Hi, guys.
My phone has been updated this week via lg official updater and I can't seem to root this thing using simple means. I've used superoneclick, z4root and rageagainstthecage (including manual adb method and gui).
Hope people can help. The firmware in suspect is V10E_00.
Thanks in advance.
Sent from my LG-P500 using Tapatalk
I have this problem too. I updated using the LG update software and the software version is now V10E-NOV-30-2010, and the android version is 2.2.1 build FRG83.
We need help. Thanks in advance.
same here
..after official update to 2.2.1 i can't root LGP500 (i've tried: superoneclick, z4root, universalblabla, rageagainstthecage gui..etc)
before the update my phone was rooted with no problem
Solved?!
Hello,
Guys, even me.. after an official update nothing worked to root my O1 (z4root, superoneclick, etc...) so what I did is downgrade the ROM to 10a but nothing to do.. still the same untill I found this topic http://forum.androidcentral.com/lg-optimus-s-roms-hacks/43108-how-root-lg-optimus-s.html - follow step by step instructions and you'll root your P50x. It worked for me.. hope it will work even for you.
Cheers.
nope
Sorry zeule but this is not worikng on V10N (FRG83).
After runing ./rageagainstthecage (a milion times..) the phone must be restarted in order to run adb again....
no # only $
thx anyway
Hard little FW
radub said:
Sorry zeule but this is not worikng on V10N (FRG83).
After runing ./rageagainstthecage (a milion times..) the phone must be restarted in order to run adb again....
no # only $
thx anyway
Click to expand...
Click to collapse
Guys, if you want a rooted phone, in this case downgrade the firmware.. it's easy, I rooted the phone and installed a custom ROM.. much better than the standard.. even rooted standard ROMs do suck
It's just a matter of taste. One minus is that branded ROMs use more resources (sometimes a little, other times many (like HTC sense)).
zeule said:
Guys, if you want a rooted phone, in this case downgrade the firmware.. it's easy, I rooted the phone and installed a custom ROM.. much better than the standard.. even rooted standard ROMs do suck
Click to expand...
Click to collapse
I understand that Zeule, but if there was a way to directly root this (without having to go to flash back to v10b then install custom recovery, then flash to custom ROM), that would be great.
I don't want to set everything up again: contacts, customizations, etc...
@ameragorn: I've downgraded to v10b before. My contacts and other customizations weren't altered in anyway. It's only when using custom roms that they were lost since it was expected from the data wipe. The good thing is that I had the forsight to sync my contacts with a gmail account I set up just for contacts. You can go back to v10b to get root access or you can wait for a successful method to be devised for rooting v10e.
Easiest way for me to back up contacts and also existing messages is by using MyPhoneExplorer app. Just do a backup there, and once you wiped everything out, just restore it in your phone. No hassle at all.
warfab said:
@ameragorn: I've downgraded to v10b before. My contacts and other customizations weren't altered in anyway. It's only when using custom roms that they were lost since it was expected from the data wipe. The good thing is that I had the forsight to sync my contacts with a gmail account I set up just for contacts. You can go back to v10b to get root access or you can wait for a successful method to be devised for rooting v10e.
Click to expand...
Click to collapse
exactly. flashing to the custom rom will wipe some stuff out. i'm not just referring to contacts, included are messages, customizations i did re-arranging the apps on the menu w/ categories, not to mention data on my apps...
i'll wait around for a successful method of rooting this as it is. same goes when gingerbread comes.
thanks to all who suggested going to custom ROM, i just prefer not to go that route.
ameragorn said:
exactly. flashing to the custom rom will wipe some stuff out. i'm not just referring to contacts, included are messages, customizations i did re-arranging the apps on the menu w/ categories, not to mention data on my apps...
i'll wait around for a successful method of rooting this as it is. same goes when gingerbread comes.
thanks to all who suggested going to custom ROM, i just prefer not to go that route.
Click to expand...
Click to collapse
one-click rooting will not work...you need to do manual rooting. Mine updated to v10e but since i was using custom rom it did not affect my device being rooted.
