Related
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
Just noticed this on eBay. Looks pretty substantial and possibly an acceptable option for the non-existent desktop stands from Asus.
Ordered one. Will post up some pictures once I get it.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140583405716&ssPageName=STRK:MEWAX:IT
FWIW, there are a handful of other generic stands like that on Amazon too. Most of these stands that are marketing for iPads will work fine too.
True enough. First one I've encountered while waiting for Asus!
I've bought a self-made in a german-forum (android-hilfe.de).
If somebody is interested i will send the link (At the moment it's not possible to post --> < 8 posts)
I've got these:
Folding wire stand
...and:
Folding milled aluminum stand
I like the first one better because it's super light and super adjustable. But you really have to tighten the thumb nuts if you don't want it to slowly collapse.
The second one claims to be made of aluminum, but its as heavy as brass or steel and it's a noticeable addition to a shoulder or backpack.
I am using one of these i got at burlington for like $6. use for the kitchen. Only issue is the angle could be back alittle bit more.
I think I will go and play around with some card tonight/over the weekend and see if I can come up with an Origami/pepakura-style stand (dual-angle of course) which I can make from thin Plastic-card. I have access to a greeting card creaser and would really like a light and portable stand that gives the ability to plug in the charge cable. If I get anything worth taking a snap of I will stick it up, with plans of course.
amazon.com/ gp/ product/ B000CKVOOY
This is a magnificent stand that I bought two of. It folds away to an easily storable size and has plenty enough flexibility and stability to be used in multiple orientations. The only negative is that the charging plug won't fit if you orient the tablet right-side-up though this is easily solvable if you invert the tablet.
http://www.amazon.com/ExoGear-Universal-ExoMount-Suction-EXO-MOUNT-BK/dp/B0050DZHD2/ref=sr_1_2?ie=UTF8&qid=1323809279&sr=8-2
Has anyone tried this mount with their Titan yet? I'm looking for a good mount for the car and this one looks like it's a better one compared to most (correct me if I'm wrong please).
I have two concerns...
(1) Is the grip small enough to fit between the volume down and camera button?
(2) Will the pressure from the clamp do anything to the side of the Titan since the back cover wraps around the screen?
Any feedback on how it will do with the Titan would be good... Thanks in advance!
-Cyber
(1) Yes
(2) No
I bought one this summer for my HTC HD2. I mounted it on my Ford Focus' dashboard and went on a 2500 km trip (using my HD2 as sat-nav).
The grip is fantastic, the ExoMount sticks firmly despite not being fixed to a flat surface. It never fell off and it's still in place right now, nearly 4 moth since I've put it on.
Another great thing about the Exogear is the ball joint. It gives you 3 degrees of freedom for orientation and it can also be fastened easily with a nut.
The build quality is also great. At first I was a little disappointed because it's not made of aluminium but I soon realised the lightweight high quality plastic holds very well.
The Titan fits even better than the HD2. The dimensions and weight are very similar but in landscape, the Titan can be gripped right in the middle so that the phone sits perfectly balanced (on the HD2 this is not possible because the volume rocker's position is too low).
P.S. the ExoMount can be applied to almost any surface but it has to be clean and dry
I received this mount over the holiday and am happy with it. I can't use it where I want to use it since it does not stick to the dash but maybe a few seconds tops. This is even with follpwing some of the tips from other websites. I now have it as a standard window mount and it works great there.
Has anyone put this in a Nissan Altima? It seems that the dash isn't as smooth as it should be for the suction cup to work.
-Cyber
Have bought this mount. Works as advertised and the stickiness too. Works for a diverse amount of phones. I tested it on the HD2, Galaxy Note and Titan (2011). The mount fits for all these phones, even with cases on.
Hello Community, hello girls and hello guys!
First thanks for this Awesome Forum, the very kind users (yeah most of them) and the perfect Devs!
All of you, helped me a lot in the past, so I decided to gave you something back (besides Donations)
Yeah its something very simple and easy, but I have to share it with all of you XZU owners!
I presenting you, the "few bucks" perfect Stylus for Xperia Z Ultra!
I wrote this complete Thread with this Pen, so i can garuentee you, that this works very good (besides my bad english grammar)
I Also painted some small Pics with Sketchbook Pro, and I find it very perfect!
I dont make any tutorials, cause the building of this is very easy!
