Related
Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat
When i went to flash the latest update for the Energy ROM it didn't flash properly to my HD2 and now im getting the red,green,blue and white screen and it says
PB81100 HX-BC
SPL-142.HSPL XE
0X05
CotullaHSPL 0X30
Upgrade ROM code error
please try again
Ive tried reflashing but even though i have it plugged into the USB it wont recognise it, i took out the SD card and SIM card and done a hard resent but then i got some triangular type sign on the phone so took the battery out and put back in, held the button down button and im now back to the screen as like what ive posted about, this has never happened before as any ROM ive flashed has been succesful, ive done a search of the forum and cant come up with anything, can someone be of some assistance here please,cheers.
jonny68 said:
When i went to flash the latest update for the Energy ROM it didn't flash properly to my HD2 and now im getting the red,green,blue and white screen and it says
PB81100 HX-BC
SPL-142.HSPL XE
0X05
CotullaHSPL 0X30
Upgrade ROM code error
please try again
Ive tried reflashing but even though i have it plugged into the USB it wont recognise it, i took out the SD card and SIM card and done a hard resent but then i got some triangular type sign on the phone so took the battery out and put back in, held the button down button and im now back to the screen as like what ive posted about, this has never happened before as any ROM ive flashed has been succesful, ive done a search of the forum and cant come up with anything, can someone be of some assistance here please,cheers.
Click to expand...
Click to collapse
Hello!
Try this:
Full charge your phone's battery.
Download your stock ROM and install it by MicroSD method - it will erease your HSPL, so you will need to install it again.
Install the HSPL again.
Do a TASK29.
Now redownload your custom ROM and reflash it!
Here some helpfull links:
StockROM thread: http://forum.xda-developers.com/showthread.php?t=577717
How to flash custom ROMS: http://forum.xda-developers.com/showthread.php?t=609477
TASK29 thread: http://forum.xda-developers.com/showthread.php?t=644781
It will sove your problems =P
Thanks mate ill give this a go
jonny68 said:
Thanks mate ill give this a go
Click to expand...
Click to collapse
Please tell us if it works, ok?!
help!!!!
hi iv just flashed my hd2 using the sspl and now i cant phone people because of the radio how can i install it without the hspl because it wont let me install that because i havent got spl 1.42.000 or like the guy above he's doing it by the micro sd way how do u do this?? reply asap thanks
joshicole said:
hi iv just flashed my hd2 using the sspl and now i cant phone people because of the radio how can i install it without the hspl because it wont let me install that because i havent got spl 1.42.000 or like the guy above he's doing it by the micro sd way how do u do this?? reply asap thanks
Click to expand...
Click to collapse
Dude, READ my first post!! Here you can find some usefull links!!!
Your case is diferent the OP one, so I sugest you search and post in the right place.
I hope you understand.
Ps: I can't understand your problem with the phone. Try writing it in a better way!
digao100nocao said:
Please tell us if it works, ok?!
Click to expand...
Click to collapse
unfortunately when i go to download the stock ROM i downloaded from the HTC website it stays at 0% and then gives me an error message,tried numerous times but no luck, i was able to download HSPL3 though but that hasn't actually made any difference with regard to actually solving my problem,i done another search and tried numerous things but no luck, just have the multicoloured screen as before, have spent hours now, surely there has to be an easier solution to this as no doubt this has happened to a few people before!
jonny68 said:
unfortunately when i go to download the stock ROM i downloaded from the HTC website it stays at 0% and then gives me an error message,tried numerous times but no luck, i was able to download HSPL3 though but that hasn't actually made any difference with regard to actually solving my problem,i done another search and tried numerous things but no luck, just have the multicoloured screen as before, have spent hours now, surely there has to be an easier solution to this as no doubt this has happened to a few people before!
Click to expand...
Click to collapse
flashed htc stock by sd card? if yes, then its because the stock HTC rom isnt your phones stock, and teh first thing it does when flashing from sd is remove hspl, even though the rom itself fails to flash (because hspl is no longer there)
Boot into bootloader, see what spl says.
If it ends .0000 then use hspl2 to re apply hspl,
re-enter bootloader, connect usb, does 'serial' change to 'USB'?
