I rooted my Vibrant yesterday, first timer, and everything went smoothly. I used the Classic way, had no problems. I got ROM Manager, to flash ROMs of course (I've gotten pretty impatient with Samsung and my Froyo) and I decided to partition the SD because I thought it would be a good idea. I did not know that it would partition the INTERNAL SD and brick my phone. After countless hours of Odin, rereading the instructions on this thread, trying to get it back to stock, I managed to get it running Eugene's Unofficial TMO Froyo Image. I am able to boot [Froyo] totally fine, but then when I try to revert back to build JFD or J16, I get the same black screen with only the capacative buttons on. My question is, is there any other possible way to fix this? I've tried almost every single method I've come across, read so many threads, and I've been unable to get back to stock. I've even created an elaborate scheme to walk into T-Mo to tell them I dropped my phone (playing the technologically disabled customer, of course) and asking for a replacement. I apologize for so much text, but I felt that explaining myself might work. Ideas would be much appreciated
With Odin -
Use this 512.pit
and this JI6.tar
These will take you to bone stock 2.1.
Thanks Drew, but I've tried that countless times and all I end up with is a black screen and lit up capacitive buttons. I want to go back to stock because for some reason, Eugene's version of Froyo doesn't allow me to install apps because the supposed, "internal memory" is full. Plus, going back to stock will allow me to redo everything from the beginning.
make sure you flash a 2.1 compatible kernel 1st before downgrading from 2.2 to 2.1..
Try flashing "Eugene's Froyo that doesn't brick" on odin then flash JFD/JI6 whichever you wanna go back to..
WARNING: Flashing Froyo that doesnt brick will wipe internal SD..
Good luck..
$0.02, why not just flash the rom you want over the stock 2.2?
just factory reset, wipe partitions, wipe dalvik cache, fix permissions ALL in CWM
Then flash ROM of choice.. Clean flash.
Can you link that file for me please?
Also, I just factory reset, and I'm still unable to getapps from the market ,so flashing from 2.2 would be impossible. For app space, it says I have 0.00 B
Had same issue, didn't want to go back to stock though . Look for a post with mbr check sum error, quick walk through
Really? I looked it up, but i don't remember getting that error.message.
Related
I had zero problems when rooting and flashing my G1, but now with my Vibrant I am not sure what I did.
A few excellent stickies at the top but I seem to not be making any progress.
Here are the steps I took.
I had a stock Vibrant running 2.1
I downloaded ROM Manager, installed clockwork mod.
Did a backup of my current system ( was I supposed to do a clockwork AND nandroid?)
Downloaded and successfully installed a ROM called Blackhole 1.0
it runs ok but didn't give me the option to switch from 3G to EDGE data, and then I couldn't get internet access at all so i decided to restore my original stock vibrant system.
So I rebooted into recovery, selected restore (my phone won't go into recovery anymore for some reason) and waited, it took a while, then I rebooted (forgot to wipe), but it just got stuck on the Vibrant screen. So I booted into recovery mode again and wiped just user data not cache and rebooted, same thing stuck at Vibrant.
Now i keep hearing about something called ODIN, what I can tell it is some kind of flasher program for ROMS, nobody seems to give any kind of link or anything, is it greymarket or something?
So where am I now? I think the excellent noob guide needs to be updated a bit more.
My phone can get into download mode (whatever it is for i don't know) but it won't get into recovery mode anymore.
Everything you need is here: http://forum.xda-developers.com/showthread.php?t=771111
i think what happened to you is you flashed a 2.2 ROM then tried to revert back to 2.1 without doing the proper downgrading steps i.e. you did not flash a 2.1 kernel first.
but since you can get to download mode.. just flash stock JFD or JI6 through ODIN and you should be good.
good luck
Once you get back to stock don't give up on the 2.2 toms. Try axura or nero. They might have a few minor bugs but its way better then stock 2.1.
Powered by Axura with a dash of Voodoo
I have done the samething as you, coming from a nexus one it seemed easier to flash roms without worrying about downgrading kernels or what not. Recently I was on Nero froyo and flashed to a different rom, and tried to revert back but ended up stuck at the vibrant screen. Think it has something to do with voodoo lag.