FIRST: buy this Pen from Amazon, http://www.amazon.com/Zeimax-Universal-Smart-Tablet-Stylus/dp/B0055PTUE2/ref=sr_1_1?ie=UTF8&qid=1400166611&sr=8-1&keywords=smartphone+pen
as we all know, the XZU Display is very responsive and you can use also a Pencil for browsing through this peace of Hardware.
so I though, hey lets try a Headphone Jack...(maybe all of you tried it^^)
So I bought me this adapter: http://www.amazon.com/Nokia-Audio-Adapter-AD53-Origin/dp/B0069RYTGO/ref=sr_1_2?ie=UTF8&qid=1400167079&sr=8-2&keywords=nokia+ad-53( I found one at home, from my Symbian Nokia Times, maybe u can find another similar headphones or something, for a cheaper price, thats just for you to see what i mean )
Then I cutt off the rubber of the adapter, and i was surprised that it perfectly fits the size of the Pen (up in the Link)
I removed also the Rubber Tip from the pen, and push the adapter in the pen, and you guys maybe know,....it works like a charm
I uploaded some pics, so u can see it!
Have fun with it and I hope some of you will click Thanks Button
Peace!
-MOD Edit-
if you dont agree to something, please find something else. THANKS
Background:
I saw this thread, weeks ago and planned to do it, but procrastination got the better of me. I'm a little weird about purchasing things for a Mod since I can sometimes lose interest in projects while waiting for the parts. Either way, this mod was filed away in my "things to do" folder in bookmarks.
Today, I realized that I had the tools and extra time to attempt the mod. I knew from earlier in the week that I had the tools to attempt it. I had noticed, while working that my favorite pen was completely empty and I happened to have an extra headset adaptor, which ended up being an old 2.5 mm jack from an extra xbox 360 headset. Sure enough, they fit like hand and glove. I'm sure everyone has a good combination lying around their home and if you're like me and don't have the gumption or determination, take 15 minutes to have a look around your house for an old pair of headphones and pen that were meant to be together!
Meat and Potatoes
I pulled the empty ink cartridge out of an old Zebra pen and cut about half an inch off the end. I preserved the spring. I used a pair of pliers to pull apart the 2.5 mm jack of an extra microsoft xbox 360 headset bit by bit until I was left with just the plug. I fit it all together and used the spring in the pen body to give the tip a little give when in use.
Results.
I love it. The tip is a good size and the pen body feels natural. it works reliably, even though a skinomi screen protector.
Jrob2k said:
Background:
I saw this thread, weeks ago and planned to do it, but procrastination got the better of me. I'm a little weird about purchasing things for a Mod since I can sometimes lose interest in projects while waiting for the parts. Either way, this mod was filed away in my "things to do" folder in bookmarks.
Today, I realized that I had the tools and extra time to attempt the mod. I knew from earlier in the week that I had the tools to attempt it. I had noticed, while working that my favorite pen was completely empty and I happened to have an extra headset adaptor, which ended up being an old 2.5 mm jack from an extra xbox 360 headset. Sure enough, they fit like hand and glove. I'm sure everyone has a good combination lying around their home and if you're like me and don't have the gumption or determination, take 15 minutes to have a look around your house for an old pair of headphones and pen that were meant to be together!
Meat and Potatoes
I pulled the empty ink cartridge out of an old Zebra pen and cut about half an inch off the end. I preserved the spring. I used a pair of pliers to pull apart the 2.5 mm jack of an extra microsoft xbox 360 headset bit by bit until I was left with just the plug. I fit it all together and used the spring in the pen body to give the tip a little give when in use.
Results.
I love it. The tip is a good size and the pen body feels natural. it works reliably, even though a skinomi screen protector.
Click to expand...
Click to collapse
This V2 looks very nice
Thank both of you for the idea and implementation
**ZeroLemon contacted me about a week ago asking if I would like to receive a free review unit of the Nexus 6 Slim Power case, and I accepted. This is a non-bias review on the case. I received it 9/16/2015 and promptly installed it. This review will be updated for 7 days.**
I have previously used ZeroLemon products for my Galaxy Nexus, Galaxy S4, and my girlfriends Nexus 5. I have found that the internal replacement batteries are much better than the externals, but the external ones come with cases that may actually give your phone a chance to live during a drop. I have so far enjoyed all of my ZeroLemon products.
