Hi Forum
I have have updated to o2 2.2 Froyo & still im unable to get my bluetooth headphones to pair to my Dell Streak .
i have tried headphones on other phones and they pair straight away
is there anything i can check or install so i can get it to work as Dell just say send it back .
I have the phone rooted as if i don't like the Dell official update will go to Steves
I'm hating the Stage ui don't know whos idea that was,need to look into changing it but bluetooth issue is just a real pain
Thanks
Only thing i can suggest is a Factory reset if still no good then reinstall the ROM
Sorry, can't help you, but got a little longer. I haven't succeeded yet in making a bluetooth phone audio connection with my Streak Android 2.2. Paired but not connected is the message. It connects with the headset for media audio but not for phone audio. Tried with different headsets. Mostly if I try to connect to the phone audio in "options" the app crashes with the message "The application closed unexpectedly....." "system exception....". I just won't work. I know I'm not the only one with the problem. Has someone an answer?
Bluetooth connection solution
Well, then I finally had to do a factory reset. The connection problem is solved and maybe can solve others. Because I downloaded a reboot-app and used it, the Streak didn't want to start any longer. I had to do the factory reinstall (press both the volume down and upp buttons and at the same time also the power button, keep holding until you see text, choose factory install). After that the bluetooth connects fine. It's a lot of reinstallation, but it worked. With the help of Dell Backup most of the configuration/apps can be restored.
Related
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
paperuccio said:
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
Click to expand...
Click to collapse
Why not email the author, he is most helpful.
Had the same issue with the Parrot. My Plantronics headset works a treat, but not the Parrot.
I mailed the author who confirmed there are some problems and a new release will be needed.
As the author is doing this work unpaid and the functionality is so good, I can wait.
@ mrg2003
I send an e-mail some days ago but still had no response.
Anyway, I agree with IanF and I'll wait for the new release.
I wish I read this bulletin board more often.
Yes, I have exactly the same problem with the CK3000 (v3.13) and PBT. HBH-35 works a treat but CK3000 does not bond (XDA thinks it does but there is no handshaking and CK3000 repeats request to bond).
Back to basics again ...
Incidentally, does anyone know if Tobias plans to engineer a way to trigger Voice Command and take input from the car microphone for voice recognition? Would be the dogs and well worth a major donation ....
Cheers
I've had some problems with pocket bluetooth. I have emailed tobias as follows and am awaiting a reply. Was wondering if anyone has faced similar problems:
Tobias,
Thanks for all the hard work in getting these tools working. I have just bought an XDAII with the latest 1.60.00 ROM using the 1.10.00 radio version.
At the same time, I have a WIDCOMM bluetooth dongle on my PC which supports numerous profiles including the headset profile, which allows me to use the PC's speakers and mic as a 'headset' with the XDAII.
I set up the XDAII with the PC, using the built-in bluetooth bonding and pairing application and managed to get it all working fine with the PC using the speakers and the mic as the headset, with the phone automatically transferring the call to the PC when the 'Bluetooth Headset mode is enabled' shows on the today screen. Furthermore, activesync also seems to work fine too.
After installing Pocket Bluetooth Tools, the headset stops working. Before installing it, I unpaired the device by deleting it from the list of paired devices. After installation and going through the process of pairing the device again, it correctly gives me the option to choose the Serial Port, ActiveSync, Modem, and Headset profile. I select all of these and click on OK. Once this happens, my PC gives me a message saying that the XDAII has connected with the headset. However, this doesn’t happen once but goes into a continuous loop giving me notifications every 2-3 seconds that this is the case. Furthermore, when making a call to see if the voice has been transferred to the PC< this stops working and the XDAII's speaker and mic continue to be used. The only way to stop the constant loop of connections is to switch off the bluetooth radio on the XDAII. Furthermore, when deleting the pairing from the XDAII this constant loop continues.
