How to change x10i back to X10a after JIT - XPERIA X10 Q&A, Help & Troubleshooting

As the title states, when I enabled JIT on official 2.1 x10a firmware from Roger, it changed my phone to x10i. how can I change it back while keeping JIT so I can get future updates?
Thanks

I know it's in the forums. There is a string in a file you need to alter. Worked like a charm for me.
I have to run, but I'll be back home in about 2-3 hours. If you haven't found the information by then, I'll help search for it with you.

pyro224 said:
As the title states, when I enabled JIT on official 2.1 x10a firmware from Roger, it changed my phone to x10i. how can I change it back while keeping JIT so I can get future updates?
Thanks
Click to expand...
Click to collapse
Use one of the methods in this thread
http://forum.xda-developers.com/showthread.php?t=824711
either of the 2 will work, for 2.1 you will be editing the build.prop

looks complicated haha
wish there was a script for this
oh well
thanks a lot

pyro224 said:
looks complicated haha
wish there was a script for this
oh well
thanks a lot
Click to expand...
Click to collapse
See next post....

JIT for X10a (build 2.0.A.0.504)
Hi All,
For all of you who install JiT and worry that their phone says X10i rather than X10a, I have edited and attached the JiT files so now it will say X10a running 1234-4820 world generic. Just download the attached file and follow the instructions here. You can download Terminal Emulator.apk from the market.
Hope this helps.
**EDIT**
JIT v2 has been released and it does not change the model info. You can find it here.

Unintenionally Downgraded to .504 build
This worked great. I was able to install JiT without trouble.
I later discovered I was back on the .504 build. After reflashing to the .24 build I discovered that it was the JiT that downgraded me. Is there a JiT for the latest build?
Thanks
batman_112 said:
Hi All,
For all of you who install JiT and worry that their phone says X10i rather than X10a, I have edited and attached the JiT files so now it will say X10a running 1234-4820 world generic. Just download the attached file and follow the instructions here. You can download Terminal Emulator.apk from the market.
Hope this helps.
Click to expand...
Click to collapse

JaredP said:
This worked great. I was able to install JiT without trouble.
I later discovered I was back on the .504 build. After reflashing to the .24 build I discovered that it was the JiT that downgraded me. Is there a JiT for the latest build?
Thanks
Click to expand...
Click to collapse
There is an optimized version of JIT for Xrecovery, also a version of 024 rooted and with JIT.

Tony_C said:
There is an optimized version of JIT for Xrecovery, also a version of 024 rooted and with JIT.
Click to expand...
Click to collapse
Thanks for your response. I was trying to avoid installing XRecovery. I ended up using Bin4ry's flash tool. Then I gave in and installed XRecovery to get JiT2.
Sent from my X10a using XDA App

JaredP said:
This worked great. I was able to install JiT without trouble.
I later discovered I was back on the .504 build. After reflashing to the .24 build I discovered that it was the JiT that downgraded me. Is there a JiT for the latest build?
Thanks
Click to expand...
Click to collapse
This is the older JIT version. It did not change your firmware, it changes the build.prop. You were still running the .24 fw but, the build.prop was from the old firmware. I forgot to update it since the new JIT has been released and it does not affect the model info.

batman_112 said:
This is the older JIT version. It did not change your firmware, it changes the build.prop. You were still running the .24 fw but, the build.prop was from the old firmware. I forgot to update it since the new JIT has been released and it does not affect the model info.
Click to expand...
Click to collapse
Ok, thanks. I was wondering if I could have simply edited the build prop.
Sent from my X10a using XDA App

Related

[Q] Change Nordic 2.1 build.prop possible?