Anyways I had to use Odin with the no brick froyo off ebproductions. Ran that and uploaded clockwork, reinstalled voodoo lag fix and was able to nandroid back to my Nero set up. Somewhat of a pain but once you've done it, no need to worry about bricking
xtone said:
Everything you need is here: http://forum.xda-developers.com/showthread.php?t=771111
i think what happened to you is you flashed a 2.2 ROM then tried to revert back to 2.1 without doing the proper downgrading steps i.e. you did not flash a 2.1 kernel first.
but since you can get to download mode.. just flash stock JFD or JI6 through ODIN and you should be good.
good luck
Click to expand...
Click to collapse
So the steps that are in this page?
http://forum.xda-developers.com/showthread.php?t=734475
GreggoryD502 said:
Once you get back to stock don't give up on the 2.2 toms. Try axura or nero. They might have a few minor bugs but its way better then stock 2.1.
Powered by Axura with a dash of Voodoo
Click to expand...
Click to collapse
Well as long as I can use Odin if I f-up royally like above then I might give it a shot.
Need to read about downgrading kernals or whatever. Might just wait for Cyanogen 6.1
Just so you know, the backup utility in Rom Manager (clockwork) is really just shortcut to a nandroid backup.
The way I have things set up for backups, and this is just for my personal convenience, is as follows...
I have a stock JFD ODIN rom to flash in case anything goes wrong. (A lot of people here will tell you to flash this whenever flashing a new rom. It is safer, and cleaner to do it this way, but not absolutely necessary)
I make a nandroid of my last stable rom (I only keep one at a time cause the files are huge) and keep a backup of that on my PC.
I backup all my apps and a few other things (call logs, bookmarks, sms) through Titanium backup. If you get the pro version, you can load it up after flashing a new rom and have it automatically restore all your apps in one click (system settings can be dangerous to restore when going from rom to rom, so be careful with those.) I also keep a backup of this on my PC.
I will also occasionally backup both of the sd cards to the PC.
Maybe overkill, but you probably wont ever lose anything forever.
thegreatcity said:
Just so you know, the backup utility in Rom Manager (clockwork) is really just shortcut to a nandroid backup.
The way I have things set up for backups, and this is just for my personal convenience, is as follows...
I have a stock JFD ODIN rom to flash in case anything goes wrong. (A lot of people here will tell you to flash this whenever flashing a new rom. It is safer, and cleaner to do it this way, but not absolutely necessary)
I make a nandroid of my last stable rom (I only keep one at a time cause the files are huge) and keep a backup of that on my PC.
I backup all my apps and a few other things (call logs, bookmarks, sms) through Titanium backup. If you get the pro version, you can load it up after flashing a new rom and have it automatically restore all your apps in one click (system settings can be dangerous to restore when going from rom to rom, so be careful with those.) I also keep a backup of this on my PC.
I will also occasionally backup both of the sd cards to the PC.
Maybe overkill, but you probably wont ever lose anything forever.
Click to expand...
Click to collapse
OK I will just do the long way from now on. I use this phone on AT&T, I was worried that I flushed $500 down the toilet but ever since i modded my first phone way back in the day i've been addicted.
Running Odin and my phone is in download mode, about to flash this b**ch.
wish me luck.
I flashed Odin on my phone to revert to stock. Re-Rooted it but now I can't flash Clockworkmod. Please help D:
use the update.zip posted here. You want B.
Hello,
I tried to recovery my phone by using Odin3 to install the stock 2.1 vibrant rom. I am using the rom from the official sticky about fixing a bricked phone.
Odin3 1.0 did not work and it would always freeze on a process even after trying it over and over again at least 5 times. So, I changed to use Odin3 1.7 which I found a link to on xda. This one installed successfully and went through the whole process and my phone rebooted. When it rebooted I saw the Samsung Vibrant Screen, then the T-Mobile screen then the Galaxy S screen fine like normal. But once it got passed the S screen a black screen would come up and all the button lights stay lit up and nothing happens for hours. I tried installing the rom several times, tried different links to the offical JFD stock rom, but everytime I try to install the same thing would happen. What do you recommend I should do to fix this problem?
wipe cache partitin , factory reset in rrecovery ?