If yes, try running your rom flash again, but do it over usb. (Can use the htc stock rom for this, for simplicity)
samsamuel said:
flashed htc stock by sd card? if yes, then its because the stock HTC rom isnt your phones stock, and teh first thing it does when flashing from sd is remove hspl, even though the rom itself fails to flash (because hspl is no longer there)
Boot into bootloader, see what spl says.
If it ends .0000 then use hspl2 to re apply hspl,
re-enter bootloader, connect usb, does 'serial' change to 'USB'?
If yes, try running your rom flash again, but do it over usb. (Can use the htc stock rom for this, for simplicity)
Click to expand...
Click to collapse
what do you mean by this mate?
Yeah the spl says spl-2.08.0000 8G XE
when i go to hspl2 to re apply hspl it gives me an error message saying i need to have SPL 142 on my device, this is doing my bleedin head in and ill never mess about with the dog and bone again if i manage to get this sorted after all this it costs too much and im without a phone now until this is sorted, cheers for your assistance mate
jonny68 said:
what do you mean by this mate?
Yeah the spl says spl-2.08.0000 8G XE
when i go to hspl2 to re apply hspl it gives me an error message saying i need to have SPL 142 on my device, this is doing my bleedin head in and ill never mess about with the dog and bone again if i manage to get this sorted after all this it costs too much and im without a phone now until this is sorted, cheers for your assistance mate
Click to expand...
Click to collapse
Mate, try HSPL3. It will work with your SPL (2.08.0000).
It smells like you have a bad flash, maybe your ROM image corrupt in download or in the transfer process.. It does not change the things, to fix it you have to "erease your NAND".
I told you to flash a stock Rom from SD to see if the error stops. If it stops, then you will have to install HSPL again, because it is ereased each time you flash a stock ROM from SDCard.
Then, the TASK29 process is the more important thing, because it will "erease" your NAND and will prepare the NAND blocks for the new flash.
And the CustomROM flash complete the process.
I hope it helps.
EDIT: Fell free only to install HSPL3 (2nd post of this thread http://forum.xda-developers.com/showthread.php?t=611433) and do a TASK29 (this thread http://forum.xda-developers.com/showthread.php?t=644781) before installing again your CustomROM. Those 3 steps are the important ones!
**DO NOT FORGET TO DOWNLOAD YOUR CUSTOMROM AGAIN, BECAUSE IT COULD BE A DOWNLOAD CORRUPTION PROBLEM, OK?
digao100nocao said:
Mate, try HSPL3. It will work with your SPL (2.08.0000).
It smells like you have a bad flash, maybe your ROM image corrupt in download or in the transfer process.. It does not change the things, to fix it you have to "erease your NAND".
I told you to flash a stock Rom from SD to see if the error stops. If it stops, then you will have to install HSPL again, because it is ereased each time you flash a stock ROM from SDCard.
Then, the TASK29 process is the more important thing, because it will "erease" your NAND and will prepare the NAND blocks for the new flash.
And the CustomROM flash complete the process.
I hope it helps.
Click to expand...
Click to collapse
right there has been some developments, HSPL3 has done something an the phoe is now turning on and off, so ill try and download the stock ROM now
if spl says 2.08.0000 then you have chosen teh wrong option in hspl3, you should have chosen 2.08.hspl.
.0000 is stock.
You do not need spl 1.42. to apply hspl, that is old info, hspl2 or hspl3 should work fine.
jonny68 said:
right there has been some developments, HSPL3 has done something an the phoe is now turning on and off, so ill try and download the stock ROM now
Click to expand...
Click to collapse
Man, if your phone is turning on and off it could be the uncharged battery.
Try charging your battery for about 1 hour before trying to reflash - do it with the phone turned off.
Again: Use HSPL2 or 3. Select 2.08.HSPL from the menu. And then TASK29..............
Thanks again guys its getting late so ill just leave the phone charging and get back to it after work tomorrow evening, again thanks for your assistance, still not there yet but hopefully by tomorrow evening the problem will be rectified.
jonny68 said:
Thanks again guys its getting late so ill just leave the phone charging and get back to it after work tomorrow evening, again thanks for your assistance, still not there yet but hopefully by tomorrow evening the problem will be rectified.
Click to expand...
Click to collapse
Relax dude.. You will kick this problems ass tomorrow!!
..........
Sorted!!
