait for a stand and did not want to go put $$ down on something that was not perfect fitting for the Gtab.
I have lots of tools and wood, so here is my 15min $0 Gtab stand.
I used a piece of scrap PERGO flooring from when I did my kitchen that matches the wood on my desk and it has a foam underside built on to it for no scratches.
I have felt pads in the corners where the tablet touches.
Tab sits at a 45 degree angle. I already have ideas for a adjustable version as well that may swivel.
it has my my enjoyment of the gtab better.
copc said:
Ok so I could not wait for a dock and did not want to go put $$ down on something that was not perfect fitting for the Gtab.
I have lots of tools and wood, so here is my 15min $0 Gtab Dock.
I used a piece of scrap PERGO flooring from when I did my kitchen that matches the wood on my desk and it has a foam underside built on to it for no scratches.
I have felt pads in the corners where the tablet touches.
Tab sits at a 45 degree angle. I already have ideas for a adjustable version as well that may swivel.
it has my my enjoyment of the gtab better.
Click to expand...
Click to collapse
So its a stand, not a dock. Oh.
Very nice. I wish I was that crafty with wood.
h4x0rjdag said:
So its a stand, not a dock. Oh.
Click to expand...
Click to collapse
You are correct and I stand corrected. it is more of a stand at this point. It could turn into a dock down the road if the one viewsonic makes is not up to my standards I guess.
Thanks for pointing out my mistake, it has been updated.
Very nice, I was thinking about something like this, but much smaller. Something like a kickstand on the device with rubber feet, not sure why they didn't build something in for using with keyboard, but I guess that is what their dock will be for.
Here is my Lego stand. I actually made it for my EVO but the Gtab fits as well.
katmandu421 said:
Here is my Lego stand. I actually made it for my EVO but the Gtab fits as well.
Click to expand...
Click to collapse
Awesome, I did not have any lego's or that would have been easier for sure.
katmandu421 said:
Here is my Lego stand. I actually made it for my EVO but the Gtab fits as well.
...
Click to expand...
Click to collapse
Ahh the Joy of Legos... I gave my 5 yr. old son, who reminds me he is 12 yrs. old in Lego years, my ZT-180 tablet with a Lexar 32GB USB disk loaded with 19 hours of 'Star Wars the Clone Wars' episodes... and sure enough I found him watching it on the floor while playing Lego with Star Wars characters and he had incorporated the tablet into his 'Command Ship' that he was building...
He used a LOT more pieces to hold his tablet up
I don't know if my son would let me have the lego pieces to build that, I would have to fight him for them!
I saw a video on youtube of a guy using a wooden plate stand, like a tripod. He got it for $10 at some store, probably WM or Target. Submitter was ehunyadi
pt91 said:
I saw a video on youtube of a guy using a wooden plate stand, like a tripod. He got it for $10 at some store, probably WM or Target. Submitter was ehunyadi
Click to expand...
Click to collapse
This is really the best cheap stand... I used to use one when I had my GenTouch.
Mine was black and actually looked really slick... I'm sure you could find a variety at any thrift store. Found mine layin around the house somewhere.
i bought a stand and it just came in. it works nicely and it was only 7 bucks
You can also use a business card holder from an office supply store. The metal mesh ones work good because they do need a slight bend in the top to add stability.
kohala said:
i bought a stand and it just came in. it works nicely and it was only 7 bucks
Click to expand...
Click to collapse
Where did you get that? That's perfect for the car seeing as I drive like 5-6 hours a day.
I still like mine...
http://forum.xda-developers.com/showthread.php?t=844777
kickinradical said:
This is really the best cheap stand... I used to use one when I had my GenTouch.
Mine was black and actually looked really slick... I'm sure you could find a variety at any thrift store. Found mine layin around the house somewhere.
Click to expand...
Click to collapse
I know I posted my quick stand on slatedroid, but not sure about here. One more time:
http://www.youtube.com/watch?v=JuSKRFmle90
You can also adjust the angle of the tablet by drilling a few more holes in the base closer to the slot. If you dont have the tools for the slot, just glue a strip of wood where the slot is. Simple!
what's point of tablet if you are going to use it like laptop?
katmandu421 said:
You can also use a business card holder from an office supply store. The metal mesh ones work good because they do need a slight bend in the top to add stability.
