MBR checksum error - Vibrant Q&A, Help & Troubleshooting

Call me stupid, but I chose to try cwm partition sd option (I was thinking I needed to so I could put apps on the external SD). It caused a MBR checksum error, then after Odin flash I was getting no app storage 0.0k Somehow I fixed that and am now running Axura 2.2 (wipes sweat from brow)
Question is: I still have the MBR checksum error is there a fix for this?
Clockwork should remove this option! It is causing a lot of people problems!!!

have the same issue, I ended up using Odin to get to Eugene no brick froyo. Once there I couldnt install anything or download anything .... was unable to get into clockwork recovery. Today I finally found a solution for that, place an update zip of CWR on the sd card. I booted into stock recovery and install updates, this took me into CW recovery ... Now I have
E:failure at line 12
copy_dir package:data Data:
installation aborted
Not sure if it was a rom issue or not

osugsxr said:
have the same issue, I ended up using Odin to get to Eugene no brick froyo. Once there I couldnt install anything or download anything .... was unable to get into clockwork recovery. Today I finally found a solution for that, place an update zip of CWR on the sd card. I booted into stock recovery and install updates, this took me into CW recovery ... Now I have
E:failure at line 12
copy_dir package:data Data:
installation aborted
Not sure if it was a rom issue or not
Click to expand...
Click to collapse
Yeah, thats what I was getting, but after I re-flashed the "no brick froyo" using Odin once with repartion un-checked and then again with it checked I was able to use CWM to flash the Axura zip without the E:failure at line 12 error
just remembered I also used the voodoo lag fix (another post recomended it) flashed so many times its hard to rememer the sequence.
1. Oden "no brick froyo" with repartion un-checed
2. CWM voodoo lagfix
3. reboot
4. disable voodoo
5. Oden "no brick froyo" w/ repariton checked

Derzicom said:
Yeah, thats what I was getting, but after I re-flashed the "no brick froyo" using Odin once with repartion un-checked and then again with it checked I was able to use CWM to flash the Axura zip without the E:failure at line 12 error
just remembered I also used the voodoo lag fix (another post recomended it) flashed so many times its hard to rememer the sequence.
1. Oden "no brick froyo" with repartion un-checed
2. CWM voodoo lagfix
3. reboot
4. disable voodoo
5. Oden "no brick froyo" w/ repariton checked
Click to expand...
Click to collapse
can you post links for the cwm voodoo lagfix, and how to disable?

I found the Voodoo lag fix here http://project-voodoo.org/
and to disable it you just make a directory called "disable lagfix" wihout the quotes in the Voodoo directory on the SD

How were you guys able to install apps again? I was able boot into CWR and install a new rom, but I still have the issue with the phone thinking I have no memory. And all the while trying to fix this I lost 5 gigs on my SD card. I checked to see if anything is partitioned or converted to anything else, but it just says thats its an 11gig card.
Help would be greatly appreciated.

I have the same problem. Did exactly the same thing Derzicom did. now i cant install any apps from market. I've tried installing a whole bunch of different roms. Its the same problem. "sorry, there's not enough space to install this item".

Related

[Q] Bionix 1.9 install problems.

