hi XDA
I am having some strange behaviour with my USB OTG...
- charges OK
- connect USB OTG cable: phone says "USB host cable connected"
- connect a memory card reader: nothing (used to work previously though)
- connect a mouse: nothing (used to work previously though)
- plug into official Samsung car dock: car dock enabled, but only one stereo channel working (right channel)
- plug into PC: Windows says "unrecognized device"
..... SO
I was thinking: something wrong with my hardware
so I ordered a new USB hardware module on ebay
and I successfully fitted it
...however
...still no change ???
looks like it wasnt a hardware problem after all
USB debugging on or off: no difference
Anyone got the same or similar issues? OTG is a really useful feature for me so I hope I can fix this
Try plugging the card reader or whatever into the OTG cable, then plugging the other end of the OTG cable into the SGS2. That seems to give a much more reliable connection in my experience.
3waygeek said:
Try plugging the card reader or whatever into the OTG cable, then plugging the other end of the OTG cable into the SGS2. That seems to give a much more reliable connection in my experience.
Click to expand...
Click to collapse
It is not the first time I am trying OTG. This summer I was travelling and posted >100 pictures to my blog. The correct order was: cable first, then memory card reader WITH memory card already inserted... in desperate attempts I tried several other combinations but without luck.
Hi everyone,
and thanks in advance for any help / advice that you may have for me.
I'll start off with my question, before I unload all of my information. I simply would like to know exactly what type of USB Connection the Sony Tablet has, and therefore, what specific USB Cable I need to buy in order to connect it to my PC running Vista.
I bought a Sony Tablet and have been surprised the lack of information in regards to the USB connectivity of the device. Specifically, the exact 'cable type' required to connect the device to a PC. Everywhere I have read so far, it simply says USB Micro, or USB 2.0 micro. But when I try use the micro USB cable that I currently use with my Xperia Play phone (which works fine for PC transfer with the phone) it's doesn't work at all with the Sony Tablet. It doesn't even register on the PC when I plug the cable into the tablet. Just nothing.
Since then, I have read a lot about USB, and found that there are different types, like 'Mini USB' versus 'Micro USB'. Apparently there is also Micro USB 'A' and Micro USB 'B'. And finally, apparently there is 4 pin micro usb and 5 pin micro usb type.
hope this all makes sense, many thanks guys.
Austab.
This tablet uses micro USB, I'm pretty sure the cable for your Xperia should work fine with the tablet. Perhaps you plugged it in upside down?
Thanks for the reply, I agree with your thought train. If it works with the Xperia, then surely it should work with tablet. I'll try it again after work today, and confirm. Is it actually possible to plug the cable in the wrong way around?
I'll kick myself if I did! Thanks again, cheers.
Austab.
It cannot be plugged in upside down, unless you use extreme force and break it.
***
But yeah, this cable *should work, if it works with your Xperia Play. In principle there is only one kind of micro-USB cable (well, actually it could have either regular type A *OR micro type A connector at one end, but let's keep it simple. Mini-USB is a different kind and A and B are just connector types.
See this picture with different USB connectors:
http://en.wikipedia.org/wiki/File:Types-usb_new.svg
Your cable should have a regular USB A connector (the one on the top left) at one end and micro-USB B connector at the other end (the one on the bottom right).
Yeah, it should work; I'm using the same USB cable that I use with my Xperia Arc.
For what it's worth, I've been having issues too. Mostly windows fails to find the drivers and install them. I've talked to multiple Sony reps and have tried multiple computers but haven't had any luck. Maybe it's a bad cable but I have had Windows detect the device...just unable to install the plug-n-play drivers.
Systems I've tried it on:
Custom built - Windows 7 with Service Pack 1
Dell - Windows XP Service Pack 3
Sony Vaio Laptop - Windows XP Service Pack 3
I had the same problem on both of tablet P and tablet S. I can tell you, its more about luck than the wrong cable type! At the end, it just works after retrying a few plugs and unplugs.