Click to expand...
Click to collapse
You were right had to add a little support to it but it worked out just fine.
Love the LEGO Stand!
Awesome stand! You got any schematics for the build? ;P Really awesome I'm seriously considering building one, oh and getting Lego for my son too.
Good job!!! I may have to try this out myself. For now I bought a picture frame holder from amazon that works quite well.
Related
I found some bookends and bent them to a certain angle for my g-tablet.
Now have to hunt for the case and the Anti-Glare SP.
Not too shabby.
That looks nice! Paint it flat black and you have a nice stand!
I need something like that, I was thinking of asking one of my coworkers to weld me a stand with thin steel bars to my dimensions.. Though this looks easier to make.
Inspired
Just saw your bookend stand and dug through my closet. Happened to have brand new black 6" bookend that works perfect. Thanks for posting the idea, saved me some money!
I found this bad boy at Michael's for $3.99. What I like about it is that it is infinitely adjustable, so you can position the G-Tab upright, or lean it way back to make it easier to type with both hands. It also folds pretty much flat, and can easily fit inside the $5.99 Sears case. Bought two, one for home, one for the road.
festivus said:
I found this bad boy at Michael's for $3.99. What I like about it is that it is infinitely adjustable, so you can position the G-Tab upright, or lean it way back to make it easier to type with both hands. It also folds pretty much flat, and can easily fit inside the $5.99 Sears case. Bought two, one for home, one for the road.
Click to expand...
Click to collapse
Thanks for this tip. Just picked one up!
acooper said:
Just saw your bookend stand and dug through my closet. Happened to have brand new black 6" bookend that works perfect. Thanks for posting the idea, saved me some money!
Click to expand...
Click to collapse
Thanks for the tip, I did the same (a old bookend) and I am very happy with it. now, I can use the G-tab as a 10 inch picture frame at work as well (just make sure turn off the auto-shut off feature for the screen + plugin AC power).
I found this wonderful stand for the Gtab. this is what I was looking for. I ordered one and it will be arriveded on Dec 22. Will provide you with pics when I get it this the link
http://www.amazon.com/Arkon-Portable-Fold-Up-Galaxy-BlackBerry/dp/B000CKVOOY/ref=pd_ecc_rvi_cart_1
update: 12/21
just received 5 mins ago. very easy to use out of the box. really like it nice purchase.
beepoo83 said:
I found this wonderful stand for the Gtab. this is what I was looking for. I ordered one and it will be arriveded on Dec 22. Will provide you with pics when I get it this the link
http://www.amazon.com/Arkon-Portable-Fold-Up-Galaxy-BlackBerry/dp/B000CKVOOY/ref=pd_ecc_rvi_cart_1
Click to expand...
Click to collapse
I ordered the same one from The Mount Guys... Plus a holder for the car.
[email protected] said:
I ordered the same one from The Mount Guys... Plus a holder for the car.
Click to expand...
Click to collapse
That looks pretty nice.. and portable, but I wonder how stable it is with only a vertical support in the middle of the back. What about typing toward the sides, will it be stable?
My wife actually bought a picture frame holder for$2.99 and surprisingly it works great!
hogasswild said:
My wife actually bought a picture frame holder for$2.99 and surprisingly it works great!
Click to expand...
Click to collapse
Thats what I'm using now.... SMILE...
I want the stand just for display.... I have a wireless keyboard and mouse that work perfectly!
I had gotten one of these...It works, but not great. It is made for a netbook, so when it sits in there it is very low. On mine the only way it was useable was to balance it on the swivel point.
I ended up getting the BookGem (Also available from amazon) and I love it. I actually have two of them!
hogasswild said:
My wife actually bought a picture frame holder for$2.99 and surprisingly it works great!
Click to expand...
Click to collapse
Where did she get it? And care to share some pics?
Just in Michael's I think. It's nothing special to behold. Just a typical picture frame holder. It looks something like this: http://www.salinepictureframe.com/showroom/products/8in-ebony-wooden-stand/
They have those at Walmart for $3.50 or so I believe. Do a quick search on this forum on my username for a picture of the one I got at Michaels for $3.99 (actually $2.00 with the 50% off coupon!) the other day. I like it because it is completely adjustable, which is important in light of the comments regarding viewing angle in portrait.
