Related
Ok, got my SGS2 a few days ago, Installed KIES and Samsung drivers.... When I try to flash an insecure kernel on my phone (To obtain root permissions), Odin keeps getting stuck on zImage... Anybody got a solution??
Make sure you are flashing the correct kernel version and that all kier processes are closed.
Already did that, still no luck getting past zImage
Did you manage to resolve this? I'm in a similar position - i'm trying to install clockworkmod but when I select start in odin once the file has been selected (PDA) it seems to proceed but then just hangs at zImage
<ID:0/017> Removed!!
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> zImage
This is my first flash, however I just cannot get it to work? I have all the relevant drivers on my mahine and my S2 is rooted, any ideas anyone?
Thanks
As per that post a couple above yours, make absolutely 100% sure that Kies/any of its processes are not running in Windoze Task Manager. Can't stress this enough.
Failing that, could be a bad download, try downloading the kernel (I presume you're trying to flash a kernel that has CWM ?) again.
Also, uninstall Kies. Reboot your PC, download a fresh copy of Kies (you need the drivers for Odin to work), fresh reinstall of Kies. Reboot & try flashing the kernel again.
thanks for the fast reply! I did have kies open earlier it may have not closed correctly, i'll try a reboot first before uninstalling and reinstalling kies
thank you
ok ive tried that but no joy
just to clarify im not trying to install a new rom - just trying to install clockworkmod (have downloaded the tar file from this site) and have rooted my s2
i used the new method mentioned on this site to root my s2 which only installs SuperUser and nothing else hence me wanting to install CWM
..still searching for a solution, any help appreciated
Uninstall KIES. It's safe. Samsung USB drivers are a different package.
Change ports, re-download, etc. Make sure your cable is in a good state.
quick update, i've uninstalled kies and tried again but no luck. I've also tried a different cable but again nothing
I'm thinking perhaps it might be the .tar file itself - I initially mentioned I downloaded it from this site but now i've realised it wasn't from this site but another... rootingdroid .com
maybe I need to re-download CWM (if available from here) and try again
Also worth mentioning my phone is network locked to Orange (but I dont believe this would have an affect on anything)
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
tried the above but same issue, seems to stop at zimage no matter what tar file I use (PDA)
do I need to 'wipe cache partition' in the existing Android system recovery first? Dont think so but just covering al angles just so i can get CWM, thanks
got it installed! used an older version of odin .... version 1.30
may help others with the same issue
thanks to all
flylife2k said:
got it installed! used an older version of odin .... version 1.30
may help others with the same issue
thanks to all
Click to expand...
Click to collapse
I also could not do it using odin 1.85. Looks like Odin 1.81 as posted by entropy is working. It's still going on though.
Hi guys,
So I tried to root my phone today - I dont know what happened or what I did wrong, but my phone now is locked constantly into a boot cycle. It'll turn on, boot into the lockscreen for maybe 20 seconds, then reboot itself. Nothing i do seems to help. I tried flashing back to the stock rom, flashing back to stock rom + root, but to no avail. Ive been desperately trying to find a solution that will at least allow me to get to the data on the phone (i have some pictures that i haven't backed up that are absolutely essential) and then i have no problem doing a complete data wipe or whatever is necessary.
Someone PLEASE help! phone is completely unusable at this point!
Yes, I can enter download mode
re: Boot Looping
victor3063 said:
Hi guys,
So I tried to root my phone today - I dont know what happened or what I did wrong, but my phone now is locked constantly into a boot cycle. It'll turn on, boot into the lockscreen for maybe 20 seconds, then reboot itself. Nothing i do seems to help. I tried flashing back to the stock rom, flashing back to stock rom + root, but to no avail. Ive been desperately trying to find a solution that will at least allow me to get to the data on the phone (i have some pictures that i haven't backed up that are absolutely essential) and then i have no problem doing a complete data wipe or whatever is necessary.
Someone PLEASE help! phone is completely unusable at this point!
Yes, I can enter download mode
Click to expand...
Click to collapse
When you flashed the STOCK rom was it a ZIP or a TAR file?
Before I can help I need to know.
Zipfiles require CWM Recovery for flashing and TAR files require ODIN for flashing.