9/16: Received ZeroLemon slim power case in the mail and installed it immediately, replacing my SUPCASE Unicorn Beetle Pro.
The first thing I notice was that this case literally doubles the thickness of the phone. Not only that, but it adds nearly half an inch to the bottom of the phone below the speaker. The battery included in the package fits very will in the case, but I'm still a bit shocked that ZeroLemon thought 3500mAh was enough.
The case comes with a Z-shaped connector to keep the phone and the battery connected, and allows pass-through charging via a micro-USB port on the left side of the phone. There is also a decent sized cutout on top for the 3.5mm jack, though they decided to include a 3" 3.5mm extension with the case.
To turn the battery on, you hold the power button on the back for a few seconds and you will have confirmation by your phone beginning to charge, as well as 4 blue LED lights on the back of the case. This works exactly the same as all of their other cases for phones with non-user-replaceable batteries.
First impressions:
-This thing is big. It's got a nice weight to it and makes it feel solid. Fits well in my hand (I have fairly large hands for a 25 year old male).
-The power and volume buttons are EXTREMELY SENSITIVE. I can't tell you how many times I have accidentally pressed something when just picking the phone up.
- No Qi-charging. Unfortunately, ZeroLemon does not give us a Qi capable battery, and the case is so thick that even a 3-coil charger will not penetrate it. (Now I have 2 nice Qi chargers that I can't use)
-No Quick Charge 2.0. This (as well as not having Qi) was a real bummer. ZeroLemon had previously sent me one of their Quick Charge 2.0 chargers, but it seems that it is now useless as you are actually charging the external battery, which in turn charges the phone.
-Single piece construction. The case itself feels solid, but I was hoping that it would be more like the one for the Nexus 5 that was 2-piece and had a plastic screen protector.
They really needed to include a belt clip with this case. It's that big. Because of the size and the buttons being so sensitive, I can't really carry the phone in my pants pocket. When I put it in the breast pocket of my shirt, half of the phone sticks out, and the thickness almost prevents it from sliding in at all. Not including some sort of belt clip was a very poor idea.
9/22:
So I've been using my ZeroLemon SlimPower case for about a week now.
More things of note:
-NFC does not function with this case on
-Full charge of the battery in the case gave me about 40% charge (went from 30% to 71%)
-Buttons are WAY too sensitive. Just from being in my pocket and walking around, My battery life has been terrible (screen keeps turning on and off)
-The case does not do a very good job of protecting the phone. The two times that my phone fell (once from the arm of the couch, the other from the coffee table), the case literally just popped right off. A case this large really needs to be 2-stage or have some way to hold the phone in better.
-My cullular signal also seems to be hindered with this case installed. Where I would normally have a little bit of service at my office, I have no connection with this case on. Immediately when the case comes off, I have service again.
-Have had the phone randomly restart on me 3 times since having this installed. Never had an issue with this before.
All of my initial impressions stayed with me the entire time using this case.
I can see times where having the extra battery could be useful, but honestly, you are better off getting an External battery for the same price as this case or likely even less. Unfortunately, I cannot recommend this case.
keep a eye out for reboots, mine would reboot several times a day when i was using my case. i absolutely agree on the case needing a holster. its like having a vhs tape in your pocket, the over sensitive buttons was a big problem as well. i took mine off as im in meetings the rest of the week so its def overkill. got a 14 hour mountain motorcycle ride sunday though
forsaken82 said:
keep a eye out for reboots, mine would reboot several times a day when i was using my case. i absolutely agree on the case needing a holster. its like having a vhs tape in your pocket, the over sensitive buttons was a big problem as well. i took mine off as im in meetings the rest of the week so its def overkill. got a 14 hour mountain motorcycle ride sunday though
Click to expand...
Click to collapse
Yeah I am going to give mine a week of testing and updating the review. Before deciding if I will continue using it or not.
I just ordered this. Excited for it to come in and see how it goes.
How's it so far ?