[email protected] said:
Thats what I'm using now.... SMILE...
I want the stand just for display.... I have a wireless keyboard and mouse that work perfectly!
Click to expand...
Click to collapse
What kind of wireless mouse & keyboard are you using?
The bookgem looks like a neat and portable stand. Will have to try it out. The photo stand is one that I think I will buy for home use. Great idea indeed. Can't see myself luggin it around to the office lol.
[email protected] said:
What kind of wireless mouse & keyboard are you using?
Click to expand...
Click to collapse
Logitech wireless and mouse... Works PERFECT!
BookGem stand for the G-Tablet
S2W said:
The bookgem looks like a neat and portable stand. Will have to try it out. The photo stand is one that I think I will buy for home use. Great idea indeed. Can't see myself luggin it around to the office lol.
Click to expand...
Click to collapse
I bought a BookGem from amazon.com. I love it. It clamps (spring loaded) onto my gtab so that it is securely attached and moves when I move the gtab around. It can be clamped on the top as well but that doesn't work as well because the gtab border is narrower there and so it is actually clamping onto the screen a little bit which interferes with tapping, i.e., the gtab only supports two finger presses at a time and it thinks the clamps are finger presses.
It has rubber pads on its feet and on its clamps.
I also like that it folds up flat so it fits in my carry-all for convenient transport.
Anyway I like it so much I bought a second one for my other gtab.
[email protected] said:
Logitech wireless and mouse... Works PERFECT!
Click to expand...
Click to collapse
Oh I am glad to know about this. I am using mine as desktop replacement too, and I went ahead and got a USB keyboard since I will mainly be using the keyboard when I have the tablet on my desk and plugged in. I figure I will get one of those things that lets you plug a bunch of stuff into one USB and then I can use my old mouse which is still good.
I am also using a "cheap" rubberized wire book holder that I found 2 for $5 or something like that at amazon. I think the postage cost more than the holder but it works GREAT and I can still fold it up if I needed to put it in the tablet's carrying case or something.
My Microsoft wireless does not work, I am thinking about the HP BT keyboard.
Here is my g-tab on a $3 stand.
beepoo83 said:
I found this wonderful stand for the Gtab. this is what I was looking for. I ordered one and it will be arriveded on Dec 22. Will provide you with pics when I get it this the link
http://www.amazon.com/Arkon-Portable-Fold-Up-Galaxy-BlackBerry/dp/B000CKVOOY/ref=pd_ecc_rvi_cart_1
update: 12/21
just received 5 mins ago. very easy to use out of the box. really like it nice purchase.
Click to expand...
Click to collapse
Received mine today from Amazon. Wow, what a great little piece! A lot more solid than you would think. I can type and tap pretty hard and it doesn't budge at all. Very adjustable and works horiz and vert.
Highly recommend this!
Nice.. I just ordered this from ebay.
This custom mount is what I'm currently using .
I got one as well. I like it, but it was a little bulkier than I was expecting. Still a great product.
I agree it's a good product. Tried the plate stands
http://www.amazon.com/Arkon-Portable-Fold-Up-Galaxy-BlackBerry/dp/B000CKVOOY/ref=pd_ecc_rvi_cart_1
Posting another review... This time of a BookGem for those still searching for a stable stand for our G/Tablets.
Its very stable and portable (IMHO).
Check the review and let me know what you think of it, or if you also have the bookgem stand.
Review of BOOKGEM (stand)
http://www.youtube.com/watch?v=6eBzXhsADD0
Review of the Kindle DX case
http://www.youtube.com/watch?v=33nHFhjZKZU
I'll reviews more products for our Gtablets as they come in.
Saved for another review...
Thanks S2W for the review. I have a question for you. I also have the bookgem but don't know if mine is defective. When opened the gem sits on the front spring rather then the the two front feet. It seems like there should be a rubber pad on these (to stop it from sliding and holding the gem above the spring hub). Does yours sit this way?
kduffman said:
Thanks S2W for the review. I have a question for you. I also have the bookgem but don't know if mine is defective. When opened the gem sits on the front spring rather then the the two front feet. It seems like there should be a rubber pad on these (to stop it from sliding and holding the gem above the spring hub). Does yours sit this way?
