I have problem with my HTC HD2, it dosnt wont start. It normaly work until resert, then it dosnt wont start, i press buten but nothing, when i conect him with pc or power it turn on, and show htc logo and turn of. I try hard resert, but same situation, i go to Bootloader Mode and say serial
If anybody have any idea I would be very grateful
AND SORRY IN MY POOR ENGLISH
Your English is more than enough to tell us what the problem is. Shame my ability to converse in another language is non existant.
When you go into Bootloader Mode, what else does it say? If you plug the USB cable into the phone and computer, does the 'Serial' change to 'USB'?
What ROM and RADIO did it have on it?
Where you trying to flash a new ROM/RADIO/SPL to your phone?
When i conect phone to pc it only say SERIAL, dosnt wont to change to USB
I really dosnt now what ROM and RADIO did it have on it, becouse i use it one day and that hapend
I somewhare read to i must put orginal rom in it, but i cant find orginal rom for him, i try on htc web page, when i put my Serial Number, it say that i cont
dowload
You may have to plug your USB cable in the back of your computer or try another cable.
If a red LED coming on when you plug in the USB cable to the phone?
The phone may be ROM Locked - you are only allowed to download (from the HTC website) the phone operators version of the ROM. So if the phone is branded Vodafone, Orange, etc then you have to use your serial to download that version of the ROM.
i try 2 diferent usb cabel
red LED dosnt coming on
Its dont wont to chargh
DOsnt wont to start until i connect him with pc or some kind of power, then only start until htc logo and resert, when i go to Bootloader Mode its say serial, its pluged in pc, when i unpluged from pc its turn of
Can it be some kind harver problem or softver
You could always plug your phone into the mains charger, then plug in the battery. It sounds as though the battery is totally flat and the computer USB is not enough to charge it.
Related
From a noobie:
Question 1: My original problem is on soft reset my HTC xv6800 hangs at tricolor with "Serial" at the bottom of screen unless the usb cable is plugged in. It will boot to wm6.1 if I plug in the usb cable at soft reset. Then I get no USB connections in WM61, and my PC does not detect the phone at all at the usb port. I'm stuck with inability to do any sync on the phone.
I am hoping if I install a newer radio ROM it might fix the hang at tricolor with Serial, and usb connection problem. Is this reasonable or do these symptoms indicate something more grave?
Can you recommend any next steps?
Have you tried relocking the phone and flashing back to stock rom? Once you have it back to stock, see if it boots normal. If it does, go thru the steps flashing it back to custom and see if the problem comes back.
BTC
Since I've had the same stock OS ROM and verizon authorized radio ROM for several months, I assumed the ROMs were not the problem. The problem just began last week or so. What I have done is installed neuSPL2.47 wnd reflashed radio ROM and flashed TitanReloaded1.3.2.
I've checked the cable using a different device and it gets recognized by WinXP. I am now syncing with Activesync in bluetooth, and I've flashed both the OS and radio ROMs... With these steps above, is it apparent or feasible that I have a hardware usb issue on the phone?
The only issues I have are that I cannot power up the phone without a usb cable in the phone - it goes to bootloader without the cable plugged in, and I must sync via bluetooth, which is not a huge issue unless I really want to use usb for connection to PC.
Do you still think the ROMs could be the culprit?
Any ideas on why it would go to bootloader with "Serial" at the bottom unless an active usb cables is plugged in? Does anuyone know what the "Serial" message means?
What happens if you plug in the USB cable after the bootloader comes up, does it change to USB or does it keep saying serial.
It does sound like maybe your USB port is bad, if you get it booted up normally, does it see activesync in windows, does your headset work, etc?
Basically, if you use the cable trick to get it to boot, does the USB port seem completely normal then?
BTC
Flash it using your microsd
BillThyCat said:
What happens if you plug in the USB cable after the bootloader comes up, does it change to USB or does it keep saying serial.
It does sound like maybe your USB port is bad, if you get it booted up normally, does it see activesync in windows, does your headset work, etc?
Basically, if you use the cable trick to get it to boot, does the USB port seem completely normal then?
BTC
Click to expand...
Click to collapse
The port seems dead after bootup, once it gets past the bootloader. It never says USB in the bootloader. Should I see that if USB is confirmed functional? What does "Serial" mean? Activesync does not see the Titan whatsoever when using USB connection after it boots. I sometimes get an error popup at the taskbar in WinXP Pro that says the usb device has a problem...
