[Q] I know it's been said before....bricked.. - Streak 5 Android Development

Yes, I know...it's been posted many times before but I still haven't read a thread with my particular problems. Ok, so here goes....I have a locked Rogers Streak that I tried to flash to DJ_Steve's 1.4.6 using the sticky, but of course it didn't go so well so I ended up stuck at the Dell logo.
Next I tried a bunch of recovery img's via Fast_boot, but still no luck. So the current situation is that I can get to the recovery menu and I can Fast_boot:
1) I've Fast_boot'ed to Clockwork img, but when I choose option 2, I get a black screen.
2) I've Fast_boot'ed to 309 img, and tried to just straight update to official Dell 2.2 Streak_315_12332_00.pkg, but I get an error saying that it can't mount the SD card.
3) I've tried this fix as well: http://weethomas.wordpress.com/ And that did flash, I was stuck at the Dell log and when I try to flash the recovery img again, it does not flash option 2 in the recovery menu even after a factory reset.
4) I'm a little bit tired and a little bit drunk right now and I do not usually post anything at all (as you can tell from my stats, but I've been a member since the Atom Exec days and can search the posts ), I am kinda stuck right now so a little guidence would be great.
Thank you all!

Just flash the stock A1.6 and than 2.2. If this works, please leave xda devs cause it looks like you donĀ“t know what to do and opens threats we have enough of them

Related

[Q] Unable to roll back to 1.6 ROM on UK/O2 Streak (21) - is it possible?

Has anybody with a UK/O2 Streak (21) been able to roll back from the stock 2.1 (installed successfully) update to stock 1.6?
I have searched xda and modaco for days and have tried everything but I always get stuck at the same spot.
I am able to flash stock recovery but when I use option 2 to apply update.pkg from my sd card, it gets stuck about 1/4 of the way and says "Software is up to date. System will reboot in 30 seconds." And then when it reboots, it's still at 2.1.
I have also tried using clockworkmod recovery (several versions), which only seems to work immediately after I flash it (sometimes clockwork menu won't show up and it reverts back to stock recovery - are they being flashed to different partitions or something?). Using clockwork, I tried to apply update.pkg and when that didn't work I tried update.zip. Both get stuck on black screen.
I have tried using ROM Manager too, but that never works. It says it will reboot into recovery but ends up just rebooting normally back into 2.1.
I tried stock and custom 1.6 ROMs with no success.
Is there a way to force the system to apply the update.pkg even if it thinks it is already up to date?
Any help would be greatly appreciated. I have been pulling my hair out over this for days. Thanks in advance.
I am having the same exact issue as described above. "Software is up to date."
And then the device just reboots into 2.1 and starts the cycle of endless reboots.
Anyone got a solution for this?
Please help.
The guides in the stickeys do work I have gone from 21 back to 16 and back to 21 about 6 times
Sent from my Dell Streak using XDA App
Yeah but all the methods in the stickies need the use of a PC. I am on a Mac. Is there a way to use fastboot on a mac? Or a way where I can just copy the update.pkg on my sd card and use that directly?
When I use the SD card method, 1.6 refuses to install saying that the "Software is up to date."
Thats what I need help with.
Try this page
http://android.modaco.com/content/d...1-6-downloads-how-tos-rom-superboot-recovery/
It lists mac commands to load the recovery image to your phone.
MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-mac.sh' followed by './install-recovery-mac.sh'
Yeah I tried those commands but I get a "No such file or directory" message in Terminal. I have read a lot of threads here and over at Modaco but can not make head or tail of the issue or what to do.
I have a O2 Streak that I had put 2.1 from O2's official release using the Recovery mode and putting update.pkg on SD card. After that I have been having a ton of issues with constant reboots and sometimes getting stuck on Dell logo.
I wanted to go back to stock 1.6 and have been unable to do so. What are my options right now and how can I fix this? I would prefer to keep 2.1 but don't mind going back to 1.6 if that will be more stable.
stability
Sorry if i am incorrect about this.
As far as i can tell you want to stay with offical roms due to warranty.
I have heard that if you go back to 1.6 even though official, dell wont cover the warranty.
If you are not worried about try :-
The leaked 2.1 rom. I hear it is more stable than 02's 2.1 rom.
Or even go for stephen Hydes brilliant 2.2 roms.
I don't care about official or unofficial. I'll try loading one of the other roms. MY issues have been with getting the rom on the device though. Lets see.