Click to expand...
Click to collapse
Your welcome... The spring hub is aligned with the 2 front feet of my stand. I did notice that when I closed the rear legs, the spring hub is no longer aligned. Standing the bookgem this way will give you a bit of that teeter-totter action since its meant to stand on an angle. But don't care for it as much in this position since it becomes no longer use as a stand but closed to put away.
Overall, I like the stand. Hopefully you're within your timescale and can return it back if defective. IMO, Its kind of useless to me, if you dont have the front feet stabled and aligned because of the spring hub dropping lower.
We have to trust that our Gtabs are secured. So if your unsure I would return it.
Glad you you caught the video.
Book Gem
I've had my book gem over the weekend and had to make one mod.
just above the book gem sticker there were are two pyramid looking stubs.
I took an excacto knife (a box cutter knife should work as well) to reduce the stubs and filed the remain flat.
Other then that I love my Gtab Gem. With the legs in, it's easier to hold with one hand, imo.
(Add 'h' ) = http*******
ttp://i106.photobucket.com/albums/m252/boskilove/IMG_0777.jpg
ttp://i106.photobucket.com/albums/m252/boskilove/IMG_0778.jpg
S2W said:
Posting another review... This time of a BookGem for those still searching for a stable stand for our G/Tablets.
Its very stable and portable (IMHO).
Check the review and let me know what you think of it, or if you also have the bookgem stand.
Review of BOOKGEM (stand)
http://www.youtube.com/watch?v=6eBzXhsADD0
Review of the Kindle DX case
http://www.youtube.com/watch?v=33nHFhjZKZU
I'll reviews more products for our Gtablets as they come in.
Click to expand...
Click to collapse
Is this case crown case for DX at the Amazon?
rob_z11 said:
Is this case crown case for DX at the Amazon?
Click to expand...
Click to collapse
Yes it is... and here is a link to the case I ordered from amazon.
http://www.amazon.com/CaseCrown-Genuine-Leather-Interior-Compartments/dp/B002QI0X1K/ref=pd_luc_sbs_02_01_t_lh
S2W said:
Yes it is... and here is a link to the case I ordered from amazon.
http://www.amazon.com/CaseCrown-Genuine-Leather-Interior-Compartments/dp/B002QI0X1K/ref=pd_luc_sbs_02_01_t_lh
Click to expand...
Click to collapse
Thanks for the info. I will be ordering tomorrow.
Black leather case delivered
Thank you for your excellent YouTube review. I'm now enjoying the leather case that arrived today. An excellent fit, no problems with port access or power/volume buttons. Definitely adds class to the G-Tab experience. I highly recommend it!
Stand and Case Together
Great videos!
I really like both the case and the stand, but would like to use them together. Is it possible to use the gtab with the stand while it is still in the case? Maybe you could do another video review of both together
Anyone know of a Kindle DX case that folds over into a stand in landscape mode? The only ones I have seen the stand is in portrait mode.
Thanks!
I must thank you. I was going back and forth between getting the Kindle DX case and the Zec case. I was on the fence about the Kindle case, but your video review totally solidified my decision. Got mine in today, and I couldn't be happier.
Thanks, man!
Saw your review of the Kindle case on YouTube. It was instrumental in my decision to order it for every day use. Thank you for taking the time to put it up there.
I had ordered and received one of those cases with the built-in usb keyboard before I made this decision as the keyboard is not silicone and will damage my screen if I decided to use it every day. The other case also didn't really keep my tablet secure at all and I felt it would slip out of it at any given moment.
I stopped carrying my powerhouse laptop with me when I travel on business (with the power adapter it weighs about 20 lbs). Now I just carry my G Tablet and use LogMeIn Ignition for Android to remote in to my laptop I keep at my office. I kept the other case so I can use it when I travel on business and need to type a lot. But I am really looking forward to receiving this Kindle DX cover so I can use it every day.
rob_z11 said:
Thanks for the info. I will be ordering tomorrow.
Click to expand...
Click to collapse
BleuM&M said:
Thank you for your excellent YouTube review. I'm now enjoying the leather case that arrived today. An excellent fit, no problems with port access or power/volume buttons. Definitely adds class to the G-Tab experience. I highly recommend it!