I flashed the TAR file in ODIN 1.85, PDA.tar from the unzipped file UCKH7_stock_odin.7z
So I just tried it again, for something like the 4th or 5th time. I checked only "AUTO REBOOT" and "RESET TIME" in Odin, selected PDA as PDA.tar from UCKH7_stock_odin, got the following sequence from Odin
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
where I'm locked into the bootcycle again. It does boot up into my lock screen, I can interact with the screen for maybe 10 seconds, and then it just reboots. I've let it run for a little while to see if it can figure itself out, but after the third or fourth time i get nervous and pull the battery.
victor3063 said:
I flashed the TAR file in ODIN 1.85, PDA.tar from the unzipped file UCKH7_stock_odin.7z
Click to expand...
Click to collapse
ok, here is what to do.
Download this stock rooted rom: http://www.multiupload.com/PNQC9KOD4D
and download the MODEM file for the rom: http://www.multiupload.com/VWTSCXE5L0
After you extract both TAR files flash both of them at the same time by
putting the PDA tar file into the PDA slot in ODIN and the MODEM tar file
in the PHONE slot in ODIN then start flashing.
Don't check or uncheck any checkboxes in ODIN.
When its done flashing, it should boot into the STOCK ROOTED rom.
Before, or after doing the above boot into recovery and do a data wipe/factory reset
Sent from my SAMSUNG-SGH-I777 using XDA App
Didn't work. Still stuck in the same boot pattern. Redownloaded ODIN, redownloaded all the links again just to guard against any kind of corrupted files, but same end result, constant reboot cycle.
Samsung galaxy s2 --> at&t rethink possible --> preparing usb storage/lock screen --> reboot
You probably need to do a wipe data/factory reset.
Since you apparently have files that you want - enter CWM recovery and adb pull them.
re: try this
victor3063 said:
So I just tried it again, for something like the 4th or 5th time. I checked only "AUTO REBOOT" and "RESET TIME" in Odin, selected PDA as PDA.tar from UCKH7_stock_odin, got the following sequence from Odin
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
where I'm locked into the bootcycle again. It does boot up into my lock screen, I can interact with the screen for maybe 10 seconds, and then it just reboots. I've let it run for a little while to see if it can figure itself out, but after the third or fourth time i get nervous and pull the battery.
Click to expand...
Click to collapse
Try this first if you have not tryed it yet, it looks like odin flashed the PDA
file sucessfully, but did not flash the modem.
So put the modem into the PDA slot in ODIN and flash it.
If that don't work then do it vica versa and only flash the
PDA file in the PDA slot in ODIN.
This way you will know for sure which TAR file is not flashing.
(if you only have one TAR file to flash at a time with ODIN always put it in PDA slot)
If that don't work then try the method below.
Try this, turn off the phone or pull the battery, turn the phone back on or
replace the battery and go into CWM recovery and select
"Wipe Data/Factory Reset" Don't worry, it will NOT delete any pictures
or videos, or anything which you personcally have saved into a folder
you have created and it will not even touch the external sdcard if you have one.
It will however delete all the apps which you have installed in the phone prior
to having the problems you have now..
Is the data wipe / factory reset going to delete pictures off my phone? thats really my last resort.. I have a couple dozen pictures that I took on my phone since i purchased that I haven't had a chance to backup.
Does anybody have any ideas?
victor3063 said:
Is the data wipe / factory reset going to delete pictures off my phone? thats really my last resort.. I have a couple dozen pictures that I took on my phone since i purchased that I haven't had a chance to backup.
Does anybody have any ideas?
Click to expand...
Click to collapse
Its not going to delete any pictures, videos or even music you have
on the phone.
Anything which YOU have SAVED to the phone will not be touched
except usernames or passwords, credit card #'s might be deleted.
But actual files or folders you created will stay intact as well as
the external sdcard if you have one will not even be touched.
I think the reboot is occurring due to corrupted settings of network or files ystem. You can try this. pull out the battery, remove sim and sd card if you have any, then try booting..
Factory reset or data wipe should not theoretically wipe your pictures.. It basically wipes only /data partition. I have done factory reset which retained my pictures..