[Q] Help with installing Clockwork Mod on stock Fascinate

So Ive spent the last 3 hours trying to get Clockwork mod loaded on my stock, rooted Fascinate and I think all Ive done is manage to completely confuse myself more than I thought possible.
I should start off by saying Im a complete newbie at all of this and seeing things like "clockwork red vs green vs blue" doesnt really mean a whole lot to me.
I started off by trying to follow this thread in hopes of getting Froyo loaded. I was fine up through the "Installing Clockwork Mod" section. I was at first confused by the files that were mentioned as it seems as though the packages he refers to have since changed.
So what Ive tried thus far is booting into Download mode, loading ODIN chose the cwm-recovery-ALL.tar from here with the PDA button and hit start all seemed to go well.
My problems started occuring when I installed ROM manager and tried to backup the current ROM. When it booted into recovery mode, I got an error about failing "to verify whole-file signature".
I tried just continuing on in the tutorial and loaded the EB01 Froyo modem via ODIN, but still couldnt get to the point of loading the new custom rom as it gave the same error about the update.zip. Im hoping I didnt screw things up further by doing this.
Ive searched around and read I dont know how many forum threads since across a number of Android forums. Some saying you dont need the update.zip on the SD card, some saying you do. Ive also read some posts saying my phone should have booted into Clockwork "red" and I dont think Ive been able to do that yet. I think its only booting into blue (are these colors just referring to the text color?)
Ive since wiped my phone and tried again and still have had zero luck. Ive tried a couple other things including trying to the update.zip (which I assume is the "cwm-recovery-ALL.zip" that should be used?), but when I choose to apply the update.zip it now comes up with an icon that has the android robot with a yellow triangle with an exclamation mark in it.
Sooo frustrated at this point and any help would be greatly appreciated!!
ROM manager is incompatible with CWM and our phones currently. Everything you did up to installing it appeared right however.
Sent from my SCH-I500 using XDA Premium App
Ok, so what should be the next steps I take here? How does one backup the existing ROM (so I can revert back in case something goes wrong) and also load the new ROM without ROM manager?
Thanks again.
Use Odin to flash the recovery-All.tar file and then boot up your fascinate and after it boots turn it off again. Once it is off hold down both the volume up and volume down button at the same time. While you are holding those press and hold the power button and do not let go of the power button until you see the Samsung logo. When you see the Samsung logo let go of the power button first then let go of the volumes. At that point you should boot into Red CWM recovery. Try it and let me know how it goes.
Sent from my SCH-I500 using XDA Premium App

[Q] need help with my white dell strek upgrade..

