I happen to smash the touchscreen glass. Everything is still working: touchscreen with multi-touch, the video screen is not damaged at all. It is just the top glass.
Any suggestions where to get the replacement and how to replace it?
altablet said:
I happen to smash the touchscreen glass. Everything is still working: touchscreen with multi-touch, the video screen is not damaged at all. It is just the top glass.
Any suggestions where to get the replacement and how to replace it?
Click to expand...
Click to collapse
Try Viewsonic customer service
or... buy another one and take the gla... nevermind.
So this confirms the answer to my post about whether it is plastic or glass? The Rain X poster said that screen was "plastic" but I thought it was glass....
Might be a slip of the keyboard. It sure pings like plastic. Maybe the original poster has a photo?
insight3fl said:
So this confirms the answer to my post about whether it is plastic or glass? The Rain X poster said that screen was "plastic" but I thought it was glass....
Click to expand...
Click to collapse
I should have used "plasticky" I don't know if the touch-panel substrate is polycarbonate or tempered glass/pyrex. My tooth test says probably some sort of glass but it's weirder than regular glass... sort of like a clear version of those unbreakable corel plates (tap your tooth onto the surface - you'll get what I mean). The plastic surface I was referring to in the Rain-X thread is the thin UV cured hard film surface that protects the flexible touch detection layers just below. Think of it as fancy thin clearcoat. I should have worded it more carefully (but it was the middle of the night and my brain had already shut down)
Broken glass
Here are some pictures pictures. There are some glass (ish?) particles under the screenprotecttor
Here are some more pictures of the broken glass
another batch of broken glass.
By the way Viewsonic was not able to help, nobody there was able to name any place to get the replacement screen to be installed myself or any service facility.
You can try to some chinese sites that sell zpad. They may also sell just the screen. I have seen some sites selling the screen for the gpad (the ipad clone) such as pandawill.com
Could not find any link to digitizer glass on pandawill.com or aliexpress .
Just for curiosity, how hard did the hit was; it would be intresting to know how durable our really g-pad are.
BTW: I am sorry about the screen.
I cracked my screen too... it's on the corner but it still works. But I rather get it repaired/replaced. I have yet to find any replacement screen online.. It's driving me nuts.
Go upstream
If VS can't help, try asking the integrator (Malata) or the touch-panel manufacturer (Sintek Photronics). Some contact info:
Malata: http://www.malata.com/en/Contactus.aspx
Sintek Photronics: http://www.sintek.com.tw/p1_8-english.htm
Not to durable.
Pazzu510 said:
Just for curiosity, how hard did the hit was; it would be intresting to know how durable our really g-pad are.
BTW: I am sorry about the screen.
Click to expand...
Click to collapse
I cracked my screen in the corner as well. I dropped the tab from about a foot onto a pillow, it fell off the pillow about an inch or two and the screen glass looks like I took a hammer to it. I could have been more careful for sure, but I have dropped electronics much, much harder and nothing. When it hit the floor I kept walking cause I thought it was nothing, when I looked at it in the morning it was FUBAR. If I can fix this I will certainly post details on how to fix it.
Touch screen
I broke mine too and got a replacement from Pandawill for $12, problem was the Post office managet to break it.
do you have a link to how/where you got the replacement screen?
Broken Glass Cover for the LCD
Has anyone had any luck finding a replacement for a broken glass cover for the LCD?
ralcocer said:
I broke mine too and got a replacement from Pandawill for $12, problem was the Post office managet to break it.
Click to expand...
Click to collapse
Under what category? Went to the site. A friend broke his by dropping it on pavement it slipped out his hand. The screen completely shattered gtab doesn't turn on.
Any luck
Hello all,
Has anyone had any luck finding replacement glass? I need to replace the digitizer.
Thanks.
ralcocer said:
I broke mine too and got a replacement from Pandawill for $12, problem was the Post office managet to break it.
Click to expand...
Click to collapse
I need a replacement as well. I also looed at pandawill and only saw replacements for Ipad. PLEASE help me! Everything still works on mine but my glass incompletely shattered.
Related
i accidentally let my HD fell on the ground one day when i get off my car..
when i picked it up i found that there's a crack on the screen, and the phone won't turn on until i pull out the battery and put it back
initially i thought it would be the damage to the LCD screen, but seeing the boot up screen i see no damage to the LCD, instead feels like there's a protection glass between the touch surface and the LCD screen... which is broken by now
is there any way to get it repaired? i'm living in China and i bought the HD from UK...