Click to expand...
Click to collapse
craigwillie said:
Great videos!
I really like both the case and the stand, but would like to use them together. Is it possible to use the gtab with the stand while it is still in the case? Maybe you could do another video review of both together
Anyone know of a Kindle DX case that folds over into a stand in landscape mode? The only ones I have seen the stand is in portrait mode.
Click to expand...
Click to collapse
ayuforever said:
I must thank you. I was going back and forth between getting the Kindle DX case and the Zec case. I was on the fence about the Kindle case, but your video review totally solidified my decision. Got mine in today, and I couldn't be happier.
Thanks, man!
Click to expand...
Click to collapse
sjmoreno said:
Saw your review of the Kindle case on YouTube. It was instrumental in my decision to order it for every day use. Thank you for taking the time to put it up there.
I had ordered and received one of those cases with the built-in usb keyboard before I made this decision as the keyboard is not silicone and will damage my screen if I decided to use it every day. The other case also didn't really keep my tablet secure at all and I felt it would slip out of it at any given moment.
I stopped carrying my powerhouse laptop with me when I travel on business (with the power adapter it weighs about 20 lbs). Now I just carry my G Tablet and use LogMeIn Ignition for Android to remote in to my laptop I keep at my office. I kept the other case so I can use it when I travel on business and need to type a lot. But I am really looking forward to receiving this Kindle DX cover so I can use it every day.
Click to expand...
Click to collapse
Im excited that my videos helped make your decisions a bit easier. There is nothing like actually seeing something in action over still pics.
We are here to help eachother out, that's what a community is about and XDA is one of the best out there.
Will make more as I get stuff for our tables.
Enjoy...
In the video, it looks like the wings come in contact with the touchscreen itself when placed in portrait. In light of how strong those springs look, I wouldn't want them in contact with the touchscreen at all. Perhaps this case is more for landscape only?
festivus said:
In the video, it looks like the wings come in contact with the touchscreen itself when placed in portrait. In light of how strong those springs look, I wouldn't want them in contact with the touchscreen at all. Perhaps this case is more for landscape only?
Click to expand...
Click to collapse
After reading this post I tried to place the gtab on portrait and carefully examine what you stated above... with mines it doesnt touch the screen, I will say that the paddings are close by the border of the touch screen but does not effect it. I can only speak for myself on this.
Hope that helps.
Thank you SIR!
THANKS!
I was looking for something and came across your article.. Well Done!
I just ordered mine this morning.. Thanks to you..
~Robb
craigwillie said:
Great videos!
I really like both the case and the stand, but would like to use them together. Is it possible to use the gtab with the stand while it is still in the case? Maybe you could do another video review of both together
Anyone know of a Kindle DX case that folds over into a stand in landscape mode? The only ones I have seen the stand is in portrait mode.
Click to expand...
Click to collapse
I'm with the gentleman above. I would love to purchase this one but can it adequately be used as a landscape stand? That's really the make or break decision for me. I currently use the cheap carrying case from Sears to hold it so I may opt for the Bookgem or another case.
goalweiser said:
I'm with the gentleman above. I would love to purchase this one but can it adequately be used as a landscape stand? That's really the make or break decision for me. I currently use the cheap carrying case from Sears to hold it so I may opt for the Bookgem or another case.
Click to expand...
Click to collapse
It is a great video, but some people got lucky with this case as I have just received it, and couple of corner holders won't catch the corner really well in my case.
I am thinking about returning it.
rob_z11 said:
It is a great video, but some people got lucky with this case as I have just received it, and couple of corner holders won't catch the corner really well in my case.
I am thinking about returning it.
Click to expand...
Click to collapse
Thanks for the heads up. I ordered one yesterday. They haven't shipped it out yet so I could cancel but I think for $20, I'll take the risk. They do have great return policies.
I know the one with the keyboard is comparable priced but after putting aaron's back cover on mine, I don't really want to stick velcro on the back of it to keep it in place.
I guess I just should have opted for the Book gem and continued to use the Sears carrying case.
rob_z11 said:
It is a great video, but some people got lucky with this case as I have just received it, and couple of corner holders won't catch the corner really well in my case.