I was trying to upgrade my device and then my PC stop working and reboot. Now My Qtek 2020 is showing Serial v1.02 (if not in cradle) and USB v1.02 (if in cradle) and I cannot perform an upgrade because HimaUpgradeUt doesn't detect the device. How can I revert this situation, is it possible?
More info needed:
Did you already begin to update your QteK? Did your PC say "updating" with a red progress bar and a percentage amount? If so, I think you would need to try and get that cable working again. Perhaps redownload the ROM (the installer may have become corrupted) and make sure that ActiveSync is switched OFF. Perhaps even reinstall ActiveSync if nothing else works. THe cable may also not be getting enough power. Try plugging it into the USB on the back of your computer if it is plugged into a USB Bus or the front USB port. THe back port will give you the most power. Also, make sure it is plugged in to the AC adapter while you upgrade just to make sure your phone doesn't go flat.
If you had not started upgrading it, try reseting your phone using the reset button with the stylus.
unbrick xda II
Hi, I've got the same issue................
Any hope?????????????
Hello,
I isntalled that rom with kernel. http://forum.xda-developers.com/showthread.php?t=2391858. and the problem is now that my pc, cant see my phone, i tried every method i found on the site. i instaled all drivers and reinstaled from flashtool like 10 times, and my pc still doesnt see device. while i try to connenct via fasboot. i have the violet light for like 2 sekonds and after it the device starts to boot normally, same is with flashboot. flash tool does not give any msg of connecting a device. can any tell a way to get it working? i want to flash to stock soft. but i cant cause nothing sees the device with installed drivers.
FOrogot to ad that i flashed the aospa rom, cause i thought i will get usb working atlast. but im stuck now on com.android.phone stopped working, and i cant even download any other rom using phone:
EDIT
Just read in nemesis kernel topic "* Computer/PC Companion and even Flash Tool cannot detect.". so Any ideas how can i flash it. without have any other rom on sd card? I will be rlly happy if someone can help me, i know i made a big mistake but not doin recovery, first time i not did and all went wrong.
do u have SUS? (Sony Update Service)
try connecting with SUS if SUS don't detect your phone then flashtool will not detect your phone also.
Well it doesnt not see to, In my opinion no porgram will see it if device manager cant see it, but now after some slleep i got and idea. Could it be maybe the problem of to old micro usb cable. because my got broken. and i have to use from my sister that has samsung wave.
Good Luck.
LED should be blue not violet for fastboot.
Make sure the phone is shut down first, press volume up + power for 10-15 seconds untill you feel 3 vibrations.
Well whatever coulour it is violet or blue. I press the volume up connect the phone to usb. And i got this coulur for 2-3 second and then it goes to charging mode. it happens every time. Same happens to flashboot. Green for 2-3 sec and the it goes to charging mode.
maebara said:
Well whatever coulour it is violet or blue. I press the volume up connect the phone to usb. And i got this coulur for 2-3 second and then it goes to charging mode. it happens every time. Same happens to flashboot. Green for 2-3 sec and the it goes to charging mode.
Click to expand...
Click to collapse
It's not "whatever" if it's violet it means it's waiting for vol- to enter CWM and not entering fastboot.
Make sure the phone is turned off as I explained.
Phone is turned of, I allways wait for those 3 vibrations before i begin the process. And here to enter the cwm is blue, and for fastboot i have violet. If i had a camera i would record it to prove it.
maebara said:
Phone is turned of, I allways wait for those 3 vibrations before i begin the process. And here to enter the cwm is blue, and for fastboot i have violet. If i had a camera i would record it to prove it.
Click to expand...
Click to collapse
Flashtool and PCC worked before on the same PC?
What do you see in flashtool log when you connect in fastboot and flash mode?
ChikeD said:
Flashtool and PCC worked before on the same PC?
What do you see in flashtool log when you connect in fastboot and flash mode?
Click to expand...