I think the part that you are looking for is the touch screen part. Try looking at ebay for some spare parts, maybe you can try to fix it yourself at home.
I am so sorry man. I can really feel you pain.
I would advice you to contact HTC directly and explain them the problem. I am sure they would get back to you with a solution.
Good Luck.
doctorcete said:
I think the part that you are looking for is the touch screen part. Try looking at ebay for some spare parts, maybe you can try to fix it yourself at home.
Click to expand...
Click to collapse
Hmm.. I thought the touchscreen shouldn't be usable if that's the touch screen part..? But it's still usable, just the crack is ugly on such an amazing device...
I don't think with my handwork I should try this myself disassembling my HD.. It would be stupid if I break something
VizagDude said:
I am so sorry man. I can really feel you pain.
I would advice you to contact HTC directly and explain them the problem. I am sure they would get back to you with a solution.
Good Luck.
Click to expand...
Click to collapse
Yeah, I'm trying to, but I don't know which HTC Care Center is the nearest from my place.. Maybe I should try to contact HK HTC Care instead..
Million thanks anyway.
pricey but ebay has what you are looking for
http://cgi.ebay.com/HTC-TOUCH-HD-T8...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
jonajuna said:
pricey but ebay has what you are looking for
http://cgi.ebay.com/HTC-TOUCH-HD-T8...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Hmm, thanks mate.
Anyway, I was just wondering, if that glass is just for protection for such a enormous screen (I noticed Diamond don't have that class, you can see some waves on the LCD if you press hard enough; and at the same time mine broken but touchscreen still as sensitive as ever), maybe we can just customize some tempered glass like the iPhone screen and replace the original one?
It's a shame that it's so fragile, with the phone selling such a price. I could buy an LCD TV with the same price..
Any technicians can confirm what does that glass actually exists for?
You need something like this:
http://cgi.ebay.com/HTC-HD-T8282-BL...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
maddie,
was your device protected by any kind of screen protector when the unfortunate event happened ?
Just curious !
gastko1 said:
You need something like this:
http://cgi.ebay.com/HTC-HD-T8282-BL...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Well, thanks a lot!
Does that include the glass between the surface and the LCD screen..?
spasovxda said:
maddie,
was your device protected by any kind of screen protector when the unfortunate event happened ?
Just curious !
Click to expand...
Click to collapse
Yeah, it's with screen protector.. But I don't think there's any help with just a slice of plastic sticking on the screen..
Anyway, the problem is I dropped it while it's in the stock pouch, screen parallel with the ground... Kinda lying on the ground
I AM SOORY , i spesk very little english and I am so sorry man. I can really feel you pain.
i have same problem with the glass that between the most surface layer and the LCD screen.
what happen with you ? and where ?
glass also broker
My phone screen also cracked but it works fine (both the touch function and the screen as no LCD spillage), the only thing is the hairline cracks on the screen (it seems that there is a glass between the touch screen and the lcd screen - i sent it to service here in Greece and said they need 320 Euros to replace the screen and casing !!
I'm looking for the best alternative solution on EBAY but i'm confused.
Is this what i need?
http://cgi.ebay.com/ws/eBayISAPI.dl...2BIA%2BMRU-15032&otn=4&ps=10#ebayphotohosting
glass also broken
My phone screen also cracked but it works fine (both the touch function and the screen as no LCD spillage), the only thing is the hairline cracks on the screen (it seems that there is a glass between the touch screen and the lcd screen - i sent it to service here in Greece and said they need 320 Euros to replace the screen and casing !!
I'm looking for the best alternative solution on EBAY but i'm confused.
Is this what i need?
http://cgi.ebay.com/ws/eBayISAPI.dl...2BIA%2BMRU-15032&otn=4&ps=10#ebayphotohosting
Hi there!
I didn't put a screen protector on my TD2 -and over time it has become more scratched than expected. I'd like to replace the front display -I guess that is the one called the digitizer, or?
http://cgi.ebay.com/Touch-Screen-Di...wItemQQptZPDA_Accessories?hash=item4837633bd0
What are the chances for getting an original HTC at ebay?