I am thinking about returning it.
Click to expand...
Click to collapse
I was just coming on to post this because it seems as if this company is selling a different case now. My case doesn't have the same sheen on the outside, nor do I have the larger pockets on the inside like the one in the video. Never the less, it seems to hold the tablet the same, so I'm fine with it. Best option I've seen for the price I paid. ( $18.50 with free shipping.) I should add that I'm fine with the smaller inside pockets, as they don't push on the screen like the one in the video, but I do wish I had the outer cover as it does look like a better quality than the case I have.
So now that everyone's GTabs are on the way, lets focus on the goodies!
Im curious, whats everyones favorite cover/case?
I know I want the dock, but what else is a MUST HAVE? I've even read about a screen protector that improves viewing angle?!?
If you have any good suggestions, please let me know, post the URL for people to purchase etc!
Just received my Skinomi carbon fiber skin. Was very impressed with the material, looks to be the same 3M stuff that "dash kits" use in cars. 24 shipped on amazon. I've heard it sucks to install - but my tab won't be here until Thursday to find out
Right now I have just purchased the "Skinomi TechSkin - Black Carbon Fiber FILM Shield & Screen Protector" from Amazon (Skinomi.com has a larger selection and coupon codes can be found online), based on the reviews there and in a thread over here (http://forum.xda-developers.com/showthread.php?t=904814) I believe is the best we can buy right now to protect the screen, I went for the full body kit as I have not yet decided on which case I will end with but will most likely be one with a keyboard so I can use it while in class.
I may pick some cheap capacitive pens down the road too just because you can get them pretty cheap and shipped straight to South America where I live
....I am a nOOb so can't post outside links yet....
I'm pretty happy with these...
Arkon Portable Fold-up Stand
Carbon Fiber ThinSkin in Black
CLIP - Folio Case
I bought a dock but didn't really find myself using it after I got it so I sold it off on eBay for a tidy profit.
I also had one of those cases with the built-in usb keyboard but found it looked way too cheap and didn't keep the gTab snug so I got rid of that on eBay for a tidy profit as well.
If you want a case with a built-in bluetooth keyboard I highly recommend checking out it2steve's web store for a case he calls the BlutO.
See link here.
As for a small bag to carry all of your gTab accessories, I recommend the Targus CityGear bag for 10.2 inch Netbooks. It fits everything nicely. The only negative about this bag for me is that the shoulder strap is not removable.
I almost forgot about the Skinomi Screen Protector. It is fantastic as long as you follow the directions and let the damn thing sit until it's completely dry after you've applied it (like 24 hours if you can handle it) and you will be rewarded with a screen protector that you can barely tell is there.
I would dearly love to get the BlutO but it's my understanding that it stays sold out.
So far I've ordered the dock from merimobiles, $42.75 with coupon code bienvenu
Needed the lan port for work since we can't turn on wireless due to sensitive client files.
Messenger bag from Bensoutlet dot com $7.98 shipped. Got one that looks exactly like this for my netbook from 1saleaday last year for $10 shipped and hope it's the same one, great little sturdy bag.
Lenovo usb keyboard remote w/ trackball, don't know if it'll work w/gtab or not but for $27 I can use it with something else if it doesn't.
Have a neoprene sleeve to put it in until I decide on which screen protector and cover.
Dern, why did I type all of this out? Now I know how much I've spent LOL
Metal_in_Silk said:
Messenger bag from Bensoutlet dot com $7.98 shipped. Got one that looks exactly like this for my netbook from 1saleaday last year for $10 shipped and hope it's the same one, great little sturdy bag.
Click to expand...
Click to collapse
Can you post the link for this? How much room does it have for other accessories?
clankfu said:
Can you post the link for this? How much room does it have for other accessories?
Click to expand...
Click to collapse
http://bensoutlet.com/products/netbook-bag
It has the removable shoulder strap and an outside zipper compartment. I can cram a pretty good bit of extra "stuff" in there, adapters, wireless mouse, flash drives, etc.
I have skinomi black carbon fiber skin.
Now I just need some protection for it.
Metal_in_Silk said:
http://bensoutlet.com/products/netbook-bag
It has the removable shoulder strap and an outside zipper compartment. I can cram a pretty good bit of extra "stuff" in there, adapters, wireless mouse, flash drives, etc.