been searching last 2 hours to no avail..
I appreciate any feedback cause I cant seen to get this.
Started with stock rom, un-rooted.
Installed rom manager per bionix instructions..
Downloaded bionix191_stock.zip
Saved to root sd card.
Selected "Install rom from sd card"
Informed me to unroot.
installed ryanZA's oclf from the market to root.
Re-ran rom manager.
Selected again "Install rom from sd card"
Selected wipe data and cache
Reboot process begins.
stops at "update.zip (bad) error.
What am I doing wrong?
try redownloading it.
Thanks for the reply...
I already tried downloading the zip again.
The zip file matches the proper size from
The link as stated on the install info...
I have the copy on my sd card in the root folder
as well as my download folder.
do I have to do something in the OCLF app?
try rooting withouth OCLF, using a normal update.zip
also, did you rename the bionix file?
I didn't know I had to rename the zip.
What do I rename it to?
The rom manager wouldn't run without a root,
so I had to use oclf first...
do I have to odin back to stock to install bionix?
no, dont rename it. this is what I did.
1. Odin to stock http://forum.xda-developers.com/showthread.php?t=734475
2. install the update.zip from stock recovery
3. use market to download ROM manager
4. use ROM manager to reboot into recovery (do not use install rom from SD card)
5. you may need to use stock recovery to reinstall packages
6. in clockwork, install zip from sdcard
7. choose zip from sdcard
8. choose your bionix version
9. install
10. reboot twice
thx Brian, worked perfectly. You are a friend an a scholar!
I installed Bionix 1.9.1 Voodoo (OC/UV/Voodoo Kernel)
Benchmarked at 1878
installed OCLF right after..but the 2.1 & 2.2 lagfixes are unavailable...
Trying to fig out how to install OCLF on top of voodoo?
You don't use both the OCLF and Voodoo at the same. Voodoo requires a bit more reading comprehension and user ability than OCLF. For people that want a LagFix without the hassle of Disabling/Enabling Voodoo every time you reflash; OCLF is for you.
I'm on Bionix 1.9.1 with JACs OC/UV Kernel and no Voodoo (don't really feel the need) and I used OCLF to root way back when I had stock TWiz.
Glad you got it working and from here on out if you flash any of the prominent ROMs available you don't have to revert to stock as most of them wipe clean as part of their script. Just boot into ClockWork recovery, install zip from SD and find whichever ROM you want.
Oh and always nandroid before flashing a new ROM and use Titanium Backup to back up your apps and such.
I actually do not use the voodoo lagfix, because you have to disable it every time you want to flash something. I have had to repartition my phone so many times because of it I finally just stopped using it. Bionix is so fast I don't really see a need for the lagfix anyway.
Sent from my SGH-T959 using XDA App
briankao1992 said:
I actually do not use the voodoo lagfix, because you have to disable it every time you want to flash something. I have had to repartition my phone so many times because of it I finally just stopped using it. Bionix is so fast I don't really see a need for the lagfix anyway.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I second this post. Bionix is fast enough comming from Stock. I do not think I need the lag fix.
Fusion is even better now!!!

