Hey guys. This is my first post on this forum, although I've been lurking for quite some time.
When 2.1 had just come out, there was an X10 flasher that would flash 2.1 to X10a phones, which was great for people like me who were on AT&T and hadn't gotten the update yet (and STILL haven't). I noticed that there's a 2.1 rom for the X10a and I was wondering if there's any reason I should switch over to that. If so, can I just use the flashers listed over in that forum, or is there something I need to do to my X10a now that it's running an X10i firmware?
This is sortof related, as well. I want to install xrecovery, so I downloaded the Busybox installer from the market, but it won't install. Surely not because of my X10i firmware, eh?
I apologize for the newbie questions. This is my first android phone and I'm still learning all of the intimate details of the OS.
naezwood said:
Hey guys. This is my first post on this forum, although I've been lurking for quite some time.
When 2.1 had just come out, there was an X10 flasher that would flash 2.1 to X10a phones, which was great for people like me who were on AT&T and hadn't gotten the update yet (and STILL haven't). I noticed that there's a 2.1 rom for the X10a and I was wondering if there's any reason I should switch over to that. If so, can I just use the flashers listed over in that forum, or is there something I need to do to my X10a now that it's running an X10i firmware?
This is sortof related, as well. I want to install xrecovery, so I downloaded the Busybox installer from the market, but it won't install. Surely not because of my X10i firmware, eh?
I apologize for the newbie questions. This is my first android phone and I'm still learning all of the intimate details of the OS.
Click to expand...
Click to collapse
There is no reason to switch if you are happy with your current FW. However, if you want, yes you can choose the flash tool on here to switch from one 2.1 version to another. Regarding busybox, you need to be rooted to install it.
I'm rooted. I think the problem with busybox is my microsd is currently in my nook. I just rooted it yesterday.
Anyway, the reason I want to switch firmware is because I'd like to try out some custom roms. I just wanted to make sure there wasn't anything I needed to do other than use the flasher before flashing my phone. My friend somehow managed to screw up his Xperia the other night when flashing the old 1.6 rom. We're still trying to figure out the problem.
naezwood said:
I'm rooted. I think the problem with busybox is my microsd is currently in my nook. I just rooted it yesterday.
Anyway, the reason I want to switch firmware is because I'd like to try out some custom roms. I just wanted to make sure there wasn't anything I needed to do other than use the flasher before flashing my phone. My friend somehow managed to screw up his Xperia the other night when flashing the old 1.6 rom. We're still trying to figure out the problem.
Click to expand...
Click to collapse
You can NOT flash from 2.1 to 1.6 with the normal method. You need to download the AT&T unbrick FW and use it with the flash tool. Hopefully, this will solve your friend's problem.
Thanks so much! I'm going to test it out on mine before I try to tell him how to do it (he's not very tech savvy. haha).
I have to disagree. I have ATT and I originally flashed the x10a Brazil Generic and I had Voice Search. I just tried the newest x10i .24 update and I lost the Voice Search (google app that is only currently available in the USA and Froyo 2.2 or with factory software). I just flashed back with the Global x10a and the Voice Search tab (microphone) showed up for a second on first start, but quickly disappeared and the normal tab (magnifying glass) showed up. I am currently searching to forums looking for the Brazil x10a version to reflash my phone and get my voice search back...it is far and away the best feature on my phone...I hope I can find it.
Related
my service provider is atrocious (3mobile Australia) as they still haven't released the proper update for my X10a. I havent really fully understood the process because there is too much information i.e. old/new/contradicting/too difficult/too many problems... so i decided that i might take the plunge and follow this simple one here on this site
Code:
lazeroth4th.blogspot.com/2010/11/as-in-my-previous-post-ive-said-that-i.html
(sorry if im not allowed to post that link....)
heres some questions i have
i was wondering if i use the global generic firmware will that affect me in any way? I've heard of people haveing trouble with mediascape and timescape not working and needing to be installed in complicated methods
after flashing it to the global generic FW will i just be able to use SEUS to upgrade my 1.6 X10 to 2.1?