But to be on safer side, try the above step to see, if you can get the phone running..
Had same issue trying to factory restore with Odin. Wipe from e3 did the trick.
Sent from my SAMSUNG-SGH-I777 using XDA App
victor3063 said:
Is the data wipe / factory reset going to delete pictures off my phone? thats really my last resort.. I have a couple dozen pictures that I took on my phone since i purchased that I haven't had a chance to backup.
Does anybody have any ideas?
Click to expand...
Click to collapse
Those SHOULD be on /sdcard, but I can't guarantee it. Also, if you use 3e recovery, there's a chance that might hit /sdcard.
MJ, you should never guarantee something like that to someone.
Make sure you have ADB set up - I suggest Googling Droid Explorer if you're on Windows
Flash a CWM-enabled kernel
Enter CWM using the three-finger trick (this should work fine)
In CWM, go to Mounts and Storage and mount /sdcard and /data if they are not mounted
Connect to your phone using ADB and start looking for your files - I think Droid Explorer makes this MUCH easier by providing a nice graphical frontend to ADB push/pull
so this is what i'm doing right now.
Obviously my problem is constant rebooting.
1. Flash UCKH7 stock odin PDA.tar and UCKH7 modem via odin onto phone via odin
2. flash CWM recovery ClockworkMod Recovery 5.0.2.3 via odin as PDA
3. both these step pass OK, now Samsung Galaxy S2 I9100 bootscreen with yellow triangle shows up + at&t logo, however constant reboot problem is still present
4. pull battery unplug usb replugin battery and attempt to enter cwm recovery via holding down volume up+volume down+power button
5. CWM based recovery 5.0.2.3 flashes up for a brief second after bootscreen, then immediately reboots and reenters boot cycle
REALLY stuck here. i spent the whole day looking through the forum and i'm really not sure where i went wrong. the only thing that doesnt have the reboot cycle is download mode.
im basically trying to reach the step where i can enter cwm recovery and attempt to do a factory wipe, but it still reboots the enter i enter cwm recovery and enters the normal reboot cycle. i have NO IDEA how i couldve corrupted the file system this badly, perhaps the usb cable got bumped during the initial root? who knows. all i know is i cant even bring the phone to any form of usable status right now. any ideas?
re: boot looping
victor3063 said:
im basically trying to reach the step where i can enter cwm recovery and attempt to do a factory wipe, but it still reboots the enter i enter cwm recovery and enters the normal reboot cycle. i have NO IDEA how i couldve corrupted the file system this badly, perhaps the usb cable got bumped during the initial root? who knows. all i know is i cant even bring the phone to any form of usable status right now. any ideas?
Click to expand...
Click to collapse
You really do have a problem.......
I remember before getting this new SGS2 when I had the Samsung Infuse.
There was a thread in the Infuse forum called "The Ultimate Unbrick", I know
that there is a simular thread here for our SGS2 however the unbrick here is
lacking the PIT file.
I am 100% sure that if you could get a hold of something like the
Ultimate Unbrick which included the *.PIT file that it would solve the
problem you have.
The Ultimate Unbrick for the Samsung Infuse consisted of a
PDA*.TAR, PHONE*.TAR and the *.PIT file and it came with ODIN too.
The PIT file repartitions the sdcard to stock which fixes any partition
errors the phone may have due to flashing a non-compatible rom or
due to the flashing process being interupted while odin was flashing.
You might want to ask around the forum here if anyone has a stock
ODIN rom which includes PDA, MODEM and the PIT file for SGS2 i777.
I know for a fact that for the Infuse phone a complete stock package like
that always worked for fixing and solving problems like yours.
The only problem a package like this could not fix was if the phone
was hard-bricked meaning that it would not turn on at all no matter what.
Good luck with it..........
wow, the thought that i might be completely bricked is genuinely terrifying. really frustrating too, as i definitely consider myself fairly tech savvy.
Are you getting any indication that any of your capacitive buttons are acting like they are continually being pressed?
Did your phone at any time get wet?
The reason I ask is it almost seems like a hardware problem at this point. I would pull your battery and check the water indicators and see if there are any signs of moisture.