[Q] Ghost of ROMs past haunts my Vibrant

I've been stuck in a weird place for some time with my phone. After I installed clockwork mod, backed up, installed some flavour of FroYo, and made the mistake of trying to flash back my old back up without properly wiping things have been getting weird. I can use ODIN to flash fresh ROMs, but I always get a bunch of FCs at startup, and most apps don't work. I tried to do all kinds of tricks to completely wipe the internal SD, but there is always some remnants of old fun hanging about causing cascading errors and FCs. No matter what I try to do, MyBackupPro and Rommanager is always present, but not working.
How I can completely rid myself of anything not stock ROM?
I've finally gotten back to root ADB, after a long and hard battle. I believe this may hold the key to salvation for my Vibrant.
Any and all suggestions are much appreciated!
Things I've already tried:
EUGENE373_SamsungS_Froyo_PDA -> Stock 2.1 T959UVJFD
EUGENE373_SamsungS_Froyo_PDA -> battery pull -> Stock 2.1 T959UVJFD
Stock 2.1 T959UVJFD -> EUGENE373_SamsungS_Froyo_PDA
Bionix1.9.zip - would not install due to some error I can't recall right now. Will update.
Factory wipe - from Settings menu
Wipe in Clockworkmod menu
Wipe all in adb shell
The weird *2767*3855#* factory wipe
UPDATE:
Strangest thing happened: I flashed an old ROM back onto the phone with Odin 1.52, then the Updated Stock 2.1 also via Odin the usual FC-ing was still there. Then I rebooted into recovery, reinstalled the Clockworkmod recovery menu, installed the root-update.zip in order to have root shell access. Then I pushed VibrantDeodexed1_2.zip and Vibrantfroyo_R3.zip on to the sd card. I tried to apply the VibrantDeodexed1_2.zip, but it aborted due to some catalog not present. However, I did notice that the installation erased /system and deleted some files, and I had the notion to try and install the VibrantFroyo_R3.zip. The installation succeeded, and Lo and Behold!
the phone has returned to the land of the living! Wohoo!!
I do not fully understand how this can be, but there is no Force Closing of programs any longer. What a relief!
Thanks to everybody who contributed ideas!
If you're having problems, back up whatever data you want to keep to your computer. Go download eugenes 2.2 that doesn't brick. Flash that, do a battery pull once it's done (don't reboot). Then go get a stock eclair file, flash that with odin and check repartition. This solved every problem I had from flashing way too many roms.
Yea, when in doubt I thank the deities for Eugene and flash his "Froyo that doesn't brick" followed by the stock JFD firmware.
Sent from my SGH-T959 using XDA App
brnagndan said:
If you're having problems, back up whatever data you want to keep to your computer. Go download eugenes 2.2 that doesn't brick. Flash that, do a battery pull once it's done (don't reboot). Then go get a stock eclair file, flash that with odin and check repartition. This solved every problem I had from flashing way too many roms.
Click to expand...
Click to collapse
Sorry to say, that trying this solved nothing. Just the same as before.
ullrotta said:
Sorry to say, that trying this solved nothing. Just the same as before.
Click to expand...
Click to collapse
You clicked the "repartition" option? That should format your internal sd...
I7oobie said:
You clicked the "repartition" option? That should format your internal sd...
Click to expand...
Click to collapse
Yeah, that's the weird part.. It doesn't really delete anything. Files are still there, and so are the un-wanted system files, too.
Does anyone know if I can manually partition the sdcard?
Had a similar issue, and couldn't fully erase my files. Figured out how to completely erase everything, before you proceed, backup your files and be ready to Odin. In rom manager, enable advanced mode in settings, then use the flash alternate recovery option. That set my current cwm version to 2.5.1.2, now when I reboot to cwm i have a menu that says something similar to "sd and storage" and within that menu are options to completely format all of the internal storage. Be careful in there, you can delete everything, incl the sd ext, but I think this is what you are looking for.
Edited - I rebooted and checked the menus, mounts and storage in cwm is what you are looking for after flashing the alternate recovery, I can confirm this removes remnants that an Odin repartition or factory format still leaves behind, let me reiterate, backup your personal files, cause this does remove everything
After formatting, Odin away
Sent from my T959 running Bionix1.91 with Jacs OC/UV and Voodoo
same thing happened to me >.> I just formatted the SD card on the phone. then flashed whatever rom I wanted.
Br1cK'd said:
Had a similar issue, and couldn't fully erase my files. Figured out how to completely erase everything, before you proceed, backup your files and be ready to Odin. In rom manager, enable advanced mode in settings, then use the flash alternate recovery option. That set my current cwm version to 2.5.1.2, now when I reboot to cwm i have a menu that says something similar to "sd and storage" and within that menu are options to completely format all of the internal storage. Be careful in there, you can delete everything, incl the sd ext, but I think this is what you are looking for.
Edited - I rebooted and checked the menus, mounts and storage in cwm is what you are looking for after flashing the alternate recovery, I can confirm this removes remnants that an Odin repartition or factory format still leaves behind, let me reiterate, backup your personal files, cause this does remove everything
After formatting, Odin away
Sent from my T959 running Bionix1.91 with Jacs OC/UV and Voodoo
Click to expand...
Click to collapse
When I boot into recovery, I always have to reinstall packages to get to the CWM recovery menu. I tried to clear everything from the mounts and storage submenu; I cleared system, cache and data, then flashed stock eclair. STILL the same applications and files sit on the internal SD.
When performing the wiping, all looks normal. It does take a little time, and the system reports that all is going according to plan, yet no files are deleted.
What can possibly make the phone act this way? Are there no super secret samsung-technician codes that allow me to completely wipe clean the face of the sdcard?
When you get into the storage and mounts menu, I would format everything given what you're experiencing. Format boot, data, system, cache, and sdcard. Dont format the sd ext, thats the physical card. After formatting all of those your phone should be an odin ready blank slate, mine was. Hope this helps.
Sent from my T959 running Bionix1.9 with Jacs OC/UV and Voodoo
this has to be one of the most useful threads. just last night i was messing with rom manager and enabled advanced settings, BEEFORE reading this thread. I've done so much monkeying, but didn't keep a journal or log, so ive got **** from so many hacks and tweaks (mods and themes)...
thanks, im gonna wipe this ****er clean.
Good Info..but moved to Q&A
Br1cK'd said:
When you get into the storage and mounts menu, I would format everything given what you're experiencing. Format boot, data, system, cache, and sdcard. Dont format the sd ext, thats the physical card. After formatting all of those your phone should be an odin ready blank slate, mine was. Hope this helps.
Sent from my T959 running Bionix1.9 with Jacs OC/UV and Voodoo
Click to expand...
Click to collapse
This is exactly what I tried yesterday. I'll try it again a few times to see if I can find a way.
ullrotta said:
This is exactly what I tried yesterday. I'll try it again a few times to see if I can find a way.
Click to expand...
Click to collapse
I was hoping that would help you friend, that process wiped mine clean of all remnants. Good luck in getting her back into a functional state.
After reading som more, contacting Samsung Service, I've decided to send the phone in for service. [sigh]
I've learnt a lot about ADB, pushing and pulling files, rooting, unrooting, swapping ROMS and whatnot. Still, the phone is stuck in that weird place where I cannot delete files.
Hopefully the service team can fix this poor, misguided phone