Did anybody do this replacement with success?
Cheers
No one?
check this out too!!!
more expensive and not a word about oem product!!!
So... oem digitizer with just 19$ .... hmmmm! don't know!!!!
Perhaps this guide can help you.
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Hopefully not.. But I think it's only glued to the frame.. I don't really know what kind of glue to use for the new one though...
ren28 said:
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Click to expand...
Click to collapse
Sorry to tell you all that the Digitizer is permanently attached with LCD. I know this because I was drop my D2 and went to service center. They change to front cover (case) which was broken when droped. when I get it back they give me back my old front cover and I notice that the digitizer is stick with over part.....
When I ask the service's counter. They told me that they have to change the new digitizer because it come with whole part.. not saparated.
Sorry for my english....
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
niknik76 said:
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
Click to expand...
Click to collapse
Sorry for lag of my understanding, Yes the digitizer is stick with front frame, not a LCD. In my case, I ask the service to change my front cover because it broke and they change the front cover + digitizer.... because it stick together.
Hope this would clear all out.
Hi guys,
i replaced today the broken digitizer of my topaz.
Got one for $60 from ebay, with a screen (i wasn't sure if it was a screen problem or digitizer so i got both.)
you need to unstick the old one from the housing and attach the new one. i didn't use extra glue/stick , since the old one was left on the casing.
cheers
Thanks mistral82cy! Thanks for sharing -now I feel a little more up to going ahead with the operation
Hi! Could you please tell me how much the service center charged you to get the new cover and digitizer installed?
I've to change mine, as well!
Thanks a lot
I would suggest finding the parts list for the phone and finding out exactly what digitizer is needed then buy one online from somewhere such as e-bay. I did this with my G1 replaced it myself and it worked wonderfully. Research before you buy otherwise you might end up buying the wrong one or a clone which doesnt work as well
I dun it myself, buying one digitizer from ebay, getting the old one out was a little tricky , but appart from that it was easy(and i had to do it again, as i dit not secure it properly and there was dust comming underneath the screen from the sides. Any questions you could ask, but it is pretty straight forward.
pistonripper changed his housing, so he would have also replaced his digitizer, so you might want to check with him
http://forum.xda-developers.com/showthread.php?t=572728
If you want to buy one, this would be a good choice
http://cnn.cn/shop/touch-diamond2-digitizer-p-6733.html
replace digitizer on your own!
Hello everyone!
My digitizer broke last week, because i droped my Diamond!
But don't worry I am a rookie in technical things and I managed it to replace my digitizer on my own.
Don't waste money on repair charge from repairshops! Ok... you loose your garantie but the Cellphone is allready old. The new HD2 is already available!
Just buy the digitizerscreen at ebay... i've paid 60 € and then use this manual:
http://www.pdacenter.ru/razborka/htc-touch-diamond2/
Now it works like before.
Bye Ghostina
HTC Pure Digitizer or LCD
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
darkside896 said:
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
Click to expand...
Click to collapse
It's a bit hard to see on the photos but if its new can you not return it? if not then you need to look closely between the digitizer and the screen and see if the damage is just the top layer or the screen, if it is the top layer then just replace your digitizer!
spammer said:
It is easy to do it, if you need, I can send you the instruction that how to change it to you. You can visit my website --spam-- for this product Touch Screen Digitizer For HTC Touch Diamond 2 II T5353
Hope that it will help you.
thanks
Click to expand...
Click to collapse
Every single post of yours is a website promotion.
Chill.
Out.
Seriously.
As always this site is a big help. Just ordered the items, and thanks to the guide I'm fairly confident I will pull it off. For me the bottom 2cm's of the screen have shifted about 1cm to the left somehow. The digitizer still works "perfectly" but it's kinda hard to hit the right buttons like that
hi
I have some scratchs on my screen and I am looking for a replacement digtizer.
I found several on ebay,
http://shop.ebay.com/i.html?_nkw=xp...+screen&_osacat=0&_trksid=p3286.c0.m270.l1313
Have anyone replaced the digitizer or know if this are original?
Thanks!
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
ClintonH said:
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
Click to expand...
Click to collapse
Hi
I removed the factory screen protector. when I got a couple of scratches I applied a new protector.
But the few scratches I have are ittitating me!!!!