If there are no signs of moisture and you are pretty positive the phone is dry I would put the battery back in, don't turn it on, plug it into a wall charger and let it charge for a few hours. Then try to get into recovery again.
If after that you are still getting boot loop even in recovery we will link you to a .pit file and have you try a re flash to stock with a re partition.
Sent from my SAMSUNG-SGH-I777 using XDA App
thanks for the advice dayv.
I'm 100% sure theres been no water damage. I've barely had the phone for a week, and everything was working fine up until now. Other than that, I guess i'm going to have to go for the pit method - going to charge the phone overnight, see if it boots into cwm one last time, and then i'm going to use the following pit file from paulyhoffman
http://forum.xda-developers.com/showthread.php?t=1286218
so just to go over the procedure one last time - download mode on phone (only thing that seems to be working correctly so far)
flash PIT (I777UCKH7.pit), PDA (PDA.tar) and PHONE(UCKH7_modem.tar) at the same time, with REPARTITION, AUTO REBOOT, and RESET TIME checked in Odin?
Hi guys,
I've owned android phones since the G1, motocliq, nexus, sgs2 (intl), motodroid, all rooted, custom rom, etc etc... So when a friend asked me to unlock (for which i had to root) his i777 I thought I could handle it.
I followed the guide: http://forum.xda-developers.com/showthread.php?t=1286220
Went into download mode (could only do it with the VOL+-USB trick) and flashed CWM on Odin. Flashed fine, no problem, rebooted and only showed SAMSUNG letters on the bootup, nothing more. Tried going into CWM Recovery, no luck, Download mode, works fine. So I went over and re-flashed it, worked, but still can't get it to boot, or Recovery to work.
So then I started trying to flash other PDA's thinking i could do it, and maybe cwm was bugged, every time I try to flash ANYTHING that's not that specific CWM it says Write error, FAILED. When i reboot, the phone is softbricked (computer-phone logo saying connect recovery on kies). After this nothing at all will flash, except that CWM, which gives me download mode again... Which doesnt matter because the softbrick screen is a download mode in itself.
Im running out of options, im not sure where I should keep looking, Heimdall, installed, tried to flash, it transfers, at 99% says error writing and cancels. Tried flashing a new .pit and repartitioning, same story, wont let me.
Any suggestions would be more than welcomed :/
Sincerely,
Rodo
See if you can go back to out of box:
http://galaxys2root.com/att-galaxy-s2/how-to-unroot-att-galaxy-s2-sgh-i777/
Rodocopz said:
Hi guys,
I've owned android phones since the G1, motocliq, nexus, sgs2 (intl), motodroid, all rooted, custom rom, etc etc... So when a friend asked me to unlock (for which i had to root) his i777 I thought I could handle it.
I followed the guide: http://forum.xda-developers.com/showthread.php?t=1286220
Went into download mode (could only do it with the VOL+-USB trick) and flashed CWM on Odin. Flashed fine, no problem, rebooted and only showed SAMSUNG letters on the bootup, nothing more. Tried going into CWM Recovery, no luck, Download mode, works fine. So I went over and re-flashed it, worked, but still can't get it to boot, or Recovery to work.
So then I started trying to flash other PDA's thinking i could do it, and maybe cwm was bugged, every time I try to flash ANYTHING that's not that specific CWM it says Write error, FAILED. When i reboot, the phone is softbricked (computer-phone logo saying connect recovery on kies). After this nothing at all will flash, except that CWM, which gives me download mode again... Which doesnt matter because the softbrick screen is a download mode in itself.
Im running out of options, im not sure where I should keep looking, Heimdall, installed, tried to flash, it transfers, at 99% says error writing and cancels. Tried flashing a new .pit and repartitioning, same story, wont let me.
Any suggestions would be more than welcomed :/
Sincerely,
Rodo
Click to expand...
Click to collapse
Use my return-to-stock packages from dev forum.
Hi Entropy, I've tried but I can't seem to find an Odin flashable .tar, they're all CWM flashes and my CWM is screwed.
> http://forum.xda-developers.com/showthread.php?t=1289460
Oh and I tried flashing http://forum.xda-developers.com/showthread.php?t=1286432 with heimdall too. write error
Did you try this?
http://forum.xda-developers.com/showthread.php?t=1286432
This has the back to stock odin files, Thanks to Entropy!