Click to expand...
Click to collapse
thanks!
...
OT!
TheFlyingPig said:
I have skinomi black carbon fiber skin.
Now I just need some protection for it.
Click to expand...
Click to collapse
Just wanted to tell you I'm loving your nym
Bought a tshirt for the bf a couple of weeks ago that had a pic of a pig amongst the clouds with the caption "With enough thrust, pigs fly just fine" Hilarious
To make this post legal (and to satisfy my curiosity) how hard are these skins to put on? I bought screen protectors for my nook that I ended up wadding up and throwing in the garbage, couldn't ever get them to go on without steeeenkin' bubbles that irritated the crap outta me.
*@clankfu: You're welcome!
Metal_in_Silk said:
Just wanted to tell you I'm loving your nym
Bought a tshirt for the bf a couple of weeks ago that had a pic of a pig amongst the clouds with the caption "With enough thrust, pigs fly just fine" Hilarious
To make this post legal (and to satisfy my curiosity) how hard are these skins to put on? I bought screen protectors for my nook that I ended up wadding up and throwing in the garbage, couldn't ever get them to go on without steeeenkin' bubbles that irritated the crap outta me.
*@clankfu: You're welcome!
Click to expand...
Click to collapse
One more question for you. Do you think that messenger bag would fit a Gtab with one of these cases on it? Or is it already a snug fit with just the Gtab alone?
http://electroniccrap.com/store/index.php?main_page=index&cPath=5_9
clankfu said:
One more question for you. Do you think that messenger bag would fit a Gtab with one of these cases on it? Or is it already a snug fit with just the Gtab alone?
http://electroniccrap.com/store/index.php?main_page=index&cPath=5_9
Click to expand...
Click to collapse
I can't answer that yet because FedEx still has my gtab
But. I have one that looks exactly like this one that I keep my 10.1" acer aspire one netbook in (has the extended battery) and I am able to put the netbook in a neoprene sleeve and then into the messenger bag and it fits. So I bought another one for the gtab figuring it should work for that as well. If it doesn't I'll be really surprised but won't be out much money at all.
Hope this helps.
newbsauce said:
Just received my Skinomi carbon fiber skin. Was very impressed with the material, looks to be the same 3M stuff that "dash kits" use in cars. 24 shipped on amazon. I've heard it sucks to install - but my tab won't be here until Thursday to find out
Click to expand...
Click to collapse
I have the same problem. Waiting for mine to come in on thursday as well.
Metal_in_Silk said:
I can't answer that yet because FedEx still has my gtab
But. I have one that looks exactly like this one that I keep my 10.1" acer aspire one netbook in (has the extended battery) and I am able to put the netbook in a neoprene sleeve and then into the messenger bag and it fits. So I bought another one for the gtab figuring it should work for that as well. If it doesn't I'll be really surprised but won't be out much money at all.
Hope this helps.
Click to expand...
Click to collapse
Gotcha. I'll give it a shot. Thanks again.
I picked this up and it looks great:
http://www.amazon.com/Acer-AOD250-1...?s=electronics&ie=UTF8&qid=1299249594&sr=1-22
Very professional looking and holds the accessories fairly well. There is only the one outside pocket, so things just get thrown in. For under $20 (with amazon prime), who can complain?
I have a Wenger Swiss Army 12" laptop bag that I used for my netbook. Got it at Walmart for under $15. it too has removable strap and a side pocket too.
Anyone checked out this bad boy from belkin? At a whopping $8 it seems like quite the bargain.
http://www.amazon.com/Belkin-F8N132...ref=sr_1_2?s=pc&ie=UTF8&qid=1301425221&sr=1-2
newbsauce said:
Anyone checked out this bad boy from belkin? At a whopping $8 it seems like quite the bargain.
http://www.amazon.com/Belkin-F8N132...ref=sr_1_2?s=pc&ie=UTF8&qid=1301425221&sr=1-2
Click to expand...
Click to collapse
Belkin is usually a good product. But here's what I use (in neoprene), just bought another two pack in fact:
http://www.meritline.com/flap-laptop-sleeve-neoprene-black---p-36331.aspx
Velcro flap closure, perfectly servicable and I've always been happy with them. Free shipping too, but you have to be sure to select that option. It does take a some time to deliver due to the fact that it ships from China. Also, these are a bit roomier than the usual stretch-to-fit neoprene sleeve. My netbook won't fit in that kind due to the extended battery.