Hope they can get a fix for this soon.
Hey again guys, I've now tried the cable again with my Sony Tablet, and I'm definitely plugging it in correctly. There's no response whatsoever on the tablet or the PC once I've plugged the cable in.
When using the same cable on my Xperia play, the phone will instantly start charging once I plug the cable in to the PC. However, the PC doesn't actually recognize the phone as a device (i.e. it doesn't show up in windows explorer, or launch the Ericsson Phone Software, as it once did). It charges the phone, but doesn't talk to it, if that makes sense.
So it would seem that some Micro USB cables are good for charging only, but not for data transfer / PC recognition.
I'll buy a different cable tomorrow so will let you know if it works then.
Thanks again for all the replies guys I appreciate it.
cheers again,
Austab
Looks like the cable is faulty then and you have to try another one.
I bet one of data wires is broken, or a data contact inside connector is broken (worn down), because when you connect your Xperia Play it should also be recognized as a device.
Then again, maybe there is something wrong with your computer.
Can you try the same cable on another computer, and see if the device is recognized, before you buy a new cable. Or let them check the cable at the store to see if it really is faulty.
My understanding is you need an OTG USB cable, (On The Go) - this is what you need to connect USB keys and other hard-drives and so therefore I would think external PCs too.
I bought a nokia one for around 5 pounds from amazon, do a search for OTG USB cables,
thanks
Pratish
He wants to connect it to a computer, not connect external devices to it.
So he needs a regular micro-USB cable.
the cable is USB Host finde with this name
People, wtf are you talking?!
He *does not* need USB host (OTG) cable. That's for connecting USB devices, like keyboard, mouse, USB-storage etc., to your tablet.
He wants to connect his tablet to a computer. For that he needs a regular type A USB to type B micro-USB cable.
Hi,
Would seem like op had a charging cable, not data one. As stated, he need a regular data cable with appropriate connectors. OTG has nothing to do with it.
Sent from my HTC Desire using XDA App
Hi Crazzzik,
so you're saying that there are micro usb cables for charging only, and then there are micro usb cables for data + charging etc? That would explain things perfectly for me, as my cable seems to work for charging devices, but not communicating with a PC (i.e. data transfer).
I'm getting a new cable today - sorted!
Many thanks everyone for your help & advice
Austab
Yes when I got the cable for my sony tablet s, I saw several usb cables that would fit the tablet, but on the package it said specifically "for charging only, not meant for data transfer", so they do make the cabkes just for charging, as a PC tech, I was a little embarrassed that I just found this out this weekend.
Thanks
I also got a microUSB-cable adapter, it works fine with usb driver / joypad and keyboard
but not sure if it's capable for connecting with PC or even for charging
hello all,
I recently bought the usb cable for the tablet they sell at the sony store. The micro usb to female normal usb ( I think you know what im talking about). It is sony tablet specific. The micro usb end of the cable is square instead of tappered at one side. it worked fantastic for plugging in and usb deviced to the tablet, but when I tried to plug it into my galaxy s, it wouldn't fit. just thought those thinking of buying one would appreciate the heads up so its not a shock if they try to use it on any other devices. Im sure you can find that same cable at any well stocked computer shop.
i borrowed a htc wildfire s cable, this works and installs drivers.
Today, a friend asked if I had an extra laptop. He needed one for his 10 year old son.
While rummaging through my closet (you know, the one with all the old computers, shotguns, and half empty Jack Daniels bottles) when I found one of these.
Two Pics … http://db.tt/GY4wfof6 and http://db.tt/rzkodoMi
Now, I have no idea as to how, where or when I got this. I had to search the net to even know what it was.
Ebay link … http://www.ebay.com/itm/230328510631?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2648
Continuing my search of the closet I also found a 2.5 inch 160 gig IDE hard drive. Assembled the two and I now have a portable battery powered drive that works great with my Flyer.