Yes, I did. I wiped cache and data, but it still is is still stuck at the black screen.
Your using the JFD.tar in PDA and 512.pit in PIT and Repartition is NOT checked?
Yes, I made sure it was not checked and It was checked automatically the first time and I didn't realize that odin checks that automatically, so I unchecked it and did it a second time. The phone still gets stuck at the black screen with light up buttons.
I am trying the Eugene's Unofficial Froyo rom right now because what initially bricked my phone was installing 2.2 from Kies and that failing. When that failed I unplugged the phone and got the computer to phone icon screen and could no longer boot, so I went to install the stock rom.
The problem I am having with Eugene's Unofficial Froyo rom I am having now is that I have 0 space for applications and cannot install applicants even after doing a wipe and factory reset. Does this have to do with accidently setting it to re-partition and if so, how can I fix the no application storage issue so that I can install applications?
Thanks
I was thinking he designed this ROM just specifically to help bricked vibrants...I think you just use it as a means to reflash another ROM or back to stock or whatever.
I did what you had phone ! PC.. last night to my wife's phone....left it on that screen and plugged into pc with ODIN open..it showed a COM port so I flashed it like that and it boots right up.
I wonder if it has anything to do with Voodoo? I had a Voodoo Lagfix installed prior to doing the upgrade to Froyo 2.2 using the official method. May be why it failed. so I decided to flash back to stock. When I flashed stock 2.1 the phone would boot up then show the Vibrant Screen then the T-Mobile intro then the Galaxy S intro but once it got passed that the screen would go black and the buttons would stay lit up. I flashed Eugene's unofficial 2.2 ROM (no longer posted on xda, but it is on his website). That booted up perfectly, but the problem was that I now had 0 application storages and apps could not be installed on internal memory (could still install apps on SD card, I used this to install Rom Manager to the SD Card to flash Clockwork Recovery just in case)
Today, I tried flashing the Stock 2.1 rom back onto it (Phone was currently running Eugene's rom), but I have the same result with the black screen and lit buttons.
I looked at the FAQ for removing Voodoo and added a folder named "disable lagfix" in the Voodoo folder on the internal SD card. I ran this, but the problem still persisted, so I decided to flash again to see if it would be fixed. Still the same thing occured.
If this is a Voodoo problem, is there another method for removing Voodoo that I could try? I need to make sure that it is restored to the default RFS file structure that came with the phone and flash stock 2.1
Hmmm...odin back to eugenes froyo & unmount ur internal sd & format...go ahead and remove ur microsd & sim also...& then try to odin just the. Tar for jfd no pit ...no repartition..try to use ka6 instead of a 2.1..
Sent from Bionix V powered Vibrant
flash back to JFD eclair from bible with 512 pit and repartition ticked .
just for record JFD.zip goes in to pda
ViralCipher said:
I wonder if it has anything to do with Voodoo? I had a Voodoo Lagfix installed prior to doing the upgrade to Froyo 2.2 using the official method. May be why it failed. so I decided to flash back to stock. When I flashed stock 2.1 the phone would boot up then show the Vibrant Screen then the T-Mobile intro then the Galaxy S intro but once it got passed that the screen would go black and the buttons would stay lit up. I flashed Eugene's unofficial 2.2 ROM (no longer posted on xda, but it is on his website). That booted up perfectly, but the problem was that I now had 0 application storages and apps could not be installed on internal memory (could still install apps on SD card, I used this to install Rom Manager to the SD Card to flash Clockwork Recovery just in case)
Today, I tried flashing the Stock 2.1 rom back onto it (Phone was currently running Eugene's rom), but I have the same result with the black screen and lit buttons.
I looked at the FAQ for removing Voodoo and added a folder named "disable lagfix" in the Voodoo folder on the internal SD card. I ran this, but the problem still persisted, so I decided to flash again to see if it would be fixed. Still the same thing occured.