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
--duplicate--
I wish one of these ebay listings gave a part number or model number for the digitizer... for obvious reasons.
trojjanhorse said:
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
Click to expand...
Click to collapse
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
mezo9090 said:
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
Click to expand...
Click to collapse
Hey Mezo,
The digitizer is factory glued with the top glass and is considered one piece since you can't separate the two. The LCD is separate from the digitizer. If your LCD is cracked, then your display will be distorted with lines across the screen. If your top glass is cracked, then your digitizer will still work since the digitizer is not as fragile as the top glass. So the question is, is the top glass cracked? Is the LCD display cracked as well? I know your digitizer will still be functioning but you might want to consider buying a new one as for the cracks may be unappealing and annoying.
I simply broke the top glass and I did not like the crack spanning across my screen so I got myself a new one.
If your LCD is damaged then you need to buy a new LCD which is not cheap... (over $100).
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
mezo9090 said:
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
Click to expand...
Click to collapse
Most likely you have broken the LCD. When dark pixels appear like that, it usually means that you've directly struck the LCD itself and damaged that area.
It was a thin line at first then some Ink started to flow and became bigger the next day.
So its the LCD?
should I fix it at the service center or i can replace it myself?
sent from my x10i that is banging for a 2.1 upgrade. ...
You can, in theory, fix it yourself but it'll be a biatch of a job. Use the X10 undressing post to find out how to actually take it to bits...
Then put the new LCD in.
only issue is finding somewhere that sells them... I don't know if they're a generic 854x480 lcd or what so...
To change LCD is very simple, but to change the digitizer is suicide. You will need to get a new LCD. I would buy one off of ebay and install it myself. I've been fixing phones for 2 years now so I had my share of experience but it may be difficult for you. The black liquid is due to the fact that LCD stands for "Liquid" Crystal Display
Good luck.
Okay, so my Terminator...errr, my son, managed to crack the heck out of his Nabi 2 digitizer screen. The LCD screen is fine and he can still use the Nabi, but I've noticed more and more cracks so I'm sure it's bound to break the LCD.
So, I went on eBay and ordered a piece of glass, but I'm not thinking it's not going to work. It was only like 13 bucks. I had a model number given to me after the fact (at070tn90), and I just looked and I didn't get that one. I'm just hoping it will work.
At any rate, I finally got the Nabi apart, but I've been fearful of removing the connectors for the screen. Can someone PLEASE tell me how to get the screen apart so I can try to replace it when I get the correct glass for it? PLEASE! There are NO Youtube vids for this...tons for the Nexus 7, but nada for Nabi.
Please help...I'm desperate! Thanks so much!!
The likelihood the digitizer isn't cracked is very low.
NABI2 touchscreen layering:
front glass..............thick (glue around outer most edges to frame)
airgap......................very thin (glue around edges)
digitizer glass........thin
lcd............................thick
I tried the same thing but the actual digitizer glass is like 1/10 the thickness of the front panel glass and glued to it on the edges. If the digitizer glass is not cracked, it will probably crack on attempted removal from the front panel. If the digitizer is fully working in-spite of the front glass cracking it may be possible to heat the front assembly up to the point the adhesive allows the glass to just fall out.... but as far as how close the glue melting point is to the melting point of the plastic frame is not something I know. The entire assembly is put together with some super strong double-sided sticky tape. If you can source just the digitizer and glass assembly I'd like to know.
Once one attempts a replacement and it doesn't work is it still possible to get Fuhu/Nabi to replace the screen (at reasonable cost)?
( If not you could just plug in a keyboard/mouse and use the hdmi out... would make a great XBMC server... once the port exists... )
.
Pictures?
oranrene7 said:
Okay, so my Terminator...errr, my son, managed to crack the heck out of his Nabi 2 digitizer screen. The LCD screen is fine and he can still use the Nabi, but I've noticed more and more cracks so I'm sure it's bound to break the LCD.
So, I went on eBay and ordered a piece of glass, but I'm not thinking it's not going to work. It was only like 13 bucks. I had a model number given to me after the fact (at070tn90), and I just looked and I didn't get that one. I'm just hoping it will work.
At any rate, I finally got the Nabi apart, but I've been fearful of removing the connectors for the screen. Can someone PLEASE tell me how to get the screen apart so I can try to replace it when I get the correct glass for it? PLEASE! There are NO Youtube vids for this...tons for the Nexus 7, but nada for Nabi.