okay, i don't know if this is the right place to post this, but i have ran out of options.. i have searched and searched and still no luck.
so i have a white streak and been tryng to upgrade it to 2.1 or 2.2. followed all different guides, loaded the stock revocery img for 1.6 o2, when i try to flas hthe o2 img to o2 1.6, the process goes to about 20-40% it restarts itself and nothing happens, still back to 1.6.
okay, so i guess let's try the clockwork method, 1st time i used the 1.8.1.7 clockwork, with SteakDroid 1.9.0, it also installs half way and get a error message 7, it restarts, nothing happen..
then i tried using ClockworkMod Recovery v2.5.0.1, all i get is bllank screen, (for both different img file)
so i'm thinkin, maybe i need to root the phone 1st? so i flash it with superboot, tried 2 different version, one version got me stuck on dell logo, and the other version got me nothing but keep on restarting the dell logo. now my phone wont start at all.
i guess, okay, let me give the QDL tool a try, still doesnt work.. i get:
Run HEX success
ERROR[D14]: Streaming hello Failed!
ERROR: Download fail!
Please remove the battery and try again.
over and over again..
now my streak wont even startup, any one please help!?
legendwireless said:
okay, i don't know if this is the right place to post this, but i have ran out of options.. i have searched and searched and still no luck.
so i have a white streak and been tryng to upgrade it to 2.1 or 2.2. followed all different guides, loaded the stock revocery img for 1.6 o2, when i try to flas hthe o2 img to o2 1.6, the process goes to about 20-40% it restarts itself and nothing happens, still back to 1.6.
okay, so i guess let's try the clockwork method, 1st time i used the 1.8.1.7 clockwork, with SteakDroid 1.9.0, it also installs half way and get a error message 7, it restarts, nothing happen..
then i tried using ClockworkMod Recovery v2.5.0.1, all i get is bllank screen, (for both different img file)
so i'm thinkin, maybe i need to root the phone 1st? so i flash it with superboot, tried 2 different version, one version got me stuck on dell logo, and the other version got me nothing but keep on restarting the dell logo. now my phone wont start at all.
i guess, okay, let me give the QDL tool a try, still doesnt work.. i get:
Run HEX success
ERROR[D14]: Streaming hello Failed!
ERROR: Download fail!
Please remove the battery and try again.
over and over again..
now my streak wont even startup, any one please help!?
Click to expand...
Click to collapse
I just got a white dell streak on ATT too and muddled through these forums trying to figure out how to get 2.2 on it (waited several days and no over the air update)
I am now running streakmod 1.9 and i think it is all good. I'll give you quick run down of what i did to get to official ATT 2.2
1. Download the official ATT update.pkg from the Dell Streak Wiki...
http://mobileupdate.dell.com/PackageProductionLocations/Streak_340_14844_31.pkg
2. Place the file on the root of your sd card. Since your phone is messed up, you can just take your sd card out and load it via computer.
3. put sd card back in your phone. now turn phone back on while holding down both volume up and down buttons and power button at same time. you should come to a screen with four options. pick option 2. The update package should run and when its done, your phone will be on the official 2.2
If you want instructions after that on how to get root and custom rom on your phone let me know. That is easy too, but it took alot of messing up on my part to find the right method. Some people think it is as clear as day, but i agree the info in these forums is a little fragmented.
Good luck!
thanks for the info, now is saying FOTA name mismatch, device will restart in 30 seconds, which recovery img did you use to flash this?
i used the dell recovery. i apologize, i believe i left out a step. you n
You need to go back to stock Dell recovery. Wiki page here:
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak
File link here: http://mirror2.streakdroid.com/manii/340/recovery.img
do you know how to flash recovery from fastboot?
Once you flash that stock recovery, you need to follow the instructions. believe it should work after that.
is urs locked to ATT or unlocked? I have a white factory unlocked streak and I was able to upgrade to 2.2.2 with no problem...
im not sure if it being unlocked or not makes a difference but maybe it could.. when I get to my laptop, ill post wat I did and u can see if that works
but I can tell u I was on 305 rooted n I used QDL tool just to make sure everything was factory 305.. then downloaded the 345 AWS rom pkg from the dell wiki, renamed to Update.pkg n flashed using stock recovery n got no problems, then followed steps in the general sections to get root..
ill post the links n everything when I get home
Sent from my Dell Streak using XDA Premium App
ducehlmg said:
is urs locked to ATT or unlocked? I have a white factory unlocked streak and I was able to upgrade to 2.2.2 with no problem...
im not sure if it being unlocked or not makes a difference but maybe it could.. when I get to my laptop, ill post wat I did and u can see if that works
but I can tell u I was on 305 rooted n I used QDL tool just to make sure everything was factory 305.. then downloaded the 345 AWS rom pkg from the dell wiki, renamed to Update.pkg n flashed using stock recovery n got no problems, then followed steps in the general sections to get root..
ill post the links n everything when I get home
Sent from my Dell Streak using XDA Premium App
Click to expand...
Click to collapse
Good point.
I didn't know they sold white unlocked streaks. Mine is ATT. If legend is using different than ATT, your probably a better help.
Everytime i get a new phone, i say i'm going to just stick with the stock software. somehow still, i always end up over at XDA complicating my life. Oh well... Thank you android...
QDL Tool
http://streakdroid.com/?page_id=15&did=8
345 AWS
http://mirror2.streakdroid.com/manii/Streak_345_15380_00.pkg
1 Turn phone off. Open qdl tool and hold VOL UP while connecting phone via usb. If you have the right drivers, qdl should recognize it. Hit RUN to flash everything and get back to a stock 305 rom.
2 Rename the 345 pkg to UPDATE.PKG and copy to ur sd card. Hold VOL UP + DOWN while turning phone on to get to recovery. Choose option 2 to flash the update.pkg. Let it run and just wait until the phone boots completely up. You will be at a stock Android 2.2.2.
If you want to root, follow the steps here...
How to root 345 rom
http://forum.xda-developers.com/showpost.php?p=12175682&postcount=72
my was a locked att version. but any how, i ended up going to best buy and did an exchange, since i got it couple days ago. then i used mongofrye's link to the 2.2 pkg file, with out flashing the recovery, just put the pkg in sdcard and upgraded it using the stock recovery img. worked in 15 mins, not i'm on 2.2! thanks for all the help guys, this thread will surely be a good reference for future flashing. cheers!