At last i have managed to solve the problem, basically i just extracted a stock ROM onto my micro SD card which was in my laptop,put SD card back in phone,went to bootloader, done the task 29, tried to flash Energy ROM 21911 Aug 1st update but having tried several times it was giving me an error message so last throw of the dice as it were i flashed the other Energy build 23569 and it worked, you;ve no idea how relieved i am i kept thining id have to leave the phone into repair which would cost an arm and a leg but thanks to the good people on here in particular digao100nocao and samsamuel and the search function was useful too i have solved the problem and ill ensure i always do a hard reset any time im flashing again as i believe that was what probably caused the ROM not to flash properly the first time (i never bothered doing a hard reset previously)
Virtual beers to everyone much obliged folks and if i can be of asisstance to anyone myself on here i will.
jonny68 said:
At last i have managed to solve the problem, basically i just extracted a stock ROM onto my micro SD card which was in my laptop,put SD card back in phone,went to bootloader, done the task 29, tried to flash Energy ROM 21911 Aug 1st update but having tried several times it was giving me an error message so last throw of the dice as it were i flashed the other Energy build 23569 and it worked, you;ve no idea how relieved i am i kept thining id have to leave the phone into repair which would cost an arm and a leg but thanks to the good people on here in particular digao100nocao and samsamuel and the search function was useful too i have solved the problem and ill ensure i always do a hard reset any time im flashing again as i believe that was what probably caused the ROM not to flash properly the first time (i never bothered doing a hard reset previously)
Virtual beers to everyone much obliged folks and if i can be of asisstance to anyone myself on here i will.
Click to expand...
Click to collapse
Good news my friend!
I'm happy that your problem is solved now.
Have a nice week
i have hspl 3 installed and have installed custom roms befor on this phone.
my problem now is that when i try to flash new rom it gets stuck on 0%, i have tried from the sd card and using RUU Custom installer with no luck .
also i have done a hard reset, also have tried to install HSPL3 again even that gets stuck at 0%.
Has anyone come across this before and is there a fix.
You said "i have tried from the sd card and using RUU Custom installer with no luck".
Why do you use RUU installer when flashing using a SD card?
All you need is a SD card with ROM in it, and start the flashing from the phone.
10pinto said:
Has anyone come across this before and is there a fix.
Click to expand...
Click to collapse
If you get really stuck just re-flash the rom that the phone came with - i.e. the official one from your mobile operator - and you should be fine. You can find them on the net if you don't have it (e.g. on the HTC web site).
You can then start putting custom roms back on it.
Good luck!
otherworld said:
If you get really stuck just re-flash the rom that the phone came with - i.e. the official one from your mobile operator - and you should be fine. You can find them on the net if you don't have it (e.g. on the HTC web site).
You can then start putting custom roms back on it.
Good luck!
Click to expand...
Click to collapse
yep tried that to, and it does not work.
it seem that my phone will not accept any roms just sits on 0%
i have tried the offical rom , custom roms via the sd card nothing works even tried to reflash hspl3.
Interesting, I'm having the same issue.
Grr.
Me too. I have rom 5.11.502.2 WWE, and I cannot get the RUU OR the Hard Rom flash to work.
This phone is a replacement for my Fuze that was stolen.
This newish phone is a WinMo 6.1 and I want to change the rom to 6.5-23568 Fuze Touch Pro.
WTF is making this stick at 0%?
cutenoob said:
Me too. I have rom 5.11.502.2 WWE, and I cannot get the RUU OR the Hard Rom flash to work.
This phone is a replacement for my Fuze that was stolen.
This newish phone is a WinMo 6.1 and I want to change the rom to 6.5-23568 Fuze Touch Pro.
WTF is making this stick at 0%?
Click to expand...
Click to collapse
if the version numbers you mentioned are correct, then you do not have a hd2.
Hi,
After months and months of installing custom ROMs, and I even ran Android for few months, I need to take it to service (I broke the screen).
I have tried (not successfully) to install SPL on it using HSPL3 (info got from here http://forum.xda-developers.com/showthread.php?t=609477). After I have opened HSPL3 and clicked first "Next" button, few seconds later it has generated an error. The phone remained in the 4 color screen showing me the HSPL version I have (SPL-1.42.HSPL XE). From here nothing works (hard reset doesn work, it takes to same screen).