Click to collapse
THey say nothing, As i say in the first post. PC does not see the device, Flastool handles as nothing has been conected. same device manager on wondows. no poop outs that drivers are missing, or anything.. Fastboot has allways waiting for device, doesnt matter how much i try to onnect. It worked before. I tried on other laptop but its same. Thats why later i wrot that maybe this cable is to old for that phone. But it works for other phones.
maebara said:
THey say nothing, As i say in the first post. PC does not see the device, Flastool handles as nothing has been conected. same device manager on wondows. no poop outs that drivers are missing, or anything.. Fastboot has allways waiting for device, doesnt matter how much i try to onnect. It worked before. I tried on other laptop but its same. Thats why later i wrot that maybe this cable is to old for that phone. But it works for other phones.
Click to expand...
Click to collapse
Your USB did not work before?
ChikeD said:
Your USB did not work before?
Click to expand...
Click to collapse
I got my orginal mircro usb from xperia but it went boroken last time, on monday i go buy me new. but i wanted to use my sis micro usb from samsung wave, well mirco usb is micro usb imo, but i can be wrong. before i was able to do things on that cable too. but now idk if its the cable fault. or its phone, cause seems i can only charge my phone throught it. even on pc. it only charges nothing more. I just want to know if there is any way to make phone visible to pc, installing drivers, reseting. wiping data on phone, nothing works
maebara said:
I got my orginal mircro usb from xperia but it went boroken last time, on monday i go buy me new. but i wanted to use my sis micro usb from samsung wave, well mirco usb is micro usb imo, but i can be wrong. before i was able to do things on that cable too. but now idk if its the cable fault. or its phone, cause seems i can only charge my phone throught it. even on pc. it only charges nothing more. I just want to know if there is any way to make phone visible to pc, installing drivers, reseting. wiping data on phone, nothing works
Click to expand...
Click to collapse
It could be the connector on the phone.
I use samsung cable no problem, the Sony that came with XP is still sealed
hi. so my problem is that my phone does not turn on, i cant go to recovery or do hard reset. the phone react when i plug it in PC without battery, but its always connect and disconnect over and over again. i have downloaded the omap drivers and instaled it. now i have in the device manager a OMAP4430 FastBoot USB device. by the drivers was a fastboot emulator. but when i will flash rom, kernel or recovery a just get partition does not exist. can someone help me please? srry for english.
Does your phone not turn on at all when holding down the power button? If it boots up, and gets stuck on a loop or has an error message, that is different. But if it doesn't turn on at all, then your battery is dead or something is wrong with your phone's hardware. If you connect your phone to the PC (with the battery on), does it at least show a light? Or does it boot up at all when you hold the power button? If it doesn't show a light or boot up, it is not your battery, but your phone's hardware. Your phone might have been dropped or water inside it or it was microwaved? I know it sounds silly, but something happened to the phone physically. Now if you connect it to the PC and you see a light but it never boots, your device is bricked. Not accusing you, but you might have tried rooting it or writing over a partition on your phone which caused to brick. Also, try typing in fastboot devices. If it shows up a device, that means it is connected. Cheers!
No the phone does not turn on and it shows nothing, even when i put it on charger. If i connect to pc with battery after i installed the omap driver it just connect and disconnect over and over again, windows make this sound when you connect and disconnect something. I have flashed a new rom. It has worked but after some time its stoped. So i have try flashed it again but i could not get in recovery. A files was missing and after i try flashing thhe recovery its just dead. I can connect it just with the fastboot emulator because it's don't connect when i just put it on pc. I must connect it without battery wait 4 sec and then put the battery back. Than i can see in the emu my phone but not able flash anything because of partition does not exist
Hello,
I am presently facing a strange issue with my Honor 4c. Nothing has gone wrong on my phone for almost 1 year but recently, impossible to charge my battery while my phone was on. Today, after a few weeks thinking my phone was just dieing, I have tried to make a back up and wanted to save all my data on my computer. However, impossible to connect my phone to my computer. Then I realized the problem was probably due to my USB parameters (No interface asking for mode to choose when I plug USB).
I finally did my back up but issue is still there : I can only use USB while my phone is OFF... meaning I only charge my phone when it is OFF..
I did not find any solution on internet and did not find an option to allow this interface to come back, even by trying to go in "developer options"
Could you please help?
Thanks
Tahir
Hi , if you did back up , remove all accounts from phone and do Factory Reset , also make sure you are using original usb cable and plug in another usb port ...
i can do factory reset but problem is still . i can use original USB cable but not happen any thing. i check all ports..
when i put phone off it is working like charging. but when i put on Phone it is not working not charging no connect to computer..
plz help