I need urgent help, did i brick my phone

ok so yesterday i rooted my telus fascinate and i was going to isntall the MIUI rom. Following a guides instructions i installed rom manager and did a clockwork mod recovery, i then put the rom on my root file of my sd card and tried to install it through the "install rom from sd card option" on the app. Problem was i only got into the stock recovery mode and not the clockwork one it aslo gave me signature failures. I then followed the guide of this video:
http://http://www.youtube.com/watch?v=Q7xV0yE9ZcA
when i installed the kernel everything went fine but then after i got into CW recovery and installed the rom my phone booted and it just kept repeating the normal splash screen (it said galaxy I9000 instead) followed by a screen that said something like cryogenic mod. I got freaked out from here and tried to install stock kernels to get my phone running. As of right now my phone will boot but only stay on the splash screen. I can not access recovery mode. I really need some help, thanks.
these are some of the files i used:
the rom i used,
http://http://forum.xda-developers.com/showthread.php?t=1150045
the kernel i used,
http://http://forum.xda-developers.com/showthread.php?t=822756
thanks
the links are broken. Did you install a rom / kernal specifically for the telus fascinate?
i believe it could have been for the galaxy I9000,
ill try to fix the links btw
update*
i managed to get it into clockwork recovery mode by holding the dam buttons for a solid 5 minutes, after doing this i pressed factory reset, now my phone is stuck saying:
-- wiping data...
Formatting DATA
0_0' im not having a great day
http://forum.xda-developers.com/showthread.php?t=1227807Until I know what version miui and kernal you are trying to flash, it's hard to help. It definately sounds like your phone is soft bricked tho.
Edit* Here are some links you should read up on.
http://forum.xda-developers.com/showthread.php?t=923712
http://forum.xda-developers.com/showthread.php?t=1227807
try to type this inot your browser:
http://forum.xda-developers.com/showthread.php?t=1150045
aswell as this:
http://forum.xda-developers.com/showthread.php?t=822756
it takes a little longer but i cant fix the links sorry.
So as of now i got i managed to wipe all of the data on my phone and i am in recovery mode, if i click reboot it does the same thing and stays on the boot screen. If i click the mod from the sd card it flashes from the normal model number screen to one saying cryogen mod. It then keeps going back and forth with a flash of a screen that has a bunch of commands on it for about 2 seconds
brodydj said:
try to type this inot your browser:
http://forum.xda-developers.com/showthread.php?t=1150045
aswell as this:
http://forum.xda-developers.com/showthread.php?t=822756
it takes a little longer but i cant fix the links sorry.
So as of now i got i managed to wipe all of the data on my phone and i am in recovery mode, if i click reboot it does the same thing and stays on the boot screen. If i click the mod from the sd card it flashes from the normal model number screen to one saying cryogen mod. It then keeps going back and forth with a flash of a screen that has a bunch of commands on it for about 2 seconds
Click to expand...
Click to collapse
The rom you are trying to flash is for a i500 fascinate. I suggest taking the time to do alot of research before you turn the phone into an expensive paperweight. Read this link!!
http://forum.xda-developers.com/showthread.php?t=921285
K well i ran that rom and it works now but he only problem is i dont have any cell service, do you know how to fix that. I know that you are probably laughing at my mild retardism at this subject but i am a big noob. As for what you said in your previous reply is their an MIUI version for the fascinate from telus because i basically rooted my phone so i could get this rom.
thanks
Update*
i followed the instructions on the link you posted and chose the rom for MIUI I9000 as the one i was going to install but when i istall zip from sd it only says installed correctly and then when i reboot it keeps changing from the sgh-t959d to the galaxy s cyanogen screen
yea your boot looped now. I would run the rom that worked just install the compatible radio and kernal for it and you should get cell service back.
ok thanks i got all my cell service back and i got the MIUI rom to work. Now to just ry to remember all the apps i had
Your welcome...glad you got everything working!