Asuma06 said:
one-click rooting will not work...you need to do manual rooting. Mine updated to v10e but since i was using custom rom it did not affect my device being rooted.
Click to expand...
Click to collapse
manual rooting (via adb) doesn't work either.
How to downgrade the firmware? I'm stuck with same problem as well
Use KDZ_FW_UPD tool
http://forum.xda-developers.com/showthread.php?t=875881
The_ERROR said:
Use KDZ_FW_UPD tool
http://forum.xda-developers.com/showthread.php?t=875881
Click to expand...
Click to collapse
Sorry but thats not working... :S
The_ERROR said:
Use KDZ_FW_UPD tool
http://forum.xda-developers.com/showthread.php?t=875881
Click to expand...
Click to collapse
I'll try this later as I arrive home.
It's good that it will be my restday starting today.
Whew! It's really hard working in graveyard shift. I can't flash my unit in the office due to restrictions!
Related
So, I am new to this site and to the android community. I apologize if I sound stupid to any of you but if you aren't going to help I'd appreciate it if you just ignored me.
Anyway, I got my Atrix a couple days ago on AT&T and started learning about rooting and such. Everything on it is still stock, last night I upgraded to Gingerbread from Froyo and I'd just like to know if there's any specific rooting program, method I can use right now for 4.5.91 Also, when I upgraded I lost my music player widget, is there I can get it back without going back to Froyo?
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
will there be any severe consequences if I screw up?
Use gingerbreak.
Sent from my MB860 using XDA App
TheToiletSpaula said:
Use gingerbreak.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I've read that gingerbreak doesn't work with this version. I'll look it up though.
phobos512 said:
follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my mb860 using xda app
Click to expand...
Click to collapse
^^^^^ only way to root gb and probably the best way if there are other methods
savier420 said:
^^^^^ only way to root gb and probably the best way if there are other methods
Click to expand...
Click to collapse
cool, just one question. Am I supposed to have the device connected to my computer the whole time? and if not between which steps should I connect/ disconnect it? also, when I put the root.img in the C: folder, do I put the zip file or just the .img inside of it?
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
PSY0NIC said:
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
Click to expand...
Click to collapse
Since this is the 1st time I've seen some one say it this way....
If you are just trying to "root" your phone only, YES, this is the best method.
Brand new phone, all stock... just want root.... use gingerbreak?
Sent from my MB860 using XDA Premium App
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
hambone123 said:
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
Click to expand...
Click to collapse
I'm about to try it but I'm still confused about a few things like when exactly to connect or disconnect my phone and what to do after I've entered all the commands on my computer, will it install by itself? This is my first time rooting a phone, and my first time even owning an android so I want to make sure I know exactly what I'm doing
I hear you man, it's nerve wracking to worry that you're going to brick your phone. I did the gingerbreak on the last release and it worked perfectly. I'm sure this method will work fine as well, as you said I just want to be sure I'm doing the right thing for my goal: stock phone/downloaded updates/rooted. Best of luck, and thanks to anyone who gives us noobs some more reassurance.
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got, before i updated to the OTA GB i had BL unlocked and rooted, just flashed back to 1.2.6 to be rid of root and unlocked BL, then just went throught the OTA updates to get to GB and im loving it, dont really care to flash any other custom roms, BUT BEWARE DOING THE OTA TO GB AND UNLOCKING THE BL THEN TRYIN TO FLASH BACK TO A STOCK ROM WILL HARD BRICK SO DO YOUR RESEARCH so if u dont want a hard bricked phone dont do the ota stick to custom roms and ignore all OTA'S
so I got through the fastboot reboot command, phone booted back up automatically, then put the phone into debug. Then typed in the adb shell code and said the specified path could not be found.
Now I was still in the command prompt that said the c:/root
What did I do wrong?
So, adb says it is a bad path?? Do this instead..it is easier and it works -- I did it this way last night!
