so i just got the nero 3 flashed on my vibrant got the oclf working, and to finish i was wondering how to get that Super IO Kernel everyone is talking about?
Its on Eugene373's forum.
http://eb-productions.proboards.com/index.cgi
flash it like you would a custom rom through cwm
will this erase any of my stuff?
HRodMusic said:
will this erase any of my stuff?
Click to expand...
Click to collapse
no it will not.
Related
I have a dumb question, and didn't seem to get a direct answer. I just recently started flashing new roms and using odin, but was curious about O/Cing. With the Fusion rom already flashed, do I just flash the Voodoo kernel or do I reflash the stock firmware and THEN flash the kernel followed by the rom? Or is there something I should or should not do in there, lol. Any input is appreciated, as I am relatively new to all this.
Sent from my Vibrant using XDA App.
If your new to all this don't use voodoo just yet unless your willing to deal with a brick as it's very easy to brick with voodoo
V5 custom vibrant
Any suggestions on getting me familiar with Voodoo then? Lol
Sent from my Fusion Vibrant.
Go to team whiskey web site and read about it you can find a link in the obsidian v5 original post
V5 custom vibrant
Appreciate it
Sent from my Fusion Vibrant.
Ok, so I read up and flashed the Project Core v2 kernel last night on the 1.2 Fusion rom and it ran perfectly and was super quick at 1200/200 on setcpu. Problem is today after rebooting, it will completely freeze every once in a while while doing something media-wise, such as watching youtube videos or playing Hyper Jump. I know I didn't flash the kernel or rom wrong, so is there something I am missing? I also have the OCLF installed, if that matters.
Tonight I am going to reflash them both to see if it works, but would like to see if there is something I can do before I get off work.
Sent from my Fusion Vibrant.
danerer said:
Ok, so I read up and flashed the Project Core v2 kernel last night on the 1.2 Fusion rom and it ran perfectly and was super quick at 1200/200 on setcpu. Problem is today after rebooting, it will completely freeze every once in a while while doing something media-wise, such as watching youtube videos or playing Hyper Jump. I know I didn't flash the kernel or rom wrong, so is there something I am missing? I also have the OCLF installed, if that matters.
Tonight I am going to reflash them both to see if it works, but would like to see if there is something I can do before I get off work.
Sent from my Fusion Vibrant.
Click to expand...
Click to collapse
The chips in our phones are not stable when over clocked.
Sent from my SGH-T959 using XDA App
danerer said:
I have a dumb question, and didn't seem to get a direct answer. I just recently started flashing new roms and using odin, but was curious about O/Cing. With the Fusion rom already flashed, do I just flash the Voodoo kernel or do I reflash the stock firmware and THEN flash the kernel followed by the rom? Or is there something I should or should not do in there, lol. Any input is appreciated, as I am relatively new to all this.
Sent from my Vibrant using XDA App.
Click to expand...
Click to collapse
you can just flash the voodoo kernel over fusion,but not all vibrants are capable of using voodoo. i.e. the vibrants with the larger nand chip does not support voodoo. if you do flash the voodoo kernel and your phone does not support, everything will still work just fine,but voodoo will not be enabled.
as for OCing..not all vibrants are capable of OC. it may run smooth at first,but some vibrants will start freezing up or slowing down. i found dragons kernel to work amazing or core 1.0ghz kernel
brian_v3ntura said:
you can just flash the voodoo kernel over fusion,but not all vibrants are capable of using voodoo. i.e. the vibrants with the larger nand chip does not support voodoo. if you do flash the voodoo kernel and your phone does not support, everything will still work just fine,but voodoo will not be enabled.
as for OCing..not all vibrants are capable of OC. it may run smooth at first,but some vibrants will start freezing up or slowing down. i found dragons kernel to work amazing or core 1.0ghz kernel
Click to expand...
Click to collapse
Alrighty, I may just drop the OC then. I just wasn't sure if it was me or not.
Thanks for the input guys!
Sent from my Fusion Vibrant using XDA.
OK, so running Odex UVJL4 Voodoo Froyo Rom and I want to flash a new Rom Axura 2.2.5.9 Rom what is it going to take for me to flash this new Rom?
Do I need to uninstall Voodoo Lag Fix First and if so whats the best way to do that? And after thats done whats next? dont want to run into any issues! But I want that new Axura 2.2.5.9 Rom looks freaking awesome! Thanks for any help!
darkside79 said:
OK, so running Odex UVJL4 Voodoo Froyo Rom and I want to flash a new Rom Axura 2.2.5.9 Rom what is it going to take for me to flash this new Rom?