Sent from my Nexus 6 using XDA Free mobile app
My brother just got it and seems the buttons on the vase are too sensitive. Expect your phone to turn on easily and if u hit power button it also hits the volume buttons at the same time
Sent from my Nexus 6 using Tapatalk
I've had mine a couple weeks. Haven't needed to use the battery too often but also haven't really been able to because it takes so long to charge both the phone and the battery I seldom manage to fully charge it. I hated how much it screwed with my ability to screenshot so I cut a strip out to expose my buttons lol. When I used AOSIP screenshot was built into the power menu but I'm on Chroma Marshmallow now. Good news is battery life is so solid now that I may not need the case after all. I'm looking at over 6 hours on screen with the ROM, Hells Kernel and Greenify and it hasn't even had the chance to optimize apps yet
zerolemon sent me a review unit that ive been using when needed for a week or so. its not something id use all of the time due to the size, but overall im very happy with it. it is a brick, but surprisingly comfortable to use in the hand and doesnt feel too bad in my pocket all things considered. it charges my phone while im still using it even though it doesnt support qc, so thats a big plus in my opinion. on days where i know i wont be near a power supply ive brought this with me and its much better than bringing an external battery pack imo. phone seems to slide down just a hair in the case as sometimes when i hit power it actually activates volume up, but thats not too often and easily fixed. i would definitely recommend if you need the extra juice.
I took a knife and cut out the buttons and now they are perfect. Unfortunately when I put this case on, it makes my tempered glass nillkin screen protector get some lift on the edges (which it never has when the case is not on). So I don't use it now. I have it for a backup case for trips to keep extra juice, but honestly with Android 6.0 the battery life is so much better now with doze, this case isn't really needed as much.
I tried this case and returned it to amazon. It is very poorly designed.
It's literally one giant piece of rubber. No way to secure it to your N6, so it falls out when tossed on the couch! What a horrid design flaw!
The battery also constantlyrubs against the back of my N6 and made a few scratch marks after only a few weeks of use! There is also a ton of space left in the back, ZL should have gone with a much higher capacity battery for a case that thick.
Hate this case, absolutely hate it. Coming form three past ZL cases, which were all great, this one feels incredibly rushed.
Broke down and bought this case..straight garbage will be returning mine .zerolemon should be ashamed to sell this product
Sent from my Nexus 6 using XDA Free mobile app
So update after owning this case for a while. Seldom had the chance to fully charge my phone as well as the case. Wasn't really worth it, with Chroma Marshmallow I'm averaging 6 to 7 hours of SoT now so it was more of a waste not to be able to fast charge honestly. When i had the ZL case on my Nexus 5 it was way more worth it. At least I could pull out the plug and charge both batteries at the same time. Took the case off today, ripped the screen protector off my Supcase and put that back on.
So to sum it up, battery is too small, buttons are so bad I had to cut them out, and for someone who doesn't sleep 10 to 11 hours a day or sit at a desk all day with their phone plugged in, its pretty useless
I'm actually considering buying a Note 4 and slipping on a Zerolemon 10,000 case. Just need to figure out what the best ROMs are and if it would be worth it. I'm tired of seeing manufacturers phase out removable batteries
From the moment I saw that case, I knew it was gonna be rushed garbage. Pathetic move from ZeroLemon. But can't blame them as much as phone makers that make non removable batteries
Better get used to unibody phones and honestly when I can charge my phone as fast as this one charges, extended battery isn't necessary for daily use.... PS...greenify.
Sent from my Nexus 6 using Tapatalk
No thanks. I'll be switching to LG for removable batteries. Besides, quick charging or not, not everyone can easily access a charger. Especially in my case being overseas
I'm a little surprised by all the negative reviews. I've been using this case since it came out and it's been totally fine for me. Granted it's absolutely massive but serves it's purpose. My phone has never popped out of it and haven't had much by way of random reboots. It has definitely gotten me through some tight Jams but yes, as stated above the buttons are extremely sensitive.
Sent from my Nexus 6 using Tapatalk
I think people just expected better from ZL based on past experience. I own the Note 2 and 3 batteries. They were excellent, well designed, made good use of space. This one looks rushed, and doesn't make good use of space, for a small increase in capacity. Well, small by ZL standards anyway. To be fair, they are somewhat limited by the design of the Nexus 6. The non-removable battery makes their standard methods impossible. That is unfortunate, I would absolutely buy a Note style battery from them. Having 20+ hours SOT available was exceptional. If they had supported quickcharge on this one, I probably would have still bought it.
At this point, I'm just hoping Sony makes a good device next year that is available from T-Mobile (Jump). With their open source support, if they keep removable batteries and SD, that would be a killer combo.
If you think this case is tolerable then you must not screenshot often
thanks
thanks
Ugliest thing I have ever seen. It is more of a punishment to use this case than a benefit.