Please help...I'm desperate! Thanks so much!!
Click to expand...
Click to collapse
Do you have any pictures of the digitizer and ribbon cable? Also location of the cable and size measurements.
manx_73 said:
Do you have any pictures of the digitizer and ribbon cable? Also location of the cable and size measurements.
Click to expand...
Click to collapse
I already put it back together because he was taking everyone's iPhones to play games on. lol The glass anatomizer (or whatever it's called), had a long thin strip and the LCD had a thicker one. Either way, the glass nowhere near fit. I had a feeling it was going to be too hard to replace anyway; hence the reason I can't seem to find a tutorial on fixing a Nabi.
And yes, Fuhu will fix it for like 85 bucks plus shipping...I only paid 90 for the tablet just recently (Craigslist). Oh well. I guess we'll just let him play till he cuts his finger.
Thank you both so much for your input. I appreciate it
Help replacing Nabi2 digitizer screen...
Any luck on this?
I have a Nabi 2 on which I've removed the broken digitizer. It was a bit more difficult than I had anticipated. I had to keep the heat gun on the glass and avoid heat-damage to the plastic. I used a small knife between the digitizer and the plastic frame. Next time, I may heat and bend a cheap knife into a Z shape to get under the glass without lifting it too much. I did get it out in some large pieces, but am not sure if I could do it intact if it hadn't been cracked.
Anyhow, the LCD looks great, but I can't seem to find the digitizer anywhere. The ribbon cable has a sticker with the following:
EP0700MLM1
12073*A1G.
272
View attachment 2625405
and on the back side above the chip, is:
40-90121-0
EDT REV.C
View attachment 2625413
on the inside glass is:
85701165
View attachment 2625417
The tiny text in the upper-right corner and written in mirror-image is:
XT2DA5A0118-EP0700 B1
I tried running the text through Google and aliexpress.com / alibaba.com, but to no avail. Anyone else have any luck?
Thanks,
Chip Stewart
ChipStewart said:
Any luck on this?
I have a Nabi 2 on which I've removed the broken digitizer. It was a bit more difficult than I had anticipated. I had to keep the heat gun on the glass and avoid heat-damage to the plastic. I used a small knife between the digitizer and the plastic frame. Next time, I may heat and bend a cheap knife into a Z shape to get under the glass without lifting it too much. I did get it out in some large pieces, but am not sure if I could do it intact if it hadn't been cracked.
Anyhow, the LCD looks great, but I can't seem to find the digitizer anywhere. The ribbon cable has a sticker with the following:
EP0700MLM1
12073*A1G.
272
View attachment 2625405
and on the back side above the chip, is:
40-90121-0
EDT REV.C
View attachment 2625413
on the inside glass is:
85701165
View attachment 2625417
The tiny text in the upper-right corner and written in mirror-image is:
XT2DA5A0118-EP0700 B1
I tried running the text through Google and aliexpress.com / alibaba.com, but to no avail. Anyone else have any luck?
Thanks,
Chip Stewart
Click to expand...
Click to collapse
I am also looking for the same digitizer model any luck? Anyone?
brianbri6 said:
I am also looking for the same digitizer model any luck? Anyone?
Click to expand...
Click to collapse
I am sorry for bringing back an old thread, but has anyone found a source for a proper replacement part for this? I am having a hell of a time finding a replacement part for the digitizer in my nabi2. It's as if nobody makes a replacement for the digitizers with EP0700MLM1 on the ribbon cable. About the only choice I have now is to find a used part, and pray that it also has the same kind of LCD screen within the housing.
--Rex
rex.torres said:
I am sorry for bringing back an old thread, but has anyone found a source for a proper replacement part for this? I am having a hell of a time finding a replacement part for the digitizer in my nabi2. It's as if nobody makes a replacement for the digitizers with EP0700MLM1 on the ribbon cable. About the only choice I have now is to find a used part, and pray that it also has the same kind of LCD screen within the housing.
--Rex
Click to expand...
Click to collapse
I am looking at a few on Fleabay now. You need to take yours apart and compare model numbers with the ones on Ebay. Just search ebay for Nabi 2 digitizer. about 20 results for it, ranging from $25 -65. The $65 one is a complete front panel minus the LCD. just unscrew the top panel and replace, it looks like.