After "moto-fastboot reboot", once your phone has completely rebooted, go to the Android Market and download and install "Terminal Emulator." Once it is instslled and you have opened it, enter the EXACT SAME commands that you were going to type into the Adb Shell..once again, type in the commands VERBATIM. After the last command, there should be a message saying (in terminal emulator) that it was successful! Congrats, you have achieved root access on the AT&T issued stock Gingerbread 2.3.4 build! I hope it works for you!
~Eric
savier420 said:
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got.
Click to expand...
Click to collapse
I'm very vanilla. I root pretty much entirely for free wireless tethering and being able to delete bloatware.
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
aroca1978 said:
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
Click to expand...
Click to collapse
Updating to GB won't brick your phone. After updating to GB you can't down grade to older OS (like the one your on right now) that would brick your phone. So as long as you don't plan on going back to a past OS version (and I don't know why anyone would) you'll have no problems at all. As for Rooting >follow this link< and follow the instructions there after you update to GB. It works perfectly, you don't have to unlock your BL or anything else like that to just have Root on GB. Hope this helps.
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
For Questions about BL Unlocking
aroca1978 said:
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
Click to expand...
Click to collapse
Click on the link below, that thread will give you the answers and files your looking for.
> Click Here <
Have searched the threads and did not come up with anything pertaining to unlocked Gtab that seemed to clearly explain( to me) what the easiest methods are to root and apply CWM. The one I did find I found confusing. I am also considering just installing CWM recovery and then installing the new rom with the Touchwiz update which is also rooted. Is this possible to do and what would the easiest method be for installing CWM(I am familair with Odin and remotely acquainted with Nvflash. I would prefer Odin if that is feasible. I found a thread that was for the locked version but am hesitant until I find out for sure that it also works with unlocked device. Also is there a downside to just installing CWM and then having custom rom root the device? Any and all help is greatly appreciated!!!!
watch this
http://www.youtube.com/watch?v=krQDP7xYlWg
download the files in the description
it takes 2 min
when you're done install ROM Manager,
do a nandroid backup if you want and
install the Touchwiz ROM,
after that do the root procedure again if you want root again.
jeandujardin01 said:
watch this
http://www.youtube.com/watch?v=krQDP7xYlWg
download the files in the description
it takes 2 min
when you're done install ROM Manager,
do a nandroid backup if you want and
install the Touchwiz ROM,
after that do the root procedure again if you want root again.
Click to expand...
Click to collapse
Thanks so much!!!!!!!!!!!!!!!!1 I will try this. Just one last question, if I restore the backup I make before flashing the rom, would I be able to get OTA for official TouchWiz? Or would I have to restore the stock recovery as well? Thanks again!! I hit the thanks buttom as well....
Hmmm that we dont know yet
but i believe the Aug 3 files will be available here before everybody receive the OTA and it my be the same version that T3rabyte received
jeandujardin01 said:
Hmmm that we dont know yet
but i believe the Aug 3 files will be available here before everybody receive the OTA and it my be the same version that T3rabyte received
Click to expand...
Click to collapse
Ok thanks and I hit the thanks button!!!
When installing the T3rabyte version will all of my installed apps and data still be available or do I need to reinstall everything. Sorry for such a newbie question but it would be a pain to have to reinstall all apps. I assume the OTA would not do a complete factory reset?
Hey, there seems to be a few of us(or maybe it's just me) confused about how we can root after the new update.
I just wanted to know if there was a confirmed safe way to restore root.
Thanks
Update:
Thanks to superkev. Manual way works. I can also confirm it also.
Also remember to keep your phone awake (ie. not in the locked screen)
superkev said:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
Click to expand...
Click to collapse
I can't seem to find any root information on bell atrix 2.3.6 either.
saw some unconfirmed reports that superoneclick worked, but it doesn't work for me just sits at "Failed to set prot mask"
and then "WaitforDevice" forever...
if anyone has legit root info for the bell atrix 2.3.6 posting it would be greatly appreciated.
All I want is to install it! But im in usa so I need someone to make a fruitcake of it for me. Oh and I have also read super one click is supposedly working for some.