PLEASE help. Nothing I read helped. Phone is unusable now.
Thank you in advance.
PS: I admit I am doing something wrong (since I can not fix it any more)...
[LE: I have copied "RUU_signed.nbh" renamed it, opened Bootloader and I was able to install SPL-1.42.0000. But now I am still stuck in same 4 color screen in the beginning... Hard Reset nor Soft reset do not work.]
Try to star in bootloader mode (vol down + power button), connect usb cable and install HSPL 2.08:
http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
dea.cristi said:
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
Click to expand...
Click to collapse
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
One more info your sd card has to be a normal one (1G or 2G) not HC
and after that reinstall hspl let me know if it was working
Regards,
Me
icsulescu said:
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Did you downloaded the rigth stock rom???
i had similar error trying to install a wwe on a portuguese HD2...
Then i downloaded the portuguese stock rom and worked.
I hope you can recover it.
See ya...
S_Phoenix said:
Did you downloaded the rigth stock rom???
Click to expand...
Click to collapse
I have bought the phone from Romania and this is the ROM I downloaded:
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
dea.cristi said:
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Click to expand...
Click to collapse
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
tidus18 said:
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
Click to expand...
Click to collapse
Yep, it seems this is the problem.
Find the first of the stock roms for the country the phone is locked to and flash it.
But try to flash the complete rom and not only the radio.
Try this older rom:
Code:
http://www.htc.com/ro/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Or this one:
http://www.4shared.com/file/236870807/d9482029/RUU_Leo_HTC_WWE_EastEurope_166.html
Or go here and flash older radios:
http://forum.xda-developers.com/showthread.php?t=611787&highlight=serial
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number. This will ensure that you are only allowed to download a ROM that is allowed on your phone. If you get an invalid message, then you need to try another ROM.
You may have a operator locked phone - you can only flash a O2, Vodafone, T-Mobile, etc ROM.
More ROMS
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
fred_up said:
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number.
Click to expand...
Click to collapse
Wish I could... If I enter the serial and try to download I always get the message "not available".
JWhipple said:
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
Click to expand...
Click to collapse
Thanks for your replies. However, I was able to fix it... by mistake.
After seeing that nothing works I connected the phone while it was showing that screen (4 colors) and I have flashed the stock ROM mentioned by me in previous posts using the flashing tool inside the package. Even if the main condition was to have it sync-ed, I have tried anyway and it worked (it is not sync-ed unless it boots up first).
Now it is functional again and ready for service.
Happy ending eventually.
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
gagi75 said:
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
Click to expand...
Click to collapse
If you don't know from where your device is coming from, with witch operator it is brand; than you can contact HTC.
And share them your S/N thy will be able to communicate you to witch provider your device is branded.
thanks m8 thanks again
unbricked Vibrates 7 times then freeze
so i did this and unbricked my phone but now my phone will Vibrates 7 times and then freeze???? help me plz
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't.
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
Click to expand...
Click to collapse
Sorry to hear your HD2 is not working right now Skellyyy. I am with T-Mobile so I am not familiar with O2 but do they not have an official ROM on their website? Do you have to download your official ROM from HTC? I tried to pull up the o2 website but for some reason it would not let me pull it up. I went to www.o2.co.uk/ and I got this error message.
Error 502 - Bad Request
The server could not resolve your request for uri: http://www.o2.co.uk/
Click to expand...
Click to collapse
The exe is how you run the update utility for that ROM too by the way. Well atleast it is if you are using a computer to flash it. You have to right click on it and click explore to find tbe RUU file.
Also seeing as you have the EU HD2 why not just download the official update from the T-Mobile website and try it?
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Skellyyy said:
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Click to expand...
Click to collapse
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
Skellyyy said:
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
Click to expand...
Click to collapse
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
Skellyyy said:
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Click to expand...
Click to collapse
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Click to expand...
Click to collapse
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
T-Macgnolia said:
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Click to expand...
Click to collapse
I've downloaded the RUU_Leo_1_5_TMOUS_2.10.531.1_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship .zip
Let's hope it works.
samsamuel said:
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there. I can't seem to find a way to change it to a .zip or extract it. It's a basic .exe file.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
Click to expand...