Have you faced this issue previously, as I think it may be a bug. The only reason I installed pocket Bluetooth is that my current b.tooth headset is a Nokia HDW-30 that supports the handsfree profile and your documentation states that Pocket Bluetooth tools supports this profile.
Let me know if there is a fix for this.
pap[/quote]
Why not email the author, he is most helpful.[/quote]
maybe just because he doesn't answer
i wrote a very long report some days after the long awaited new version came out in april, but haven't got any reply. (maybe my email got lost - who knows ...)
i have exactly the same problems. i also have a parrot ck3000 (tried with firmware 3.11 and 3.13) and an mda2 with rom 1.6.00GER and extROM 1.60.07. the two devices pair, and sometime i can even select the "headphone profile" afterwards. i even managed to make it work ONCE, after several hours, of installing, reinstalling, pairing, reparing, ect, ect ...
what did work once was making calls. but after the first call came in, i could answer it, the caller could hear me, but i couldn't hear anything. this happened twice and then i just turned off bt and used the mobile as always.
as i'm using my mda in my car for work and not for fun this is no solution for me . i went back to the original bt stack that works quite well. i can make and take calls w/o any problems.
one thing i'd like to see changed (as soon as parrot and mda work together) is, that ALL calls are made via the handsfree, as, as long i'm in the car it HAVE TO use the handsfree by law (and it's much more comfortable anyway). it's not practicle to dial with the mobile, and then by pressing the green button on the parrot to move the call to the handsfree. but that's the only way you can do it when using speeddial.
another thing i desperately miss is a way to change the volume of the handsfree. i could do this using the volume slider of my nokia 6310, but volume stays all the same when using the mda. and it's just too low when doing higher speeds on the autobahn
of course voice dialing would be a great feature to have ... but it's not that necessary.
please don't get me wrong .. i'm don't want to be ungrateful as i'm not paying for this software - i just want to help ppl by saying that they are not alone with their problem and they should give up wasting their time and better wait for a new release....
and of course i'm very willing to PAY for that software as well as soon as it is any improvement over the original bt stack (for me of course. for most of you it already is)
maybe TOWA could say some words here. that would be really appreciated.
thanks anyway a lot to all ppl that spend their free time developing software and providing it to the comunity!!! thumbs up !
regards ize|man
Bluetooth tools and ROM 1.72
Does ROM version 1.72 require TOWA's bluetooth tools? In this ROM, there are options for COM port selection etc under Bluetooth settings and the clubimate site mentions bluetooth improvements. Anyone with this info?
other com settings then
Inbound COM port com4
outbound COM port com5
??
if so what are they?
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
faisal said:
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
Click to expand...
Click to collapse
These are the ports for BT beaming, as I understand! (not for BT GPS).
For BT GPS you do not specifically need BTHTools anymore (since 1.66) because WM can install a BT GPS com at first bonding.
Something is different however (vs BTHTools) since with 1 application (Alturion) I can not get the BT GPS working anymore, which can also not be solved by still installing BTHTools!! (while I have no problems with my other application TT. Figure that out?!)
Ronald
I now have the same problem, the parrot ck3000 was working until I insatlle dthe bluetooth tools, and now it doesn't.
Its a shame I did not see this thread before
Will the 1.72 rom work with both parrot and my emtac bluetooth gps?
Cheers
Justinp
justinp
have you tried uninstalling Bluetoothtools?
no not yet, I might give that a go, but then my gps wont work :?
justinp said:
no not yet, I might give that a go, but then my gps wont work :?
Click to expand...
Click to collapse
I think it will still work!
With my working application (TT3) I see the GPS on COM5 (installed by WM) + on COM7 (installed by BTHTools) + on the BT/SIRF interface!
If I uninstall BTHTools I only loose the selection for COM7. The other two selections still work!
Of course you must have acknowledged the WM com installation with first bonding (in any case for the serial operation)! My BT/SIRF connection always works in TT3 regardless of WM/BTHTools installation of serial ports.