I'm currently running 2.1 Nordic on X10 mini pro. When my country's (SG) version 2.1 is out, is it possible to just change the build.prop in current Nordic version to SG and re-flash via SEUS?
Is there any other thing i should be aware of before i try that?
Thanx in advance.
I tried for the purpose of test to flash Russian 2.1 over Nordic 2.1. It didn´t work.
vlissine said:
I tried for the purpose of test to flash Russian 2.1 over Nordic 2.1. It didn´t work.
Click to expand...
Click to collapse
****, because that's what i wanted to do when the german 2.1 is out. so, if that isn't possible, what do we do then?
edit: i read so much stuff on here the last days, what i'm going to try is de/reinstall SEUS after that, at least move or rename the /db/ folder.
You can flash back to 1.6, root, change build.prop and update again via seus.
gubshi said:
****, because that's what i wanted to do when the german 2.1 is out. so, if that isn't possible, what do we do then?
edit: i read so much stuff on here the last days, what i'm going to try is de/reinstall SEUS after that, at least move or rename the /db/ folder.
Click to expand...
Click to collapse
I stand corrected. you can´t downgrade to 1.6, but can switch to another version of 2.1 via editing build.prop
It is a good idea to reinstall seus, and delete all directories of Sony Ericssson before making any drastic changes.
vlissine said:
I stand corrected. you can´t downgrade to 1.6, but can switch to another version of 2.1 via editing build.prop
It is a good idea to reinstall seus, and delete all directories of Sony Ericssson before making any drastic changes.
Click to expand...
Click to collapse
vlissine, can u list down which country version u're able to change to? Cuz i tried a few SG version but was unsuccessful.
Yeh u can just delete the settings db and temp folders instead of reinstalling seus I think. Something like that anyway, don't remember the exact folders
Sent from my U20i using XDA App
For 1.6, all we need to do was change the country/product in build.prop and just update via seus. So i'm assuming the same applies to 2.1 as well, unless I'm wrong.
PS: U can't downgrade to 1.6 via SEUS but u can flash to 1.6 via flashtool.
Apparently when you tell PC Companion to Repair, it will obey whatever is in build.prop regardless of the current firmware, thus allowing you to shuttle between different 2.1 firmwares.
Allegedly, anyway. I haven't test this myself.
i just put báck the original build.prop and my phone went into infinite boot loop ????????????/ so weird. any body can help me...
try to reinstall using seus. if not reload everything using flashtool.

How get Official 2.1 after Flashed 2.1

As the title says, how do I get 2.1 from SE after I have flashed with the X10i Global 2.1 FW? Any ideas? I apologize if this has been posted somewhere else but I couldn't find it.
hramos20 said:
As the title says, how do I get 2.1 from SE after I have flashed with the X10i Global 2.1 FW? Any ideas? I apologize if this has been posted somewhere else but I couldn't find it.
Click to expand...
Click to collapse
well first off which model did you originally have x10a or x10i
Sent from my X10a using XDA App
fightingroost12 said:
well first off which model did you originally have x10a or x10i
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Well the model is Originally X10i as it says in the back of the phone. Then I flashed it to X10a for FW 1.6 because I use it in Honduras, Central America. After that I did the Flash for X10i Global 2.1. So I really don't know what to do and which version I will get.
I found out in this blog that kit on the back of my phone 1232-4308 already has the update but SEUS always used to say I have the latest update.
http://blogs.sonyericsson.com/products/2010/11/09/these-kits-have-the-update/
hramos20 said:
Well the model is Originally X10i as it says in the back of the phone. Then I flashed it to X10a for FW 1.6 because I use it in Honduras, Central America. After that I did the Flash for X10i Global 2.1. So I really don't know what to do and which version I will get.
I found out in this blog that kit on the back of my phone 1232-4308 already has the update but SEUS always used to say I have the latest update.
http://blogs.sonyericsson.com/products/2010/11/09/these-kits-have-the-update/
Click to expand...
Click to collapse
theres a tutorial somewhere around here (i cant find it anymore) tbat shows how to change your phone to any brand you want. you just need to find the code for the region you want, then go into your settings file and change the numbers accordingly. sorry im not much help i havent done it in a while, just look around for it it shouldnt be any further than page 3 of android development. But yea once you change the right codes restart your phone twice and then plug it into seus and click reinstall and your good to go btw you will need root acess and a program like root explorer to do this
Sent from my X10a using XDA App
hramos20 said:
As the title says, how do I get 2.1 from SE after I have flashed with the X10i Global 2.1 FW? Any ideas? I apologize if this has been posted somewhere else but I couldn't find it.
Click to expand...
Click to collapse
See post from im_iceman
http://forum.xda-developers.com/showthread.php?t=828163&highlight=cust.prop
the xxxx-xxxx IS NOT the SI number. You need the "Customization Version" number. this can be found in the post from xperiaX10 at it is the 1st set of numbers
http://forum.xda-developers.com/showthread.php?t=826875&highlight=Country+codes