If this is a Voodoo problem, is there another method for removing Voodoo that I could try? I need to make sure that it is restored to the default RFS file structure that came with the phone and flash stock 2.1
Click to expand...
Click to collapse
When you do the disable lagfix are you rebooting and letting it convert the filesystem back to rfs or are you just powering down and going to d/l mode and trying to ODIN? You need to reboot the phone and let Linda do her thing and power up, then power down etc etc..
jmcghee1973 said:
When you do the disable lagfix are you rebooting and letting it convert the filesystem back to rfs or are you just powering down and going to d/l mode and trying to ODIN? You need to reboot the phone and let Linda do her thing and power up, then power down etc etc..
Click to expand...
Click to collapse
Yes, I rebooted after applying the disable lagfix, but it booted normally and didn't seem like it was doing the Linda thing....I wasn't sure if it worked or not. How would I know if it is back to using the RFS system?
I tried different roms and I had no luck. The KA6 Rom that flashes via odin installs fine, but it goes to the Recovery Screen the E3 one I think, and when it tries to mount DATA and other partitions it fails to do so, and somethings fail to be wiped. It doesn't boot.
When I run the JFD odin, when it goes to recovery for the first time it has one error where it fails to wipe DATA. Not sure if these are the reasons why I am having problems though.
I formated all partitions including the internal sdcard. Still no luck.
So far the only ROM that I got working is Eugene's 2.2..but I can't install applications with that one.
I tried installing the Bionix V Rom via ClockWork Recovery, but once it begins to Copy Files it errors out with an Error on line 13 and copy's out an error log. I posted a response to the thread about this ROM. I redownloaded to ensure it wasn't corrupted.
*****If you need more information on the EXACT Rom I installed prior to the brick here is the thread to the rom I installed. Maybe that will help you help me more ******
This is the rom I had before attempting to upgrade to Froyo:
http://forum.xda-developers.com/showthread.php?t=791478
I installed the Stock Recovery version.
Edit: I know this rom above is a kernal mod. I did flash the stock Vibrant kernel prior to installing the JFD ROM from this link: http://www.justanotherdev.slackdev.com/kernel-vibrant-stock.tar.md5.tar
crap dude do yo uhit repartition when u flash ka6 ? if so dont do so if its only update , dont check partiton if you flash just an update , hit partitoon if u flash offical release .
yes go back to jfd repartiton update to ka6 withou repartiton
bartek25 said:
crap dude do yo uhit repartition when u flash ka6 ? if so dont do so if its only update , dont check partiton if you flash just an update , hit partitoon if u flash offical release .
yes go back to jfd repartiton update to ka6 withou repartiton
Click to expand...
Click to collapse
When I install the JFD with or without repartition I get passed all the boot screens, but it screen goes black and buttons light up..Sorry if I am being a noob and missing something obvious...but I followed those instructions, and I did it multiple times as well.
FIXED!!!
I fixed it wohooo!!!! I flashed Eugene's Froyo that doesn't brick version then flash back to stock JFD and its working perfectly! Thanks XDA! Found out that a lot of people with this issue after having Voodoo installed and installing a different rom, and that this rom was made to fix the Voodoo brick. Funny thing is the Eugene's rom fails on recovery with errors in this case, but it still unbricks the phone lol
Ahhh see lagfix didnt disable..glad you got it working..
Thanks for your help. I now am using the Bionix-V Rom with the Dragon-Kernel Voodoo and let me tell you I love this phone even more now with this Rom. Loving the Gingerbread theme and it runs super fast. Stock is too slow for me lol Anyway, this is resolved no more offtopic posts lol...
ViralCipher said:
I fixed it wohooo!!!! I flashed Eugene's Froyo that doesn't brick version then flash back to stock JFD and its working perfectly! Thanks XDA! Found out that a lot of people with this issue after having Voodoo installed and installing a different rom, and that this rom was made to fix the Voodoo brick. Funny thing is the Eugene's rom fails on recovery with errors in this case, but it still unbricks the phone lol
Click to expand...