Wow...I'm the original poster...and here I am years later still bothering with Nabi! lol In 2014, I went on Nabi's site and paid $60 to have the digitizer replaced. I never sent the Nabi in because a friend of mine gave me his kid's Nabi to use for parts (he couldn't get it to charge any longer). I took the entire front panel with LCD and digitizer and replaced it with mine. Worked like a charm...until my younger son stepped on it...on purpose! Lil turd! So, here I am again trying to fix the screen, BUT, this time I noted that I needed the LCD and the digitizer (the ribbon on the LCD was breaking off - not sure how that could have happened). At any rate, I ordered both the digitizer and LCD. I replaced them both and it's a no-go...not working. I still have it apart, but I have the cables plugged in, so when I move the screen around, the Nabi screen will come up, but the touchscreen isn't working. I may be sending the digitizer back, but I'm wondering if it's because of how they are lying on one another. Does anyone know if maybe the touchscreen doesn't work if it's too close or too far from the LCD screen. I don't mean by an obvious amount - I mean is there a "specific" amount of space. I am trying to get it in the casing exactly like it was before, but I don't want to do anything permanent until I know it's working 100%.
Also, you can easily and cheaply get the LCD and digitizer for the Nabi now - just stinks you have to order it from China and it takes forever to get here! I can only imagine how long a return/replacement is going to take. Ugh!
Oh, and Nabi has yet to return my $60 bucks...I have spent way too much on this tablet!
I ended up having to match my part number to a used but good part off of ebay. I had ordered several "new" digitizers and they never worked. There seemed to have been a design change somewhere along the line, or some missing information that made mine not work with the "new" parts available at the time.
However, to answer your question, the digitizer will work completely separated from the LCD as long as the ribbon cable is attached (of course). Rather than reassembling everything, I would only connect the digitizer to see if it worked. When I finally found one that worked, I then committed to doing the full repair.
It was a very painful process.
Is it an easy thing to take apart and put bk together if you have never done this before my daughter stood on her Nabi accident it was under her comfort blankie opps screen cracked but works fine she's only 2 ( well advanced for her age) soI dnt want her to use it incase she cuts her tiny fingers doesn't feel sharp but dnt want to risk it can't find any view on u tube still many years on be nice if someone would do one haha
Honestly...
It was a pain in the ass to remove the glass / digitizer from the nabi. If you're not careful--as I was--it is real easy to deform the plastic bezel that the glass / digitizer and LCD reside in. I ended up having to buy a replacement bezel that already had a digitizer and LCD attached to it. The LCD was DOA, but the one from my original was fine, so I begrudgingly transplanted that too.
Test the digitizer FIRST before committing to installing it on the plastic bezel.
Hello guys & gals,
So as you all may know how fragile this phone is & with the lack of a full surround case (and brains) the top of the phone is essentially asking to be smashed.
So it finally happened, as I was walking, the phone slipped out of my pocket & landed on the pavement, the top right hand portion of the glass is chipped & there's a very small hairline crack on the glass itself, the digitizer itself is fine, however the front glass absorbed the damage causing it to crack & chip, I was wondering if it's actually possible to just heat the front glass, remove it & stick on a new glass like the one available in the link: https://www.ebay.com/itm/Display-To...202764?hash=item3d793f64cc:g:B7oAAOSwhJFb5xgu
Or would I have to go out of my way to get an entire screen & tear down the phone to replace it, there aren't many videos on this phones repair, plus I can only seem to find the front glass. Any information & help will be appreciated.
Here, they sell it the screen
https://es.aliexpress.com/item/Orig...-ctil-digitalizador-asamblea/32916778043.html
Glass repair
Hey
I was looking for the answer to the same question. I went ahead and bought replacement glass off ebay. I'll be giving it a try this evening/tomorrow. I'll let you know how it goes.
Endaemoniada said:
Glass repair
Hey
I was looking for the answer to the same question. I went ahead and bought replacement glass off ebay. I'll be giving it a try this evening/tomorrow. I'll let you know how it goes.
Click to expand...
Click to collapse
Hey were you successful in replacing the glass? I see some on Amazon for $30. I'm in the same boat now. If i have to replace the whole display for several hundred dollars I'd rather just bin the phone and buy a different brand.