[Q] Australian X10a - Debrand & Update

Hi All,
I've recently purchased an X10 and while its quite a nice phone, I'm sure it would be a hell of a lot nicer if it was running 2.1 - some things which are "missing" in 1.6 have started to annoy me haha.
To this end, it would appear Telstra are about the slowest telco on the planet to release an update. My current firmware is as follows:
X10a
Country: Australia, Brand: Telstra
Phone Software Version: 1227-4612_R2BA023 GENERIC
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net (google finds it, I'm not allowed to link yet sorry!) and debrand it, SEUS will then automatically update my phone to 2.1 next time I try to update.
Can anyone tell me what is a good X10a firmware for use in Australia? Note that it needs to be X10a since I use an 850MHz "nextg" network. The list on the link above appears to give me a rather limited set of choices, none of which sound generic or australian (what makes latin america latin america??).
If anyone could give me some hints that would be most apprecitated!
Thanks,
Tom
draget said:
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net
Click to expand...
Click to collapse
Which no doubt stems from xda, so you might as well use the original guides from here.
X10Flash 2.1 final & 2.1 Firmware (Update Flasher 14.11.2010)
That will debrand and update you to 504 firmware, then you can install xRecovery, then install a prerooted .24 which is the latest FW, which can't be rooted in the usual methods just yet.
And give this a read too - Step By Step Flashing 1.6 - 2.1
Aside of Xperiax10user advice. After you are done with the upgrade to. 504 2.1 version I recommend you to follow this easy thread to install Xrecovery, delete Junk apps and install Zdizihu's JIT v2...
http://forum.xda-developers.com/showthread.php?t=895351
After that you'll be set to start enjoying your X10...
Jim
Sent from my X10i
jimbo77 said:
Aside of Xperiax10user advice. After you are done with the upgrade to. 504 2.1 version I recommend you to follow this easy thread to install Xrecovery, delete Junk apps and install Zdizihu's JIT v2...
Click to expand...
Click to collapse
Do that after getting to .24
draget said:
Hi All,
I've recently purchased an X10 and while its quite a nice phone, I'm sure it would be a hell of a lot nicer if it was running 2.1 - some things which are "missing" in 1.6 have started to annoy me haha.
To this end, it would appear Telstra are about the slowest telco on the planet to release an update. My current firmware is as follows:
X10a
Country: Australia, Brand: Telstra
Phone Software Version: 1227-4612_R2BA023 GENERIC
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net (google finds it, I'm not allowed to link yet sorry!) and debrand it, SEUS will then automatically update my phone to 2.1 next time I try to update.
Can anyone tell me what is a good X10a firmware for use in Australia? Note that it needs to be X10a since I use an 850MHz "nextg" network. The list on the link above appears to give me a rather limited set of choices, none of which sound generic or australian (what makes latin america latin america??).
If anyone could give me some hints that would be most apprecitated!
Thanks,
Tom
Click to expand...
Click to collapse
1. Watch this tutorial.
2. Go here and download the flash tool and the X10a 2.1 world generic.
3. Flash the firmware as in the tutorial.
4. Enjoy!
Tom, I had exactly the same issue with Telstra. My brother is with Optus and had his months ago. I finally cracked it and de-branded my phone, installed 2.1 and it all went fine. Trust me its worth it. Then i rooted it and have'nt looked back... goo luck mate
Hi,
Thanks for the advice! I followed the tutorial and updated to 504, then flashed again to .24, however on both of these my bluetooth does not work :-/ Windows 7 shows nothing in the services menu and the phone seems to pair with devices but never connect. Also the .24 ROM available appears to have been a X10i ROM, this doesn't seem to have mattered though as 850MHz HSDPA still seems to work.
Any thoughts on fixing bluetooth?
I haven't installed the rooted version btw and I'm not quite sure what xrecovery does? Thanks!!
Fixed BT - turns out it didn't like to talk to my MacBookPro on Windows - updating Boot Camp drivers to 3.2 fixed that.
As for xrecovery, what does it do? And how does one root 0.24?
Thanks for the help!
Tom
draget said:
=I haven't installed the rooted version btw and I'm not quite sure what xrecovery does? Thanks!!
Click to expand...
Click to collapse
You could have saved time and flashed straight to it using SEUS if you didn't want to root.
draget said:
As for xrecovery, what does it do?
Click to expand...
Click to collapse
Allows you to flash to the phone at boot, so you can install custom and user ROMS, themes, and pretty much anything else.
draget said:
And how does one root 0.24?
Click to expand...
Click to collapse
XperiaX10iUser said:
X10Flash 2.1 final & 2.1 Firmware (Update Flasher 14.11.2010)
That will debrand and update you to 504 firmware, then you can install xRecovery, then install a prerooted .24 which is the latest FW, which can't be rooted in the usual methods just yet.
Click to expand...
Click to collapse
So you need to use the flashtools to flash back to 504, root, install xRecovery, then install the Pre-rooted .24.
batman_112 said:
1. Watch this tutorial.
2. Go here and download the flash tool and the X10a 2.1 world generic.
3. Flash the firmware as in the tutorial.
4. Enjoy!
Click to expand...
Click to collapse
Thanks for clarifying - it seems to be working nicely now so I'm pretty happy haha I'll get bored and have a go at rooting it eventually! After putting 504 on SEUS told me I was up to date, but all is good now