Will i be able to upgrade my phone as SE rolls out more updates?
will i be able to come back to my Australian firmware? if so, how can i do that?
please bear with my noobishnes....i've spent at least 8 hours looking at different sites and i just wanna make 100% sure i want to do this...
dpt90 said:
my service provider is atrocious (3mobile Australia) as they still haven't released the proper update for my X10a. I havent really fully understood the process because there is too much information i.e. old/new/contradicting/too difficult/too many problems... so i decided that i might take the plunge and follow this simple one here on this site
Code:
lazeroth4th.blogspot.com/2010/11/as-in-my-previous-post-ive-said-that-i.html
(sorry if im not allowed to post that link....)
heres some questions i have
i was wondering if i use the global generic firmware will that affect me in any way? I've heard of people haveing trouble with mediascape and timescape not working and needing to be installed in complicated methods
after flashing it to the global generic FW will i just be able to use SEUS to upgrade my 1.6 X10 to 2.1?
Will i be able to upgrade my phone as SE rolls out more updates?
will i be able to come back to my Australian firmware? if so, how can i do that?
please bear with my noobishnes....i've spent at least 8 hours looking at different sites and i just wanna make 100% sure i want to do this...
Click to expand...
Click to collapse
In regards to issues with mediascape and timescape i had no issues. Well i never had to issues apart from laggyness at the beginnig which is expected. Youll be able to update as normal via pcc or seus. In terms of Australian firmware you can as long as your rooted, there is a thread in this forum on how to do this.
Sent from my X10i Quadrant 832 using XDA App
anther question sorry......
I found an app called androot that roots my phone in the push of a button without the long process. and it installs something called superuser. is that a viable means of rooting my phone or is there a difference in the result of the two methods...
Seen alot of blogs explaining how to update the android of Dell streak phones from AT&T and O2 but none for the Rogers with build number 7921.
Well i spent some time when i got my new phone to find out how to do it and to my surprise it was hard to find how to but easy to actually do it.
Only to follow 2 different site tutorials to get this done.
1. Follow the last part of the tutorial to get your streak to version 6601 ATT&T
after this phrase "If you just wanted to revert to O2 1.6 (build 4399) then you are done. If you are going to AT&T 1.6 (build 6601) we have to change the system so it will upgrade the the AT&T ROM."
http://forum.xda-developers.com/showthread.php?t=805112
once you got your streak to 1.6 ATT&T build 6601 you must follow a simple tutorial with interactive video and even has a video so you can make it work with your win7 X64 witch alot of tutorials don't help with.
2. Follow this part to the letter and if you have trouble they have a FAQ section and even supply all the files you need.
QDLTool Visual Tutorials (for Windows only)
http://streakdroid.com/?page_id=92
In this second part all you have to do in general is set up all your needed drivers and stuff in windows then open the program and press RUN. Just make sure you do all the steps without missing one.
No need to go through the fastboot or recovery menu in this part.
And it gives you Full US version of android 2.2 from a locked version of Rogers android 1.6.
Hope this will help my fellow Canadian Streakers
Thanks for Taking time to do this for fellow streakers
lufc said:
Thanks for Taking time to do this for fellow streakers
Click to expand...
Click to collapse
No problem. It's my first one ever so i hope i passed to hole point and helped some (dell irritated) people.
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
kantras said:
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
Click to expand...
Click to collapse
The only problem i have now is i can't seem to change or hear the notification when i go into the menu to see them.
Also i heard the gps doesn't work on some models but i haven't inserted the sim card because i'm waiting for the rebel to come in the mail but without the sim card the gps doesn't work for me.
The notifications setting and brightness are fixed in steves newest rom
Sent From My Rooted Dell Streak Using Xda App
ok i see i can upgrade to steve's 1.5.3 only thing is do i use the one with AMSS or the V2.1 baseband
I'm unlocking it with a Rebel simcard
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
alexmoi said:
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
Click to expand...
Click to collapse
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Hey...I have the rogers streak and was wondering if I update to dj steve's custom rom will i run into issues when the actual Rogers 2.2 comes out? Will I be able to put the stock version back on? I am a bit worried for warranty purposes as well...can it be brought back to stock or is it a one way ticket? Reason I ask is I also have several phones including a Rogers Acer liquid e and unfortunetly can't go back to the stock version of froyo because of some thing Acer and Rogers did in the update that recognizes the fact my phone was rooted and not running a rogers baseband or something like that...I just sold my Galaxy s because I was sick of dealing with Samsung and their issues....So from what I can tell Rogers is only releasing the froyo update in late spring and 3-4 months is crazy considering most of the other countries already have froyo on their streaks...Man Rogers is so bad for their updates...Anyways...can i temporarily update to the leaked versions or should I wait? Thanks
maek_it_happen said:
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Click to expand...