Do I need to uninstall Voodoo Lag Fix First and if so whats the best way to do that? And after thats done whats next? dont want to run into any issues! But I want that new Axura 2.2.5.9 Rom looks freaking awesome! Thanks for any help!
Click to expand...
Click to collapse
You don't necessarily need to disable voodoo if you go from a ROM with Voodoo 5.x enabled kernel to another ROM that utilizes Voodoo infused kernel. I've done it jumping from nero beta v3 with supercurio's jl4 kernel to nerov2+voodoo jl4 to nerov3+voodoo jl5. However, it is recommended to ODIN back to stock before jumping from ROM to ROM. It is also suggested to disable Voodoo just in case, I am just playing danger ranger
lqaddict said:
You don't necessarily need to disable voodoo if you go from a ROM with Voodoo 5.x enabled kernel to another ROM that utilizes Voodoo infused kernel. I've done it jumping from nero beta v3 with supercurio's jl4 kernel to nerov2+voodoo jl4 to nerov3+voodoo jl5. However, it is recommended to ODIN back to stock before jumping from ROM to ROM. It is also suggested to disable Voodoo just in case, I am just playing danger ranger
Click to expand...
Click to collapse
can I just disable voodoo then Flash the AXURA Vibrant Edition 2.2.5.9 Beast Rom
using Rom Manager.without to many problems? its a real pain odin back to stock!
thanks for any tips and help!
darkside79 said:
can I just disable voodoo then Flash the AXURA Vibrant Edition 2.2.5.9 Beast Rom
using Rom Manager.without to many problems? its a real pain odin back to stock!
thanks for any tips and help!
Click to expand...
Click to collapse
You can do that as well
EDIT: just remember to boot into CWR via the power menu and not from the ROM Manager
installed fine! its freaking awesome. lighting fast and no lag!
Hi there
The kind of kernel published here are only stock kernels, which means the exact same code build by Samsung for Vibrant phones.
Of course, there's a difference: Voodoo lagfix 5 stable has been injected in them, with its extensions and also ClockWorkMod recovery as default recovery.
Voodoo lagfix converts /system, /cache, /dbdata and /data to Ext4 with optimized parameters for speed but also guaranteeing data integrity.
Also, it configures the write behavior of Linux to prevent lag from happening, plus apply some memory management providing a better balance than stock settings.
Also supported: custom boot animation, init.d scripts and an improved adb shell (new!)
This kernel also installs the su binary for your convenience. Only activated once you download Superuser App from market. If you don't want to "root" your phone, skip this part.
How do choose the version?
The best version is the closest to the one of the ROM / system you run.
If you use a custom ROM instead of an official Samsung one, ask your ROM dealer which one is closer
update.zip you can flash with ClockWorkMod recovery (not 2e or 3e) or SGS Kernel Flasher
JL3+Voodoo http://dl.project-voodoo.org/stock+...+Voodoo-Froyo-T959D-TLJL3-unsigned-update.zip
.tar you can flash with Odin or Heimdall
JL3+Voodoo http://dl.project-voodoo.org/stock+Voodoo/tarballs/stock+Voodoo-Froyo-T959D-TLJL3.tar
Note, please disable any other lagfix previously installed, especially OCLF-kind (the conversion to Ext4 would take ages)
These kernels are only for Telus Fascinate (T959D), sorry Verizon Fascinate pals.
EDIT: How Lame, I created this thread in the General section after seeing other T959D threads here ^^ A moderator help is welcome
Thank you!
Just flashed this and enabled the voodoo lagfix! So far so good! Just a note...I have SGS Kernel flasher and it won't flash the .tar, it will flash the .zip.
Quadrant score: 1517 first try, 1577 second try.
Just sent you a little donation, thank you again.
Thank you, I updated now the post, also to say it's tested
THANK YOU!!!
Glad to see you on the fascinate, even if it is not the verizon version.
Sent from my SCH-I500 using XDA App
Wow wow wow.....thank you so much for this.
Custom roms for the T959D, YES?!?!!!!
Anyways, i appreciate your hard work. Is there any common issues?
is there anyway we can get this kernal overclocked and undervolted? im not giving up my 1.28ghz so i can have a working home button
Flashed this last night and everything is working fantastically. Many thanks as well as a donation later today.