I need help installing Obsidian

I am trying to install the new Obsidian based on froyo 2.2 with the Samsung Vibrant. I rooted it using the one click root and downloaded ROM manager. When I try to back up my current ROM the phone reboots and says E: Can't open /cache/update.zip (bad) Installation aborted.
Because of this I cannot install the Obsidian ZIP file because the same error message pops up.
redownload rom and dont use rom manager, it will erase your internal sd card. Use clockwork recovery and then flash a fresh downloaded obsidian rom
crxforya said:
redownload rom and dont use rom manager, it will erase your internal sd card. Use clockwork recovery and then flash a fresh downloaded obsidian rom
Click to expand...
Click to collapse
I use ROM Manager like 50 times a day and my SD card never gets wiped.
is clockwork recovery within ROM manager? So i click on Reboot into recovery or Flash ClockworkMod Recovery? Thanks for the help also.
Wait, is this your first time flashing a ROM? Walk us through what you've done so far.
I'm guessing you had your USB plugged in, and didn't get a good flash of clockwork. Unplug your USB, go into clockwork, and flash the latest version of clockwork. Then reboot, go back into clockwork, try to backup and see what you get
Here is what I did:
1. One-click root
2. Download ROM Manager from market
3. Downloaded Obsidian and placed it on my SD card via USB
4. Opened ROM Manager and clicked Backup current ROM, which is where i got the error message that /cache/update.zip could not be read
5. Tried to install obsidian by clicking Install ROM from SD Card and choosing the obsidian that I put on my SD card and I get the error saying /cache/update.zip could not be read (bad) installation aborted.
FIRST WRONG SECTION
notw thats out of the way, In Rom manager click reboot into recovery, then if you have blue text on your screen click reinstall packages, thenmanually pick thee rom to flash from the other (green text) recovery
PS WRONG SECTION
Iuse think free office. Navigate to download folder. Click the zip. Hit Clockworkmod recovery. Ok. Ok. Now let it do its thing. Enjoy. Personally I don't like it.. im back to fusion... didn't like lack of black. and double tap features... big down sides for me... and twiz.. so I'm back to fusion1.2... and LOVE IT! Only one to beat it is Bionix themselves and I'm waiting very patiently!
sgsV bionix.. If ya don't got it GET IT!
DanglaGT said:
Here is what I did:
1. One-click root
2. Download ROM Manager from market
3. Downloaded Obsidian and placed it on my SD card via USB
4. Opened ROM Manager and clicked Backup current ROM, which is where i got the error message that /cache/update.zip could not be read
5. Tried to install obsidian by clicking Install ROM from SD Card and choosing the obsidian that I put on my SD card and I get the error saying /cache/update.zip could not be read (bad) installation aborted.
Click to expand...
Click to collapse
Was your USB mounted to your computer when you clicked "Flash ClockworkMod Recovery" in ROM Manager? That will cause the error you have.
If so, disconnect from the computer, reboot, launch ROM manager, flash clockworkmod, and then try to backup your current ROM again.
WoodDraw said:
Wait, is this your first time flashing a ROM? Walk us through what you've done so far.
I'm guessing you had your USB plugged in, and didn't get a good flash of clockwork. Unplug your USB, go into clockwork, and flash the latest version of clockwork. Then reboot, go back into clockwork, try to backup and see what you get
Click to expand...
Click to collapse
Yes this is my first time.. I have never really had the motivation to, but I want froyo really bad so I am trying to get this down. I don't really know what clockwork recovery is or how I get it, all I have is ROM Manager and a rooted Vibrant.
DanglaGT said:
I am trying to install the new Obsidian based on froyo 2.2 with the Samsung Vibrant. I rooted it using the one click root and downloaded ROM manager. When I try to back up my current ROM the phone reboots and says E: Can't open /cache/update.zip (bad) Installation aborted.
Because of this I cannot install the Obsidian ZIP file because the same error message pops up.
Click to expand...
Click to collapse
Read my other post... don't check either one.. back up all your stuff with pc or titanium. I used tbu its wonderful.
sgsV bionix.. If ya don't got it GET IT!
DanglaGT said:
Yes this is my first time.. I have never really had the motivation to, but I want froyo really bad so I am trying to get this down. I don't really know what clockwork recovery is or how I get it, all I have is ROM Manager and a rooted Vibrant.
Click to expand...
Click to collapse
One in the same here brother. Read my posts before. I'll try to help you through here, but you are in the wrong section, and this post isn't long for this world. A couple tips for you:
1) Read up on these programs you are using. Thankfully you're dealing with a mostly unbrickable phone, but I don't think anyone here is looking forward to walking you through an Odin recovery. You can **** stuff up. Write that down on a piece of paper in front of you.
2) Read the forum guidelines. People will be a lot nicer if you post in the correct forum.
Ok, sorry for not posting in the appropriate forum. I think I got it and my mistake was not flashing clockwork because when I backup my current ROM I no longer get that error. Right now I am using Titanium Backup to backup my stuff and then I am going to try the Obsidian flash again.. but does the Titanium Backup save my text messages?
DanglaGT said:
Ok, sorry for not posting in the appropriate forum. I think I got it and my mistake was not flashing clockwork because when I backup my current ROM I no longer get that error. Right now I am using Titanium Backup to backup my stuff and then I am going to try the Obsidian flash again.. but does the Titanium Backup save my text messages?
Click to expand...
Click to collapse
Good, good. A bad clockwork flash is the only thing I've ever seen cause that error message. At least you've given a good google reference for other people that mess that up.
I've never used Titanium backup for anything other than app backup, so I don't know about texts. I believe it can be done, but I don't know what to select. Maybe take a look in the market? I think there are some SMS backup apps there if that's all you're concerned about.
OP -
I had the exact same problem as you, and I tried everything. Surprisingly enough, what fixed it for me was how I copied the ROM zip file to the phone. When I mounted the phone to the computer and dragged and dropped, I got the error. I had tried copying the file at least 3 or 4 times this way, and I always got the error. The error went away when I decided to try an ADB push of the zip file to the Internal memory card. I still don't know why it fixed it for me, but it's worth a try.
DanglaGT said:
Here is what I did:
1. One-click root
2. Download ROM Manager from market
3. Downloaded Obsidian and placed it on my SD card via USB
4. Opened ROM Manager and clicked Backup current ROM, which is where i got the error message that /cache/update.zip could not be read
5. Tried to install obsidian by clicking Install ROM from SD Card and choosing the obsidian that I put on my SD card and I get the error saying /cache/update.zip could not be read (bad) installation aborted.
Click to expand...
Click to collapse
Wrong section dude. But um when you said u only opened rom manager to press back up current rom?..if so you got that error cause the wrong update.zip is on the root of sd...go back to rom,manager and click flack cwm click allow when it asks for root,n then pick the vibrant one.
OP - Do not worry about backing up your current ROM. You are going to 2.2 and your ROM now is 2.1. IF you decide to go back to a 2.1 ROM flash an all new one (ie. Bionix Fusion or Final) that comes with a 2.1 Kernel. If you try to go to your backed up ROM though Rom manager without getting a new kernel you will soft brick your phone, and as you stated this is your first try, a soft brick can be a little scary. To be on the safe side delete your backup in your phone now so you won't forget and be tempted to go back to that old ROM without the proper kernel installed and ready to be flashed also in your phone. Just wanted throw that out there for ya!
Anderdroid said:
I use ROM Manager like 50 times a day and my SD card never gets wiped.
Click to expand...
Click to collapse
+1. Never had an issue with my sd being wiped. I use clockwork at lest once a day.
Sent from my SGH-T959 using XDA App
Thread moved to Q&A.
Maybe it's a noob question, but after update to 2.2, how do I revert all the apps and games I have currently on Bionix 1.1. I can reinstall them, but what about save states? Any way to transfer that when update is done to Froyo, or we always need to start from scratch on every new update?