Sent from my MB860 using Tapatalk
I've got super one click working but superuser keeps denying all my root permissions without giving me a prompt.
DANGER!
So I tried SuperOneClick 2.3.1 and got my Bell Atrix 2.3.6 rooted.... all seemed good and Root Checker told me I was rooted. Light Flow got Super User permission and I thought I was gold!
Then my phone started freezing up and rebooting. Now I can't use the phone because it is crashing every 30 seconds. I would say avoid SuperOneClick (at least this version) for now!!
Oh, and SuperOneClick won't unroot my device so I'm kind of stuck. I would rather not reset my device and have to reinstall all my apps (which are backed up with Titanium Back-up, but which of course needs root to work...).
I'm just trying GingerBreak to unroot so we'll see how that goes.....
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
... OK... so GingerBreak unrooted my phone but it is still completely hooped and the crashing woes continue... anyone with a solution on which system files I might be able to replace to fix this?!?!?
Aaaarrrg!
I tried wit Pete's first and it failed but super one click worked right from the first attempt. Before doing that though, I did a factory reset and started from scratch. Then I restored my apps only with TB. All is OK except that in market my apps list is empty with a message saying that my purchased apps will appear here. I have read that it is a known problem, but not necessarily with this update or because of rooting. In my experience super one click has otherwise been OK. Hope that helps. Don't have a solution for you except maybe trying to do a factory reset first if you are able to and then try again.
Sent from my MB860 using xda premium
Hey thanks. Yes, I ended up having to do a reset from the boot menu (power+vol down) and do an 'Android Recovery' which apparently wipes the system files and reinstalls the OS. My TB backups are still sitting on the internal SD but I am hesitant to re-root so I can reinstall TB and restore... what build of SuperOneClick did you use?
I tried with SuperOneClick 2.3.1.0 (latest). It says that it worked, but even after rebooting, my apps are being denied root access.
UPDATE:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
I just updated to 2.3.6 and used the Briefmobile method to root and can also confirm that it is working. I had previously used this method to do 2.3.4 and had no issues on 2.3.6. Cheers
I might caution those who are not on AT&T about using the "manual" root method from BriefMobile. It was built with AT&T 2.3.4 files. Flashing the root.img in fastboot flashes those files to your /preinstall folder possibly hosing your Bell specific files. This has in the past, and possibly could in the future cause issues when trying to install future updates.
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
superoneclick 2.3.1.0
this works flawlessly and on first attempt. so easy!
gingerbreak 1.2 didn't work this time, but it was useful to me for unrooting.
just make sure you do that before installing the update, and follow the superoneclick instructions.
too early to comment on battery life, and other than the keyboard I don't notice any aesthetic changes.
bell atrix
Remember to flash back the original preinstall image to avoid update issues.
Cheers!
das8nt said:
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Click to expand...
Click to collapse
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
superkev said:
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
Click to expand...
Click to collapse
Good deal. I had to help a few revert that folder when updating from 2.2.2 to 2.3.4 due to missing the gameloft stuff, but if it didn't effect your update that's good news.
Just in case, here's the 2.3.6 Bell stock preinstall.img to flash via moto-fastboot (thanks to NFHimself's new Gobstopper): http://www.megaupload.com/?d=C098P9IV
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
I used the manual way to root with the 2.3.6 update but TB is saying it can't can't gain root access and su keeps fc'ing on me. Anyone have any ideas what could be causing this? I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
j7logan said:
I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
Click to expand...
Click to collapse
that's weird. you definitely don't need internet access to perform the root (i was offline), provided you have superoneclick and phone drivers installed i'd say. does the driver check feature complain about it too?
Yeah, i thought it was strange too. It doesn't give me that error with the driver check, only when it is going through the install process of the exe.
Sometimes you need to treat your phone like a computer when it starts acting weird, save yourself some hassle and just do a format/factory reset and start fresh.
i used Doomlord's Rooting Toolkit: http://forum.xda-developers.com/show....php?t=1319653 it worked in 30 sec
Link to the exact Superoneclick you used? I tried the Doomloader link but it's broken.