[Q] What is best 2.0.2.A.0.24 or 2.0.A.0.504?

What version is fastest and what is the newest? The .504 is only for uk?
2.0.2.A.0.24 Is newer. It has a faster gui and other pros. The other version is available in all the world. Regards
Just get the newest. I'ts rootable and custom themes will be adjusting to it.
Is there a thread or place with all the links to download the latest firmwares (ordered by version)?
I tried this one:
http://forum.xda-developers.com/showthread.php?t=825664
But there they don't specify if the firmwares are 2.0.2.A.0.24 or 2.0.A.0.504 (I tried the UK one, but I found that it's 2.0.A.0.504).
I've an X10 Mini E10i. Any help?
Thanks in advance.
Not sure whether .24 is newer. When I plug in the usb pc companion prompts me to update the software even though it's on 0.24. I haven't tried updating cause all it will do is install a patch to remove the root.
As stated in the Wiki:
http://forum.xda-developers.com/wiki/index.php?title=Xperia_X10_Mini_Official_ROMs
The .24 is newer than the .504
Hi.
I have found very little difference between .504 & .24 (Agreed, .24 is newer) I think that the primary purpose of it was to stop ROOT.
I use JIT and the performance via Linpack is always above 7.00 MFLOPS (Almost twice as fast as standard!). I had these results on both versions.
.504 currently has the better compatability for themes... until people port them to .24.
Hope this helps
deano309 said:
Hope this helps
Click to expand...
Click to collapse
Of course it helps! A LOT, indeed!
But the thing is that, if I want to use your ROM, I can't because of this NOTE:
deano309 said:
NOTE: You must already be running Firmware 2.0.A.0.24 or it may cause your device to boot infinately (Or not at all!)!!!
Click to expand...
Click to collapse
Sooo... where can I get a .24 Firmware? (right now I've a 504 and I want to change it). I've checked the forums, but people usually write the version but not the build
alexrsj said:
Of course it helps! A LOT, indeed!
But the thing is that, if I want to use your ROM, I can't because of this NOTE:
Sooo... where can I get a .24 Firmware? (right now I've a 504 and I want to change it). I've checked the forums, but people usually write the version but not the build
Click to expand...
Click to collapse
OK, here is a quick step by step:
1. Download, Install and run SE Update Service (Backup ALL data first!).SE Update Service
2. Once phone is updated, ROOT it following this guide: SuperOneClick v1.5.5 (Modified)
3. Install XRecovery on your device using this guide: [RECOVERY]
4. Copy the zip file with one of my updates to your SD Card, start XRecovery & choose to install!!!
That easy!!
deano309 said:
OK, here is a quick step by step:
1. Download, Install and run SE Update Service (Backup ALL data first!).2. Once phone is updated
Click to expand...
Click to collapse
I can't update my phone to .24 using SEUSS because that firmware is not available from my operator/country yet (the software says that I already have the last version -even when I was with the 1.6 firmware!-).
In fact, the .504 wasn't available either, so I flashed it manually with an UK ROM that I found in this forum withouth knowing it was .504...
alexrsj said:
I can't update my phone to .24 using SEUSS because that firmware is not available from my operator/country yet (the software says that I already have the last version -even when I was with the 1.6 firmware!-).
In fact, the .504 wasn't available either, so I flashed it manually with an UK ROM that I found in this forum withouth knowing it was .504...
Click to expand...
Click to collapse
I just posted something similar for someone else.
Check out this post: http://forum.xda-developers.com/showpost.php?p=10591343&postcount=6
deano309 said:
I just posted something similar for someone else.
Check out this post: http://forum.xda-developers.com/showpost.php?p=10591343&postcount=6
Click to expand...
Click to collapse
Wow! Thanks A LOT! I'm going to try it right now and will keep you all informed!
you guys might want to check this out too.. (if you don't have any joy with the build.prop edit)
http://forum.xda-developers.com/showthread.php?t=884771
good luck