Ronald
I'm also having that strange problem with the parrot CK3000. I did install the previous version of BT but I don't see any difference with or without BT. But when I de-install and want to go back to the original state, the same problem persist. Is there any way to download anyware the original Bluetooth stack without re-install everything (and loosing all my settings and software)?
Thanks for helping out.
Frank.
Is it possible to put the old android 1.6 bluetooth control into a nexus ROM?
My G1 worked great with my car's built in bluetooth system, but my N1 wants to be a PITA. It refuses to stay connected, it is constantly disconnecting and reconnecting, disconnects after about 30 seconds and reconnects a couple minutes later and then repeats this cycle. (I know this because my car tells me audibly every time this happens) It also will not transfer audio to the system, or the system voice controls will not answer or start calls even when the phone and system show connected (the brief times that it does show connected). That fact makes me wonder if the bluetooth audio problems others complain about is the same issue I am having, and that their phones are not connecting properly as well. I think the issue may be caused by how the N1 treats phonebook access. With the G1 I would get a "connection complete" message when the bluetooth connects and a "transfer complete" message when the phonebook access completes. I never receive the transfer complete message for the N1
The real crazy thing is that I can get it to work if:
I do not have the phones bluetooth turned on
I then get into the car and start the car (its bluetooth then turns on)
I then turn on the phones bluetooth (if the phone does not connect to the system immediately I click connect manually)
I then must make a phone call within just a few seconds after the phone connects
After that everything works as expected. I have found no other combination of turning on or off bluetooth on the phone or car system that also works.
I was having problems with my car audio as well, until I updated to Cyanogen's latest. Everything seems to be working quite well now. What ROM are you using???
Stock ATM. The N1 is good enough stock (as opposed to the G1) but for the lack of free tethering. I'm sure it can be even better though. Staying connected to my cars system seems to be my biggest issue, audio works great when I get it to connect properly.
if got the same issue on my parrot.
but the problem still persists on the latest cyanogen mod
Yeah, I don't know what it is that is different in 2.1, but 1.6 works great with bluetooth.
I don't guess its possable to do, I hope an official fix comes soon.
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
I just purchased a Sony H/U for the car.
The phone is found with no problem, but no matter what I do I cannot get sound to come out of the H/U when using B/T or USB, playing music or using the phone handsfree.
I have 2.2.2 installed on the phone, Build 15609, OEM GAUSB1A135100.
I have a B/T earpiece that works properly. I made sure it was disconnected in case there was some kind of interference but that didn't help.
Anyone have any suggestions as to where to start?
The automatic search came up with nothing for the Streak when I started the thread.
I haven't used bluetooth much on this phone yet, so I don't know if this is device specific or a general problem. Anyway, my phone pairs with my car bluetooth dongle and works normally the first time, but when it's already paired it just won't connect, no matter what. It works again if I unpair it and pair it again, but that's not very convenient...
Has anyone else noticed this kind of behavior and is there a fix for it?
Try clearing the system cache and a network reset.
Well, I don't know what happened or changed but today it just worked... Weird.
Ah, turns out with this phone, I just need to wait until the dongle is properly initialized before trying to connect, otherwise it just gives up and won't even try again.
With my old Huawei, I could do it straight away and it would connect when it's done...
mcfox_1 said:
Ah, turns out with this phone, I just need to wait until the dongle is properly initialized before trying to connect, otherwise it just gives up and won't even try again.
With my old Huawei, I could do it straight away and it would connect when it's done...
Click to expand...
Click to collapse
Try in safe mode. May have a 3rd party app conflict.
Could also be a coincidence and the crappy dongle is giving up.
It's a cheap eBay bought one that renders an mp3 file on the fly so the car stereo can play it like normal flash storage. My wife's Xiaomi also had some issues connecting to it yesterday, and today as I was driving music stopped several times and the stereo said "USB format incompatible", then skipped to the next track and continued. I'm planning on installing an Aux input into the car soon so I can plug a better bluetooth receiver into that, so hopefully that'll solve the problem.