Click to collapse
would you please tell all the steps you did to make it work
Hi I'm a new member,
I rooted my fascinate easily enough. Then searching and learning about ROMs and Kernels I decided to do use ODIN CWM Recovery to 'backup' or whatever most forums tell you to before installing a new ROM. Point is my phone is stuck in manual boot mode and I cannot undo it.
I have tried multiple times using ODIN plus the four stock files
Stock-i500-VZW-Kernel.tar.md5
Stock-i500-VZW-pit.pit
Stock-i500-VZW-Recovery.tar.md5
Stock-i500-VZW-System.tar.md5
(I always would try to implement them in order pit/system, pit/kernel, pit/recovery)
Unfortunately after the first one (pit/system) ODIN says the process fails, I go ahead with the other two and they both amount to nothing happening. My phone does not reset or do anything for this matter and I am forced to shut down ODIN and unplug my phone (upon which it dies with no battery).
Then I put back in the battery and Im back to before in manual boot mode with
Reboot system Now
Apply sdcard:update.zip
wipe data/factory rset
wipe cache partition
Btw wiped data and wiped cache and it didn't help me =(.
Please someone help me, I really don't want this new phone to be dead... Thanks in advance
Oh and when I press "apply sdcard:update.zip" I receive
E:Can't mount \dev\block\vold\179:9
(No such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.
I really don't care at all about keeping the phone rooted or not or whatever. I just want to be able to make calls again!
So it looks like you're stuck in blue recovery ... sounds like something that Odining a stock package should fix.
Here is a nice thread for getting back to stock (it's a sticky in the general section). The packages include system, recovery, kernel, and radio in a single file (I've actually never odin'd four separate files to get back to stock, or even ever flashed a system-only file), though no pit file.
So open up odin with your phone in download mode (with the battery out, otherwise there's a small chance of odin stalling at the end), and use:
- either the DI01 all-in-one, EB01 all-in-one, or this DL09 package in PDA
- the pit file in PIT (the link says DI01/EB01 but it also works with DL09)
- check "re-partition" if it isn't already checked
- run odin and hopefully in five minutes your phone will work again If for some reason it doesn't, that thread has instructions for using heimdall, although I've never had to resort to it.
So try this and see if it works! (For which package to use, I'd suggest trying DL09 first (since you'll need it to get to the official froyo build) and DI01 if that fails. If you're wondering whether DL09+pit actually works, I've used it to get out of a "stuck in blue recovery after odining stuff" situation myself so yes, it works.)
Thank you for the response! It's encouraging to hear any support and I think yours is promising.
So unfortunately I tried D101 and no go. Turns out this was before I realized this was for 2.1 and I'd prefer 2.2 for the upgrades. Although would you suggest 2.1 for the purpose of rooting/ROMing/Kerneling in the future? I ask because I'm slowly gaining confidence that after fixing this I might be willing to try this again...
Odin (1.7 -> I decided at your poster friend's advice to upgrade from 1.3) worked well said 'pass' and everything. Unfortunately when booting my phone it went straight to the boot screen as always.
Meanwhile I'm downloading the EB01 and your suggested DL09 to test those two.
Hopefully one of those will work but if not, I guess I'll try that heimdall technique the poster suggested in the other forum. Hopefully not tho b/c it looks a bit more complicated.
I'll let ya know if one of these others works.
Yes it worked!! Thank you so much! I would buy you a round at the ale house if I could!
After running EB01 it worked (with the pit file going all the way back to factory settings). So I'm not sure what this means - maybe since it was after upgrading to 2.2 that my phone bugged out, it could only be restored to the 2.2 state which is EB01?? Idk, thanks anways.
Oh ya for the future if I try do this again - would you suggest I stay away from ROM Manager for backing up, which I believe is what started this problem in the first place? It seemed like ODIN did a fine job of managing my OS. Any thoughts? Thankss!!
mattjac1 said:
Yes it worked!! Thank you so much! I would buy you a round at the ale house if I could!