[Q] Dell Streak 5 constantly rebooting with flashing lights

Hello. I'm a 55 year-old newbie to the wonderful world of Android, courtesy of my kid's continuously-rebooting Dell Streak 5 (AT&T, USA). It all started with the Froyo 2.2 OTA update in late 2011. The Streak would not boot after that update completed (WiFi - FIOS). We called Dell, and they advised that we Factory Reset it. That worked, and we thought all was well. Now several months later and 2000 factory resets later, my kid requested an iPhone for Christmas, and I re-claimed the Streak. I called Dell last week, and of course they wasted several hours of my time, ultimately telling me that my phone was out of warranty, but that for $249 I could buy a new phone. I advised several reps and a supervisor that Dell's OTA 2.2 update caused the problem, and that I should not be charged for any resolution to that problem. End of that story - here I am, after spending all of Saturday and most of Sunday attempting to downgrade back to 1.6. Here's what I have done:
I used SuperOneClick and successfully rooted the phone
I have used many recovery mods, ALL of which seem to lead to a black screen after selecting option 2. However, the Clockworkmod "alternate" recovery method did work. I downloaded a 4399 stock recovery zipped file, copied it to the Streak's SD card, then renamed the entire zipped file to "Update.zip". Then I used FastBoot, and flashed the Clockworkmod alternate recovery "recovery.alt.img" to the Streak. I used fastboot to reboot the Streak, then held the two Volume buttons, selected Option 2, and made my way through the awkward menu - but ultimately I was able to install "Update.zip" successfully. Upon the reboot, I am stuck with the Dell logo. I have tried factory resetting at this point, starting again from "scratch", only to return to the same old story: stuck at Dell logo. I read somewhere that it could take 10 minutes for the Streak to boot, but I have waited for 30 minutes plus.
An hour ago I was too frustrated to continue trying to downgrade to 1.6, so I read this thread: http://forum.xda-developers.com/showthread.php?t=1334487. I used the clockwork 3.0.1.9 recovery method, and attempted to upgrade to 2.3.?. This was not an "alternate" method (which had not worked in two days), but after flashing the recovery.img to the Streak, and using the 2.3.? "Update.pkg" on the SD card, the Streak did begin to verify the package - then it started the update, then - REBOOT. The first time this happened, I waited for 30 minutes, thinking that the upgrade was happening in the background while displaying the Dell logo, as Windows updates sometimes do. But then I yanked the battery, and started that process again. The next time and every subsequent attempt to perform this upgrade results in a reboot as the "verifying package" is occurring.
At this point I feel as though I am spinning my wheels, so I'm putting out an All Points Bulletin for some advice and/or help.
Thanks in advance! John in Dallas
John, have you tried with another update.pkg? The thread you link to is from sreak 7, could that be the issue? If I was you I would try one of the 407 deodexed ROMS from http://forum.xda-developers.com/showthread.php?t=1376896
I did not realize that thread was for the Streak 7. Thanks for pointing that out. I have tried several others, but nothing like what you have provided.
Being new to this technology, I have not yet quite grasped all the terminology and theory. Can I mix and match the recovery images with the Update packages? For example, where "TheManii" states that StreakMod must be pre-installed, then he provides a (407) base_v1.zip , is it OK for me to use the Clockworkmod recovery.alt.img (which has seemingly worked well on my Streak) with his base_v1.zip? Or MUST I use the StreakMod recovery image in conjunction with his base_v1.zip?
I assume that I am supposed to follow the same procedure as before:
- Save the base_v1.zip to the Streak's SD card - renamed to "Update.zip"
- use "fastboot mode" to transfer the recovery.img from PC to the Streak
- boot the Streak into recovery mode, select option 2
- then select the recovery option to load from the "Update.zip" on the SD
How long should it take to install the base and the update?
I understand that the "base" is just that, and I will also need to flash the "update", but the other "bloat" stuff is optional.
I will give this a try shortly - then re-post. Thank you!
I am not the expert here, but from what I've gathered you need the correct recovery image only when you are flashing an official update, since those updates come as encrypted ".pkg" files. I think (please check also the threads on flashing modified ROMs) that ROMs that end on ".zip" are not encrypted and don't need a special recovery file. I hope someone with actual experience on this can confirm if I am correct.
Edit: I just notice that the thread I linked to specifies that installing the matching "pkg" is a prerequisite to installing the "zip" -- this is admittedly more complex than I thought it would be. You are probably better off just installing one of the stock ROMs first just to recover your Streak -- I had recently updated to the 407 (Korean) Gingerbread ROM and like it very much; there are instructions of puttiing it here: http://forum.xda-developers.com/showthread.php?t=1416718
John,
To flash a stock ROM you need a stock recovery.