Click to collapse
you are correct. if you want to use the rebelsim, you HAVE TO use the no baseband version. 1.5.3 is the latest version
thanks for the great guide, I just got mine today and its already running 2.2 on 318 baseband
its true that u can qdl from any version though so I went straight from 1.6 to 2.2 prerelease then to 318 using the link in the streakdroid guide for beyond qdl
Sent from my Dell Streak using XDA App
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Archeob said:
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
rptw said:
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
Click to expand...
Click to collapse
You're exactly right. I spent an hour reinstalling StreakDroid 1.6.0 with different DPI settings before giving up in frustration, but I found the settings menu for ADW the next day. I used a 6 x 6 grid and disabled automatic stretching, and that way my picture frames look perfect.
Great work on the rom guys! My Streak feels much more smooth and responsive than under stock 1.6.
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Archeob said:
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
Also check your density on the 1.6 streakdroid install. when i used us120 or denisty120- -160 they were to far apart. i also found that US180 didn't work the phone wouldn't boot. i had to use density180 vs us180 and everything is perfect. right amount of space. i installed just gingerbread stock launcher and im using the adw ex launcher its the best in my eyes.
cue_32 said:
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Click to expand...
Click to collapse
Thanks...I still may wait though...I rooted my Acer liquid e and also just picked up a Samsung Captivate to play with and use as a back up..streak is so big...lol..nice to have a phone that fits in your pocket..... and since selling my GTi9000 i kind of missed it.....I love the streak and really don't want to void the warranty or better yet brick either...I am going to treat my captivate to the lagfix for now and maybe try gingerbread on my Liquid e...Been doing some reading and they are almost there...Still a few bugs however should not be long before they are worked out...As you probably noticed i love phones and have had like 30 phones in the last year...lol...Streak is my favorite so far...Have not touched my laptop much since i got it..Any news on when Rogers will come out with the official version of froyo? I read someone that April is the soonest? Anyone here anything else? I hope they come out with the update shortly ...otherwise I may be forced to root it...Any news would be appreciated..Cheers
umar.ranjha said:
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Click to expand...
Click to collapse
Pull the battery out and put it back in.
If the streak looses power, it will be stuck in a power off state and plugging in the cord will do nothing.
After you reseated the battery, you should be able to charge the device again.
After it is charged, follow from where you left off.
Hi guys. I think I have some pretty specific questions so I'll just go ahead and ask. Also this thread can hopefully help other AT&T users.
1. I've already used the Flashtool guide to get to Android 2.1 and I've rooted it. What I really want though is just the straight update from Sony Ericsson to 2.1. Now that the phone is no longer locked down with AT&T 1.6 software is there a way to simply install the official SE 2.1 update?
2. If I do have to stick with the update in the Flashtool guide should I do the customize option for JIT? What are the pros and cons?
3. Anything else I need to know? Basically I want the phone working 100% but running 2.1 instead of 1.6, I'm fine with the AT&T apps not being installed.
Thanks for any and all help!
Have you tried connecting your phone to SEUS/PC Companion, and do a factory reset? (not sure it will install 2.1, but if it doesn't, just update it through there)
but.. and this isn't scary at all, just install a good (wolfbreak's for instance) 2.2 ROM. You will notice a significant performance boost, with no downsides actually (can't think of anything not working)
edit:
but then again, i just noticed that at&t users cant use seus...(didnt know that...)
sooo.. just take a leap of faith and go for 2.2
where can I find wolfbreak's 2.2? and will it be as easy to flash as 2.1 was in the guide?
It depends on what you find easy. You do not need flashtool (as long as you have the 54, 55 or 58 Baseband.
To check what baseband you got, go to phone settings --> about the phone --> scroll down, and it should say baseband 2.*.** or something like that the last two asterisks is what matters.
(if you do not have the appropriate baseband, download the one you want from here, and install it with Flashtool)
Now, before you can install this ROM, you first need xRecovery, this program can be found here, along with a howto install guide
After you've successfully installed xRecovery, it is time to download the files from wolfbreak. His ROM can be found here.