This has UCKH7_stock_odin_noroot.7z which is flashable by odin. Try this.. You have to use 7zip to get the tar file..
Yup.. no luck :/
Error writing
Changed drivers, installed heimdall, used a different computer, no luck. (and works just fine with my other phones so I doubt its that.)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try installing Entropy's stock, or stock + root using one of these Odin3 One-Click Downloaders. That will take some of the variables out of the equation. If that doesn't go, you need to figure out if the problem in in the pc or the phone. Let us know your results.
I don't guess you need instructions, but if you do, they are in the flashing custom binaries guide linked in my sig.
Tried at least two previously, they report the same error. giant FAIL in red. I tried another computer previously, and this computer flashes my i9100 just fine (which i presume are the same drivers). In any case I installed the heimdall drivers for USB (on windows, which ruins Odin, but works fine after you uninstall those drivers) included in the package.
Still having no luck with this issue... Anyone know what could be causing that write error on download mode Odin? Perhaps I could flash a different recovery console?
Have you installed Samsung kies just to make sure you have proper drivers? Can make all the difference in the world.
Some people have a tough time getting the wrong drivers uninstalled. Easy check if that is the problem, go to a different pc that you haven't plugged your phone into and first install the right version of kies that you need.
Then plug your phone in and flash through Odin, transfer files over or redownload, hopefully all will be well.
Sent from my SAMSUNG-SGH-I777 using XDA App
Im still stuck with this issue and apparently after a few extra flashes it now shows:
Custom binary download: NO
Current Bunary: Samsung Official
Which isnt true, but w/e. It will still only flash SGH-1777 clockwork recovery and it will now not even show the samsung logo and become unresponsive as soon as you put the battery in. (the phone heats up, even if i dont try to turn it on, drains the battery dead in a couple hours)
So, I want to give it a try with heimdall and a full repartitioning, but I do not have the necessary files. Ive been looking and I cant find all the partition files, aka
PDA/Code:
FactoryFS=factoryfs.frs
Kernel(zImage)=zImage
Param.lfs=param.lfs
Primary Bootloader=boot.bin
Secondary Bootloader=slb.bin
CSC:
Cache=cache.rfs
Database Data=dbdata.rfs
In Other:
Modem=modem.bin
Recovery=recovery.bin
Could someone dump these files for me? Thanks!
"NAND WRITE START!" from Odin when trying to flash a Brand new S3 i9300.Problem from the box.
No service centre here.
Thanks
Why is it so hard to post in the right section for some? You drive in the opposite lane with you care also? "didn't bother looking for signs or search for other cars so sorry daaah"
Sent from my GT-I9300 using xda premium
Stop ****ing around with it! If you don't know what your doing....don't do it! Seriously man.....
Sent from my GT-I9300 using xda premium
Noted, After opening the box ,the client wanted latest whatsapp plus a new dialup pad app.After that handset hung and rebooted in samsung i9300 only.Download mode ok but same error.
I find it really helpful of you all to just yell at someone who is trying to find an answer. I have the same problem, and I am not inexperienced with flashing phones. The question still remains: Can there be something done via Odin or adb or whatever or is it a case for repair.
I would really, really appreciate to get some useful answers. I can **** myself I don't need others to do this.
Thanks in advance.
EDIT: I have found a solution thanks to a very helpful friend who found the relevant post here on xda (http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16). You need to flash a 3-file stock rom via Odin v3.0.4 with mx.pit-file and repartition ticked. This worked for me and I very much hope that it also works for everyone else.
With all the pit files, i m getting there is no pit file.I m still looking for 3 files firmware.
Can someone post me a link for a 3 files pda phone and csc for S3.All the files i ve found are single file.
Thanks
The only 3 part files and pit for the Samsung range have in the past been posted on Sammobile.com .You will have to look and see if they post such for SGS3 . Never seen them on XDA and 3 part files posted on XDA have in the past been from sammobile .
jje
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
zimbardo.ea said:
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
Click to expand...
Click to collapse
All your work and not one bloody thanks, come on people, thank the woman!!
zimbardo.ea said:
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
Click to expand...