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Same question here, thanks
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
gnahc79 said:
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
Click to expand...
Click to collapse
ok so now I screwed up and I am getting
svf 108 1:2
failted to boot 3
You got a failed to boot 3 using the fastboot preinstall method?? At which step did you get the error
Sent from my MB860 using XDA App
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
[Q] rooting help on 2.3.6
what is the proper way to root without unlocking the bootloader on 2.3.6 att?
http://briefmobile.com/motorola-atrix-4g-root
It still works
hdblab said:
http://briefmobile.com/motorola-atrix-4g-root
It still works
Click to expand...
Click to collapse
+1
Sent from my MB860 using XDA App
Root 2.3.6 one click
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
http://forum.xda-developers.com/showthread.php?t=1505900
http://forum.xda-developers.com/showthread.php?t=1502735
http://forum.xda-developers.com/showthread.php?t=1500819
The preinstall method is real easy. If that is too challenging then maybe you should wait for someone to volunteer to provide a 1-click/batch script on their own rather than requesting(demanding) it.
sillyshyme said:
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
Click to expand...
Click to collapse
I tried that before and I got soft booted.
Try again by using the instructions from the "Android-advice" website.
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Note: In those instructions specifically, it is important clarify that the phone should be in "fastboot" before entering in commands. Basically, do "step 6" before "step 4".
sillyshyme said:
I tried that before and I got soft booted.
Click to expand...
Click to collapse
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
przemeknzb said:
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
Click to expand...
Click to collapse
yes
btw, before you unroot 2.3.4. can you check if you have su, dosu and superuser.apk in /system/preinstall/ ? I'm not sure if I had those files when I was on 2.3.4, but I see them now on 2.3.6. I only removed the su related files as listed in the link when I was on 2.3.4, never removed su, dosu, etc from system/preinstall...guess it's not necessary for the 2.3.6 OTA to be successful on a locked bootloader.
I just rooted my Atrix after the OTA to 2.3.6 using this method. Worked perfect.
http://androidadvices.com/root-motorola-atrix-4g-45141-gingerbread-236-firmware/2/
no not had any of those files
tnedator said:
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
Click to expand...
Click to collapse
1) unroot 2.3.4 first:
http://androidforums.com/atrix-4g-all-things-root/423259-best-way-unroot.html
2) apply the 2.3.6 OTA update
3) redo the fastboot preinstall root method
btw before you unroot 2.3.4 can you check to see if you have su, dosu and superuser.apk in /system/preinstall? I see it now in 2.3.6 and am not sure if I had it there back when I was on 2.3.4
I didn't unroot before updating to 2.3.6 and now I can't get it to work. I keep getting the error "cp: write error: No space left on device", what should I do now?
Thanks.
sillyshyme said:
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Click to expand...
Click to collapse
what i did ...
UPDATE FROM STOCK 4.2.91 UNLOCKED BOOTLOADER AND ROOTED ATRIX 4G
try using OTA keeper from the market , before trying the OTA update , this is what i did
1 ) i unlocked my atrix 4g (2.3.4 all stock) with AUTOMATIC_UNLOCK_V4.2 and rooted with PetesMotorolaRootTools_v1.07 after that i installed CWM recovery
2 ) Make a Full backup of you rom using CWM and Titaniumbackup (never is enough)
3 ) MANY people say that using RSD LITE is not good , i just take the risk , because anyways the touch of my atrix is not doing good so i will be sending it to warranty soon anyways , i take the risk , i flash my atrix with RSD Lite 5.5 and this sbf
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
i don´t know any other people but i did not loose any data or apps from my atrix it was everything there , unlocked sign erased , CWM recovery partition erased , ROOT was there it is like everything go back to stock ... almost everything my data part was untoched.
4 ) download from the market OTA Root Keeper make a backup of your root and then press unroot temp
5 ) with that done I started to download and install the OTA update
6 ) after this point the phonewill reboot to stock recovery mode and start to upgrade it took almost 10 min to do the update after finishing copying files, it restarted 2 times on the moto logo then started booting , it take a longtime to pass the att boot image be patience mine took almost 5 min after that the phonestarted with everything loaded my apps , photos videos etc.