LINKSLOVESANDROID said:
is there anyway we can get this kernal overclocked and undervolted? im not giving up my 1.28ghz so i can have a working home button
Click to expand...
Click to collapse
An overclocked version of this kernel would be fantastic as well, is that in the realm of possibility?
supercurio said:
EDIT: How Lame, I created this thread in the General section after seeing other T959D threads here ^^ A moderator help is welcome
Click to expand...
Click to collapse
thx 4 super! we have been saying that for weeks now and no1 has taken a stand. Some1 with as good a rep for android as u should b able to get us our own "hiding place"
By The way. is it possible to port a working i9000 kernal OC/UV kernel over to T959D?
daoom said:
Flashed this last night and everything is working fantastically. Many thanks as well as a donation later today.
An overclocked version of this kernel would be fantastic as well, is that in the realm of possibility?
Click to expand...
Click to collapse
Did you flash any i9000 or Vibrant roms onto your phone yet?
As this is a stock and stable kernel sorry guys overclocking wont happens with it.
cowvun said:
Did you flash any i9000 or Vibrant roms onto your phone yet?
Click to expand...
Click to collapse
I've flashed both in the past and the quirks were too much for me.
Nevermind guys.
Thank you so much for this, working awesome.
I'm flashing this now as I type, thank you for your hard work its appreciated.
Worked flawlessly here! Thanks.
Sent from my SGH-T959D using XDA App
Im running Nero v5 ROM which I understand is KA5 with the Speedmod Kernel on my Telus Fascinate T959D and its running superb
If I flash over the KA6 kernel, will I lose the Speedmod Kernel along with all the TWEAKS ??
With all these kernels around including the Voodoo injected T959D just posted by supercurio Im wondering whether which will be the best combination with Nero v5...Voodoo 5.2 lagfix is also now available so confused...
Question from a first time flasher.
Do I have to rename the zip to "update.zip" in order to flash?
Never mind. Apparently not!
I was running voodoo5 and tried to flash stupidfast but it wouldnt bootup. so i went into recovery and and did a nandroid recover and phone still wont boot up. can anyone help?
grillium said:
I was running voodoo5 and tried to flash stupidfast but it wouldnt bootup. so i went into recovery and and did a nandroid recover and phone still wont boot up. can anyone help?
Click to expand...
Click to collapse
1) stupidfast is an rfs kernel...you cant flash rfs over voodoo...try reflashing the voodoo kernel and see if that fixes it...otherwise odin is ur friend
2)stupidfast is "stupid old" why would flash eclair rfs kernels from december?
oo I see. I have no Idea im kind of a noob, do you know anythreads that have newer kernels?
Stickied in the Development Forum: http://forum.xda-developers.com/showthread.php?t=1013312
reflashing voodoo worked btw thank you
grillium said:
oo I see. I have no Idea im kind of a noob, do you know anythreads that have newer kernels?
Click to expand...
Click to collapse
since eclair is pointless i only keep track of froyo..but here:
http://forum.xda-developers.com/showthread.php?t=1013312
Or just stick with page 1 of development and not page 22.
good day.
chopper the dog said:
Or just stick with page 1 of development and not page 22.
good day.
Click to expand...
Click to collapse
there might be hidden gems back there
can you flash a new voodoo kernel over Voodoo 5?
can you flash a new voodoo kernel over Voodoo 5?
grillium said:
can you flash a new voodoo kernel over Voodoo 5?
Click to expand...
Click to collapse
u mean froyo v5 over eclair v5? prolly...but if you are upgrading to froyo i would just use an odin package...which will put you back to rfs...then flash the newer kernel and reconvert
OldManJames said:
there might be hidden gems back there
Click to expand...
Click to collapse
like this! http://forum.xda-developers.com/showthread.php?t=974902
hey do you have a link to an odin package for froyo?
grillium said:
hey do you have a link to an odin package for froyo?
Click to expand...
Click to collapse
Heres a hint: http://dl.dropbox.com/u/12726641/HINT.jpg
I'm currently using Ninja Speed Freak with Faux's 1.2 Kernal
I wanted to try out other roms because i've only used Ninja and Faux.
What is the best process to flash a new rom?
http://forum.xda-developers.com/showthread.php?t=1154600
Magnetox said:
http://forum.xda-developers.com/showthread.php?t=1154600
Click to expand...
Click to collapse
ah, completely missed the flashing of the rom part on there.
thanks!