[Q] Ok..so I grew a pair and I'm rooted and backed up. (( update.zip question ))

I was in Clockwork Recovery after backing up my stock system (this is my first time) it gave me the options in green text: Reboot, reinstall update.zip, etc.
I chose reboot and everything loaded up fine and after checking in Rom Manager I have a backup of my system. I just want to know if that was the right choice. or should I have reinstalled update.zip
I guess my question revolves around update.zip.
What is that file? I know I originally used it to gain root access but do I need to reinstall it from clockwork recovery everytime before rebooting? and when should I delete it? and are there any negative consequences for not doing either?
As you can tell I'm a noob....but hey I can't believe I'm rooted and backed up at the moment. I'm gonna stop here before flashing any custonm roms and get this question answered first.
I think you are fine. I would not worry so much, i have deleted the update.zip, but since you booted up into ClockWork Recovery you are most likely fine.
I am booted back up completely and the stock os is running and I'm still rooted. I just want to know what that option inside of clockwork recovery means. What is the reason to reinstall update.zip from clockwork recovery and what is the reason to reboot? And once I'm booted back up and running when/why do I go into my files and delete update.zip?
It's not that I'm worried...I just want to know why I'm doing what I'm doing.
I would keep the file. Less chance of failure.
You are only going to use cwr for this:
Backup/restore system
Wipe cache, factory wipe, etc
Flashing rom's (install from sd card)
Don't worry about the other stuff.
I'm confused by the op, not sure how you made a backup from how it reads.
I think I made the backup by flashing into clockwork recovery from rom manager. It started with the purple text recovery mode and I hit reinstall packets. Then it went into the green text clockwork recovery....I think. I've only done it once.
So in clockwork recovery I choose the backup/restore option and then the backup option. So then the phone I assume began the backup process and displayed many lines of white text. At the very end it said something about not being able to mount my ext sd card (which) had me worried.....but then it brought up the menu again. The top option was reboot, the second was reinstall update.zip and I didn't pay attention to the rest because I was pretty sure I needed one of the first two....I just didn't know which one. I selected reboot and the phone then booted into the stock os and was still rooted. Is the fact that it wasn't able to mount my ext sd card at the end of the backup process an issue? I'm able to find a backup in rom manager. Also, if the backup process works correctly should the phone reboot by itself?
What I'm asking is what am I booting from when I choose "reboot" from clockwork recovery and what does it mean to choose "reinstall (packet?) update.zip"? I thought update.zip was what I needed to root.
This last step wasn't in your tutorial (purple text menu) so maybe something didn't go as it should have.
I'm not sure.
Thanks s15274n for the tutorial btw. Its by far the most helpful concise instructions I've found and is really appreciated.
Sent from my SGH-T959 using XDA App
The update.zip in the root of the internal SD card is clockwork recovery (CR). When you install CR it does not overwrite your phone's recovery. What it does is install that update.zip in the root of the SD card. When you want to use CR, you need to "update packages" which will flash that update.zip which contains the CR package. That will load CR into memory only and still does not overwrite the original recovery on the phone. When you reboot into recovery from ROM Manager, it automatically reboots and applies the update.zip and places you into CR. If you enter recovery manually (via buttons on boot), you will need to "re-install packages" from the stock recovery to get CR.
So if you want to use CR, keep that update.zip in the root of the SD card. If you erase it, you will need to re-install it (using ROM Manager) before you can use CR instead of the stock recovery. I hope that makes sense. If not, here is the explanation straight from Koush on how it works.
http://forum.xda-developers.com/showthread.php?t=734164&highlight=clockwork
^^ You are all good then.
The SD-EXT is not going to backup, because you do not have a partiotion on your external SD card (no need for one, like some other phones require). This is normal from what you described.
You will never use the apply update.zip option in CWR... just dont pay any mind to it.
When you select reboot system now, that is all it is.... you are basically saying "Cool, I did everything I needed to do (backup/flash a rom/wipe, etc)... and now I am ready to reboot my phone... ie, you are basically cutting your phone on.
Positive you did, but you can open rom manager, click on manage backups and you should see a file there that has a format kinda like YYYYMMDDTIME, that is the backup you made... no action needed, just an easy way to verify you made a backup of your system.
s15274n said:
I would keep the file. Less chance of failure.
You are only going to use cwr for this:
Backup/restore system
Wipe cache, factory wipe, etc
Flashing rom's (install from sd card)
Don't worry about the other stuff.
I'm confused by the op, not sure how you made a backup from how it reads.
Click to expand...
Click to collapse
Thanks s15274n
i have been wondering the same thing about the update.zip file whether to keep it or not.
Thanks s15274n for the tutorial btw. Its by far the most helpful concise instructions I've found and is really appreciated.
Click to expand...
Click to collapse
Also wanted to say i feel the same way. Appreciate the guide so much!
Thanks guys. I'm glad to have that cleared up so I understand it. Gives me more confidence to do the other things I want to do.
I got confused with the fact that I need to delete the update.zip file after rooting and the fact thats its there again after flashing cw and backing up.
Sometimes I need things spelled out for me. Makes complete sense now.
Sent from my SGH-T959 using XDA App