I think this could be a workaround (it work for me) for updating to .141 , also the baseband was updated to N_01.77.37P_usa_att
The only thing that was untoched was the webtop part , it stays on WT 1.2, ireally don´t use it , but i think if im already on 2.3.6 i can RDS the full SBF to get Webtop upgraded also the kernel say 2.6.32.9 is that the correct kernel for 2.3.6 i read that kernel is for a Froyo sbf not pretty sure
The thing now is , i wanna try installing CWM recovery and see if im already "unlocked" and try fruitcakes to downgrade 2.3.4 but i am not pretty sure about this i think i will get a brick
Also , you can try investigate to downgrade of wait for a generous dev to take out of the oven the fruitcake for 2.3.6 and try the method above
I TAKE no responsibility with this mini-tuto for anything that could happen to your atrix it on you own do this , i take the risk and it works !!!
thanks everyone
https://doc-0k-1o-docs.googleuserco...009/*/0BzrP5DWIlpplYjFOY1MwOXFNLWc?e=download
here is the ota zip
if we flash this can we flash 4.5.141 with rsd?
any answers?
I wouldn't count on it. The ZIP seems to contain what looks like the bootloader, or at least a piece of it (ap20bl.img). Who knows what might happen after that. Motorola said a downgrade is not possible.
I would just wait for the .145 fruitcake. Then switching back and forth should be safe and painless.
ok thanks for answer
Installed 4.5.145 for fun
blttalas said:
ok thanks for answer
Click to expand...
Click to collapse
I wanted to see for myself the GPS improvements made in the update and sacrificed losing SU/root access to the phone. The update installed without a hitch and left all my apk installed apps alone. I had a handful of apps that required root (e.g. Dropbear II, busybox, Superuser, root explorer, and seeder) and will just wait until someone figures out a new method to regain access again.
sn0wba11 said:
I wanted to see for myself the GPS improvements made in the update and sacrificed losing SU/root access to the phone. The update installed without a hitch and left all my apk installed apps alone. I had a handful of apps that required root (e.g. Dropbear II, busybox, Superuser, root explorer, and seeder) and will just wait until someone figures out a new method to regain access again.
Click to expand...
Click to collapse
Did you do this via the standard update or by flashing that zip yourself?
vikingarcher said:
Did you do this via the standard update or by flashing that zip yourself?
Click to expand...
Click to collapse
Standard
Su ota survival
Has anyone tried to install the update after activating the superuser ota survival option
Root after sys 4.5.145 update?
fdaconta said:
The traditional preinstall method should still work. No wiping happens with that. I used it back when I first rooted my phone, everything stayed exactly as it was (all stock) except I had root too.
Click to expand...
Click to collapse
This response is from the developer thread. I would respond there but the policy for members with less than 10 posts is silly.
None of the existing preinstall methods (e.g. atrix-4g-moto-fastboot or superoneclick 2.3.3) work with 4.5.145.
sn0wba11 said:
Standard
Click to expand...
Click to collapse
Interesting. I tried it with my stock ROM that is rooted and unlocked -- ended up with a boot loop. Decided to flash a new ROM, so switched to the CM10 ROM. That seems to be working well and I think I will just not worry about this update for now.
vikingarcher said:
Interesting. I tried it with my stock ROM that is rooted and unlocked -- ended up with a boot loop. Decided to flash a new ROM, so switched to the CM10 ROM. That seems to be working well and I think I will just not worry about this update for now.
Click to expand...
Click to collapse
Came across a link at Android Central that used Voodoo OTA RootKeeper to restore --> Forgot I installed this awhile back; reinstalling app restored my superuser access
Re-rooted 4.5.145 after OTA
I successfully re-rooted mine last night using the pre-install method.
Read my topic here:
http://forum.xda-developers.com/showthread.php?t=2153422
From 141, to 145, back to 141.... and finally ended up with a working (and rooted) 145.