Hi,
I don't like the new slide to unlock screen, my hands are too big, and the phone's screen is too sensitive, when my palm touches the edge the touch screen goes crazy and i can't slide to unlock.
is it possible to install the old lock screen?
thanks!
I am rooted on 1.57 and have version 2 of GingerBlur. I wanted to set up a pattern and fingerprint recognition for my lock screen. I have the pattern setup so when I go to settings and click OK so enroll new fingerprints the phone sort of freezes. I tap back and home a bunch and after a couple of seconds it goes back. It won;t let me swipe my fingerprints though and add that to the lock screen. What do I do?
Unfortunately I have a similar probelm, I think. After updating to GB2.5 last night my fingerprint scanner has become totally unresponsive. I tried to re-enable it but don't really know how I would do that. When I go to set up a fingerprint scan it basically acts like I'm not swiping my finger.
Any and all help would be greatly appreciated.
Same problem; Atrix gingerblur 2.5 flashed from stock 1.26.
Did you guys ever find a solution to this? I'm having the same exact issue...
I had the same issue last week until I did a SBF flash to 1.87 and then re-flashed to gingerblur 3.5.
Hey Guys,
First of all I'm on 2.3.4 AT&T stock ROM not unlocked modified in any way. I'm an international user so I just SIM UNLOCKED it so it can work with my operator.
I'm having a weird problem with my Atrix with the screen lock. It just doesn't work, no matter wich method I use (Fingerprint, password, PIN, etc). I turn on the screen and no lock method is asked it just goes directly to desktop.
I checked the security lock timer, it's dim out when fingerprint and with other methods its on When display is off but NO luck whatsoever.
Now the weird thing is that when I turn off the phone and turn it on again the phone ask me for my sim pin and then the screen lock method but that's it.
Maybe someone had seen this issue before and can give me a little hand?
Thanks.
Hello friends.
I just got my Motorolla Atrix 4G and im not abble to unlock it on the unlock screen, the touch just dont works at all there, even the capacitive buttons below not responding. The first day I managed to unlock it somehow after removing the battery, after that the unlock screen was working fine even when I lock the phone so I tough the problem was over and stated to install some basic apps. Like 2 days later the problem was back and now not even removing battery was working, sometimes I get to unlock it but now thats less and less posible. I read that installing an optional unlock screen could do the trick so I installed "Widget Locker" and worked some hours, then the same thing even the Widget Locker unlock screen dosnt respond. Its weird because once I manage to unlock it the touch works perfectly at all so that makes me think its a software/system problem.
Currently I cant unlock it at all, not even removing battery or anything.
The phone its used, I was thinking to bring it to a tech center on here and try root and installing a custom rom?
Thanks in advance for your help guys.
Bump...
Just to add... tried hard reset and didnt worked =/
¿Any sugestion? ¿Should I try an screen change?
Thanks.
BlazeHN said:
Hello friends.
I just got my Motorolla Atrix 4G and im not abble to unlock it on the unlock screen, the touch just dont works at all there, even the capacitive buttons below not responding. The first day I managed to unlock it somehow after removing the battery, after that the unlock screen was working fine even when I lock the phone so I tough the problem was over and stated to install some basic apps. Like 2 days later the problem was back and now not even removing battery was working, sometimes I get to unlock it but now thats less and less posible. I read that installing an optional unlock screen could do the trick so I installed "Widget Locker" and worked some hours, then the same thing even the Widget Locker unlock screen dosnt respond. Its weird because once I manage to unlock it the touch works perfectly at all so that makes me think its a software/system problem.
The phone its used, I dont have access to warranty or anything =/ I was thinking to bring it to a tech center on here and try root and installing a custom rom?
Thanks in advance for your help guys.
Click to expand...
Click to collapse
Does the problem occur when you move the phone into a vertical position (moving the lock screen)?
Try turning the screen off/on by using the power button (but don't turn the phone off) ... does this help?
When you installed a custom rom did you do a full system wipe? (goto 'mounts/storage' and format pre-install, data, system, osh, cache) before
installing rom.
Hello barry, thanks for the answer.
Yes, the problem occours in both horizontal and vertical positions.
If I press the power button the power off dialog appears on screen and im unable to touch the options, holding the power button dont turn the phone off so im forced to remove the battery to turn it off.
I havent installed a custom rom yet. Thats the next step ill be covering. I toke the phone to a tech center place and asked them to install a custom rom (since I cant persoanlly do the root and flash rom proces) They just told me that it didnt fixed it, but when i turn it on i saw the same Moto Blur interface wich make me think they didnt changed the rom at all...
Sadly when puting a SIM and starting the phone the Motorolla interface screen appeared, but... touch wasnt working there neither wich now starts to make me think it is a hardware problem after all... Im not sure anymore and dont know what to do now
Sorry for the long answer and the bad english.
sounds like your digitizer might need replaced, based off of what I read. just out of curiousity, what android version is it?
Stock Android Gingerbread 2.3 with Moto Blur UI
Digitizer? Not Screen then?
EDIT: Ohh nvm, Digitizer = Touchscreen right?
BlazeHN said:
Digitizer? Not Screen then?
EDIT: Ohh nvm, Digitizer = Touchscreen right?
Click to expand...
Click to collapse
Yes. Don't confuse the two, the screen has nothing to do with the digitizer, other than one being on top of the other physically.
Hello everyone,
I have a weird behavior when I have to enter my pin code to unlock my Mate 20 Pro. I have to press my finger for a long time for 2-5-8-0 numbers. For other figures no problem, they respond instantly.
To reproduce the problem, simply crack the unlock with the fingerprint and have the numeric keypad to type the unlock code.
I also notice that if I launch the camera from the lock screen, the trigger of photos galley a little, I have to leave my finger pressed a certain moment. On the other hand no problem when the phone is unlocked and I run the camera.
It's also complicated to pick up and slide to the right or left when I get a call on the screen locked.
*
Did some of you have the problem?
Thanks for your feedback.
Never experienced this... Try booting to safe mode and see if the problem persist.