[Recovery ROM] 8gb and 16gb Versions [CWM Backup][Unregistered B&N store][6/1/12]

Due to the number of people not reading the below instuctions, I am putting this annoyingly large font right here.
NOT A FLASHABLE ZIP. MUST EXTRACT Clockworkmod Folder to SD and recovery from CWM. Watch the video...
I pay to host these files. Donations are greatly appreciated if these have helped you.
This is a Backup Image of a stock BN NOOK Tablet after just flashing NT16or8gbV4.6 Root to it.
Demo of 8gb use of this hack! http://www.youtube.com/watch?v=0HC9XL_9aXk
Do not Mirror files.
16gb 1.4.0(NT250)Download Rom file:CWMrestore_1_4_0_ plus NTV16gbV4_6
MD5 Sums: Soon
8gb 1.4.2(NT250A)Download Rom file:CWMrestore_1_4_2_plus NTV8gbv4_6
MD5 Sums: Soon
Apps included in Root Process:
1. ADW
2. Amazon Appstore
3. Anycut
4. Home Manager
5. ES File Explorer
6. Spare parts
7. Homecatcher
8. NT Hidden Settings app
9. Titanium backup
10. Custom Keyboard
11. Live wallpaper
12. 3d Gallery
13. Nook Recovery Flasher
14. Nook Unrooter
This ROM can Also be used to easily restore back to FACTORY STOCK
How:
1. Extract Clockworkmod folder from zip file to root directory of SD card
2. Boot into CWM
3. Flash Rom w/ CWM Recovery
4. Use recovery flasher to flash stock recovery (16gb ONLY, skip this step for 8gb)
5. Run Unrooter
6. Bam!= Factory stock
This ROM can also be used to restore from a bootloop or bricked device
1. Use Root SD card to boot into CWM from SD Card
2. Flash Recovery
3. Bam!= Stock +NT16or8gbV4.6 Root
Video Demonstration- http://www.youtube.com/watch?v=YQfOswBrXIg
Video on how to restore to stock from CM7 using this file: http://www.youtube.com/watch?feature=player_embedded&v=mMj67tgGlew
Donate ;P and hit thanks
reserved for future use
people have been asking so i did it, made a video on how this can be used to restore back from CM7
This saved the day, after I restored my nandoid of rooted stock I lost all access to the barnes noble shop and could not access anything related to barnes and noble. I read of other people restoring there's back to stock and re rooting after experiencing the same issues as I to fix that issue. I knew there was an easier way and restoring this nand was it, seeing your back up was never registered in the first place. Your the man and I will be donating!
Sent from my BNTV250 saved by Albert's recovery rom.
Not working. Nothing working.
Ooo
Will you make one for 1.4.1? Or is there that much of a difference? Thanks for your work man!
jenuhferr said:
Trying very very very hard to do a factory restore but don't know how to do this:
3. Flash Rom w/ CWM Recovery
4. Use recovery flasher to flash stock recovery
5. Run Unrooter
Put file:CWMrestore_1_4_0_ plus NTV16gbV4_6 in sd card, booted into cwm. In video you have two cards. Not sure which card this one is and what to put on other card. Assume that this file is an update or something and now doesn't require two?
Trying to do factory restore and don't know how to do above. Chose zip from sd card, chose cwmrestore zip file and then it finds and starts to install then it is aborted. I have no idea if I'm even supposed to be doing this but there it is.
I have tried so many things from simple (the simple failed reboots method to very complex methods that I tried to follow very closely) and read so many threads and watched so many you tube videos that I can't even tell you how many things I've tried. Nothing works at least the way I'm doing it. I need to get this back to stock and start over because it is really f'd up. I think it was due to a bad sd card I used from the beginning.
Thanks for any help.
Click to expand...
Click to collapse
Can you access clockwork?
Sent from my PC36100 using xda premium
I can't get this to work with CM7. After choosing the zip file it goes through, but ends up with "Installation aborted."
I also tried wiping dalvik, cache, and format system, but nothing will wipe CM7 and return to stock.
What I when I select update from .zip file:
-- Installing: /sdcard/CWMrestore_1_4_0_plusNTV16gbV4_6.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
you have to unzip and extract the clockworkmod recovery folder to your root sd card...