That looks kinda old school. =)
So you connect to the flyer via bluetooth or microUSB?
It connects with microUSB.
Now that I’ve had a chance to use it a while I’ve found I can set its switch to PC or DC.
When set to PC I just plug it in to my Flyer and can copy files both ways.
When set to DC it will function as a standalone unit (because it has its own battery power). I can plug thumb drives and USB sdcard adaptors into it to move files both ways.
It will even plug into my camera and copy the pictures.
Kind of handy as the Flyer doesn’t supply power at its microUSB port to spin a hard drive.
It’s not what I call well built but seems to work.
At least it does the job! I didn't know we could use OTG harddrive for the flyer...
That's very cool. Vastly increases the number of movies I could take with me on a long trip!
ARRR
Ok so spent about £40 on one of these and it doesn't work with my Flyer(32GB WiFi 3G). Flyer is not rooted and running the latest official version of HC. I have tried both DC and PC but device still does not detect the OTG drive. My samsung mobile finds the device fine.
Are you using a standard micro usb cable ??
simtech1976 said:
Ok so spent about £40 on one of these and it doesn't work with my Flyer(32GB WiFi 3G). Flyer is not rooted and running the latest official version of HC. I have tried both DC and PC but device still does not detect the OTG drive. My samsung mobile finds the device fine.
Are you using a standard micro usb cable ??
Click to expand...
Click to collapse
Yes using a standard micro usb cable
Try this ... Shut down your Flyer (make sure Fast Boot is unchecked in settings) then turn on your drive in DC mode and restart your Flyer.
Your Flyer should find it then and will work from then on.
Using your file explorer of choice you should see a new folder called USB
Hi, tried this but still no go. Ran a USB host and USB OGB diganostics app which still fail to detect the device. The drive works with my camera/Samsung phone and brothers PSP. May have to fork out for WIFI drive.
Still no go with the OTG device. Tried with a friends Flyer and same results. I am going to try this device, is fairly cheap.
http://www.ebay.co.uk/itm/USB-2-5-For-OTG-LCD-Partner-Storage-Backup-HDD-/260990399369?pt=UK_Computing_HardDrives_RL&hash=item3cc43d7389
simtech1976 said:
Hi, tried this but still no go. Ran a USB host and USB OGB diganostics app which still fail to detect the device. The drive works with my camera/Samsung phone and brothers PSP. May have to fork out for WIFI drive.
Click to expand...
Click to collapse
Strange … My Flyer is the 16 Gig Best Buy wifi model and is rooted I wonder if that makes a difference
I use an OTG USB cable on my US BB Wifi Flyer , the standard usb cable doesn't work for me.
DigitalMD said:
I use an OTG USB cable on my US BB Wifi Flyer , the standard usb cable doesn't work for me.
Click to expand...
Click to collapse
I have an OTG cable from my samsung but this did not work. what OTG cable are you using? I gather you are connecting the USB device into the OTG cable via a powered hub?
Got it working but it's a hackjob, was going to root but having to downgrade then upgrade again was a pain and was not guaranteed to work. Tried running the OTG cable into a powered hub but for what ever reason would always come up USB device not recognised when plugging in any memory device. Tried 3 USB hubs with the same result. Ended up cutting up an OTG cable and a few other USB cables so I could provide power to the device and then power to the tablet as well. For whatever reason i need to provide power to he memory stick before plugging into tablet. I have tested 4 different memory pens and 1 external harddrive and they all work.
I just bought a generic OTG cable, its about 6 inches long. I think it may have come from HP. I have used both a powered hub and a y-usb hard drive cable and both worked for me.
You have to have power on the device before you plug it onto the FLyer so that on connect the Flyer software knows what type of device it is and can load the driver. Otherwise the Flyer will label it unknown and disable the device.