Click to collapse
Man, you are so wonderful, will post result.Done or not, you are a time saver.
Thanks ......Thanks
History of the device.
Brand New from the Box,The owner went to google-play(market) and downloaded 2 apps.One of them whatsapp.The phone froze and rebooted and Stuck at Startup Logo.
Update:Using the 3 Files firmware.
1= With pit file:
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Set Pit file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
---------------------------------------------
2= Without Pit File
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!
param.bin
tz.img
boot.img
Complete(Write)operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
----------------------------------------
The Only File which can be loaded SUCCESSFULLY and Odin can give PASS is GT-I9300_Boot_Recovery.tar, But device will reset and back in Download mode.
Ps: All types of Single files could not be loaded
Only Download Mode available,Phone cannot enter Recovery mode
All Kernels and recovery tars cant cant fully be loaded,Odin will stop and FAILED
Different types of Odin tried,including 3.04
==========================================
No Service centre in this Country,So,will just keep it till Solution Comes.
blaiseid said:
History of the device.
Brand New from the Box,The owner went to google-play(market) and downloaded 2 apps.One of them whatsapp.The phone froze and rebooted and Stuck at Startup Logo.
Update:Using the 3 Files firmware.
1= With pit file:
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Set Pit file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
---------------------------------------------
2= Without Pit File
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!
param.bin
tz.img
boot.img
Complete(Write)operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
----------------------------------------
The Only File which can be loaded SUCCESSFULLY and Odin can give PASS is GT-I9300_Boot_Recovery.tar, But device will reset and back in Download mode.
Ps: All types of Single files could not be loaded
Only Download Mode available,Phone cannot enter Recovery mode
All Kernels and recovery tars cant cant fully be loaded,Odin will stop and FAILED
Different types of Odin tried,including 3.04
==========================================
No Service centre in this Country,So,will just keep it till Solution Comes.
Click to expand...
Click to collapse
Which pit-file did you use? The mx.pit file? It worked with this one only. I'm sorry that my help didn't solve your issues
i tried all pit files including the mx one with no luck.
blaiseid said:
i tried all pit files including the mx one with no luck.
Click to expand...
Click to collapse
just use (mx.pit) file in 10 seconds your smartphone is back
treskilos said:
just use (mx.pit) file in 10 seconds your smartphone is back
Click to expand...
Click to collapse
I had my phone bricked, could enter only in download mode, nothing more, tons of failed installations in Odin
Well, after flashing ONLY the mx.pit File, i was able to flash then the custom recovery and even a single PDA firmware file
THANKSSSS!
treskilos said:
just use (mx.pit) file in 10 seconds your smartphone is back
Click to expand...
Click to collapse
OMG THANK YOU....I almost got a heart attack ^^
I confirm using the mx.pit file with odin worked...could boot to recovery and flash a rom from sd.
Thanks again
Can someone help me please?
As i said in the previous post i managed to get to the recovery menu and flash a custom rom but whenever i try to reflash the stock with odin it stucks at NAND Writing!
I don't know what to do i tried everything...other version of odin other usb, installed kies again ect....
I'm on Android Revolution HD right now....my phone is a Samsung Galaxy S III GT-I9300...i really wound like to be able to flash the stock rom is there a way to install it from the CWR and if yes will i be able to install CWR after?
edit: also i forgot to add i have siyah kernel 1.8.9 and previously installed the siyah recovery menu from the foxhound 2.2 rom..i'm on CWR now tho...
zeroblu3 said:
Can someone help me please?
As i said in the previous post i managed to get to the recovery menu and flash a custom rom but whenever i try to reflash the stock with odin it stucks at NAND Writing!
I don't know what to do i tried everything...other version of odin other usb, installed kies again ect....
I'm on Android Revolution HD right now....my phone is a Samsung Galaxy S III GT-I9300...i really wound like to be able to flash the stock rom is there a way to install it from the CWR and if yes will i be able to install CWR after?
edit: also i forgot to add i have siyah kernel 1.8.9 and previously installed the siyah recovery menu from the foxhound 2.2 rom..i'm on CWR now tho...
Click to expand...
Click to collapse
Go to recovery and then mounts and storage.