To flash a custom ROM you need StreakMod Recovery.
Even if the files are not altered any ROM packaged as a zip is a "custom" rom.
To get you started (and get your Streak working) you should flash a stock ROM. I recommend BB 351 as the most stable stock ROM.
Put the pkg file for 351 on the root of your SD card named update.pkg
Use fastboot to flash the 351 recovery,
Use fastboot reboot to reboot the Streak and as it reboots hold both volume buttons to get to recovery
Select option 2 to install 351.
If you decide to use a different stock ROM the instructions are the same, just use the correct files.
If you really want Gingerbread then flash the latest stock GB ROM and then install the DSC version of GB. See the DSC thread in the development section for info.
I've been looking for a downloadable "BB 351" since you posted - cannot locate it. I found the base 351 zipped file, but not the "pkg". Any hints?
Also, when I first attempted that "407 - base_v1.zip" installation, I used clockworkmod, named the base_v1.zip to "Update.zip", and it worked to a small degree. After confirming that the installation was successful, I rebooted the Streak, and after 3 minutes I saw a "O" logo with "elloh" beneath it. Unfortunately it never entered into a "home page" - but rather the Streak reverted to the Dell logo, and that was that.
You might try the links in my signature to find what you need - the wiki is a good place to start.
Edit: the reason you had no success with the zip you flashed is because a ROM flashed from a zip is incomplete. That is why you need to flash the stock rom it is based on first. The ROMs packaged as zips do not install some needed system files, that is why you see instructions to install those first.
You have more reading to do before you understand the process of updating/modding the Streak.
I did locate the BB 351 package just seconds after posting that I could not find it. I've now bookmarked it. I continue to have not-so-good luck.
On the "407" Base_v1.zip installation, suggested by the first poster, the installation went further than any other attempt. I actually saw the "O" with "olleh" beneath it onscreen for a few minutes, but then, poof, it was gone - replaced by the Dell logo. If I am successful, will the Dell logo still be displayed, or will the "O" or some other logo replace the Dell logo upon a successful installation?
After downloading the 351 package and corresponding recovery.img, I reached one point where the status indicator bar reached 100%, but then everything apparently froze. Rather than panic and quickly yank the battery, I left it alone for 15 more minutes. There was no change, so I removed the battery and started again. Now, after many more attempts, I see the "Verifying Update", and then the Streak reboots. Each time I leave it for several minutes in hope that it is installing the Update in the background. But nothing happens. Just reboot after reboot - with Dell logo.
I know that I am very close, so I am not giving up. But I am worn out - PLUS the Super Bowl is starting right now. I'll pick this up again tomorrow night.
If anyone has any ideas or suggestions, please post - remembering that I'm a newbie and may not understand your technical slang, although I am a Telecom Engineer now working exclusively with VoIP, so I am technical. It's been fun tinkering so far, but it would be nice to reach a happy ending! Cheers.
John - North Texas
Thanks for that tip, Marvin02. I do understand. Applying the base was step 1. I did not perform step 2: applying the update. Without the update, the base could not "launch". Unfortunately today I have returned to the wonderful world of IP Telephony, Gateways, UC, and Linux. At this moment I have no battery for the Streak, as I gave it to my daughter during the Christmas break. Yesterday I was using my son's battery, but he returned to college yesterday evening. I ordered a battery last Thursday, and it is due to arrive today. I was shocked to discover that the Streak cannot power on with only external power - it requires a battery.
I also know that I have merely scratched the surface of this technology. After I recover this Streak, I plan to install a ROM Manager, perform a backup, then experiment with other mods. But right now the mission is to revive the Streak paperweight.
Thanks!
ROM Manager and similar apps don't play well with the Streak. Don't use them.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
When you tried to install BB 407 you were installing a gingerbread ROM.
BB351 is a Froyo ROM. There have been some reports of problems reverting from GB to Froyo.
I suggest that you use fastboot to flash:
The recovery for BB 351 or BB 360
amss.mbn
dsp1.mb1
Then reboot to recovery and try installing the update.pkg.
For some reason some Streaks need the baseband files flashed first before the Froyo ROM will install properly. This happened with my Streak when reverting from GB.
blackscreen after selecting option 2
When i select option 2 from the recovery screen it is just a black screen. is there a way to fix this?
upgrade to Longthorn 2.6 is the most one I like
I flash the ROM to Longthorn 2.6. Strictly follow up the step.
My Dell Streak 5 now faster than before, no Dell Stage respone error anymore.
flashing light also resolved (read the instruction in [ROM] Longthorn 2.6 topic.)

Categories

Resources