New update for mini shown in seus

Just now I connected my Mini with latest 0.24 firmware version installed. SEUS is showing new update available. I have not updated as I have some urgent calls to come. Anybody can checkup. I have a nordic build.prop. Waiting for some great news
Good luck
new update also here in italy, same as you but italian build.prop
Yep ! New 2.1.1.А.0.6. Last SuperOneClick root mini successfully.
what changes do we have with this new version?
Termodonte said:
what changes do we have with this new version?
Click to expand...
Click to collapse
Old bugs fixed, new added
+ new app: OfficeSuite Demo
who have a new update, please give a namber of build.prop
Thank's for attention
i reflashed today using seus after probs with my memory card,im still on same firmware but have a new app called application installer
Squezzz,
http://www.sony-ericsson.ru/forums2/index.php?showtopic=62443 (in Russian)
xrecovery works great with 2.1.1.А.0.6, but let's wait new versions of jit update and themes update, old versions could brick your phone
does it really worth upgrading and go again into reinstall everything?
cheers
Anyone got the update on x10 mini pro?
Ive changed to the the nordic build.prop and the latest one ive got is .24
rikirix said:
does it really worth upgrading and go again into reinstall everything?
cheers
Click to expand...
Click to collapse
before updating with SEUS, I unrooted the phone with superoneclick, then I updated the phone but no need to reinstall everything (pheew )
Termodonte said:
before updating with SEUS, I unrooted the phone with superoneclick, then I updated the phone but no need to reinstall everything (pheew )
Click to expand...
Click to collapse
thanx mate....if i unroot i'll have some things not working....jit....link2sd.....and others....did u find some real improvements on the .24 version?
cheers
Termodonte said:
before updating with SEUS, I unrooted the phone with superoneclick, then I updated the phone but no need to reinstall everything (pheew )
Click to expand...
Click to collapse
And then you re-roooted again after update and have all the apps including Link2SD functioning properly?
BTW this update doesn't seem to have anything great which can equal the pain taken to reinstall everything. If Termdonte's process works OK universally then it can be tried.
Hoping for Tattoo 2.2 port by Contrarian / CM 2.2 by Mikevhl to work then only i may do a full upgrade.
sur1k said:
Squezzz,
http://www.sony-ericsson.ru/forums2/index.php?showtopic=62443 (in Russian)
Click to expand...
Click to collapse
No man, it's for X10, not for X10mini/pro.
parthabhatta said:
And then you re-roooted again after update and have all the apps including Link2SD functioning properly?
BTW this update doesn't seem to have anything great which can equal the pain taken to reinstall everything. If Termdonte's process works OK universally then it can be tried.
Hoping for Tattoo 2.2 port by Contrarian / CM 2.2 by Mikevhl to work then only i may do a full upgrade.
Click to expand...
Click to collapse
I didn't have link2sd installed so i can't tell you if after the update it will keep working. anyway, root with superoneclick works with this new version too.
its a minor update 2.1.1.a.0.6
easily rooted and Link2sd working fine
all i can see is the
support for arabic and Persian languages,
icon change for support and
anonymous statistic unloader (to sonyericsson)
heard that moxier mail is interated in timescape but cant tell yet
NO MULTITOUCH
Can anyone post prop file so that i can update my x10mini?
mclaudio said:
Can anyone post prop file so that i can update my x10mini?
Click to expand...
Click to collapse
i have the original build prop file for my x10 mini (not pro) backupped with adb mask controller, and my mini (ITA) is ready for update is it ok?
i think its ok. does it have english language?

Categories

Resources