Format system, data and cache. Also do a factory wipe on the first cwm page.
After that pull battery wait 5 seconds abs reinsert it.
Hold power home and vol down to go to download mode. Then press the up arrow.
Then plug it in to computer. In odin select pda csc and modem or if it's a one file firmware just select it in pda. Do not tick repart or select a pit file.
Then hit start.
Drew071
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Go to recovery and then mounts and storage.
Format system, data and cache. Also do a factory wipe on the first cwm page.
After that pull battery wait 5 seconds abs reinsert it.
Hold power home and vol down to go to download mode. Then press the up arrow.
Then plug it in to computer. In odin select pda csc and modem or if it's a one file firmware just select it in pda. Do not tick repart or select a pit file.
Then hit start.
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OMG this actually worked...
So here is what i did...step by step...
1. Uninstalled Kies but did keep the USB drivers..
2. Made a Nandroid backup in CWM and followed Drew071's instruction and removed the ext_sd card...i actually did that before but without the pull battery step...
3. Used Odin 3.07 with only auto reboot and f. time reset ticked and loaded the stock rom that i took from sammobile in PDA...
5. Flashed as usual O_O....
I really don't know what it was but it scared the s..t out of me ^^
I'll try to root the stock FW now with the usual odin method and let you know if it works...thx all for your support
EDIT: Ok so i used CF-Auto-Root-m0-m0xx-gti9300 with Odin v3.07....all went well and i'm a happy root user again ^^
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
honzicek69 said:
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
Click to expand...
Click to collapse
If I'm not mistaken boot.img is the bootloader, not the recovery. Are you sure you can't get into recovery using the 3-button-combo? If not I would try flashing this recovery via ODIN. And then try to reboot into it using the combo. Then flash CM zip from there again.
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
honzicek69 said:
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
Click to expand...
Click to collapse
Ah, I'm sorry I misunderstood. I thought that was just a snippet of the log... Try flashing the recovery I provided and see if it flashes. If not, maybe you can flash stock firmware with pit file (new partition table). If nothing flashes, I have no further ideas.
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
rp158 said:
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
Click to expand...
Click to collapse
I could be mistaken but I believe the 3-part-roms (csc / pda / phone) is the "old style" how roms where put out by sammy. You would have to search but I would think you can also use the version you get from sammobile nowadays (one zip) and additionally just use the gt-i9300 pit file found somewhere here in the forums.
@Hawaiihemd: be shure, you're wrong.
honzicek69 said:
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
Click to expand...
Click to collapse
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
rp158 said:
@Hawaiihemd: be shure, you're wrong.
Click to expand...
Click to collapse
@rp158 Well, I think I only made a small error in my assumption.
Here are the details on the sammobile download. It seems to hold everything a "3-part-version" holds. I downloaded the file and a look at the .tar file inside the single .zip seems to confirm that.
This post suggests that flashing the .tar with the pit file should work.
I don't know because I haven't tried myself, maybe you have. Or I'm missing a piece of the puzzle. If so, maybe you could point me to it!?
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
rp158 said:
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
Click to expand...
Click to collapse
You didn't, don't worry. I was a little stumped maybe, but only because your answer was so terminal. Actually I only wanted to start a discussion about this, because you seemed to know more about said process than me and I always try to gain knowledge here to better help solving problems. I haven't been in this forum for long or into android for that matter...
That said, I have done the "3-files" version of this process with a .pit file thrice already on different gt-i9000s. Always worked flawlessly.
Looking at the ones in the post @tallman43 suggested, I found the contents of those 3 .tar.md5 files in summary(!) similar to the ones in the 1 .zip from sammobile. That's why I thought it could work in the first place.
One thing I'm sure of is that in both cases the repartition info is in the .pit file. If you choose none, the MMC should not be repartioned. If partitions are reformatted... that's another deal.
Concerning the efs partition, to/from where that info is stored/restored during repartitioning of the MMC... that's a very interesting question!
tallman43 said:
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
Click to expand...
Click to collapse
Thank you very much for this hint. It worked well. I used the all files from KOR zip and 1.85 ODIN. Now i have the Korean version but at least i have something to start with and phone which works now.