After running EB01 it worked (with the pit file going all the way back to factory settings). So I'm not sure what this means - maybe since it was after upgrading to 2.2 that my phone bugged out, it could only be restored to the 2.2 state which is EB01?? Idk, thanks anways.
Oh ya for the future if I try do this again - would you suggest I stay away from ROM Manager for backing up, which I believe is what started this problem in the first place? It seemed like ODIN did a fine job of managing my OS. Any thoughts? Thankss!!
Click to expand...
Click to collapse
Definately stay away from rom manager cwm if you have the voodoo lagfix enabled, but since all the new fascinate roms are edify scripted, flashing through cwm in rom manager would be ok.
Sent from my Froyo'd Evil Fascinate full of PB&J
Problem: Whenever I boot my phone after the galaxy S logo dissapears the screen stays black, while the backlight on the touch sensitive buttons still come on.
So here is my background on what I have done with the phone
- It is on 2.1 Eclair
- Everything was fine. I had it rooted and running Bionix.
- When the problem started was when I was trying to install a matrix boot image, and a theme for Bionix.
- First symptons would it wouldnt get past the Vibrant (text) startup screen.
- In response I Restored to the Clockwork mod Restore which would have brang my phone back to normal.
- It did bring my phone back to normal except for one thing, there was a bug that said my cards were full and couldnt install any apps.
- So I went back into clockwork mod recovery and figured out quickly it didnt recognize my sd ext. But when my phone was on it did.
I understand that this problem is very out of now where and probably isnt very solveable with just a one click program. But I would be very thankful if anyone could give me any kind of information on this. Even if it is just saying "Its a problem with your Kernel". AlthoughI hope to see downloads and full instructions.
Thank for reading this.
CWM recovery is not supposed to be able to see your external sd, you are only supposed to be able to flash files from the internal sd.
Thanks given.
Do you know of any method I can do to fix this
You could Odin back to stock 2.1, but first turn off lag fix if there is one via voodoo app.
You want to ODIN using stock firmware and the 512 pit file. This will repartition your internal SD. You will (should) not lose personal data such as pictures, music, files.... You ended up trying to flash a theme or bootanimation that was not compatiable and when you restored traces of it have been left behind.
ODIN is the best method in these situations. Note that in rare cases it may be neccessary to do a full SD reformat.
The first thing you want to do is back everything up to your computer. All those pictures, music anything you want saved and then and only then try the odin with 512 pit.
If you need the files for odin you can check my sig for the odin exe pit file and tar file, if instead you need instructions on how to use odin i'd check here: http://forum.xda-developers.com/showthread.php?p=13132341#post13132341
shreddintyres said:
If you need the files for odin you can check my sig for the odin exe pit file and tar file, if instead you need instructions on how to use odin i'd check here: http://forum.xda-developers.com/showthread.php?p=13132341#post13132341
Click to expand...
Click to collapse
Thanks for referring, I've also included the files in the guide just in case.
I certainly hope you aren't in a partitioning brick situation. I've seen this now twice and both were running Bionix 1.3.1 w/ Voodoo enabled and both somehow got certain bml partitions in an recognizable format by CWM and the Android OS. So far it hasn't been fixable with conventional flashing and PIT repartitioning. I will be trying a full JTAG re-write on one of the customer's phones tonight. I'll report back to this thread whether a JTAG session in which I fully re-write all addresses in the NAND block was able to fix this.
This marks the 3rd instance of what I'm referring to as partitioning bricking that was involved on a Vibrant that was running Bionix 1.3.1 at the time of the brick. I'm not blaming the ROM or the developer as I have used it with no issues and it's a great piece of work but perhaps the CWM packaged with it is allowing users to do things they don't intend to do causing this issue.
Thank you everyone very much for all the information and I was able to restore my phone back to stock 2.1 Eclair and then I flashed the rom bionix onto it.
I have given thanks to everyone that has posted from here on up ^^
Also if anyone is stuck in this situation also and Is reading this thing saying "what the heck I have no idea what to do". Just message me and I could full througho instructions.
Once again thank everyone and I have solved my problem. I am pretty sure it was the boot logo that made it happen.
Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737