Thx for your support help and patience to me, kind of new in this stuff, here is my question and I hope someone with absolutly real experience can answer.
Here is my reality, I have an Atrix with the new OTA update gingerbread, no UL BL, no root, no mod, clean...Can I still unlock the bootloader with the2dcourt guide in briefMobile? or I am stuck in the world of no mod forever? This is because I am tired of searching. someone guy s say you can, other say can´t (BriefMobile for example)...I really apreciate the help and a little guide just the names of treats or files I would search
I'm in the same boat, was waiting for the official update before making any mods, and I have to say, after a couple of hours on here this morning I'm a bit confused.
I got root fine (brief mobile's is solid for that) but now I'm trying to figure out the BL. Some posts say the OTA will hard brick if an SBF is flashed, others point to guides that use the SBF flash...
You can still unlock the BL with pudding and install CWM to flash custom rome. Use the preinstall method to root or use a pre-rooted custom rom.
DO NOT try to flash back to a stock froyo build or you will hard brick.
Incognitum said:
I'm in the same boat, was waiting for the official update before making any mods, and I have to say, after a couple of hours on here this morning I'm a bit confused.
I got root fine (brief mobile's is solid for that) but now I'm trying to figure out the BL. Some posts say the OTA will hard brick if an SBF is flashed, others point to guides that use the SBF flash...
Click to expand...
Click to collapse
You will only hard brick with the OTA if you attempt to flash back to 4.1.83 or earlier stock builds. You can use the fruity cake builds (as they have pudding in them) to go back if you had to.
From here on out you have to use pudding to unlock the boot loader to enable custom rom flashing. Just follow the pudding thread for more info on that.
You can't flash an older SBF file, that will cause you to brick. The SBF files you should avoid are pretty much all of them except Gingerbread, Unlock, and Radio SBF's.
You can unlock your device even though you've updated. But you're stuck with that bootloader forever, but you can always downgrade with a fruit cake I believe.
It all seems confusing at first, but you'll get the hang of it!
Sinful Animosity said:
It all seems confusing at first, but you'll get the hang of it!
Click to expand...
Click to collapse
Thanks for the vote of confidence! I had run several custom roms on my G1, but much less of that experience is proving to be helpful than I had hoped.
Thanks everyone for your speedy replies, I'll go give pudding a shot after breakfast.
if i flash pudding, just the unlock part and then fastboot the unlock....will i have to load a rom, or will gingerbread 2.34 still be there?
Okay, so the official pudding thread recommends beginners follow Brief Mobile's BL unlocking guide. I did, and got the message "oem unlock is not implemented". However, the 1st step in the guide is "If you’re on Gingerbread, skip to step 13". I am on GB from the OTA, but the guide was published a month ago, before the OTA update.
I'm guessing they said that because at the time it was published, you would need to have already done those steps to be on GB, so I may need to go back and follow through all the steps I skipped the first time. But if they had GB users skip steps because they would be harmful to GB phones, then that would be bad... Advice?
Incognitum said:
Okay, so the official pudding thread recommends beginners follow Brief Mobile's BL unlocking guide. I did, and got the message "oem unlock is not implemented". However, the 1st step in the guide is "If you’re on Gingerbread, skip to step 13". I am on GB from the OTA, but the guide was published a month ago, before the OTA update.
I'm guessing they said that because at the time it was published, you would need to have already done those steps to be on GB, so I may need to go back and follow through all the steps I skipped the first time. But if they had GB users skip steps because they would be harmful to GB phones, then that would be bad... Advice?
Click to expand...
Click to collapse
Go through the whole thing. If you soft brick, just run fastboot oem unlock again.
Thx for the help and quick response everybody, I will try to put all the step together and get the ULBL, xda always there indeed
fanhtc2 said:
Thx for the help and quick response everybody, I will try to put all the step together and get the ULBL, xda always there indeed
Click to expand...
Click to collapse
Thanks for opening this thread. I was gonna ask the same thing . Now I know what to do...I did OTA as well. Awesome that I can still unlock the bootloader.
Sent from my MB860 using XDA App
Step by step ULBL, Root for OTA GB
**I've been getting PMs for clarification: I didn't do a single mod to my phone before this morning. Stock ATT/Moto Atrix, installed stock ATT/Moto OTA GB update yesterday. Following these steps I am now BLUL and rooted.**
So here are all the steps needed to get a stock, OTA Gingerbread Atrix Unlocked and rooted:
1. Follow Brief Mobile's BL unlock guide here.
Things I found out that you may like to know:
-You will need to complete all steps *even the ones the guide says to skip*.
-When you enter your device unlock code, it is case sensitive; use caps-lock.
-The most recent SBF flash is in the XDA IHOP pudding thread, use this instead of the older file linked to in the Brief Mobile guide.
-When you are done, reboot will take a *long* time; just stay calm.
Edit: After 30 min on the dual core screen with the "unlocked" in the corner I pulled the battery... after reboot everything seems fine.
2. Follow Brief Mobile's guide to root here.
Thanks to brief mobile, and to the xda folks who held my hand through this whole thing the first time
Incognitum said:
So here are all the steps needed to get a stock, OTA Gingerbread Atrix Unlocked and rooted:
1. Follow Brief Mobile's BL unlock guide here.
Things I found out that you may like to know:
-You will need to complete all steps *even the ones the guide says to skip*.
-When you enter your device unlock code, it is case sensitive; use caps-lock.
-The most recent SBF flash is in the XDA IHOP pudding thread, use this instead of the older file linked to in the Brief Mobile guide.
-When you are done, reboot will take a *long* time; just stay calm.
2. Follow Brief Mobile's guide to root here.
Thanks to brief mobile, and to the xda folks who held my hand through this whole thing the first time
Click to expand...
Click to collapse
i love you. (no homo..not that theres anyway wrong with that)....THANKS!
defnow said:
i love you. (no homo..not that theres anyway wrong with that)....THANKS!
Click to expand...
Click to collapse
Hey, I appreciate it, and I'm glad to help! But honestly, I stopped at each step and asked the experts what to do, and then just wrote down in one post everything they told me.
I'm glad it's saving time for those coming behind me, but the real thanks belongs to the guys who helped me through it this morning; thanks again guys!
Hey guys, I came from the S3 to the note 2 and just had a few questions.
Before unlocking you need to root correct? I have a great guide, just wanted to make sure I root before I unlock.
second, is there a easy way to unlock? I couldnt find a guide around here, before for my s3 i used an app, but cant use it with the note 2.
Thanks,
I think most would tell you to search first...but In the original android development forum there is a root unlock thread thats super easy and like 2 or 3 steps just follow it and make sure all your drivers are up to date and its simple you have to be completely stock to do it and to make sure all you drivers are up to date I personaly made sure that rom toolbox worked and saw my phone first...but theres a huge thread on it
Root is easy with the exynos exploit. Simunlock is easy erasing nvram. Twrp is easily installed via goo. Note2 is a walk in the park.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
If you plan to unlock the bootloader either way, you might as well do it all at once. The only way to do this for verizon is Adam Outler's method. It is a very easy to follow two step process that will root and unlock your phone. Start bone stock, follow his directions takes 10 minutes tops. There is even a video (just search as noted above).
Don't root first, you'll run into problems and have to ODIN back to stock. I had the hardest time unlocking my phone all because I rooted it first. Once I got it back to stock it was simple. Follow the unlock bootloader thread in the original development sub forum.