Managed to get USB on the go to work on my Jetstream. See the following post. as the flyer very similar, should work for flyer too.
http://forum.xda-developers.com/showthread.php?p=24814701
Sent from my HTC PG09410 using XDA
I'm looking to be able to use my external HDD (1TB WD passport) on my phone via OTG. As I understand, ntfs support varies with kernels etc but I'll cross that bridge when I come to it as I think there's a more fundamental problem.
I've got an OTG cable, and my mouse, usb pen drive, keyboard etc work with it. The HDD doesn't, because the phone can't provide enough power to operate the thing. I thought I could get around this by connecting it via my usb hub (which runs off external mains power) but when I connected this up to the phone and plugged the HDD in nothing happened. Likewise, the mouse and pen drive etc could also not be recognised by the phone when they were each plugged in via the hub (one at a time, I wasn't trying to run 8 things at once!) even though they worked perfectly when the phone itself was powering them when they were directly plugged into the OTG cable (if that makes any sense).
So, assuming it was a problem with the hub, I instead tried the method in this thread http://forum.xda-developers.com/showthread.php?t=1828032 and made my own y type cable so that now rather than the phone providing power to the OTG peripheral, the power now comes from a standard USB phone charger. I'm fairly confident that I did all the soldering correctly and there weren't any short circuits.
When I tried using this, I had the same issue as with the hub. None of the mouse, the pen drive etc could be recognised with the modified OTG cable, which was odd as physically nothing had changed from the point of view of the peripheral plugged into the OTG (the data cables connecting it to the phone were unchanged, and it was still getting 5V power, just from the wall rather than my phone) which makes me think perhaps the problem is a software one where the phone only recognises a USB peripheral/begins USB host mode if the peripheral is actually draining power, since the power leads running from the phone side of the OTG cable are now just an open circuit.
Just to confirm I hadn't just snipped a data cable by accident when modifying the OTG cable, I re-soldered the OTG cable to how it originally was and it worked the same way it had previously. This means all the data cables are still intact, so I think it must be a software issue.
I thought maybe a way of testing this would be to modify the y cable and connect the red and black power cables coming out of the phone to each other via a fairly hefty resistor (so you still get power flowing from the phone even though the USB peripheral is powered by the wall). But it seems a bit dangerous!
Has anyone else had trouble with this? I've read around on forums and for a lot of people USB hubs and y type OTG cables seem to "just work", although I've not seen anyone with an i9300 reporting success. I'm running the latest version of liquidsmooth, but have also tested on CM10.1 and have the same problem. It might be an AOSP thing that stock samsung firmware will fix?
Let me know your experiences!
TLDR: I'm pretty sure I've got a software issue where my i9300 only recognises a USB peripheral/begins USB host mode via OTG if the peripheral is actually draining the phone's power, and so doesn't work when a USB hub or externally powered (y type) OTG cable is being used.
Thank you!
It apparently only supports 500GB regardless of power source
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
It apparently only supports 500GB regardless of power source
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Really? That's odd - is that an android limitation or samsung? Either way it still seems weird that my y cable/hub didn't work for the mouse/keyboard, is that something you'd expect?
Sorry I didn't read that part.
I have a portable passive hub. Kb and mouse working fine...
Sent from my GT-I9300 using Tapatalk 2
Hi,
I am new to these forums. I relcently installed cyanogenmod 13 and after that installed elementalX on nexus 7 2013 flo.
I have usb debugging on. I have installed stickmount.
I have enabled OTG + charge from kernel EK Manager.
I connected my Y OTG cable. Tablet can be charged but when I connect any usb device to usb interface of OTG cable nothing happens. I donot even get pop up on my device that something has been connected. Although if I connect anything, I can see it is getting power. As, I connected a usb hub which lights up and also connected easycap and the light on it also lit up. But I am confused as all my usb devices can get power but my tablet is not recognizing any hardware addition.
Also, is this cynogemod issue or kernel issue . I will consider fresh install if I know where the problem is.
thanks
Quote Edit
Solved: I was using angled adaptor which was not allowing otg to work.