What can I say, we wimmins love a sale ;->
I plan to wait to get my hands on the tablet (fedex will get it here on Thurs) ... play with it long enough to be certain I want to keep it ... and THEN ... shop for stuff. Else, getting rid of the tablet and all those accessories will be an humbling experience.
BTW, my CC. has a program where they will take back a product if the store does not accept it back. I hope I don't resort to it in this case.
I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Thanks!
-J
CLIP
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
sjmoreno said:
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
Click to expand...
Click to collapse
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I think I read on his last email that he's got 120 CLIP cases coming in the next shipment.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Yeah, I heard that too about the magnets on the M1.
I am very happy with my CLIP case. In my opinion it is the only Apple quality accessory we have for the gTab at the moment. It's well worth the extra cash and I can't recommend it any better.
Thanks SJ! Exactly what I'm looking for. Appreciate the pic.
-J
StingRay_ said:
sj
...another forum thread said that magnets in that case cause the screen to freak out...
Click to expand...
Click to collapse
I tried moving a small (1/4" diameter x 1/8" thick disk) rare earth magnet near the screen of my GTab, and didn't see any effects. Has anyone else tried any experiments? How large is the magnet in the case?
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
ZebTheCalvinist said:
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
Click to expand...
Click to collapse
available now both black and white on AliExpress for $58 shipped, if you would rather spend the time waiting for it in transit from Asia rather than waiting for it to get restocked @ Steve.
Check the thread here.
insight76 said:
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
Click to expand...
Click to collapse
No. I looked into this a few weeks ago (don't remember where I posted that) and the Xoom and gTabs are different sizes. If I remember correctly the gTab was bigger/longer than the Xoom.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
As an M1 owner who's used it for a couple of weeks now, I can tell you that the magnet issue, like most things on the Internet, is blown way out of proportion. I use the tablet daily at work, have used it shopping for replacement flooring/furniture for our flooded gameroom, and sitting on the reclining sofa playing Angry Birds. I've never had a problem with the magnets reducing screen responsiveness or "freaking out". My only complaint is that over time, the GTab tends to settle further down in the case, half-hiding the camera and all but covering the ambient light sensor. If you don't plan on propping it up on a desk as often as I do, it makes a wonderful case.
M1 Case and G Tab Screen
I got an M1 case on Monday so I've had it for 3 days now. The fit, feel and look of the case are all excellent so far on mine, however, the it does mess with the screen. The longer it stays in the case the worse it gets. I have done tests in and out of the case, putting to sleep or not, rebooting or not and now have no doubt it is the case but I am not sure if its actually the magnets or not. It could just be the case itself touching the edges of the screen all day. In any case, (some pun intended) the longer it stays in the case, the harder you have to press the outside portions of the screen to get it to react. Mine eventually gets to the point where you cannot press hard enough to get the keys on the keyboard to function. When this happens I put it to sleep, pull it out of the case, wake it up and it works like new again. I will probably be investing in a black clip myself in the near future. This could just be a problem with my particular Gtab and it may not effect others at all but that is my short bit of experience with the M1 Case.
There's a few black clip cases in stock at it2steve's web store now.
WI Global Technology Case for GTablet - $16, delv'd
miatawnt2b said:
I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Click to expand...
Click to collapse
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
and before anyone asks...
yes, those are LED indicators by the back/menu/home/search buttons.
It's a custom mod which can be seen here
slsmag said:
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
Click to expand...
Click to collapse
It's WIT Global. I just ordered one for me. $15.99 shipped. It's coming from Hong Kong, so I wonder how long it will take.
merdely said:
It's coming from Hong Kong, so I wonder how long it will take.
Click to expand...
Click to collapse
Mine arrived in just about 2 weeks.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Hmmm been using the M1 for a few weeks now. Never noticed this magnet issue. I know magnets can mess with hard drives but never heard of it messing with an LCD. Doesn't the ipad 2 smart cover have like 70 magnets?
EDIT: Looked it up, 31 magnets.