Download:
- CM 6.1.3 [v05].zip for Baseband 54/55/58
&
- CM Update v053.zip [Will not wipe anything]
Place those files on your SD Card.. Now you can follow the 'Howto install' guide from wolfbreak
(oh btw, to enter xRecovery you have to do the following:
Press BACK button few times right after white SE label appears.)
kernelklink said:
where can I find wolfbreak's 2.2? and will it be as easy to flash as 2.1 was in the guide?
Click to expand...
Click to collapse
Its in the x10 android development section. Its one of the top links for in that section. I personally use rendeiro2005 ROM 2.2 cuz of personal looks. Hope this helps.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
so wolfbreak should be 100% working correct? no hardware problems?
what about rendeiro2005?
another thought...since these aren't from SE won't I lose timescape and mediascape? or is there some way to install them after the fact?
kernelklink said:
another thought...since these aren't from SE won't I lose timescape and mediascape? or is there some way to install them after the fact?
Click to expand...
Click to collapse
there is a thought.. mediascape is laggy, and you can get timescape
http://www.mediafire.com/?bxcc12wq10o2z0o
Ok, here's a good question. If I wait until the 2.3 update is released from SE and plug my phone up to SEUS will my phone be brought back to AT&T factory settings or will it actually be updated to 2.3 (now that I'm running a generic ROM)?
What I'm getting at is: Now that I'm running a generic ROM will SEUS try to update to new generic ROMs or will it somehow know the phone is AT&T and keep trying to go with what AT&T is currently using?
No, your phone is debranded after flashing so you can install 2.3.3 with no problems
so that means that if I plugged up to SEUS right now it'd give me the SE 2.1 update correct?
I'm currently running the 2.1 from the flashtool tutorial, but I'd like the official SE 2.1
I'll go ahead and answer my own question. Yes, apparently once you debrand your phone you can simply go to SEUS and update to the latest SE update.
I'm now running 2.1 straight from Sony Ericsson
I'll wait for the 2.3 update and get it through SEUS when it comes out this summer.
have looked at other q and a but not found what im looking for yet.
I have an
X10i
2.1 updated1
2.0.49
Ages ago I flashed to R2B002 and all was good in the world. Then came along the Gingerbread update so I thought I had nothing to lose and gave it ago.
I hated it and thought I would simply flash back to my backed up zip of R2B002
This is where it all went wrong. Once rooted, and installed R2B002 I started to set it up again as I couldnt get any signal, it would not let me setup any APN's
I noticed no matter what ROM I installed it would save Baseband unknown?
So I have flashed back to 2.1 updated1....and with it the old bugs that made me change in the first place.
So I assume (Noob) that its because the baseband is not matching?
So I flashed .435 with 2.1 and R2B002 and get the same thing..."Baseband Unknown" and cannot setup any APN's
What am I doing wrong? I have been using Flash Tool for X10 and everything looks good.
Appreciate it if anyone can point me in the right direction please
I am contemplating trying the new Gingerbread rom but ...... until It can be rooted I wont....unless there is a rooted GB Custom ROM out there for X10?
Thanks heaps .... sorry if ive missed out any info that would help in a better answer...
Finally! Sortted!!
Great way to learn jumping in boots and all
Hi all ive had my x10 for 6 months and experiencing a few problems.
The phone is very slow, the touch screen doesn't react great and messaging is awful slow.
I cannot install flash for it, for example I wanted to install sky sports news and watch it on my phone but it said i need flash, i tried to install it and it says doesn't support it.
Im running Android 2.1. Also, can we get froyo or gingerbread on this phone?
Thank you.
Just search the forum mate lots of custom roms froyo and gingerbread, have a look around see whats best for you, guys on here will help if you get stuck, but please use search first
Sent from my X10i using XDA Premium App
richardvilla said:
Hi all ive had my x10 for 6 months and experiencing a few problems.
The phone is very slow, the touch screen doesn't react great and messaging is awful slow.
I cannot install flash for it, for example I wanted to install sky sports news and watch it on my phone but it said i need flash, i tried to install it and it says doesn't support it.
Im running Android 2.1. Also, can we get froyo or gingerbread on this phone?
Thank you.
Click to expand...
Click to collapse
Upgrade it to gingerbread 2.3.3 for x10, either by SEUS (depending on your provider) or via flash tool in the development forum. Or a custom GB rom of the many right in the development forum.