albertwertz said:
you have to unzip and extract the clockworkmod recovery folder to your root sd card...
Click to expand...
Click to collapse
Not quite sure how. The recovery folder consisting of the etc folder and one file, recovery-from-boot.p, goes to the root and the rest of the zip goes to the recovery folder and renamed to factory.zip?
When I do that, it still brings up Cynaboot and I'm presented with the menu. Choosing zip from card and trying to update by choosing factory.zip still goes to the previous Installation aborted error.
---Update--
Wait, I'm mixing up restore methods, as I've tried a number of ways to restore to stock.
I'm in the process of trying to restore by copying to the root of the sd as you recommended.
Not sure what to do next
I decided to use the CM7 from the sd. I worked through this restore, however, I got the following message after it processed through restring .android_secure:
Error while restoring /sdcard/.android_secure!
I tried it again and keep getting the message:
Checking MD5 sums...
MD5 mismatch!
Not sure what to do next...any assistance would be greatly appreciated.
sangahm said:
Not quite sure how. The recovery folder consisting of the etc folder and one file, recovery-from-boot.p, goes to the root and the rest of the zip goes to the recovery folder and renamed to factory.zip?
When I do that, it still brings up Cynaboot and I'm presented with the menu. Choosing zip from card and trying to update by choosing factory.zip still goes to the previous Installation aborted error.
---Update--
Wait, I'm mixing up restore methods, as I've tried a number of ways to restore to stock.
I'm in the process of trying to restore by copying to the root of the sd as you recommended.
Click to expand...
Click to collapse
It worked beautifully. I had to Backup using CWM first to check on the folder structure, and saw that it was all neatly placed as-is in the zip folder. Restored and am now back on stock (and using CM7 on SD card).
Thanks!
new 8gb rom recovery on OP
NT8 recovery will not boot
albertwertz said:
new 8gb rom recovery on OP
Click to expand...
Click to collapse
I am EXTREMELY sad to report that the new "backup" image will not boot on my NT8.
I went through all the steps and CWM flashed the backup without any errors. It then returned to the main menu and I hit "Reboot System."
It just turns off (or goes into a sleep mode.) Nothing but a black screen. The Nook Power cable displays the yellow-red that seems to suggest that it is in a SOD.
I have tried every iteration of powering off for 30 secs and then trying, with/without the SDCard, with/without the Nook Power adapter, and nothing will turn it on.
However, as soon as I put either @meghd00t's NEW recovery SD or my CM7Alpha SD, they boot up without problems.
I CAN do ADB if there is a command that I need to issue to clear some register on the device? Anyone know what I should do?
Ray
After rooting with your sd i can`t access settings-keyboard, error: The aplication Settings has stoped bla bla bla...i wouldn`t bother, but i really need russian keys sometimes...(
btw, thanks a lot for booting cwm img and for recovery zip for sure too, saved me from brain damage)
PS: Nevermind fixed that by running any cut, creating shortcut and adding russian
i have a 8gb nt and i tried unbricking using this method... flashed recovery... and still stuck at the n screen. does not move past it.
Do I flash the rom or put the folder on sd card and restore if I am trying to do the unbrick process on my 8gb nt? I tried the restore but still just get stuck at the n screen.
any help would be appreciated.
mak0305 said:
Do I flash the rom or put the folder on sd card and restore if I am trying to do the unbrick process on my 8gb nt? I tried the restore but still just get stuck at the n screen.
any help would be appreciated.
Click to expand...
Click to collapse
Unzip the file and use clockworkmod to do a restore..
Thats what I have already tried... But im gonna try again, maybe I messed something up...
after flashing recovery, try clearing cache and devlik while in CWM, then reboot.

Categories

Resources