Click to collapse
Yeah no, that happened me before and I was only had 2.08.0000 but I'm sure I have 2.08.HSPL now. As I've said, it's happened before, in which all I did was do a soft reset and that worked. Doesn't seem to work now though.
I'm pretty sure MAGLDR is wiped now anyway, as when I plug a USB in while off it doesn't boot up, but just goes to a red LED. Is this normal yeah?
Just tried flashing the ROM I mentioned... the little progress bar showed... then the phone rebooted. Now it's back to SPL.
I don't there's anything I can do now is there? :/
ok, hang on, do you have a tmous, or a regular hd2 from t mobile?
I have a EU Leo. I don't know where it's from as I bought it second hand. The guy said it was bought on o2 Ireland.
Hey SKellyyy not saying I don't beleive you but just do this to confirm you have a DU HD2. I know for positive I have a T-Mobile HD2 as I bought mine brand new from a T-Mobile store. On your HD2 touch Start/Settings/scroll down to About Phone/Hardware Information. This is what mine says.
CPU
Qualcomm (R) 8250B
Speed
1024 MHz
RAM size
576MB
Flash memory size
1024 MB
Data bus
32 bits
Storage size
686.99 MB
Display resolution
480x800
Colors
65536
Bluetooth version
2.1/2.1+EDR
Bluetooth address
38:xx:xx:xx:xx:xx
Compare yours and let us know.
if the send key is white its regular, green its tmous. yours will be regular, from o2.which is why none of those roms you tried worked. only ONLY o2 roms will work unless hspl is there, anmd as soon as you flash any stock rom using sd card, it will remove hspl and then teh flash will fail, but hspl is already gone.
so, to get..
a winmo rom
bootloader - hspl4 - 2.08.hspl (3.03.hspl if you want a 3.14 rom) - bootloader - radio (if needed to update, see the rom thread) - bootloader - flash rom
to prep for nand android
bootloader - hspl4 - 2.08.hspl - bootloader - radio - bootloader - magldr - magldr usb flasher - flash CWM
bootloader -
Lol dude I'm pretty positive as it only has 512MB ROM and it has no T-mo on top and the buttons are white.
I've already tried to flash HSPL again but that was using the second version of the software (can't remember the name) and it failed. It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Where will I get a stock o2 ROM as the HTC website says "this software isn't available for your device"?
Skellyyy said:
It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Click to expand...
Click to collapse
thats more likely the comp, not the phone. all usual things, reinstall activesync/wmdc, dont use 64bit os if you can help it, firewalls off, etc etc etc. easiest first test is use a different pc.
It was fine flashing CWM on Friday. Currently can't use a different PC, will get one later and try again.
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
hspl is different than flashing roms / cwm.
flashing and sync will work through any old usb port, rarely need to turn off firewalls, whereas hspl is realllly choosy. gotta be a usb socket directly on the motherboard, hates 64bit win, times out before the phone has rebooted if you start it from winmo running, isnt all that happy if you have changed teh usb drivers for that particular port, say for mtty, or android, (each usb port has its own drivers associated with it, thats why swapping usb ports if it fails is always the first step, try them all)
I've tried three different PC's. Two desktops and one laptop, all plugged in to motherboard USB'a but none of them are installing HSPL. They're all just going up and down on the progress bar. Should I try HSPL4? I'm using the HSPL3 program.
No computers are running 64bit btw.
Is there anywhere I can just get the o2 ROM and try flash it?
Yea go to HTC website, support, pick phone, downloads, change dropdown to rom upgrades, operator name is in the title. You can also find them in the official roms thread in rom development section, and elsewhere in various threads.
Keep gour head up!
Skellyyy said:
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
Click to expand...
Click to collapse
Sorry you are having so much trouble out of your HD2. The HD2 is a great device but they are quirky as hell. I sure you will get it fixed, keep your head up man. Oh and don't give up on the HD2 just yet cause just like King Authur's Excalibure, The HD2 is a thing of legend.
Excilcior
Yeah, I'm currently looking to get a new HD2. Decided.
It's just the bootloader doing my head in, found the official ROM I need, but it'll only flash from PC and it's stuck at 0%. I need it as a .nbh so I can install from SD card. Do you know how I can do that if the RUU I downloaded is a .exe?
If you got RUU in .exe file install WinRar right click on the RUU file and choose "open with WinRar" then extract the .nbh file